JB Systems ACCU COLOR Operation Manuals - page 10
ENGLISH
USER MANUAL
JB Systems
®
8/13
Accu Color
•
Once the desired value is selected, press [ENTER] to confirm.
[AL--] Mode
Used to set the minimum value of the Amber color
•
Press the [MENU] button.
•
Press the
▲ or ▼ buttons until
[AL--]
is shown on the display.
•
Press the [ENTER] button to select. The display starts blinking.
•
Use
▲ and ▼ buttons to select the speed (A000…A255)
•
Once the desired value is selected, press [ENTER] to confirm.
[SoUA] Sound Mode
Used to make shows working on sound or not.
•
Press the [MENU] button.
•
Press the
▲ or ▼ buttons until the display shows
[SoUA]
.
•
Press [ENTER] button to select. The display starts blinking.
•
Press [ENTER], the projector is now working in sound mode.
If you want to go back to normal running mode: press the [MENU] button.
[Led] Mode
Led on : display is always on.
Led off : display is off when not used.
•
Press the [MENU] button.
•
Press the
▲ or ▼ buttons until the display shows
[LEd]
.
•
Press [ENTER] button to select. The display starts blinking ans shows [on] or [oFF]
•
Select [on] or [oFF] by pressing the
▲ or ▼ button.
•
Press [ENTER] to select the desired mode.
•
The display will turn off after some time.
•
The display will turn on again by pressing one of the buttons [MENU], [
▲], [▼] or [ENTER]
[node] Function
Used to slow down the dimming speed.
•
Press the [MENU] button.
•
Press the
▲ or ▼ buttons until the display shows
[node]
.
•
Press the [ENTER] button. The display starts blinking and shows [nod0…nod4]
•
Use
▲ and ▼ buttons to select
[nod0…nod4]
where 0 is the fastest and 4 the slowest mode.
•
Once the desired mode is selected, press the
[ENTER]
button to confirm.
[UErn] Software Version
Used to show the software version of the unit.
•
Press the [MENU] button.
•
Press the
▲ or ▼ buttons until the display shows
[UErn]
.
•
Press the [ENTER] button. The display starts blinking and shows the version
[UE2.0]
.
•
Press the [MENU] button to leave.