JBL EON210P User Manual - page 17
17
EON210P
System
System Type:
Maximum SPL Output:
60 Hz - 20 kHz
75 Hz - 19 kHz
AC input :
120 - 240 V 50/60 Hz, voltage selector switch sets operational range
Design:
Crown
®
Class D
System Power Rating:
Output Connector:
Mixer
Input Connectors:
Channels
1-4 are XLR / 1/4" jack combo connectors
XLR is a mic level input, 1/4" is a line level input
7-8 is a 3.5 mm stereo jack
Input Impedance:
Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
Phantom Power:
30 V
Output Connectors:
Monitor outputs: one pair of 1/4"
Headphone output: one 3.5 mm stereo jack
Signal Indicators:
Main Output LED Ladder
Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Signal Indicators: Ch 1-4
Peak LED: Green = signal present, Red = input overload
EQ:
Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
System Limiter:
On Board DSP Limiting and Tuning
Speaker
LF Driver:
HF Driver:
1 x JBL 2414H-1 37.5 mm (1.5"
neodymium compression driver
Coverage Pattern:
100º x 60º nominal
Crossover Frequency:
2 kHz
Crossover Type:
Enclosure:
Polypropylene
Suspension/ Mounting:
36 mm pole socket with stabilizing screw
Handles:
One on top
Grille:
Powder coated perforated steel
Shipping Package
21.5" x 26" x 13.75"
Net Weight of System: