Jabra GN 6210 Troubleshooting
GN 6210 Troubleshooting
GN 6210 - Bluetooth
®
Wireless Headset for use in the
office, at home or even on the move
USE WITH MOBILE PHONES AND PAIRING
Does the GN 6210 work the same way with all Bluetooth-enabled
mobile phones?
Mobile phones are produced by many manufacturers and come in a very wide
range of makes and models. While the GN 6210 is compatible with them, there
may be slight variances with setting up and using your GN 6210 with your
specific mobile phone. For example, procedures for pairing your headset to
your mobile phone and the pairing profile used by your mobile can vary
depending on the mobile phone type.
On some mobile phones, you may have to delete former unused pairings in
order to pair with the GN 6210.
See the GN 6210 Pairing Guide for mobile phone-specific pairing instructions,
which is posted at
www.gnnetcom.com/gn6210/support/
.
Pairing my GN 6210 with my mobile phone was unsuccessful, what
should I do?
If your headset doesn’t work with or works poorly with your mobile phone,
delete any existing GN 6210 pairing and check the compatibility chart from the
Pairing Guide, which is posted at
www.gnnetcom.com/gn6210/support/
.
When pairing the headset to a mobile phone, remember to either disconnect
the power supply to the base unit or ensure the headset is at least 10 m (30
ft.) away from the base.
My headset’s pairing to the base has been lost or doesn’t seem to work
properly, what should I do?
You may need to reset both your base unit and headset. To reset your base,
use a pointed object (such as an unfolded paperclip) to press the base’s reset
button (on bottom of base unit) for 2 seconds. To reset the headset, press and
hold the headset’s volume down button and then simultaneously press the
headset’s Multifunction button down for 5 seconds.
To use my headset at home as well as in the office, can I pair my
headset to several bases?
Yes, you can use the same headset on up to 2 base units. For example, you
may have one base unit at the office and another at home.