Jay-tech 968R User Manual - Connection With Tvs
9
15. Direction Buttons:
Left,
Right,
▲Up (TV mode CH+), ▼Down (TV mode
CH-).
16. GOTO: Press [GOTO], according to different types and contents of discs, the
display on the screen is as the following:
Press [GOTO] once when the disc is being played back, TV screen shall display
the disk type, the number of titles/sections (songs) in the disc, the title
number/section (song) number of the currently playing item, and play time of the
section (song).
Input a designated title, section (song), and time, and then press [Enter] to
activate the designated title, section (song) and play time directly.
17. Play/Pause: Press this button once, and the player shall temporarily stop playing,
image and sound shall stay at static state. Press [Play/Pause] again to resume
normal playing.
18. Stop: Pressthis button to stopin playing state.
19. Slow:
Slow motion playing SLOW 1/2, SLOW 1/3, SLOW 1/4, SLOW 1/5, SLOW
1/6, SLOW 1/7.
20. REPEAT: Press this button to repeatedly play the selected titles/sections (DVD)
or a single song/whole disc (VCD). Press [REPEAT] once, the modes on the
screen is as the following:
For DVD - Repeat Off / Section Repeat / Title Repeat
For SVCD/VCD/CD - Repeat Off / Single Song Repeat / Whole Disc Repeat
21. MUTE: Press this button to turn off the audio and speaker outputs.
22. 23. VOL+/VOL-: Press these buttons to increase or decrease the volume.
24. 25. Previous/Next: Press these buttons during playback to switch to pervious
section or the next section.
26. 27. Fast Reverse/Fast Forward: Press these buttons to enter the mode of fast
reverse or fast forward. Press [PLAY] to resume normal playing mode directly.
Connection with TVs
Note: The AV cable with yellow lotus is used for video signal, and the one with red and
white lotus plugs are for audio signal.
The top output or input signal plug indicates video output, while the lower part contains
two output/input signal plugs. The white one indicates the left sound channel and the red
one indicates the right sound channel. You can adjust the output device switches to