Slugger ® usa5 slugger ® portable magnetic drilling machine operator’s manual hearing protection required eye protection required model #18066 (120v) or #18080 (220v) serial # date of purchase beware of rotating machine parts line voltage present never place fingers near cutting area or machine arbo...
Slugger ® portable magnetic drilling machine congratulations on your purchase of a slugger® portable magnetic drilling machine. Slugger® drilling machines are designed to deliver fast, efficient hole drilling performance in portable applications. Please take a moment to complete and mail your produc...
Important safety instructions warning! Warning read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refer...
Important safety instructions 4 c) prevent unintentional starting. Ensure the switch is in the “off” position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on ...
1. If you require an additional manual, please contact jancy engineering at (563) 391-1300 for a free copy. 2. Never place hands, fingers, gloves or clothing near cutting area or rotating machine parts. 3. Always disconnect machine from power source before changing cutters, clearing chips, refilling...
Warning! Improperly connecting the grounding wire can result in the risk of electrical shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with tool. Never remove the grounding prong from the plug. If the cord o...
Remove all contents from packaging and inspect to ensure no damage was incurred during shipping. Your usa5 package should also include the following: contents of package description part # qty operator's manual lit104 1 product dvd lit032 1 warranty card 0070342 1 3/16" pilot, 1" depth of cut 16001 ...
1. Select correct pilot pin and place in cutter shank from the rear. Align flats on cutter shank with arbor body set screws. Insert cutter in arbor body. 2. Tighten set screws securely on cutter shank flats. Note: set screws should be recessed in arbor body when tight. 3. The surface you are working...
1. Magnetic base not holding securely • material is too thin to engage magnet. • surface of material being drilled must be free of chips, debris, rust and mill scale. • size of cutter exceeds machine’s rated capacity. • check magnet face for unevenness, nicks and burrs. • welding equipment connected...
1. The motor slide may become loose and require adjustment after the machine has been in service. Refer to parts breakdown and become familiar with the usa5 parts. Locate motor slide cover plate (item #31 on page 13) and adjustment screw (item #8 on page 14). Using the 3 spoke feed handles, position...
Control panel and parts list 11 item description part # qty 1 power cord assembly, 120v 0151550 1 power cord assembly, 220v 0151551 2 motor on/off switch 0151035a 1 3 m4 nut uh4604 1 4 m4 lock washer uh2046 1 5 m4 x 10 dsphms uh0418 1 6 m3 x 12 crfhms uh0316 4 7 control panel plate 0151057j 1 contro...
Machine and arbor breakdown 12 14 12 9 8 7 6 5 4 3 2 1 13 15 11 10 19 16 18 17 25 20 21 22 23 24 16 arbor assembly (0151441) a 1 3 4 18 17 16 15 14 13 6 8 10 9 11 2 38 12 20 21 22 11 12 23 19 27 14 15 30 29 31 32 35 19 34 36 33 7 5 39 26 25 24 37 28 23 b.
Machine and arbor parts lists 13 item description part # qty 1 motor assembly, 120v 04600r 1 motor assembly, 220v 04602r 2 pipe handle 0010224 1 3 chip guard assembly 0151570 1 4 arbor assembly 0151441 1 5 drill frame 04700r 1 6 1/4" id x 5-1/4" tubing uh6005 1 7 quick elbow coupler 0070034-n 1 8 qu...
14 motor breakdown and parts list item description part # qty 1 internal retaining ring uh4152 1 2 motor spindle 04522 1 3 woodruff key 0010142 1 4 ball bearing uh3057 1 5 external retaining ring uh4025 1 6 spindle seal 04594 1 7 lower gearbox 04530s 1 8 m6 x 25 shfcs uh0652 1 9 m8 x 40 hhcs uh0818 ...
15 dimensions and specifications dimensions and specifications max height 23-5/8" (600mm) min height 20” (508mm) width 7-1/2" (191mm) length 11-9/16" (294mm) weight 51 lbs. (23kg) motor 1.8 hp 1400w (single phase) 120v / 11.7a ~ 220v / 5.8a 310/610 rpm (no load) - 180/340 rpm (load) arbor bore 3/4" ...
Your distributor tel · 563.391.1300 or fax · 563.391.2323 2735 hickory grove road · davenport, iowa 52804 email · jancy@jancy.Com / web · jancy.Com lit104h © jancy engineering inc.™ 01/11 other available s lugger ® drills trusted. Tested. Tough.™ description model # max diameter depth capacity usa10...
