JB Systems CMX 24 Operation Manual - page 7
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
9/93
CMX24
HOLD
The
{FADE}
fader has to be placed in the highest position.
The {
MASTER A
} fader has to be placed in the highest position.
All the preset faders (A and B) have to be placed in the lowest position.
Place
{PRESET A 1}
at 75%.
Place
{PRESET A 2}
at 50%.
Press and hold the
button above the
FADE
fader. The led above this button is lit.
Place
{PRESET A 1}
at 0%.
Place
{PRESET A 2}
at 100%.
Place
{PRESET A 3}
at 75%.
Place
{PRESET A 4}
at 100%.
The light effects keep the actual intensity.
Release the
button.
The light effects will adapt directly to the new intensities.
Using the
HOLD
button you can maintain the current scene while setting the next scene.
Move the
{FADE}
fader until the display shows [10.0] (a fade time of 10 seconds)
Press and hold the
button.
Place
{PRESET A 1}
at 100%.
Place
{PRESET A 2}
at 10%.
Place
{PRESET A 3}
at 75%.
Place
{PRESET A 4}
at 0%.
Release the
button.
The scène will change slowly (within 10 seconds) from the previous to the next. You’ll get a perfect fade. The
HOLD
button always works despite of the current mode.
DOUBLE PRESET MODE:
In this mode you can use the control as an 12 channel A-B control. Change the mode to double preset:
Press and release
until the
[DOUBLE PRESET]
lamp will be
lit above the master A and master B faders.
Set the following faders:
Place
{PRESET A 1}
fader at 100%
Place
{PRESET A 2}
fader at 50%
Place
{PRESET A 3}
fader at 25%
Place
{PRESET A 4 - 12}
faders at 0%
Place
{PRESET B 1}
fader at 0%
Place
{PRESET B 2}
fader at 50%
Place
{PRESET B 3}
fader at 75%
Place
{PRESET B 4}
fader at 100%
Place
{PRESET B 5}
fader at 50%
Place
{PRESET B 6 - 12}
faders at 0%
Place
{MASTER A}
fader at 0%
(lowest position!!!)
Place
{MASTER B}
fader at 0%
(highest position!!!)
No lamps will be lit.
Move the
{MASTER A}
fader slowly to 100% (highest position). Channels 1 to 3 will be lit immediately to
100%, 50% and 25%
Move
{MASTER A}
fader and
{MASTER B}
fader simultaneously to the lowest position. Master A will
change to 0% and Master B will change to 100%. Channels 1 to 5 will be lit at 0%, 50%, 75%, 100% and
50%. You have made a fade from the first to the second scene.
You can change this scene by moving the
PRESET B
faders. Moving the
PRESET A
faders doesn’t change
anything.
Now, you can set the
PRESET A
faders to a new scene.
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
10/93
CMX24
Move
{MASTER A}
fader and
{MASTER B}
fader simultaneously to the highest position. Master A changes
to 100% and Master B changes to 0%. You will a slow fade from the first scene to the second scene. You
are working in the A-B preset mode.
IMPORTANT:
Move the {MASTER A} fader to
100%
(highest position) and the {MASTER B} fader to
100%
(lowest position). The CMX24 will choose for the highest values.
Channel 1
at 100%
Channel 2
at 50% (A:50% is higher then B:25%)
Channel 3
at 75% (B:75% is higher then A:25%)
This only works when BOTH masters are set at 100%. The highest intensity has priority
PARK
Set
{MASTER A}
fader and
{MASTER B}
fader at 50%, middle position. The scène is a combination of both
presets.
Press and hold the
button above the Master B fader. Master B will be set at 100% ( this is visible
on the green leds). When a fade time is set, this will happen slowly.
Press and hold the
button above the Master A fader. Master A will be set at 100% ( this is visible on
the green leds). When a fade time is set, this will happen slowly.
CHASE/SCENES mode
This control mode allows you to store a scène or a chase of 24 channels in every Preset B fader. The
CMX24 has 4 pages, so you can store altogether 48 scenes/chases.
You can activate this mode like this:
Press and release the
button until the
[CHASE SCENES]
lamp is lit above the master A/B faders.
Concepts:
Scene/Chase:
A scène is 1 setting of the intensity of the 24 channels. This is in fact a chase with 1 scene. Only this setting
will be showed constantly.
A chase contains multiple scenes and each scene contains the intensity for 24 channels. The scenes will be
showed one by one (and you can set the speed/fade time).
You have 4 pages with each 12 PRESET B faders which each can contain a scene or a chase. So you can
store 48 chases/scenes.
Record mode:
The CMX24 can work in 3 modes:
o
Safe mode, in this mode you can’t change the programs
o
Program mode, in this mode you can save/erase programs
o
Edit mode, in this mode you can change programs
Safe mode and program mode are always available, whether you are working in Single Preset, Double
Preset or Chase/Scenes mode. The Edit mode is only available in the Chase/Scenes mode. Next drawing
shows you how you can change from one modus to another.