Summary of AD 4200
Page 1
Usa version ad 4200 d ua l s o l d e r i n g s tat i o n.
Page 2
1 we appreciate the confidence you have placed in jbc in purchasing this station. It is manufactured to the most stringent quality standards in order to give you the best possible service. Before turning on your station, we recommend you to read these instructions carefully. You have pursached a adv...
Page 3
2 structure of advanced soldering stations system the advanced series has basic modules giving you full flexibility for choosing what you need for the work in hand, the modules being supplied separately. Dual control unit - ad 4200 usa ref. 4200100 model ad 4200 can be used with two tools simultaneo...
Page 4
3 handpieces 2210 and 2245 the following soldering handpieces can be connected to the ad 4200 station: - handpiece 2210 ref. 2210000. Power: 20w. For high precision work, smd etc. Available cartridges 2210 : see page 15. - handpiece 2245 ref. 2245000. Power: 50w. For general soldering work. Availabl...
Page 5
4 sleep function one of the series advanced features is that when the handpiece is placed in the holder, the temperature at the tip drops automatically to the sleep temperature. This function is only possible because of the quick response time which does not make the user realise the temperature ris...
Page 6
5 alignment xx xxxxx important. - it is essential to insert the cartridge till the end for a good connection. Take the mark a s reference. Ac 2600 ref. 2600000 console ac 2600 the console ac 2600 is designed for modifying the original regulation program parameters of the following advanced control u...
Page 7
6 hot tweezers ad 4200 station allows to connect two different models of tweezers, each one with its respective range of cartridges and stand: - micro hot tweezers pa 1200 ref. 1200000. - hot tweezers pa 4200 ref. 4200000. For tweezers to work properly, the following components are required: control...
Page 8
7 operation led lights red led -on- when lit, it indicates that the station is plugged in the mains. Green led -ready- when lit, it indicates that the system is ready and correctly set for working. The green led light is on after a few seconds, is the time needed to carry on the self-checking system...
Page 9
8 micro hot tweezers pa 1200 for micro hot tweezers to work properly, the following modules are required: - control unit. - micro hot tweezers pa 1200 ref. 1200000. For general precision desoldering with smd components. Power: 40w. Effective power per cartridge fitted: 20w. - stand pa 8100 ref. 0748...
Page 10
9 a a a Øa a ref. A inches 2245-271 0.059" 2245-272 0.078" chip components ref. A inches 2245-273 0.157" 2245-274 0.236" 2245-275 0.314" 2245-276 0.393" 2245-277 0.590" 2245-278 0.787" dual in line ic ref. A inches 2245-279 0.314" 2245-280 0.433" qfp and plcc ref. A inches 2245-281 2245-282 cable st...
Page 11
11 jt 7000 hot-air flow repair station for desoldering all types of smd’s particulary qfps and plccs of any size. Te 5000 hot-air flow repair station designed for soldering and desoldering small and medium-sized smds. Ar 5500 desoldering station which enable the rapid desoldering of all kinds of ins...
Page 12
12 electric wiring diagram.
Page 13
13.
Page 14: 2245
14 range of cartridges to solder smt ic all the cartridges shown are actual size. 2245-003 Ø 0.023” 2245-004 Ø 0.039” 2245-005 Ø 0.051” 2245-012 0.177” x 0,07” 0.177” x 0,07” 2245-009 qfp 2245-010 plcc 2245 * the total lenght of these cartridges is 20mm longer in order to reach areas of difficult ac...
Page 15: 2210
15 2210-009 2210-001 2210-003 2210-005 2210-002 2210-004 2210-006 2210-008 2210-007 Ø 0.011” Ø 0.007” Ø 0.023” Ø 0.027” 0.09”x0.027” Ø 0.007” Ø 0.039” Ø 0.039” 0.051”x0.023” Ø 0.007” 2210-010 2210 ref. 2210-001 jbc 2210-001 95238 2210-012 Ø 0.027” for chip components tunnel type for dual in line ic ...
Page 16
0780189-0 warranty english the jbc 2 years warranty, guarantees this equipment against all manufacturing defects, covering the replacement of defective parts and all necessary labour. Malfunctions caused by misuse are not covered. In order for the warranty to be valid, equipment must be returned, po...