Jay-tech D968 User Manual - Basic Operation
10
Basic Operation
Power On
Connect the power adapter with either 220V or 110V power supply, switch the [Power]
to ON, and wait for 3 seconds to turn on the device. The device displays the latest
shutdown status.
System Setup
Press “SETUP” key on the keypad of the device or remote control; you can do the
below setups:
General Setup Page:
1. TV Display: You can choose the TV display in 4:3 Pan Scan, Letter Box or 16:9
widescreen.
2. Angle Mark: On / Off
3. OSD Lang: There are eight options under this item for selection: English / Chinese
/ German / Spanish / French / Portuguese / Italian / Russian.
4. Captions: On / Off
5. Screen Saver: Select Screen Saver and press [Direction Button] to enter
screen saver setup menu, which can be set as On/Off. Start the screen saving
function to enable screen saver when the player is in stop/ open-cabinet/no-disc
status or the picture stays static for around 60 seconds.
6. Last Memory: On / Off.
7. MP3 Lyric Mode: On / Off.
Audio Setup Page
1. Speaker Setup: Dual channels (LT/RT), Stereo and Virtual Surround can be
selected in the mixed mode.
2. Equalizer: None / Rock / Pop / Live / Dance / Techno / Classic / Soft.
Dolby Digital Setup Page:
1. Dual Mono: Stereo / L-Mono / R-Mono / Mix-Mono
2. Dynamic: Off ~ Full
Video Setup Page:
Panel Quality: You can setup Sharpness / Brightness / Contrast / Hue / Saturation.