Jasco ZW3103 User manual - Basic Operation
Basic Operation
The connected light can be turned
ON in three ways:
1. With a Z-wave remote.
2. Manually with the pushbutton on the
Z-Wave module.
3. By the Load-Sensing feature. Normally, the Z-Wave
module controls the
ON/Off state of the connected
light and power is either turned On or Off at the module
(either manually or by the remote). If the switch on the
connected light is used, the Z-Wave control circuitry
automatically senses that the light is being turned On
and activates the Z-wave controlled outlet, providing
power to the connected device. This feature is disabled
by default; see the section on advanced operation for
instructions on how to enable it.
Remote Control
Jasco Z-Wave remotes provide control of an Individual device, Groups
of devices and Scenes. Other brands of Z-Wave Certified remotes
may not offer as much flexibility in how you can set up your lighting
control network. Please refer to your remote control’s instructions for
details on its capabilities and instructions for adding and controlling
devices.
Manual Control
The Front Panel Pushbutton on the 45702 Lamp Module
allows the user to:
1. Manually turn the connected lighting ON/OFF by
pressing the button.
- This is a toggle switch; if the light is
OFF, pressing the button
turns the light