Jcb JCB-SDS780 Safety And Operating Manual - 8. Adjustable Depth

JCB, SO53 3LE

www.JCBDIY.com

Customer Helpline 0333 0143092  

rotation “ ”.

Warning:Never change the 

direction of rotation while 

the tool is rotating, wait until it 

has stopped.

8. ADJUSTABLE DEPTH 

STOP

Fit the drill bit into the chuck. 

Loosen the depth stop by rotating 

the handle anti-clockwise. Slide 

the depth stop until the distance 

between the depth stop end and the 

drill bit end is equal to the depth of 

hole/screw you wish to make. Then 

clamp the depth stop by rotating 

the handle clockwise.

9. FUNCTION MODE 

SELECTION (See D)

The operation of the gearbox for 

each application is set with the 

function mode selection switch 

(4). To change between functions, 

depress the unlocking button (12) 

and rotate the selector to the desired 

operating mode.

For simultaneous drilling 

and impacting of concrete 

or masonry, choose the 

Hammer drilling position.

For drilling into steel, wood 

and plastics choose the 

Rotary drilling position.

For impacting only - for 

light chipping, chiseling 

and demolition applications 

choose the Hammer position.

12

D

12