JB Systems STRIKER Operation Manual - page 9
ENGLISH
USER MANUAL
JB SYSTEMS
®
7/10
STRIKER
HOW TO SET THE RIGHT STARTING ADDRESS:
Refer to the setup menu to learn how to set the starting address on this unit. The starting address of each
unit is very important. Unfortunately it is impossible to tell you in this user manual which starting addresses
you have to set because this completely depends on the controller you will use… So please refer to the user
manual of your DMX-controller to find out which starting addresses you must set.
DMX-CONFIGURATION OF THE STRIKER IN 5 AND 19CH MODE:
5 CHANNEL MODE :
DMX
Channel
DMX-value
function
remarks
1
000-255
Pan
PAN
2
000-255
Tilt
TILT
3
000-255
Focus
FOCUS
4
000-007
Manual
008-047
Auto program 1
AUTOMATIC PROGRAMS
COLOR/GOBO
048-087
Auto program 2
088-127
Auto program 3
128-167
Auto program 4
168-207
Auto program 5
208-247
Auto program 6
248-255
Color/gobo sound control
SOUND CONTROLLED
COLOR/GOBO
5
000-007
Manual
008-032
PROGRAM 1
AUTOMATIC PROGRAMS
PAN/TILT
033-058
PROGRAM 2
059-084
PROGRAM 3
085-110
PROGRAM 4
111-136
PROGRAM 5
137-162
PROGRAM 6
163-188
PROGRAM 7
189-214
PROGRAM 8
215-240
PROGRAM 9
241-255
Pan/Tilt sound control
SOUND CONTROLLED PAN/TILT