Jay-tech 968R User Manual - Basic Operation

10 

Pow

Men

control the volume. 

Basic Operation 

er Operation 

Connect the power adapter with either 220V or 110V power supply, switch the 

[Power] to ON, and wait for 3 seconds to turn on the device. The device displays 

the latest shutdown state. Switch to the mode you prefer by mode button.   

Press [Setup] to enter setting menu interface, select the appropriate function from 

the menu setting. The item in brighter color indicates as the selected one, and 

press [Enter] to confirm. 

u Setup 

Press function menu setup button to setup AV OUT, Screen Subtitle, the original 

setting etc. Press [Enter] to confirm. 

System Setup 

1.  TV system: Select TV SYSTEM and press [Direction Button] to enter the 

submenu. Make your own selection according to the system of the connected TV. 

The selected systems are NTSC / PAL / AUTO. 

2.  Screen Saver: Select Screen Saver and press [Direction Button] to enter 

screen saver setup menu, which can be set as On / Off. Start the screen saving 

function to enable screen saver when the player is in stop/ open-cabinet/no-disc 

modes or the picture keeps in static state for around 60 seconds. 

3.  Video output (CVBS): Composite audio and video output by connecting the player 

to TV with a dedicated cable to enjoy better resolution. 

Note:  Only the AV cable identical to the special cable provided by the 

manufacturer shall be used.

4.  TV Type Screen Image Ratio: Select the TV Type and press the [Direction 

Button] to enter screen image ratio menu, there are total of three modes for 

selection. 

z  4:3 PS (panorama scan): For the ordinary TV, left and right margin of the 

images shall be cut off when wide screen images are being played in this