Jasmine Concerto KT88-PP Owner's Manual - page 7
Connections _______________________
This section provides instructions to connect the
Jasmine KT88-PP Tube Amplifier to the rest of your
music system. Below is an illustration of the Jasmine
KT88-PP Tube Amplifier rear panel, showing all inputs
and outputs.
Right SP Voltage Mode Left SP
Terminals Switch Terminals
Input Connectors AC Inlet
Avoid allowing static shocks to be applied to the inputs
or outputs. To prevent static shocks, touch any
grounded surface, such as the chassis of a component
that is plugged into an AC socket, before connecting or
removing a cable.
Inputs and outputs can be safely connected to the
Jasmine KT88-PP Tube Amplifier when the AC power
is switched off.
Check to make sure your Jasmine KT88-PP Tube
Amplifier has been set for operation at your AC line
voltage. Attempting to use your Jasmine KT88-PP Tube
Amplifier at any voltage other than that specified on the
rear of the unit may cause damage that is not covered
by Jasmine’s warranty.
Jasmine AC Power Mode:
The 230V mode is suitable for using in 220 ~ 240V
voltage environment.
Connecting to AC Power