Jacto PJH Operator's Manual

STATEMENT OF LIMITED WARRANTY

 MÁQUINAS AGRÍCOLAS JACTO S.A. shall warrant the equipment described in this

manual and shall repair or replace parts and components which, under normal operation and

wear, in accordance with technical recommendations, show DEFECTS IN MATERIAL OR

WORKMANSHIP, based on the following conditions.

WARRANTY PERIOD

- 01 (one) year from the date of sale to the original purchaser.

WARRANTY APPLICATION

- JACTO shall honour this warranty, free of charge, if any part or component shows defect

in  MATERIAL OR WORKMANSHIP, after final analysis at the factory.

THIS WARRANTY SHALL BE NULL & VOID IN CASE OF:

- Misuse of the equipment against specifications in the OPERATOR'S MANUAL, overwork

or accidents.

- Preventive/remedial maintenance performed by unauthorized people.

- Use of parts and components not supplied by JACTO.

- Modification of the equipment or any characteristic of the original design.

THIS WARRANTY SHALL EXCLUDE:

- Parts which show wear and tear due to use, UNLESS THEY SHOW DEFECTS IN

WORKMANSHIP, ASSEMBLY OR MATERIAL.

- Damages resulting from accidents.

- Transportation or freight of the equipment, parts and components in case such warranty

is not approved.

- Transportation and mobilization of technicians.

GENERAL INFORMATION:

- Parts replaced within the warranty period shall be property of JACTO.

- The warranty on replaced parts and components shall expire together with the equipment

warranty period.

- Eventual delays in performing services shall not give the owner right either to indemnity or

to extension of the warranty period.

- JACTO reserves the right to modify its products or to interrupt the manufacture without prior notice.

Tank

Lever

Rod

Lance

Hose

Trigger

valve

Diaphragm

Chamber

Nozzle

Lid

2- SPRAYER VIEW

1- INTRODUCTION

This manual contains information for the proper assembly, operation and care of your sprayer.

Carefully read and follow the instructions contained in this manual before using your sprayer.

3- SPECIFICATIONS

Pump

- Type ........................................ Piston

- Material .................................... Polyamide

- Working pressure (max.) .......... 6 kgf/cm²

Lance length .............................. 600 mm

Hose length ............................... 1,350 mm

Nozzle fitted .............................. JD-12P

Model ......................... PJH

Net weight .................. 5,4 kg

Tank

- Capacity ................... 20 liters

- Material .................... Polyethylene

- Fill opening diameter . 140 mm

11/2004 - 120543 - 0004-MI

M Á Q U I N A S   A G R Í C O L A S   J A C T O   S . A .

Rua Dr. Luiz Miranda, 1650

17580-000 - Pompéia - SP - Brasil

Tel.: +55 14 3405-2100 - Fax: +55 14 3452-1306

E-mail: impex@jacto.com.br

Home page: www.jacto.com.br

OPERATOR'S MANUAL

PJH