JBL radial micro User Manual - page 7
7
Symptom
Possible Problem
Solution
Note
Remote
The remote’s battery power
may be low.
Replace battery.
Redock the iPod. If problem
persists, reset the iPod.
iPod does not respond to remote
commands.
Interference from surrounding
devices.
JBL Radial
™
Micro unit is in
“off” mode.
Move your JBL Radial Micro unit
to another location.
Ensure that JBL Radial Micro
unit is plugged into wall outlet
and unit is turned on.
The remote range is up to
20
feet.
Remote only operates at close
range.
The remote battery power may
be low.
Replace battery.
Move the source unit closer to
the remote.
Possible sources of interference
include plasma displays,
dimmer-controlled lighting,
bright sunlight, and reflective
surfaces such as mirrors or
blank walls.
Manufacturer:
JBL, Inc.
Model:
JBL Radial
™
Micro
Available in:
White or Black
Requirements:
Main connection – docking connector for iPod; auxiliary connection –
1
/
8
"
(
3
.
5
mm) mini stereo jack
Drivers:
Four Odyssey
®
transducers
Power:
2
x
10
Watts @
10
% THD
Frequency Response:
60
Hz –
20
kHz
Dimensions:
Width:
8
" (
203
mm)
Height:
8
"(
203
mm)
Depth:
3
-
1
/
2
" (
89
mm)
Weight:
1
.
1
lb (
0
.
5
kg)
Input Impedance:
>
5
k Ohms
Signal-to-Noise Ratio:
>
85
dB
Power Supply:
Input:
100
–
240
V AC,
50
Hz/
60
Hz
0
.
5
A
Output:
12
V DC,
1
.
25
A
JBL
10
-Button Remote
Transmission:
IR
Frequency:
38
kHz
Operating Range:
20
feet
Battery Type:
CR
2032
3
V
Dimensions:
Width:
1
-
5
/
16
" (
33
mm)
Height:
3
-
3
/
8
"
(
86
mm)
Depth:
1
/
4
" (
6
mm)
Weight (including battery):
1
.
2
oz (
0
.
03
kg)
Technical Specifications
This device is susceptible to interference from other appliances plugged into nearby outlets. If you experience interference,
JBL, Inc., recommends moving the device or the other appliance to a different outlet.
English