Jasmine Concerto KT88-PP Owner's Manual - page 5
Installation _______________________
This section includes information on how to unpack
and position your Jasmine KT88-PP Tube Integrated
Amplifier.
After carefully unpacking your Jasmine KT88-PP Tube
Integrated Amplifier, inspect for any shipping damage
and call your dealer immediately if any is found. Do not
plug your Jasmine KT88-PP Tube Integrated Amplifier
into any outlet if you find shipping damage.
Please save all packing materials so the unit can be
easily and safely shipped if the need arises.
Included in the carton, you will find an accessory kit
that contains the following:
z
Four KT88 tubes
z
Four 12AU7 tubes
z
AC power cord
z
One pair of gloves
Each tube is labeled, such as V1, V2, … etc. The same
label also appeared on the top side of the amp.
First of all, place the amp on a solid place, then remove
the tube cover by the screw driver. Unpacking the
tubes, and plug in the according slots.
The tubes are tested and strictly matched before
packing in the factory. To be sure you have plug the
tubes in the right place before powering on the amp.
Otherwise, will reduce the sound quality.
After all tubes are installed, Please re-fixed the tube
cover.
Unpacking
The Accessory Kit
Installing Tubes