J&W JW-H67M-USB3 User Manual - page 29
- 2 -
JW-H67M-USB3 User's Manual
4.5.7 Security
Aptio Setup Utility - Copyright (C) 2010 American Megatrends,Inc.
Main
Advance
d
Chipset
Boot
Security
Save & Exit OC Drive
Password Description
If only the Administrator'password is set,then this
only limits access to Setup and is only asked for
when entering Setup.
If only power on password and must be entered to
boot or enter Setup. In Setup the User will have
Admimistrator rights.
The password must be 3 to 20 characters long.
Set Setup Administrator
Password.
→ ←
: Select Scree
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Administrator Password
User Password
Version 2.02.1205. (C)Copyright 2010 American Megatrends, Inc.
• Administrator Password
This option is used to set an administrator password, as the following steps:
1. Move the cursor to the Administrator Password item, press
2. In the "Create New Password" dialog box, enter 3 to 20 characters or numbers to be
setted, press
password is correct.
If the password is correct, the system will prompt "Password installed ", the password is set
successfully.
If the prompt" Invalid Password! ", entering the password does not match, please enter it
again.
To clear the system administrator password, select "Administrator Password", in "Enter Current
Password" dialog box enter the old password, and in the "Create New Password "
,password is cleared.
• User Password
The option be used to set the user password, setting steps is same with "Administrator
Password"
Setting way.
Press < ESC> key to return to the security menu