Jackson Systems WCT-32 User Manual - Low Battery
5418 Elmwood Avenue, Indianapolis, IN 46203-6025
06-1056-042810
These days will be displayed on the thermostat.
The example below shows a schedule being
applied to Monday through Friday.
PM
Mo
Schedule
Tu We Th Fr
CANCEL
NEXT
ENTER
Pressing the ENTER key will copy and save the
schedule for the days of the week selected. After
the ENTER key is pressed, the thermostat will
return to normal operation To change the
schedule for other days of the week, repeat the
same programming steps.
4
Sa Su
CANCEL
NEXT
ENTER
Low Battery
Indication
If the battery voltage drops to where it could
interfere with reliable operation, the LCD will
alternately display Lo in place of the Inside
temperature. Replace batteries immediately.
Inside
Day
Th
AM
Heat
AUTO
Set To
MENU
HOLD
NEXT
ENTER
Schedule
Reviewing the Time and
Temperature Schedule
Press the MENU key 4 times until the first
schedule is displayed as shown below. The
display will show the Monday morning scheduled
start time and heating temperature. setting.
Continuing pressing the NEXT key to display the
morning, day, evening and night schedule along
with the heating and cooling temperatures for
each day of the week. Press the CANCEL key
at any time to exit and return the thermostat to
normal operation.
Mo
Schedule Morn
AM
Heat
Set To
CANCEL
NEXT
All rights reserved.
© Jackson Systems, LLC 2010
Intellectual rights apply.
After the Night schedule is completed, press the
next key and Mo (Monday) will appear on the
LCD. Continue to press the NEXT key and use
the Up and Down keys to turn days ON or OFF.
The schedule will be applied to the days that are
ON. In the example above, Sa (Saturday) and
Su (Sunday) have been selected. To save the
schedule, press the ENTER key and the
thermostat will resume normal operation. Each
day of the week can have a separate schedule if
required. Just program the schedule and select
the day then press the ENTER key.
Schedule Morn
AM
Night