Jadever JCL-1.5K Manual - Set09
(II)
7
and the stable symbol appears.
Off: it starts checking weight when the weight and amounts are within the checking range
8)
SET07
beep setting: Hi,ok ,Lo,out,no.beep
Hi: There will be a warning sound when the material quantity is more than the upper limit,
and the weight of the material is more than 20 divisions
Ok: There will be a warning sound when the quantity of the articles is between the upper
and lower limit (including the upper and lower limits).
Lo:
There will be a warning sound when the material quantity is less than the lower limit,
and the weight of the material is more than 20 divisions.
Out: There will be a warning sound when the material quantity exceeds the upper and
lower limits, and the weight of the material is more than 20 divisions
no.beep: No sound alarm.
9)
SET08
external equipment setting: PC , JMS , Godex , BIRCH, ZEBRA, DMP,
GP, CK , ET , CX, U-KEY.
PC: computer output
JMS: connect with weighing system
GODEX: Godex printer (paper size 5cm*3cm)
BIRCH: Birch printer (paper size 5cm*3cm)
ZEBRA: Zebra printer (paper size 5cm*3cm)
DMP: Dot matrix printer (SH-24)
GP:Adhesive label sticker printer (5cm*3cm)
CK: thermal printer (Chinese available)
ET: Large LED display
CX: CX large screen display (version 0.02)
EXCEL: Work with the function of “Use Serial Keys” in Windows in outputting the data to
Excel. Reference user manual: http://www.jadever.com.cn/Download.aspx
U.KEY: U.KEY connector works with PC to send the weighing data to computer
(WinXP/Win7) in form of Excel and so on.
Note: Special setting is needed by distributor if you want to print in Chinese.
10)
SET09
baud rate setting: 9600, 4800, 2400
11)
SET10
printing modes setting: key, stable, contin
contin:Printing continually
stable:Printing when stable with more than 20d placed on the pan
key:Printing by pressing keys