Jabra GN 6110 User Manual

Other manuals for GN 6110: Brochure, User Manual, User Manual
Manual is about: GN Netcom GN 6110: User Guide

Summary of GN 6110

  • Page 1

    2 english – gn 6110 user guide this user guide provides you with information on setting up, using and maintaining your gn 6110. Contents 1. Product information 1.1 gn 6110 – what’s in the box 1.2 parts and signatures 2. Assembling your gn 6110 2.1 setting up for desk telephone use connecting cords c...

  • Page 2

    3 1.1 gn 6110 – what’s in the box 1 gn 6110 headset, with built-in rechargeable battery 2 gn 6110 base (connectivity unit) 3 connection cord for telephone connection 4 power adapter with cord 5 quick set up guide 6 user guide 7 cord management strips 8 headset travel charger (90-240 v) 1.2 gn 6110 –...

  • Page 3

    4 2. Assembling your gn 6110 first assemble your gn 6110 to work with your desk telephone, and then set it up to work with your mobile phone. The gn 6110 supports the gn 1000 remote handset lifter for desk telephones. See section 4.3 for hook switch set up instructions and use. 2.1 setting up for de...

  • Page 4

    5 pairing of headset to the base and verifying pairing the headset and the base in their original product box have been factory-paired to ensure proper functioning of your gn 6110. You do not need to pair these two devices, and you may now proceed to the clear dial tone adjustment section. If origin...

  • Page 5

    6 2.2 setting up for mobile telephone use the gn 6110 headset is also compatible with bluetooth mobile phones. The mobile phone you use with your gn 6110 must be bluetooth technology-equipped. Setting up the headset to a mobile phone (pairing) before using your headset for the fi rst time with a mob...

  • Page 6

    7 turning headset off: close the headset boom arm. The headset indicator lights for 2 seconds, after which it will turn off. Making calls: 1. With the boom arm open, press the multifunc- tion button on either the headset [c] or the base [b]. An audible tone will be heard and the con- nection will be...

  • Page 7

    8 3.2 operation – with mobile telephone if your headset is in its base, press the release headset button to free the headset before using it. Turning headset on: open the headset boom arm. The headset indicator lights for 2 seconds, and then continue to fl ash slowly as long as the headset is on. Tu...

  • Page 8

    9 headset mobile phone switching (while on a call). To switch from using the headset to mobile phone during a call: 1. Terminate the link between the headset and the mobile phone by closing the headset boom arm [a] note: do not press the multifunction button. 2. The mobile phone will prompt you to c...

  • Page 9

    10 you will need to make 2 calls to adjust the volume match, one using your mobile phone and the other using the desk telephone. 1. Open the compartment cover on the bottom of the base and locate the black volume match button [a] 2. Using your mobile telephone, make an initial test call to someone a...

  • Page 10

    11 to connect your gn 1000 to the gn 6110, complete the following: 1. Connect the gn 1000’s connector cord to the yellow-marked hook switch [aux] socket on the bottom of the base [a]. 2. Consult the gn 1000 user guide to complete the set up. Note: if you cannot locate the gn 1000 product box and/or ...

  • Page 11

    12 2. You may continue wearing your headset, or replace the (closed) headset boom arm in the base for charging. Headset handset switching (while on a call) to switch from using the headset to the handset during a call: 1. Pick up the telephone’s handset [a]. 2. Close the headset boom arm [b], or pre...

  • Page 12

    13 battery charge indication the headset indicator lights to indicate charging, and will turn off when fully charged. The 4 lights of the battery indicator show the approximate battery charge level of the headset: • 1 lit indicator represents 25% of a full charge (will fl ash if less than 25%) • 4 l...

  • Page 13

    14 successful pairing will be indicated by 10 rapid fl ashes of both the headset indicator and the pairing indicator. A beep will also be heard in the headset. Verifying pairing to verify pairing, create an audio link between the headset and base by completing the following: 1. With the boom arm ope...

  • Page 14

    15 the headset’s audio indicators: headset action audio indication volume limit repeated single high tone when min. Or max. Limits achieved (when button is pressed) low battery tone two rapid high tones repeated every 20 seconds out of range no audio indications; gradual deterioration of audio quali...

  • Page 15

    16 base’s multifunction indicator multifunction indicator battery indication number of lit indicators indicates level of charge 1 fl ashing indicator 1 lit indicator = 25% charged 2 lit indicators = 50% charged 3 lit indicators = 75% charged 4 lit indicators = 100% charged all base’s indicators powe...

  • Page 16

    17 what is the clear dial tone adjustment for? Desk telephones operate on a wide range of standards and use different kinds of internal compo- nents. The gn 6110 works with a very wide range of desk telephones, but it still must be set to match your desk telephone’s standard. The gn 6110’s terminati...

  • Page 17

    18 declaration this product is ce marked according to the provisions of the r & tte directive (99/5/ec). Hereby, gn netcom as declares that this product is in compliance with the essential requirements and other relevant provisions of directive 1999/5/ec. Please note that this product uses radio fre...

  • Page 18

    19 5. If the telephone company requests information on what equipment is connected to their lines, inform them of: (a) the telephone number that this unit is connected to. (b) the fcc registration number located on the label. Canada ic notice to users/product statements operation is subject to the f...