Jabbla Tellus 5 User Manual - page 21
Tellus 5
D
Getting started
6
Control options
19
6
Control options
6.1
Touch-screen control
The way to make a selection on the screen can be customized by the user. See
the Mind Express Help function.
Check that the protective film has been removed from the device.
Do not use sharp tools, to prevent scratching the touch screen.
Tap with your finger, not with your fingernail!
Make sure the touch screen does not come into contact with water.
Use the following techniques to operate the touch screen:
The option to drag in communication grids, can be set in Mind Express.
S
EE
ALSO
:
"Using the on-screen keyboard" on page 20
6.2
Mouse control
The Tellus can be operated with a mouse (or via head control, eye control). The
device has several USB ports for connecting a USB-compatible mouse.
To activate the mouse control, select Mind Express Edit > Mouse.
To set the mouse control, select Mind Express Tools > Mouse selection.
For more information on activating and setting up the mouse control in
Mind Express, see the Mind Express Help function.
S
EE
ALSO
:
"Touch-screen control" on page 19
6.3
Scan control
The Tellus can be operated in Mind Express by scanning. In Mind Express, you
can specify how you want to scan. For scanning, 1 or 2 switches that are
directly connected to the Tellus (13) (14) can be used.
To activate scan control, select from Mind Express Edit > Scanning.
To set the scan control, select from Mind Express Tools > Scanning selection.
For more information on activating and setting up the scan control in
Mind Express, see the Mind Express Help function.
To exit scan mode, you need to hold and press the middle button (2) for
1.5 sec. Or you can use the ESC key on a connected keyboard.
Action
Technique
Leftclick
Tap once on the object with your finger.
Double-click
Give two short,quick taps on the object with your finger.
Dragging
To move a (draggable) object, touch the object and drag it to the
desired location.
Rightclick
•
Touch the object and continue to hold that position until a circle
appears around the object. Then release the object to generate the
rightclick.
•
Press the center button on the side and then touch the object. After
selecting, the left mouse button is active again. This does not work
if the center button is disabled.