JBL Northridge E-Series E150P Owner's Manual

Other manuals for Northridge E-Series E150P: Service Manual, Service Manual
Manual is about: E-Series, Performance Series

Summary of Northridge E-Series E150P

  • Page 1

    E150p, e250p northridge ™ e series owner’s guide ®.

  • Page 2: Read First!

    2 read first! Important safety precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manu...

  • Page 3: Speaker Placement

    Speaker placement • as a general rule, bass response increases as a subwoofer is placed closer to a wall. Therefore, bass output is maximized when the subwoofer is placed in a corner. • it is also recommended that the subwoofer be positioned along the same wall as the front loudspeakers. Low-frequen...

  • Page 4: +     –

    4 analog receiver/processor – speaker-level connections use this installation method only with an analog receiver/ processor that does not have digital processing or bass management, and also does not have a subwoofer output or a volume-controlled preamp (line-) level output: connect the speaker wir...

  • Page 5

    Digital receiver/processor – lfe connection use this installation method for dolby digital, dts ® or other digital surround processors that have bass-management programming, or for analog receivers/processors that have a filtered subwoofer output: important: make sure that the lfe toggle switch on t...

  • Page 6: Operation

    Operation when the unit is plugged in and the power switch is on and no signal is received, the led on the top of the unit will turn red. When a signal is present, the led will turn green. Note: it will take several min- utes for the led to turn from green to red after the input signal to the subwoo...

  • Page 7: Troubleshooting

    Troubleshooting if you used the high-level (speaker) inputs and there is no sound from any of the speakers: • check that the receiver/ amplifier is on and a source is playing. • check that the powered subwoofer is plugged into an active electrical outlet and is switched on. • check all wires and con...

  • Page 8: Specifications

    Specifications © 2003 harman international industries, incorporated jbl is a registered trademark of harman international industries, incorporated. Part no. 350883-001 pro sound comes home ™ jbl consumer products, 250 crossways park drive, woodbury, ny 11797 8500 balboa boulevard, northridge, ca 913...