JB Systems PSX-15 Operation Manual - page 2
ENGLISH
OPERATION
MANUAL
JB SYSTEMS
1/18
PSX-15
OPERATION MANUAL
FEATURES
y
Light weight heavy duty Polypropylene cabinet
y
Perfect for permanent installations
y
Perfect for Portable use
y
High power 15” Woofer with ALU basket
y
High power 1,75” Titanium Compression Driver & Horn
y
Built-in Rigging points
y
Built-in stand adapter
y
Dual Speakon type connectors
y
Built-in heavy duty carrying handle
y
Heavy duty rubber feet.
SAFETY PRECAUTIONS
y
The PSX-15 can easily reproduce sound pressure levels (SPL) sufficient enough
to cause sever and permanent hearing damage. Always protect your ears when
you are exposed to SPL in excess of 85dB!
y
Be sure that your power amp is turned off before connecting the speakers.
y
Even if the speaker cabinet is made of water resistant material, the woofer and
tweeter are not protected against humid and rain. Therefore this speaker is
intended for indoor use only, use of this product outdoors, in humid conditions,
voids all warranties.
y
Always mount this speaker in safe and stable matter.
y
Take special care when the cabinets are suspended. This is potentially
dangerous and should only be carried out by technicians who have perfect
knowledge of the techniques and regulations of rigging speakers!
CONNECTIONS
The PSX-15 has two Speakon type connectors. Both connectors are connected in
parallel. This means that you can connect a second PSX-15 in parallel.
Attention: when a second speaker is connected, the impedance drops from 8Ω to
4Ω! In most cases you can only connect 2 cabinets together. However, if your
amplifier supports 2Ω loads, you can connect up to 4 cabinets to each amplifier
output.