JAWA ZVL 210 Service Manual - page 9

www.jawamoped.com

4. Clutch Dismantling

After removing two M 5 x 30 screws, lift off

the left-

hand clutch cover.

Using the clutch drum retaining jig No. 928-1000-1.5

retain the starting clutch drum and loosen

the nut with

the spanner No. 17 (Fig. 8). Pull off

the clutch drum

using the drag No. 4T 210-2200-01

(Fig. 9). With a

screwdriver remove three circlips

 from the recesses to

loosen the clutch starting shoes (Fig. 10)

For re-assembly use the washer No. 4T 210-2100 and clutch

drum drag No. 4T 210-2200-01 and secure the clutch with the

circlips (Fig. 11).

After having removed the drum with starting

shoes,

rotate and gently pull the starting drum

with the sma11

pulley to remove it together with

the indented belt.

Work carefully so as not to damage the needle

bearings

and washers.

ZVL model 210   Workshop Manual   Page 11                    

jkw