JBL 585000 Installation manual - page 21
21
201401/IvxIM_v2.2
JBL Intellivox Installation Manual
• The File Name field (at the top of the Load control
parameters settings dialogue box) indicates the
last-used settings file name. If this is the first time
that the installation of WinControl has been used, a
default settings file is selected. The default location
for this file is in [My Documents folder]\
Duran
Audio BV\WinControl\Settings, though as
this is alterable, it is possible that a different location
may be displayed, depending on how the particular PC
being used has been set up. To navigate to the location
containing the settings file to be uploaded, click on the
Browse button
(the folder symbol to the right of
the File Name field), which will open a further Open
dialogue box. Navigation may be continued in the
normal Windows manner. Note that Intellivox settings
files always have an
*.ini file extension.
• Select the correct settings file and click Open. Then in
the Load control parameters settings dialogue box,
ensure that the proper parameter groups are selected
and specify the preset(s) to be uploaded, click OK* to
continue. An Info dialogue box will then open showing
additional information, in this box click OK to start the
upload process. This will transfer the pre-determined
Intellivox parameters to the loudspeaker. The Control
parameters dialogue box can now be closed and the
upload is complete.
• If there are further loudspeakers on the network to have
their settings files uploaded at this time, the procedure
can be repeated by selecting the next Intellivox. It is
possible to load the same settings file into several
Intellivoxes simultaneously, should the installation
require this. See Addresses and Groups in the
WinControl Help file for more information.
* See WinControl Help files for information regarding further Load options.