Jcb JS710LE Safety And Operating Manual - 4. Hand Grip Areas

JCB, SO53 3LE

www.JCBDIY.com

Customer Helpline 0333 0143092  

selection.

Avoid prolonged use at very low 

speed as this may damage your 

jigsaw’s motor.

Chart 1

Material

Speed setting

Wood

5-6

Metal

3-4

Aluminum

3-5

PVC

3-4

Ceramic

3-5

4. HAND GRIP AREAS

Always ensure you maintain a firm 

grip whilst operating your jigsaw.

5. BLADE FITTING

(See C,D,E)

You can only use the blade type 

shown in Fig C. To open the blade 

holder (13) rotate the ring anti-

clockwise (Jigsaw upside down) 

and hold in position (See Fig D). 

Then fully insert the blade into the 

blade holder slot with blade teeth 

facing forward and release the ring, 

which will self rotate and clamp 

over the top of the blade. Push the 

blade into the blade holder again 

to ensure it is locked in position. 

Ensure the edge of the blade is 

located in the groove of the blade 

guide (See Fig E). To remove a 

blade, holds the blade and rotate 

13

D

10

E

C