Jabra GN9330e Quick Start Manual - page 3
2.2
2.4-2.5
2.3
2.1
1 sec )))
2.6-2.7
25 %
100 %
Setting up
安装
2
See Guide for
additional func-
tions for setting
up the GN1000
and an external
OLI.
请参阅《参考指
南》,附加功能的
指南
GN1000
和外部
OLI
的
信息。
Charging
充电
Setting up
安装
安装
[2.1]
拔下听筒线。
[2.2]
将听筒线插入机座。
[2.3]
将机座线插入电话。
注:如果电话有单独的耳麦端口,请参阅
《附加功能的指南》,了解如何设置和使用
此端口。
连接至电源
[2.4]
将电源适配器插入机座。
[2.5]
将电源适配器插入电源插座。
4
电话机指示灯亮起
充电
[2.6]
将耳麦放入机座中,进行充
电。所有电池指示灯二极管将亮起
1
秒钟。
[2.7]
在使用耳麦之前至少将其充电
30
分钟。完全充电需要
3
个小时。
Setting up
[2.1] Unplug handset cord.
[2.2] Plug handset cord to base.
[2.3] Plug base’s cord to telephone.
Note: If your telephone has a separate
headset port, please refer to the ”Guide
for additional functions” for setting up and
using this port.
Connecting to power
[2.4] Plug power adapter into base.
[2.5] Plug power adapter into electrical
outlet.
4
Telephone button will light.
Charging
[2.6] Place headset in base to charge.
All Battery indicator diodes will light
for 1 sec.
[2.7] Charge headset for minimum 30
min. before use. A full charge takes
3 h.
English
中文
The number
of lit battery
indicator diodes
shows level of
charge, even
with headset
out of base.
耳麦不在机座上
时,亮起的电池
指示灯二极管的
数目也可显示充
电水平。