Jcb JCB-SDS780 Safety And Operating Manual - Operating Instructions

JCB, SO53 3LE

www.JCBDIY.com

Customer Helpline 0333 0143092  

OPERATING INSTRUCTIONS

NOTE: Before using the tool, 

read the safety and operating 

manual carefully.

INTENDED USE

The machine is intended for hammer 

drilling in concrete, brick and stone 

as well as for light chiseling work. 

It is also suitable for drilling without 

impact in wood, metal, ceramic and 

plastic.

1. INSERTING/REPLACING 

THE DRILL CHUCK (See A)

● Inserting the Drill Chuck

To work with tools without SDS-plus 

(e.g., drills with cylindrical shafts), 

a suitable drill chuck must be used. 

Insert the adapter (11) of the drill 

chuck (10) with a twisting motion 

into the SDS-plus chuck (9) until it 

can be heard to lock. The adapter 

locks itself. Check the locking by 

pulling on the drill chuck. 

● Removing the Drill Chuck

To remove the drill chuck (10), pull 

the locking sleeve (7) to the rear, 

hold in this position and remove the 

drill chuck from the tool holder.

2. INSERTING AND 

REMOVING DRILL BIT IN 

SDS

Take care that the dust protection 

cap (8) is not damaged when 

changing tools.

● INSERTING

A

10

11