JBL M2 Owner's Manual - Specifications
11
English
System format:
Two-way floor-standing or soffit mountable
High-frequency transducer:
D2430K dual-diaphragm dual voice-coil compression driver
Nominal impedance:
20 ohms
Low-frequency transducer:
2216Nd 15” (381mm) Differential Drive
®
cone driver
Nominal impedance:
6 ohms
Crossover frequency:
800Hz (supplied by outboard Digital Signal processing)
Frequency range:
20Hz – 40kHz
Image Control waveguide dispersion:
120° H x 100° V
Sensitivity (1W/1m):
92dB SPL
Continuous/peak SPL@ 1m:
117dB/129dB
System requirements:
One Crown I-Tech 5000HD amplifier per speaker or one Crown
I-Tech 4X3500HD amplifier per two speakers or BSS Soundweb
London BLU-800, BLU-160 or BLU-80 processor with a Crown
Macro-Tech
®
5000i or other suitable amplifier
Recommended amplifier power:
1200 Watts per channel into 8 ohms
Input connectors:
Individual spring terminals for low-frequency and high-frequency
Enclosure construction:
25mm (1”) MDF
Finish:
Satin black lacquer
Included:
Removable ABS grille with black UL-compliant fabric;
4 steel floor spikes
Dimensions (W x H x D):
508mm x 1256mm x 356mm (20” x 49-1/2” x 14”)
Weight:
58.5kg (129 lb)