Jabra GN9330e Quick Start Manual - page 4
3.1
3.2
3.3-3.4
A
B
C
D
E
F
G
3.5
3.6
3.7
3.8
Optimizing
优化
3
Clear dial tone adjustment
拨号音清晰度调节
Microphone volume setting
传送音量设置
Adjusting speaker volume
调节扬声器音量
See www.jabra.
com for more
about clear dial
tone adjust-
ment.
请参阅
www.
jabra.com
,了解
关于拨号音清晰
度调节的详细
信息。
拨号音清晰度调节
[3.1]
戴上耳麦。
[3.2]
拿起听筒,听耳麦中的拨号
音。
4
如果听不到拨号音或听到的拨号音
不清晰,请继续按
3.3
调节。
[3.3]
取下机座盖,并找到拨号音清
晰度调节开关。
[3.4]
将开关从
7
个档位
(A-G)
上
逐一滑过,直到拨号音清晰为止。如
果在位置
A
和在位置
G
处的拨号
音清晰度相同,则将开关置于
A
。
传送音量设置
要使对方清晰地听到您的声音,该
设置很关键。
[3.5]
戴上耳麦。
[3.6]
向测试人员拨打电话。
[3.7]
调节麦克风音量调节器,
直到测试人员确认您的的音量合适
为止。
调节扬声器音量
[3.8]
升/降音量开关以调节传送音
量。
4
耳麦中的声音指出音量级别。
Clear dial tone adjustment
[3.1] Put on headset.
[3.2] Lift handset and listen for dial
tone in headset.
4
If no/unclear dial tone is heard,
continue adjustment to 3.3.
[3.3] Remove base cover and locate
clear dial tone switch.
[3.4] Slide the switch (through A-G
settings) until dial tone is clear. If dial
tone is just as clear in position A as in
position G, leave switch in position A.
Microrhone volume setting
This setting is critical for your voice
to be heard clearly.
[3.5] Put on headset.
[3.6] Make a call to someone who will
act as test person.
[3.7] Adjust microphone volume until
your test person confirms your voice is
at appropriate volume.
Adjusting speaker volume
[3.8] Push volume switch up/down to
adjust transmit volume.
4
Tones in headset indicate volume
level.
English
中文