JBL radial micro User Manual - page 4
4
jbl radial
™
micro general setup
Unpack the JBL Radial
1.
™
Micro system.
Place the appropriate adapter for iPod into the docking station.
2.
Place the iPod into the adapter.
3.
Connect the power supply into the DC jack.
4.
Plug the adapter into the wall outlet.
5.
Listening to music from an iPod
Press the “power” button located on the back of the JBL Radial Micro unit to turn the unit on. A green LED will indicate that the unit is on.
1.
Select and play music using the controls on your iPod or send commands to your iPod with the remote.
2.
Adjust volume using the “+” and “–” volume buttons located on the front of the unit or on the remote.
3.
Listening to music from an auxiliary device
Connect the auxiliary device into the auxiliary-in jack using the supplied
1.
3
.
5
mm auxiliary cable.
Press the “power” button located on the back of the JBL Radial Micro unit to turn the unit on.
2.
Control music playback through your device.
3.
Adjust volume using the “+” and “–” volume buttons located on the front of the unit or on the remote.
4.
2
1
3
4
5
Charging your iPod
Make sure your iPod is securely docked in the JBL Radial Micro unit, using the correct adapter.
1.
Make sure the JBL Radial Micro system is connected to a live electrical outlet.
2.
Note: The JBL Radial Micro system will not charge other devices.