Jcb JCB-CD18Li Safety And Operating Manual - Operating Instructions

SO53 3LE

Customer Helpline 0845 600 5526

SO53 3LE

Customer Helpline 0845 600 5526

SO53 3LE

Customer Helpline 0845 600 5526

SO53 3LE

Customer Helpline 0845 600 5526

OPERatIng InStRuCtIOnS

nOtE: Before using the tool, 

read the safety and operating 

manual carefully.

IntEnDED uSE

The machine is intended for driving 

in and loosening screws as well 

as for drilling in wood, metal and 

plastic.

BEfORE PuttIng IntO 

OPERatIOn

a) CHaRgIng tHE BattERy

The battery charger supplied 

is matched to the Li-ion battery 

installed in the machine. Do not use 

another battery charger.

The Li-ion battery is protected 

against deep discharging. When 

the battery is empty, the machine 

is switched off by means of a 

protective circuit: The tool holder no 

longer rotates.

In a warm environment or after 

heavy use, the battery pack may 

become too hot to permit charging. 

Allow time for the battery to cool 

down before recharging.

When the battery pack is charged 

for the first time and after prolonged 

storage, the battery pack will accept 

a 100% charge after several charge 

and discharge cycles.

B) tO REMOvE OR InStaLL 

BattERy PaCK (See  1 )

Depress the battery pack release 

button (6) to release and slide the 

battery pack out from your tool. 

1

6