Jcb JCB-BS950 Safety And Operating Manual - Technical Data
JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
TECHNICAL DATA
Voltage
220-240V~50Hz
Power input
950W
No load speed
240-350m/min
Belt size
76X533mm
Sanding size
76X130mm
Protection class
/II
Machine weight
3.4kg
NOISE INFORMATION
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
=6,85m/s²
Uncertainty K =1.5m/s²
A weighted sound pressure L
pA
: 83dB(A)
A weighted sound power L
wA
: 94dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection when sound pressure is over: 80dB(A)
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.