1. DL manuals
  2. Jacobsen
  3. Lawn Mower
  4. R-311T
  5. Parts & Maintenance Manual

Jacobsen R-311T Parts & Maintenance Manual

Manual is about: Rotary Mower with folding ROPS

Summary of R-311T

  • Page 1

    Parts & maintenance manual manuale di manutenzione e parti when performance matters. ™ gb it united italy 19 17 18 13 6 5 9 15 16 7 8 10 4 3 11 1 - includes items 3 - 16 avvertenza questa macchina può causare gravi infortuni se viene utilizzata in modo errato. Prima di accingersi ad approntare, usar...

  • Page 2

    © copyright 2010, jacobsen, a textron company. “all rights reserved, including the right to reproduce this material or portions thereof in any form.” this manual contains adjustment, maintenance, troubleshooting instructions, and parts list for your new jacobsen machine. This manual should be stored...

  • Page 3

    En-3 table of contents 1 safety 1.1 operating safety ...................................................  4 1.2 important safety notes  ..........................................5 2 specifications 2.1 product identification ............................................  6 2.2 engine ..........

  • Page 4: 1    Safety

    1 safety en-4 1 safety 1.1 operating safety ______________________________________________________ 1. Safety is dependent upon the awareness, concern, and prudence of those who operate or service the equipment. Never allow minors to operate any equipment. 2. It is your responsibility to read this ma...

  • Page 5: Safety    1

    Safety 1 en-5 1.2 important safety notes ________________________________________________ this safety alert symbol is used to alert you to potential hazards. Danger - indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning - indicates a pote...

  • Page 6: 2    Specifications

    2 specifications en-6 2 specifications 2.1 product identification_________________________________________________ 69171 .............................. R-311t with folding rops. Serial number ................. An identification plate, like the one shown, listing the serial number, is attached to the...

  • Page 7: Specifications    2

    Specifications 2 en-7 2.4 cutting units ___________________________________________________________ type ................................ Three fully floating decks width: front deck ................. 64 in. (1625 mm) wing decks ............... 42 in. (1067 mm) cutting width: front and both wings . ...

  • Page 8: 2    Specifications

    2 specifications en-8 2.7 declaration of conformity ____________________________________________ declaration of conformity ▪ ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ ▪ prohlÁŠenÍ o shod Ě ▪ overensstemmelseserklÆring ▪ conformiteitsverklaring ▪ vastavusdeklaratsioon ▪ vaatimustenmukaisuusvakuutus ▪ declaration de...

  • Page 9: Specifications    2

    Specifications 2 en-9 harmonised standards used ▪ Използвани хармонизирани стандарти ▪ použité harmonizované normy ▪ brugte harmoniserede standarder ▪ gebruikte geharmoniseerde standaards ▪ kasutatud ühtlustatud standardid ▪ käytetyt yhdenmukaistetut standardit ▪ normes harmonisées utilisées ▪ angew...

  • Page 10: 3    Adjustments

    3 adjustments en-10 3 adjustments 3.1 general________________________________________________________________ 1. Adjustments and maintenance should always be performed by a qualified technician. If proper adjustment cannot be made, contact an authorized jacobsen dealer. 2. Replace, do not adjust, wo...

  • Page 11: Adjustments    3

    Adjustments 3 en-11 3.4 brake pedal ____________________________________________________________ adjust brakes after replacing or servicing brake assembly, or if pedal travel becomes excessive. 1. When installing new brake pads, burnish pads by driving mower at mowing speed while applying a slight p...

  • Page 12: 3    Adjustments

    3 adjustments en-12 3.6 cruise control switch_________________________________________________ if the cruise control does not disengage when brake pedal is depressed, cruise control switch must be adjusted. 1. Loosen hardware (f) . 2. Adjust switch (g) so contacts are closed with the brake disengage...

  • Page 13: Adjustments    3

    Adjustments 3 en-13 3.9 hydro neutral _________________________________________________________ if the mower “creeps” in either direction, the neutral position must be adjusted. The mower may tend to “creep” if the hydraulic oil is cold. Operate mower for 15 minutes before determining if adjustment ...

  • Page 14: 3    Adjustments

    3 adjustments en-14 3.11 steering toe in _________________________________________________________ “toe in” should be adjusted from x + 1/16 in. (1.5 mm). 1. Turn wheels to straight ahead position. 2. Loosen tie rod jam nuts (u) . 3. Adjust tie rod and retighten jam nuts. 4. After adjusting “toe in”...

  • Page 15: Adjustments    3

    Adjustments 3 en-15 3.14 cutting height _________________________________________________________ level the front mower before setting the cutting height for the first time. Do not remove the cutting units from the mower to change cutting height. Cutting height for decks can be adjusted from 1 to 5-...

  • Page 16: 3    Adjustments

    3 adjustments en-16 3.15 leveling front mower _________________________________________________ 1. Before leveling the front deck, the mower tires, and caster wheels must be properly inflated. The cutting height is directly related to the radius of the tire. 2. Set the cutting height of the front mo...

  • Page 17: Adjustments    3

    Adjustments 3 en-17 3.17 torque specification ___________________________________________________ jacobsen uses grade 5 plated bolts as standard unless otherwise noted. For tightening plated bolts use the value given for lubricated. 3.18 specific torque ______________________________________________...

  • Page 18: 4    Maintenance

    4 maintenance en-18 4 maintenance 4.1 general________________________________________________________________ 1. Adjustment and maintenance should always be performed by a qualified technician. If proper adjustments cannot be made, contact an authorized jacobsen dealer. 2. Inspect the equipment on a...

  • Page 19: Maintenance    4

    Maintenance 4 en-19 4.3 sharpening blades _____________________________________________________ 1. Place a wooden block between the blade and mower housing to stop the blade from moving. To remove blade, turn screw holding blade counterclockwise . 2. When dressing or sharpening the blade, do not fol...

  • Page 20: 4    Maintenance

    4 maintenance en-20 4.4 engine _________________________________________________________________ important: a separate engine manual, prepared by the engine manufacturer, is supplied with this mower . Read the engine manual carefully until you are familiar with the operation and maintenance of the e...

  • Page 21: Maintenance    4

    Maintenance 4 en-21 4.6 air filter _______________________________________________________________ do not remove the element for inspection or cleaning. Unnecessary removal of the filter increases the risk of injecting dust and other impurities into the engine. Air cleaner servicing is required when...

  • Page 22: 4    Maintenance

    4 maintenance en-22 4.9 battery ________________________________________________________________ make absolutely certain the ignition switch is off and the key has been removed before servicing the battery. Tighten cables securely to battery terminals and apply a light coat of silicone dielectric gr...

  • Page 23: Maintenance    4

    Maintenance 4 en-23 4.12 hydraulic hoses _______________________________________________________ 1. Always lower implements to ground, disengage all drives, engage parking brake, stop engine, and remove key before inspecting or disconnecting hydraulic lines or hoses. 2. Check visible hoses and tubes...

  • Page 24: 4    Maintenance

    4 maintenance en-24 4.14 hydraulic oil filters __________________________________________________ the hydraulic system is protected by two 10 micron filters. To replace hydraulic oil filter: 1. Remove the old filter. 2. Fill new filter with oil then install new filter. Hand tighten only. 3. Operate ...

  • Page 25: Maintenance    4

    Maintenance 4 en-25 4.18 wheel mounting procedure ____________________________________________ 1. Remove dirt, grease, and oil from stud thread. Do not lubricate threads. 2. Position wheel on hub and inspect to insure full contact between mounting surface of wheel and hub. 3. Finger tighten all hard...

  • Page 26: 4    Maintenance

    4 maintenance en-26 4.21 radiator and oil cooler _______________________________________________ 1. Check coolant level daily. Radiator should be full and recovery bottle should be up to the cold mark. 2. Drain and refill annually. Remove the radiator cap, open the engine block drain and the radiato...

  • Page 27: Maintenance    4

    Maintenance 4 en-27 4.22 storage ________________________________________________________________ general 1. Wash the mower thoroughly and lubricate. Repair and paint damaged or exposed metal. 2. Inspect the mower, tighten all hardware, replace worn or damaged components. 3. Drain and refill radiato...

  • Page 28: 5    Troubleshooting

    5 troubleshooting en-28 5 troubleshooting 5.1 general________________________________________________________________ the troubleshooting chart below lists basic problems that may occur during start-up and operation. For more detailed information regarding the hydraulic and electrical systems contac...

  • Page 29: Warning

    Maintenance & lubrication charts 6 en-29 6 maintenance & lubrication charts 6.1 general ________________________________________________________________ 1. Always clean the grease fitting before and after lubricating. 2. Lubricate with grease that meets or exceeds nlgi grade 2 lb specifications. App...

  • Page 30

    6 maintenance & lubrication charts en-30 6.3 maintenance charts ___________________________________________________ a - add or adjust c - clean i - inspect l- lubricate r - replace ar - as required * indicates initial service for new machines. ** or every two years whichever comes first. *** inspect...

  • Page 31: Notes    7

    Notes 7 en-31 7 notes.

  • Page 32: 8    Parts List

    8 parts list en-32 8 parts list 8.1 how to use the parts catalog _________________________________________ abbreviations n/s - not serviced seperately, can only be obtained by ordering main component or kit. Ar -variable quantity or measurement is required to obtain correct adjustment. Symbols such ...

  • Page 34

    Questo manuale contiene istruzioni sulla messa a punto, manutenzione, localizzazione guasti e la lista delle parti di ricambio per la nuova macchina jacobsen. Conservatelo con l’attrezzatura per futura consultazione durante l’utilizzo. Prima che facciate funzionare la vostra macchina, voi ed ogni op...

  • Page 35

    It-3 indice 1 sicurezza 1.1 sicurezza del funzionamento .............................. 4 1.2 note importanti di sicurezza ................................5 2 dati tecnici 2.1 identificazione del prodotto .................................6 2.2 motore .....................................................

  • Page 36: 1    Sicurezza

    1 sicurezza it-4 1 sicurezza 1.1 sicurezza del funzionamento __________________________________________ 1. La sicurezza dipende dalla preparazione, dal senso di responsabilità e dalla prudenza degli operatori e del personale addetto alla manutenzione. Non permettere mai a minori di usare la macchina...

  • Page 37: Sicurezza    1

    Sicurezza 1 it-5 1.2 note importanti di sicurezza ___________________________________________ questo simbolo di allarme di sicurezza viene utilizzato per indicare pericoli potenziali. Pericolo - indica una situazione imminentemente pericolosa che, se non evitata, provocherÀ la morte o gravi lesioni....

  • Page 38: 2    Dati Tecnici

    2 dati tecnici it-6 2 dati tecnici 2.1 identificazione del prodotto __________________________________________ 69171.............................. R-311t con rops pieghevole. Numero di serie .............. Sul telaio del tosaerba è attaccata una targhetta di identificazione come quella indicata che ...

  • Page 39: Dati Tecnici    2

    Dati tecnici 2 it-7 2.4 apparati di taglio _________________________________________________________________ tipo ................................. Tre piatti di taglio completamente flottanti larghezza: piatto anteriore.......... 1625 mm piatti laterali .............. 1067 mm larghezza di taglio: a...

  • Page 40: 2    Dati Tecnici

    2 dati tecnici it-8 2.7 dichiarazione di conformitÀ ___________________________________________ declaration of conformity ▪ ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ ▪ prohlÁŠenÍ o shod Ě ▪ overensstemmelseserklÆring ▪ conformiteitsverklaring ▪ vastavusdeklaratsioon ▪ vaatimustenmukaisuusvakuutus ▪ declaration de ...

  • Page 41: Dati Tecnici    2

    Dati tecnici 2 it-9 harmonised standards used ▪ Използвани хармонизирани стандарти ▪ použité harmonizované normy ▪ brugte harmoniserede standarder ▪ gebruikte geharmoniseerde standaards ▪ kasutatud ühtlustatud standardid ▪ käytetyt yhdenmukaistetut standardit ▪ normes harmonisées utilisées ▪ angewan...

  • Page 42: 3    Regolazioni

    3 regolazioni it-10 3 regolazioni 3.1 dati generali __________________________________________________________ 1. Le regolazioni e la manutenzione devono essere sempre effettuate da un tecnico qualificato. Se non è possibile effettuare la corretta regolazione, contattare un concessionario jacobsen. ...

  • Page 43: Regolazioni    3

    Regolazioni 3 it-11 3.4 pedale del freno_______________________________________________________ mettere a punto i freni dopo avere sostituito o revisionato il gruppo freni o in caso di eccessiva corsa del pedale. 1. Dopo avere montato le nuove pastiglie dei freni, assestarle guidando il tosaerba a v...

  • Page 44: 3    Regolazioni

    3 regolazioni it-12 3.6 interruttore del regolatore automatico della velocitÀ ____________ se l’interruttore del regolatore automatico della velocità non si disinserisce quando si preme il pedale del freno, occorre regolarlo. 1. Allentare la bulloneria (f) . 2. Regolare l’interruttore (g) quanto bas...

  • Page 45: Regolazioni    3

    Regolazioni 3 it-13 3.9 idraulico folle ________________________________________________________ se il tosaerba slitta in qualsiasi direzione, occorre regolare la posizione in folle. Talvolta il tosaerba tende a slittare se l’olio idraulico è freddo. Azionate il tosaerba per 15 minuti prima di decid...

  • Page 46: 3    Regolazioni

    3 regolazioni it-14 3.11 convergenza dello sterzo ____________________________________________ la convergenza deve essere regolata da x ± 1,5 mm. 1. Girate le ruote direttamente in avanti 2. Allentate i controdadi del tirante (u) . 3. Regolate il tirante e serrate di nuovo i controdadi. 4. In seguit...

  • Page 47: Regolazioni    3

    Regolazioni 3 it-15 3.14 altezza di taglio _______________________________________________________ livellate il tosaerba anteriore prima di regolare l’altezza di taglio per la prima volta. Non togliete gli apparati di taglio dal tosaerba per cambiare l’altezza di taglio. L’altezza di taglio degli ap...

  • Page 48: 3    Regolazioni

    3 regolazioni it-16 3.15 livellamento del tosaerba anteriore_________________________________ 1. Prima di livellare il piatto di taglio anteriore bisogna gonfiare correttamente i pneumatici del tosaerba e le ruote girevoli. L’altezza di taglio è direttamente proporzionale al raggio del pneumatico. 2...

  • Page 49: Regolazioni    3

    Regolazioni 3 it-17 3.17 specifica della coppia _________________________________________________ jacobsen usa bulloni placcati grado 5 di serie, salvo indicazione al contrario. Per il serraggio di bulloni placcati utilizzare il valore riportato per bulloni lubrificati. 3.18 coppia specifica _______...

  • Page 50: 4    Manutenzione

    4 manutenzione it-18 4 manutenzione 4.1 dati generali __________________________________________________________ 1. La regolazione e la manutenzione devono essere effettuate in tutti i casi da un tecnico qualificato. Se non è possibile apportare le corrette modifiche, contattare un concessionario ja...

  • Page 51: Manutenzione    4

    Manutenzione 4 it-19 4.3 affilatura delle lame _________________________________________________ 1. Sistemare un tassello di legno tra la lama e la sede della falciatrice per impedire qualunque movimento della lama. Per togliere la lama, girare in senso antiorario la vite che la trattiene . 2. Nell’...

  • Page 52: 4    Manutenzione

    4 manutenzione it-20 4.4 motore ________________________________________________________________ importante: un manuale separato del motore, preparato dal fabbricante del motore, viene fornito con questo trattorino. Leggere attentamente il manuale del motore per familiarizzarsi con il funzionamento ...

  • Page 53: Manutenzione    4

    Manutenzione 4 it-21 4.6 filtro dell’aria ________________________________________________________ non rimuovere l’elemento per controllarlo o pulirlo. La rimozione non necessaria del filtro aumenta il rischio di iniettare polvere e altre impurezze nel motore. Se la spia della revisione del filtro d...

  • Page 54: 4    Manutenzione

    4 manutenzione it-22 4.9 batteria _______________________________________________________________ accertarsi che l’interruttore d’accensione sia effettivamente “spento” e che la chiave sia stata rimossa prima di effettuare la manutenzione sulla batteria. Serrare bene i cavi ai morsetti della batteri...

  • Page 55: Manutenzione    4

    Manutenzione 4 it-23 4.12 tubi idraulici flessibili _________________________________________________ 1. Prima di esaminare o scollegare le linee o i tubi idraulici flessibili abbassare sempre gli attrezzi a terra, discon- nettere tutti i comandi, innestare il freno di staziona- mento, arrestare il ...

  • Page 56: 4    Manutenzione

    4 manutenzione it-24 4.14 filtri dell’olio idraulico ______________________________________________ l’impianto idraulico è protetto da due filtri da 10 micron. Sostituzione del filtro dell’olio idraulico: 1. Togliete il filtro usato. 2. Riempite di olio il nuovo filtro e montatelo; serratelo soltant...

  • Page 57: Manutenzione    4

    Manutenzione 4 it-25 4.18 procedimento di montaggio delle ruote _______________________________ 1. Rimuovere lo sporco, il grasso e l’olio dalla filettatura del perno prigioniero. Non lubrificare le filettature. 2. Posizionare la ruota sul mozzo e controllarla per verificare il contatto totale fra l...

  • Page 58: 4    Manutenzione

    4 manutenzione it-26 4.21 radiatore dell’acqua e dell’olio______________________________________ 1. Controllate ogni giorno il livello del refrigerante. Il radiatore deve essere colmo, e il vaso di caricamento deve essere colmo fino al segno freddo . 2. Ogni anno spurgate e riempite di nuovo. Toglie...

  • Page 59: Manutenzione    4

    Manutenzione 4 it-27 4.22 conservazione _________________________________________________________ dati generali 1. Lavare bene e lubrificare il trattorino. Riparare e verniciare il metallo danneggiato o esposto. 2. Esaminare il trattorino, serrare tutti i componenti, sostituire i componenti logori o...

  • Page 60

    5 soluzione dei problemi it-28 5 soluzione dei problemi 5.1 dati generali __________________________________________________________ la tabella della soluzione dei problemi sotto elenca i problemi fondamentali che possono verificarsi durante l’avviamento e il funzionamento. Richiedere informazioni p...

  • Page 61: Avvertenza

    Tabelle della manutenzione e lubrificazione 6 it-29 6 tabelle della manutenzione e lubrificazione 6.1 dati generali ___________________________________________________________ 1. Pulite sempre i raccordi di ingrassaggio prima e dopo la lubrificazione. 2. Lubrificate con grasso che soddisfi o superi ...

  • Page 62

    6 tabelle della manutenzione e lubrificazione it-30 6.3 tabella della manutenzione___________________________________________ a - aggiungere o regolare c - pulire i - ispezionare l- lubrificare r - sostituire ar - secondo necessità * indica la manutenzione iniziale per le macchine nuove. ** od ogni ...

  • Page 63: Note    7

    Note 7 it-31 7 note.

  • Page 64: 8    Catalogo Ricambi

    8 catalogo ricambi it-32 8 catalogo ricambi 8.1 come usare il catalogo ricambi _______________________________________ abbreviazioni n/s - non fornito a parte, può essere ottenuto soltanto ordinando il componente principale o l’intero corredo. Ar - quantità variabile ovvero è necessaria la misurazio...

  • Page 65: Parts List    8

    Parts list 8 en-33 8.3 table of contents______________________________________________________ 1.1......... decals ................................................................  34 2.1......... hood and front cowling ..................................  36 3.1......... hood...............

  • Page 66: 105

    34 push to latch wing arms. Pull to release this radiator contains anti-freeze protected to -26 f (-32 c) mix equal parts of clean water and a premium quality ethylene glycol based anti-freeze to maintain the boil over, rust and corrosion protection. Drain and discard coolant yearly. Read manual for...

  • Page 67: R-311T

    35 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4199160 1 decal, r-311 weight located on right frame rail 2 4117468 1 decal, 105 db noise located on right frame rail 3 4194260 2 decal, rops deployment located on rops folding section 4 ref 1 serial plat...

  • Page 68: R-311T

    36 1 2 2 3 3 4 5 5 5 5 6 6 7 7 7 7 8 10 10 10 10 10 10 11 12 13 14 15 16 16 17 17 18 19 19 20 20 21 22 22 23 23 24 24 25 25 26 26 27 28 33 / 34 37 / 38 28 29 29 9 31 32 32 29 12 9 28 29 30 35 35 39 36 36 r-311t 2.1 hood and front cowling serial no. All.

  • Page 69: R-311T

    37 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4211440 1 hood, r-311 see 3.1 2 4212423 2 latch, overcenter 3 ns 2 • keeper 4 400408 2 screw, 1/2-13 x 1-1/2” hex head 5 450152 8 screw, m5-0.8 x 20 mm hex head 6 403912 8 screw, #10-24 x 5/8” truss head ...

  • Page 70: R-311T

    38 r-311t 1 2 2 3 3 4 4 5 5 6 6 7 / 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 ® r-311t 3.1 hood serial no. All.

  • Page 71: R-311T

    39 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4211440 1 hood assembly 2 340795 2 • handle, hood 3 402230 4 • screw, 1/4-20 x 1” slotted 4 453023 4 • flat washer, 1/4 5 446130 4 • lockwasher, 1/4 heavy 6 443102 4 • nut, 1/4-20 hex 7 4187680 1 • decal,...

  • Page 72: R-311T

    40 1 2 3 4 5 5 34 5 5 6 6 7 8 9 10 11 12 13 13 13 14 14 14 15 16 17 18 19 20 22 13 16 23 21 24 29 26 25 36 31 21 23 24 21 25 24 32 27 28 23 23 32 21 24 30 33 24 21 23 25 35 r-311t 4.1 floorboard platform serial no. All.

  • Page 73: R-311T

    41 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4185961 1 right side fender 2 4208122 1 left side fender 3 4185981 1 pad, right side step 4 4185980 1 pad, left side step 5 441614 11 carriage bolt, 5/16-18 x 1” 6 445781 7 nut, 5/16-18 whizlock flange 7 ...

  • Page 74: R-311T

    42 1 2 3 4 5 6 7 8 9 10 11 12 13 30 14 29 15 15 15 15 16 17 18 18 18 18 19 19 19 19 20 20 20 20 21 21 22 23 23 24 25 26 27 27 28 r-311t 5.1 utility box serial no. All.

  • Page 75: R-311T

    43 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4208120 1 utility box 2 4208121 1 • plate, support 3 400188 4 • screw, 5/16-18 x 1” hex head 4 453009 4 • flat washer, 5/16 5 473211 8 • washer, neoprene 6 446134 4 • lockwasher, 5/16 7 443106 4 • nut, 5/...

  • Page 76: R-311T

    44 a 1 8 9 9 10 19 20 21 7 7 8 7 8 14 16 18 12 17 15 13 13 15 14 22 23 13 15 11 10 9 8 8 7 a 2 3 4 5 5 6 6 6 r-311t 6.1 console support serial no. All.

  • Page 77: R-311T

    45 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4168044 1 support, console 2 4227180 1 console wall 3 ref 1 seat and seat base see 7.1 4 4185864 1 rod, seat pivot 5 821164 2 hair pin, 1/16 x 1-1/4 x 1/4” 6 452007 4 flat washer, 3/8 7 400264 7 screw, 3/...

  • Page 78: R-311T

    46 1 1 1 1 1 1 1 1 2 2 2 2 23 23 23 23 3 3 3 3 4 22 22 22 22 4 5 5 5 5 5 5 5 6 6 6 6 7 8 9 10 10 11 11 12 13 14 15 16 17 18 19 20 21 4181865 r-311t 7.1 seat and seat base serial no. All.

  • Page 79: R-311T

    47 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 450453 4 locknut, m8-1.25 center 2 452388 4 screw, m8-1.25 x 20 mm hex head 3 4185860 4 seat riser 4 400186 4 screw, 5/16-18 x 7/8” hex head 5 4198581 3 spacer 6 445795 4 nut, 5/16-18 spiralock flange 7 4...

  • Page 80: R-311T

    48 j-t xxxxxx -xx j-t xx xx xx- xx 10 10 10 30 30 10 x x w y y z z 9 10 8 part of 8 11 37 38 part of 11 control panel decal 12 13 15 14 w 19 part of 19 20 21 23 22 36 part of 34 34 35 33 27 25 42 43 44 40 16 17 18 18 1 7 39 6 5 31 4 2 3 29 30 28 32 26 24 41 j-t xxxxxx -x x j-t x x x x x x- x x 10 10...

  • Page 81: R-311T

    49 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4193340 1 control panel 4170760 1 • decal, control panel 2 338601 1 circuit breaker, 10 amp reference cb1, see 62.1 3 338601 1 circuit breaker, 10 amp reference cb2, see 62.1 4 338601 1 circuit breaker, 1...

  • Page 82: R-311T

    50 > change from previous revision 6 6 3 12 4 6 2 5 1 13 12 7 7 7 8 9 10 11 r-311t 9.1 lift valve serial no. All item part no. Qty. Description serial numbers/notes 1 1001802 1 lift valve see 54.1 2 366150 1 weather strip 3 132473 1 right wing lift lever 4 132472 1 center lift lever 5 132471 1 left ...

  • Page 83: R-311T

    51 > change from previous revision 11 9 8 7 7 12 1 2 4 5 13 10 3 6 r-311t item part no. Qty. Description serial numbers/notes 1 4172944 1 throttle handle 2 326731 1 knob, throttle 3 4177920 1 cable, throttle see 22.1 for engine connection 4 445800 1 palnut, 3/16 5 440116 1 carriage bolt, 3/8-16 x 7/...

  • Page 84: R-311T

    52 1 2 3 4 5 6 7 8 9 10 11 11 12 13 14 25 15 16 17 18 19 20 24 21 22 23 23 23 22 23 26 27 28 29 30 31 r-311t 11.1 traction pedal linkage serial no. All.

  • Page 85: R-311T

    53 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4116048 1 pedal, hydro 2 3007230 1 stop, mow speed 3 3003474 1 grip, reverse pedal 4 3003475 1 grip, forward pedal 5 400188 1 screw, 5/16-18 x 1” hex head 6 3002695 1 flat washer, 5/16 7 444718 1 locknut,...

  • Page 86: R-311T

    54 12 15 14 10 20 11 38 37 8 40 30 2 4 6 1 7 36 7 5 31 32 31 32 8 19 8 13 13 34 16 15 5 8 27 12 9 12 21 23 20 24 21 26 39 12 12 22 35 8 3 18 19 17 25 28 29 19 19 7 9 8 13 33 r-311t 12.1 traction linkage serial no. All.

  • Page 87: R-311T

    55 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 2500257 1 tube, traction return 2 3007095 1 stop, rear pivot 3 3000593 1 spacer, traction control 4 358795 1 screw, 3/8-24 x 5-1/2” special 5 358794 4 washer 6 364970 1 spring, compression 7 443812 4 nut,...

  • Page 88: R-311T

    56 1 2 2 3 4 4 5 5 6 7 8 8 9 10 11 12 13 14 33 15 16 16 17 17 18 18 19 20 36 21 22 22 23 23 24 32 32 24 25 25 25 39 34 26 26 26 26 27 38 37 27 28 29 29 29 30 31 31 35 r-311t 13.1 brake pedal serial no. All.

  • Page 89: R-311T

    57 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4183261 1 brake pedal 2 352726 2 • bushing 3 3006327 1 shaft, brake pedal 4 4100460 2 arm, brake 5 403770 2 screw, 5/16-18 x 3/4” hex flange 6 4183260 1 lever, parking brake 7 400190 1 screw, 5/16-18 x 1-...

  • Page 90: R-311T

    58 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 12 12 12 8 9 10 10 11 11 11 11 11 11 11 11 11 17 17 12 12 13 14 15 22 23 24 25 26 27 28 28 1 2 3 3 5 5 6 6 7 7 16 16 17 18 19 20 21 r-311t 14.1 brake caliper serial no. All.

  • Page 91: R-311T

    59 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 446142 2 lockwasher, 3/8 heavy 2 443110 2 nut, 3/8-16 hex 3 4215701 2 plate, caliper mounting 4 400411 4 screw, 1/2-13 x 1-3/4” hex head grade 8 5 4212780 28 hardened washer, 1/2” 6 446154 4 lockwasher, 1...

  • Page 92: R-311T

    60 1 2 2 3 3 4 4 5 5 6 6 7 7 12 12 14 14 15 15 17 17 16 9 / 10 11 13 17 18 19 19 29 20 21 21 22 22 22 22 22 22 22 22 22 23 23 23 23 23 24 24 24 24 24 25 8 8 25 26 26 27 28 28 32 33 34 35 36 31 22 23 24 30 r-311t 15.1 frame and front axle serial no. All.

  • Page 93: R-311T

    61 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4223140 1 front axle 2 4207700 2 key 3 4213320 2 hub, wheel 4 4212741 2 disc, brake 5 442423 16 screw, 1/4-20 x 5/8” torx flat head 6 557624 2 nut 7 460093 2 cotter pin, 1/8 x 2-1/2” 8 453030 2 flat washe...

  • Page 94: R-311T

    62 b c a b c a 1 2 2 3 3 3 3 4 4 5 5 6 6 6 7 7 7 7 7 8 8 9 9 10 10 11 12 13 13 14 14 15 15 15 15 15 15 16 17 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 30 30 31 32 32 33 33 34 34 34 34 34 34 35 36 36 37 37 38 38 39 40 41 r-311t 16.1 steering axle serial no. All.

  • Page 95: R-311T

    63 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 2720313 1 steering axle 2 2720298 2 • bushing, axle pivot 3 3010489 4 • bushing, mount pivot 4 4121827 2 screw, 1/2-20 x 1-3/4” socket head 5 443820 2 nut, 1/2-20 hex jam 6 471221 3 grease fitting, 90° 7 ...

  • Page 96: R-311T

    64 a a 1 2 2 3 43 3 4 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 23 24 25 26 27 27 28 28 29 30 31 32 33 34 35 36 37 38 39 40 40 41 42 ® 4192000 r-311t 17.1 steering tower serial no. All.

  • Page 97: R-311T

    65 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4185325 1 steering tower 2 4211760 1 bracket, steering pump 3 4205980 2 shoulder bolt, 3/4-10 4 400258 2 screw, 3/8-16 x 3/4” hex head 5 446142 2 lockwasher, 3/8-16 heavy 6 444849 2 locknut, 3/4-10 center...

  • Page 98: R-311T

    66 5 5 6 6 12 12 11 13 13 13 14 14 16 18 19 19 20 20 21 22 23 24 24 27 28 29 35 4 17 15 25 25 26 26 34 34 32 32 4199140 4205183 1 2 3 7 7 8 9 10 30 31 33 37 36 38 39 39 40 r-311t 18.1 air cleaner serial no. All.

  • Page 99: R-311T

    67 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4227441 1 air cleaner includes decal 4133818 1 • cover, air cleaner 4133820 1 • filter, primary air cleaner 4133821 1 • filter, safety air cleaner 5003373 1 • vactuator valve 2 4128084 1 clamp, air cleane...

  • Page 100: R-311T

    68 8 8 6 7 2 2 1 20 27 26 9 9 27 25 27 24 23 28 29 30 31 32 33 21 18 19 13 22 22 15 16 16 17 14 this radiator contains anti-freeze protected to -26 f (-32 c) mix equal parts of clean water and a premium quality ethylene glycol based anti-freeze to maintain the boil over, rust and corrosion protectio...

  • Page 101: R-311T

    69 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4227440 1 radiator shroud 2 4164381 1 • decal, danger 3 400264 6 screw, 3/8-16 x 1-1/4” hex head 4 452008 16 flat washer, 5/16 5 446142 12 lockwasher, 3/8 heavy 6 4227420 1 radiator includes decals 7 5508...

  • Page 102: R-311T

    70 2 3 5 6 7 7 29 28 8 9 10 12 11 13 14 14 16 18 19 20 21 4 17 15 1 22 23 24 25 26 27 r-311t 20.1 engine serial no. All.

  • Page 103: R-311T

    71 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4196741 1 engine, kubota v2403-m-t-e3b for complete listing of engine service parts, see engine parts manual 4113986 1 • engine oil filter 557619 1 • cartridge, fuel filter 5000938 1 • alternator referenc...

  • Page 104: R-311T

    72 20 20 3 5 5 5 5 6 6 6 14 14 6 7 7 2 2 8 9 10 12 12 11 11 13 13 16 16 18 18 4 17 19 15 15 1 1 r-311t 21.1 engine mounts serial no. All.

  • Page 105: R-311T

    73 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4207484 2 mount, rear engine 2 358794 4 washer 3 4207482 1 mount, left front engine 4 4207483 1 mount, right front engine 5 365979 7 screw, m12-1.25 x 25 mm metric grade 8.8 6 446154 7 lockwasher, 1/2 hea...

  • Page 106: R-311T

    74 > change from previous revision 1 2 3 4 r-311t 22.1 engine fuel control serial no. All item part no. Qty. Description serial numbers/notes 1 4177920 1 throttle cable see 10.1 2 400108 1 screw, 1/4-20 x 3/4” hex head 3 453023 1 flat washer, 1/4 4 444708 1 locknut, 1/4-20 center.

  • Page 107: R-311T

    75 > change from previous revision 7 9 5 12 6 7 1 10 8 11 7 4 13 3 2 r-311t item part no. Qty. Description serial numbers/notes 1 4196900 1 muffler 2 4196780 1 exhaust pipe 3 553020 1 gasket, exhaust included with engine 4 363586 4 screw, m8-1.25 x 20 mm hex head 5 1000050 2 muffler bracket 6 400188...

  • Page 108: R-311T

    76 im p o rt an t d ie se l f ue l o nl y 21 17 4 3 20 18 19 10 5 5 14 26 27 6 11 7 16 16 21 12 21 2 1 22 21 21 23 21 28 5 21 5 9 8 13 part of hood to engine return to engine 25 24 21 15 21 r-311t 24.1 fuel tank serial no. All.

  • Page 109: R-311T

    77 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 163987 1 fuel cap 2 163986 1 fuel sender reference u8, see 62.1 3 148081 1 • gasket 4 403910 5 screw, #10-24 x 1/2” truss head 5 361117 4 bushing, fuel 6 452006 2 flat washer, 5/16 7 400188 2 screw, 5/16-...

  • Page 110: R-311T

    78 17 5 19 20 21 24 18 14 1 13 15 29 14 16 1 11 13 14 13 27 25 30 22 23 26 20 28 2 6 5 7 5 8 8 9 8 3 10 6 5 10 9 5 6 4 r-311t 25.1 hydraulic tank support serial no. All.

  • Page 111: R-311T

    79 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4175121 2 support, rear tank 2 132432 1 support, left side tank 3 132431 1 support, right side tank 4 400286 2 screw, 3/8-16 x 2-3/4” 5 446142 12 lockwasher, 3/8 heavy 6 445806 6 nut, 3/8-16 hex nylock 7 ...

  • Page 112: R-311T

    80 11 12 10 5 6 7 8 9 1 2 3 18 4 15 10 16 13 14 17 r-311t 26.1 hydraulic tank serial no. All.

  • Page 113: R-311T

    81 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4227460 1 hydraulic oil tank includes decals 2 4211081 1 valve, oil drain 3 3002397 1 plug, magnetic 4 367551 1 switch, hydraulic oil temperature reference sw13, see 62.1 h 5 163915 1 breather, tank impor...

  • Page 114: R-311T

    82 33 17 15 24 8 37 6 14 29 32 14 15 16 28 15 19 18 19 39 18 16 36 5 14 15 35 31 14 30 9 18 19 7 8 11 10 4 14 13 21 12 20 17 34 3 2 1 17 24 8 16 15 14 25 22 23 38 23 27 24 8 26 st p ld t sd dl 4wd r-311t 27.1 pumps and control valve serial no. All.

  • Page 115: R-311T

    83 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4153880 1 pump, traction see 57.1 2 557447 1 • o-ring 3 338938 1 • pump coupler 4 4138342 1 pump, 4 section gear 4138341 1 • seal kit 5 557417 1 • pump adapter 6 557418 1 • gasket 7 400412 2 screw, 1/2-13...

  • Page 116: R-311T

    84 7 17 15 6 1 5 18 16 8 1 14 10 9 14 11 12 13 2 3 4 2 14 14 19 19 r-311t 28.1 traction hydraulics serial no. All.

  • Page 117: R-311T

    85 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 132417 2 hose, traction pump to axle motor 2 340269 2 adapter, tee 3 340074 2 adapter, 90° 4 4153880 1 traction pump see 27.1 for component mounting 5 4170780 1 front axle motor see 27.1 for component mou...

  • Page 118: R-311T

    86 > change from previous revision 2 11 8 8 8 right wing deck valve left wing deck valve 5 2 6 gear pump 2 10 5 2 10 13 12 4 9 front deck valve 2 3 2 1 7 8 9 10 r-311t 29.1 gear pump hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 338946 1 adapter, 90° beaded 339903 1...

  • Page 119: R-311T

    87 > change from previous revision 7 control valve 8 1 1 3 3 4 3 5 6 gear pump 2 1 2 2 st p ld t sd dl 4wd 4wd valve 7 r-311t item part no. Qty. Description serial numbers/notes 1 340065 3 adapter, 90° 2 364945 3 adapter, diagnostic port 3 363030 3 dust cover 4 339989 1 adapter, straight control val...

  • Page 120: R-311T

    88 > change from previous revision 5 1 control valve to control valve to steering cylinder steering cylinder steering valve st p ld t sd dl 4wd 2 3 4 r l p t r-311t 31.1 steering hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 339984 1 adapter, straight control valve ...

  • Page 121: R-311T

    89 > change from previous revision in out b d f lift valve 1 right front cylinder control valve 11 3 back pressure valve 1 12 right wing cylinder 8 9 left front cylinder 13 10 left wing cylinder 6 11 4 7 5 2 st p ld t sd dl 4wd r-311t item part no. Qty. Description serial numbers/notes 1 340066 2 ad...

  • Page 122: R-311T

    90 > change from previous revision front left cylinder 11 10 front right cylinder 12 5 6 7 6 5 2 1 4 3 left wing cylinder hydraulic tank right wing cylinder 1 1 9 8 r-311t 33.1 lift return hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 340061 3 adapter, 90° 2 1003595...

  • Page 123: R-311T

    91 > change from previous revision 5 hydraulic tank 11 12 4 6 13 8 4 9 10 1 3 2 7 1 r-311t item part no. Qty. Description serial numbers/notes 1 340055 2 adapter, 90° 2 1000700 1 hose, left wheel motor drain see 28.1 3 1000700 1 hose, right wheel motor drain see 28.1 4 359186 3 adapter, tee 5 100313...

  • Page 124: R-311T

    92 > change from previous revision 11 steering valve 8 traction pump 5 4wd valve contol valve 2 4 6 3 1 9 10 7 charge filter to charge filter 9 10 st p ld t sd dl 4wd r l p t r-311t 35.1 charge hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 132540 1 hose, control val...

  • Page 125: R-311T

    93 > change from previous revision 4 3 2 1 left wing deck valve front deck valve hydraulic tank 7 6 10 5 9 10 11 8 r-311t item part no. Qty. Description serial numbers/notes 1 340070 1 adapter, 90° 2 4192440 1 hose, front to left wing deck valve 3 2720559 1 adapter, tee 4 4199222 1 hose, left valve ...

  • Page 126: R-311T

    94 > change from previous revision r-311t 37.1 return hydraulics serial no. All serial no. All item part no. Qty. Description serial numbers/notes 1 351124 2 adapter, straight 2 358949 1 adapter, 90° 3 357613 1 adapter, straight 4 4188620 1 hose, backpressure valve to tank 5 351108 1 adapter, straig...

  • Page 127: R-311T

    95 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 1003584 1 hose, motor to front valve front deck valve port b 4192362 1 front deck hose assembly 2 1003584 1 • hose, front valve to motor front deck valve port a 3 4192360 1 • hose, front deck to bulkhead ...

  • Page 128: R-311T

    96 > change from previous revision 4 6 2 8 1 outside motor 3 2 inside motor left wing deck valve 2 11 13 12 10 9 5 1 7 r-311t 39.1 left wing deck hydraulics serial no. All serial no. All item part no. Qty. Description serial numbers/notes 1 340070 2 adapter, 90° 2 339989 4 adapter, straight 3 366445...

  • Page 129: R-311T

    97 > change from previous revision 10 11 12 13 inside motor 4 1 2 5 2 3 8 outside motor 7 9 1 right wing deck valve 2 6 r-311t item part no. Qty. Description serial numbers/notes 1 340070 2 adapter, 90° 2 339989 4 adapter, straight 3 362288 1 adapter, 90° 4 366445 1 adapter, tee 1003133 1 right wing...

  • Page 130: R-311T

    98 front axle motor hoses 10 12 14 15 13 10 18 20 21 steering cylinder hoses 19 13 13 10 17 4 16 5 5 6 7 7 part of floorboard 8 9 11 4 1 2 3 5 r-311t 41.1 hydraulic clamping serial no. All.

  • Page 131: R-311T

    99 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 366607 2 spacer, hose 2 359860 2 clamp, 2 hose 3 400204 2 screw, 5/16-18 x 3-1/2” 4 446136 2 lockwasher, 5/16 heavy 5 443106 4 nut, 5/16-18 hex 6 3008793 2 clamp, hose front deck motor hoses 7 3008792 2 s...

  • Page 132: R-311T

    100 k2 k7 k3 k6 k5 k9 k8 k21 k20 k18 k19 k17 9 9 5 5 6 6 part of right wing limit switch harness part of console harness 8 13 14 17 7 12 2 20 20 20 20 20 14 14 4 4 4 4 16 28 11 10 10 13 part of left wing limit switch harness relay identification 1 18 18 to starter post glow plug solenoid wiring to g...

  • Page 133: R-311T

    101 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4210661 1 wire, solenoid to glow plug 2 4210660 1 wire, circuit breaker to solenoid 3 4210662 2 wire, starter to circuit breaker 4 443102 6 nut, 1/4-20 hex 5 4193880 6 relay spdt reference k5, k17, k18, ...

  • Page 134: R-311T

    102 9 7 5 6 15 12 12 11 8 12 14 10 2 14 14 14 13 14 1 4 3 engine harness 16 tractor harness r-311t 43.1 electrical routing serial no. All.

  • Page 135: R-311T

    103 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4167640 3 cable tie, fir tree 2 4211620 1 positive remote terminal cable remote terminal to starter. See 4.1 for terminal 3 365980 1 screw, m12-1.25 x 20 mm 4 446154 1 lockwasher, 1/2 heavy 5 446130 1 lo...

  • Page 136: R-311T

    104 circuit break ers hour meter volt meter fuel gauge ta chometer switches rela ys cab connector p anel lights hor n/t est switch diodes ignition switch te mper ature gauge glo w plug switch hor n ground ground fuel sender p ar king br ak e seat switch control va lv e re ve rse switch headlights br...

  • Page 137: R-311T

    105 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4218120 1 wire harness, console 554492 2 • lockwasher, size 24 554493 2 • panel nut, size 24 555845 10 • light bulb 555846 10 • diode 555847 1 • light strip 2 4211640 1 wire harness, engine 3 4201161 1 w...

  • Page 138: R-311T

    106 26 1 3 13 12 13 14 14 23 24 16 17 18 11 4 14 19 27 2 10 2 14 22 21 5 5 9 25 4 6 7 8 8 7 6 30 31 15 20 28 29 7 32 r-311t 45.1 front lift arms serial no. All.

  • Page 139: R-311T

    107 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 2720206 1 right front lift arm 2 342033 2 • bushing 3 2720207 1 left front lift arm 4 342033 2 • bushing 5 4184641 2 shaft, lift arm pivot 6 346091 4 pin, retaining 7 446136 5 lockwasher, 5/16 heavy 8 40...

  • Page 140: R-311T

    108 23 7 24 31 9 2 / 4 29 9 32 14 11 28 27 27 2 / 4 38 10 14 13 12 5 1 / 3 16 6 30 37 18 15 17 33 34 16 19 20 20 35 21 36 27 22 31 7 8 25 26 8 7 r-311t 46.1 wing lift arms right wing shown serial no. All.

  • Page 141: R-311T

    109 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4222365 1 right wing arm 2 2720298 2 • bushing 3 4222366 1 left wing arm (not shown) 4 2720298 2 • bushing 5 2248004 2 shaft, pivot arm 6 64251-001 4 flat washer, m5 7 446136 5 lockwasher, 5/16 heavy 8 4...

  • Page 142: R-311T

    110 10 3 5 27 13 33 5 4 3 4 15 18 / 19 32 8 9 7 11 14 16 17 22 20 21 2 1 29 30 23 28 24 12 25 31 4 26 5 5 3 4 3 6 6 23 13 33 32 r-311t 47.1 wing deck latch serial no. All.

  • Page 143: R-311T

    111 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 446136 2 lockwasher, 5/16 heavy 2 443106 2 nut, 5/16-18 hex 3 453011 12 flat washer, 3/8 4 446142 12 lockwasher, 3/8 heavy 5 445806 14 nut, 3/8-16 hex 6 400272 4 screw, 3/8-16 x 2-1/4” hex head 7 132601 ...

  • Page 144: R-311T

    112 25 23 1 16 17 21 11 19 12 13 10 18 4 24 20 3 5 6 2 1 21 7 15 8 9 14 8 22 r-311t 48.1 deck mounting serial no. All.

  • Page 145: R-311T

    113 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 64173-02 6 pin, snap ring 2 3000439 2 clevis pin, 1/2 x 3-3/4” 3 3000487 1 clevis pin, 5/8 x 3” 4 346913 2 spacer 5 460050 2 cotter pin, 3/16 x 1-1/4” 6 3006300 1 clevis pin, 5/8 x 3-5/16” 7 362464 12 wh...

  • Page 146: No Step

    114 no step 1.0 2.0 3.0 4.0 5.0 1.0 3.0 5.0 1.5 2.5 3.5 4.5 2.5 4.5 5.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 a b "x" "x" 0 1 2 3 4 0 1 2 3 4 a a a a a b b b b b 3 2 4 4 38 13 13 13 39 39 39 13 39 40 36 2 16 15 17 5 5 / 7 2 16 4 2 15 3 8 8 / 10 33 15 16 34 36 37 38 35 41 42 14 13 12 9 16 15 11 10 ...

  • Page 147: R-311T

    115 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4212580 1 front deck 2 4164381 3 • decal, blade contact danger 3 3002676 1 • decal, cutting height 4 366609 2 • decal, no step 5 2721180 2 motor, deck counter-clockwise rotation 6 557523 1 • key 7 418658...

  • Page 148: R-311T

    116 1.0 2.0 3.0 4.0 5.0 1.0 3.0 5.0 1.5 2.5 3.5 4.5 2.5 4.5 5.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 a b "x" "x" 0 1 2 3 4 0 1 2 3 4 a a a a a b b b b b 4 3 9 27 26 4 16 15 11 10 14 13 12 6 7 24 15 16 16 15 11 1 / 2 33 34 17 25 13 12 23 18 3 14 19 20 22 21 40 15 17 41 38 13 39 40 37 31 32 left wi...

  • Page 149: R-311T

    117 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4212600 1 left wing deck includes items 3 and 4 2 4212601 1 right wing deck (not shown) 3 4164381 2 • decal, blade contact danger 4 3002676 1 • decal, cutting height 5 2721180 2 motor, ccw rotation deck ...

  • Page 150: R-311T

    118 9 1 2 / 17 4 5 8 9 6 7 8 7 6 3 5 11 12 2 / 17 2 / 17 12 11 11 10 12 2 / 17 12 11 3 4 16 14 15 13 15 15 r-311t 51.1 caster wheels serial no. All.

  • Page 151: R-311T

    119 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 131717 8 yoke, caster wheel spindle 2 453022 ar flat washer, 3/4 x 1/8 thick 3 3003207 10 shaft, caster wheel 4 460056 10 cotter pin, 3/16 x 2” 5 403578 10 screw, #10-24 x 1” hex head 6 446118 10 lockwas...

  • Page 152: R-311T

    120 > change from previous revision 5 4 6 4 5 3 5 6 2 1 4 r-311t 52.1 deck bumper serial no. All item part no. Qty. Description serial numbers/notes 1 3003427 1 bracket, deck bumper 2 400262 2 screw, 3/8-16 x 1” hex head 3 453011 2 flat washer, 3/8 4 446142 4 lockwasher, 3/8 heavy 5 445806 4 nut, 3/...

  • Page 153: R-311T

    121 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 5002911 1 relief valve 5003579 1 • seal kit 2 5002912 1 relief valve 5003554 1 • seal kit 3 3010199 1 plug, sae #6 339897 1 • o-ring 4 5002913 1 solenoid valve 5003579 1 • seal kit 5 4134530 1 coil, 12 v...

  • Page 154: R-311T

    122 21 17 26 18 19 14 20 8 9 11 12 22 13 14 7 5 4 3 2 10 16 15 23 24 25 1 6 7 r-311t 54.1 lift valve part number 1001802 serial no. All.

  • Page 155: R-311T

    123 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 558005 1 plug 2 500745 3 plug 3 4113978 3 spring l 4 n/s 3 poppet 5 500746 3 seat 6 5001599 1 plunger 7 5001603 2 plunger 8 558004 3 cap 9 558007 3 retaining ring 10 n/s 1 seat 11 558011 3 spacer 12 5001...

  • Page 156: R-311T

    124 > change from previous revision p ld st f cd sw l sd dl 4wd t viewed from top viewed from rear viewed from right viewed from front viewed from left 5 4 6 1 2 3 7 r-311t 55.1 control valve part number 4174300 serial no. All item part no. Qty. Description serial numbers/notes 1 5003510 1 relief va...

  • Page 157: R-311T

    125 > change from previous revision l1 l2 r1 r2 4wd a b c ad bd viewed from right viewed from left viewed from top viewed from bottom 3, 5 2 4 1 r-311t item part no. Qty. Description serial numbers/notes 1 556897 1 spool valve 5003581 1 • seal kit 2 558038 1 check valve 5003581 1 • seal kit 3 556847...

  • Page 158: R-311T

    126 2 0 - x x r - 0 6 3 0 7 b j 1 3 1 0 8 9 a 1 2 3 3 4 4 5 5 6 7 8 9 10 10 11 12 13 13 14 14 15 16 16 17 18 19 20 21 21 22 23 24 25 26 28 29 30 31 32 32 34 35 36 r-311t 57.1 traction pump part number 4153880 serial no. All.

  • Page 159: R-311T

    127 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 557454 2 dowel pin l 2 n/s 1 retaining ring l 3 n/s 2 retaining ring 4 4162501 6 screw, cap 5 557444 2 plug 6 557442 1 rotating kit 7 4162502 1 plate, control arm cover 8 4162503 1 • seal, control arm sh...

  • Page 160: R-311T

    128 > change from previous revision 4 3 2 2 10 11 2 5 9 6 1 7 8 r-311t 58.1 rear wheel motor part number 4178560 serial no. All serial no. All item part no. Qty. Description serial numbers/notes l 1 n/s 1 seal exclusion l 2 n/s 4 seal, 3” i.D. T 3 n/s 1 back-up ring t 4 n/s 1 shaft seal 5 5003384 1 ...

  • Page 161: R-311T

    129 > change from previous revision 1 2 3 4 5 5 6 6 7 7 7 7 8 8 8 8 9 9 10 10 11 11 12 12 13 13 13 13 14 14 15 15 15 15 15 15 16 16 16 16 16 16 17 17 17 17 17 17 r-311t item part no. Qty. Description serial numbers/notes 1 4179004 1 rops 2 n/s 1 • upper rops 3 n/s 1 • right lower rops 4 n/s 1 • left...

  • Page 162: R-311T

    130 1 2 3 4 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 r-311t 60.1 seat part number 4185878 serial no. All.

  • Page 163: R-311T

    131 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4200240 1 backrest cushion 2 4200241 1 seat cushion 3 4173562 1 lumbar handle kit 4 4173563 1 wear parts kit, backrest attatchment 5 4200244 1 cover, left side 6 4200245 1 cover, right side 7 4173566 1 o...

  • Page 164: R-311T

    132 1 2 3 4 4 4 4 4 5 6 7 8 9 10 11 12 13 14 15 16 17 17 18 18 19 19 20 21 22 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 31 32 33 31 r-311t 61.1 front axle part number 4163987 serial no. All item shim thickness 0.010 0.011 0.012 0.013 0.014 0.015 0.016 0.017 0.018 10 4213621-1 4213621-2 4213621-3 ...

  • Page 165: R-311T

    133 > change from previous revision r-311t item part no. Qty. Description serial numbers/notes 1 4201300 1 case assembly, differential (t/l) 2 4201320 1 gear and pinion assembly, hypoid 3 4201520 10 screw, gear drive 4 4220820 1 carrier sub assembly includes bearing caps and screws 5 4201580-1 ar sh...

  • Page 166: R-311T

    134 m1 b1 u11 b s cb7 cb6 cb4 cb3 cb1 cb8 cb2 cb5 30 85 86 87 k4 sw4 k3 k2 bk bk bk gn/wh gn/wh og/bk bk bk rd/bn rd/wh rd/wh bn ye wh wh/bn pu/ye pu/wh tn tn gn/wh gn/wh gn/wh gn/wh gn/wh pk/bu pk/bu pu/ye rd rd pk/bu pk/bu og/bu rd rd wh/rd rd wh/rd rd rd rd rd rd rd rd rd rd rd rd bn bn rd/wh rd/...

  • Page 167: R-311T

    135 30 85 86 87 87a pu/wh gn/wh gn gn/wh bn/rd bn/rd bn/rd pk/bu pk/bu ye ye sw5 sw18 b i x y s a off - none on - b+i+a; x+y start - b+i+s sw1 bk tn/rd og/bu og/bu og/bu tn/rd ye wh wh gy gy tn/rd l11 bk bk bk bk lb lg l10 l12 l13 og og og og og og og og og og og og og og l3 l4 l1 l5 l6 l7 l8 l9 1-l...

  • Page 168: R-311T

    136 r-311t item reference illustration part number description serial numbers/notes b1 see 4.1 n/s battery cb1 see 8.1 338601 10 amp circuit breaker (interlock) cb2 see 8.1 338601 10 amp circuit breaker (instruments) cb3 see 8.1 338601 10 amp circuit breaker (cruise, 4wd) cb4 see 8.1 338558 30 amp c...

  • Page 169: R-311T

    137 r-311t l8 not shown 555845 water temp warning light l9 not shown 555845 low engine oil pressure warning light l10 not shown 555845 left turn light l11 optional tail light l12 optional head light included in kit 69128 l13 optional head light included in kit 69128 m1 see 20.1 556988 starter motor ...

  • Page 170: R-311T

    138 3500 psi 3500 psi 1.04 1.04 1.04 0.77 in 3 2.48 in 3 in 3 in 3 in 3 630 psi 3000 psi b t a p d 630 psi 3000 psi b t a p d d 630 psi 3000 psi b t a p d .0669 1.04 in 3 .0669 1.04 in 3 .0669 1.04 in 3 .0669 1.04 in 3 .0669 1.04 in 3 .0669 1.04 in 3 .0669 1.04 in 3 5.04 in 3 25 psi switch 25 psi cr...

  • Page 171: R-311T

    139 c a ad ab b l2 r2 4wd l1 r1 11.9 in 3 11.9 in 3 200 psi sd st ld p l 4wd dl sw cd f t 1500 psi 6.1 in 3 p t l r in out a b c d e f 1500 psi 300 psi 300 psi 300 psi 50 psi 4wd valve control valve steering valve steering cylinder lift valve backpressure valve right wing cylinder front right cylind...

  • Page 172: R-311T

    140 x w w w x w x w w-x o-ring face seal size o-ring boss dash size w-x o-ring face seal size o-ring boss dash size w-x o-ring face seal size w-x o-ring face seal size o-ring face seal size w-x o-ring face seal size o-ring face seal size o-ring face seal size w-x o-ring face seal size o-ring face se...

  • Page 173: R-311T

    141 > change from previous revision r-311t adapter part number. Dash size adapter type (w) o-ring (x) o-ring (y) o-ring (z) o-ring 339979 6-6 straight adapter 339909 339897 339983 8-6 straight adapter 339910 339897 339984 8-8 straight adapter 339910 339898 339989 10-10 straight adapter 339911 339899...

  • Page 174: Fluids and Compounds

    Fluids and compounds * refer to the parts & maintenance manual for the correct hydraulic oil requirements for your machine. Textron golf, turf & specialty products offers a high usage parts catalog illustrating commonly used parts through easy to read line drawings. See your local tgtsp dealer for a...

  • Page 175: Index

    143 index 1000050...................... 75 1000588...................... 49 1000649............... 53 , 57 1000700............... 85 , 91 1000843...................... 85 1001311...................... 77 1001802...................... 50 1001885........... 115 , 117 1001963.................... 105 10...

  • Page 176: Index

    144 index 351124 .................90 , 94 352604 ........................77 352726 ........................57 353914 ........................61 354065 ........................94 357613 ........................94 358794 .. 43 , 55 , 73 , 83 , 111 358795 ........................55 358949 ................

  • Page 177: Index

    145 index 4135582...................... 83 4137099...................... 69 4137138.................... 107 4137139...................... 63 4138341...................... 83 4138342...................... 83 4138510...................... 63 4138589.................... 109 4140149........................

  • Page 178: Index

    146 index 4203443.......................79 4203444.......................79 4203520.......................83 4203602.....................133 4203603.....................133 4203604.....................133 4203605.....................133 4203606.....................133 4203607.....................133...

  • Page 179: Index

    147 index 450411 . ................ 65 , 75 450422 . ....................... 71 450453 . ....................... 47 452002 . ..................... 117 452004 . .. 37 , 41 , 69 , 99 452006 . ..37 , 41 , 43 , 45 , 65 , 75 , ..77 , 79 , 99 , .....103 , 107 , 109 , 111 , ... 113 452007 . ..................

  • Page 182

    Jacobsen, a textron company 11108 quality drive, charlotte, nc 28273 www.Jacobsen.Com 800-848-1636 when performance matters. ™ qualità, prestazioni e assistenza di livello internazionale world class quality, performance and support equipment from jacobsen is built to exacting standards ensured by is...