1. DL manuals
  2. Jacuzzi
  3. Hot Tub
  4. Platinum Series
  5. Owner's Manual

Jacuzzi Platinum Series Owner's Manual

Other manuals for Platinum Series: Owner's Manual
Manual is about: Whirlpool Spa

Summary of Platinum Series

  • Page 1

    Platinum series whirlpool bath r quantum ™ plus whirlpool spa owner's manual.

  • Page 2

    Important safety information read and follow all instructions read manufacturer’s safety information provided with all optional equipment. Warning — risk of injury: children, the elderly, and the infirm should not use the spa unless they are supervised at all times. Infants should not be permitted i...

  • Page 3: Quantum Plus Whirlpool Spa

    Quantum plus whirlpool spa owner’s manual contents installation ______________________________________________________ 2 inspection and shipping claim _______________________________________ 2 positioning your spa _______________________________________________ 2 electrical requirements ____________...

  • Page 4: Installation

    Installation inspection and shipping claim check for shipping damage upon receipt of the spa. Jacuzzi whirlpool bath is not responsible for damage to the spa sustained during shipment. If damage is evident before unpacking, refer to instructions regarding shipping claims on the outside of the carton...

  • Page 5: Electrical Precautions

    Electrical precautions caution: do not apply electrical power to the spa unless it is filled with water to the normal water level, which is approximately 7" below the spa rim (refer to location of water level indicator on face of skimmer). If the spa’s motor/pumps are actuated when there is not suff...

  • Page 6: Installation

    Installation equipment set-up 1. Remove the plastic sheet covering the spa. Note: stepping into the spa with shoes will scratch the acrylic surface. 2. Remove any packing materials from the spa. 3. Remove the plastic wrap from filter cartridges . 4. Locate the spa water treatment cartridge and inser...

  • Page 7: Operating Instructions

    Operating instructions now that the spa is in place, you are probably eager to take advantage of its unique designed-in features— especially the patented hydromassage performance. Besides being a beautiful addition to your indoor decor or outdoor landscaping, your jacuzzi whirlpool bath spa will pro...

  • Page 8: Operation

    Operation control panel the control panel is easy to use with fingertip control of all the spa's functions. Control of temperature, jets, blower, filtration and spa light is readily accessible at your fingertips. • •• off program liquid crystal display warm time light mode cool jets blower i0if heat...

  • Page 9: Control Panel Operation

    Control panel operation initial start-up the spa will automatically begin to operate when elec- trical power is applied. There is no on/off switch for the spa system. The control system is designed so that by simply con- necting the spa to its properly grounded power source and pressing the mode but...

  • Page 10: Operation

    Message meaning temperature set back: if the spa water is more than 20 ° f cooler than the temperature set point, the filter pump and heater will automatically activate. This is a normal spa function; no corrective action is necessary. Freeze protection: if a freeze condition is detected, the pumps ...

  • Page 11: Normal Operation/whirlpool

    Normal operation/whirlpool system you can enjoy the spa with or without activating the whirlpool. Either way, bathing in your spa can be pleasurable, as well as therapeutic. After a busy, stressful day, you can look forward to soaking in your spa in still water with no turbulence—only the gentle war...

  • Page 12: Operation

    10 operation six-jet wave seat a separate knob located on the inside of the spa rim controls this function. Rotate to increase the cycle rate and rotate in the opposite direction to decrease the rate. Control knob for wave seat jets.

  • Page 13: Filtration

    11 water quality and water chemistry maintaining water quality and water chemistry in your spa is extremely important and should be a regular part of your spa maintenance program, as a neglected spa can be a breeding place for dangerous bacteria. The water quality of your spa is maintained by a comb...

  • Page 14: Maintenance

    12 maintenance balancing ph for good hygiene and equipment longevity, main- tain the ph of your spa water according to the instruc- tions provided. Ph is the measure to determine if the spa water is too acid (low ph), or too alkaline or basic (high ph). The ideal range for spa water is 7.4 to 7.6 ph...

  • Page 15: Maintenance

    13 maintenance the suction cover located in the foot well area should be checked at least once a week for collected debris, such as leaves, hair, etc., and cleaned as necessary. It may not be necessary to remove the suction cover to clean it, but if you need to, remove the center screw with a philli...

  • Page 16: Maintenance

    14 maintenance automatic filtration/maintenance if you plan to be away, minimum water quality will be maintained by running the filter system. If you will be away for an extended period, however, we recommend that you drain the spa (following the procedure described under winterizing on this page), ...

  • Page 17: Cleaning Your Spa

    15 light bulb replacement cleaning your spa your spa shell consists of two layers of plastic materials. Its smooth top surface of acrylic is tough and durable and contains concentrated color. This is sup- ported by a substantial thickness of fiberglass-rein- forced polyester resin. A catalyst causes...

  • Page 18: Troubleshooting Guide

    16 troubleshooting guide a. Clean strainer/skimmer. B. Clean or replace filter. C. See chemistry section. D. See maintenance section. E. Use clarifier or drain and refill spa. F. Check filter motor connection on the electrical cabinet. A. Repair leak. B. Use rigid spa cover; lower thermostat setting...

  • Page 19: Troubleshooting Guide

    17 5. Noisy pump and motor. 6. Water leakage at pump shaft (rotating connection between pump and motor). 7. Motor will not start. 8. Motor stops. 9. Air blower does not operate. 10. Low water flow from six-jet wave seat a. Clean strainers b. Locate and repair leaks. C. Tighten fasteners. D. Add wate...

  • Page 20: As Fill Spout

    Product specifications are subject to change without notice. Use installation instructions supplied with product. Printed in the u.S.A. Jacuzzi whirlpool bath national headquarters p.O. Drawer j, walnut creek, ca 94596 (925) 938-7070 service support: call (800) 288-4002 jacuzzi whirlpool bath has ob...