JCF Audio Latte User Manual - Safety Information
Latte
Safety Information
Do not repair, modify, service this device except in the manner in which it is described in this manual. Doing so can
endanger the user and others as well as void the warranty.
Fuses should be replaced with the exact values stated in the manual.
To comply with most electrical wiring codes, the Latte is equipped with a 3 wire IEC style connector, the grounding
pin of which is connected to the chassis. JCF Audio, LLC accepts no responsibility for legal actions or for direct, inci-
dental, or consequential damages that may result from improper installation, configuration, or use of the Latte.
Overview
The Latte is comprised of two main sections:
1. A high-resolution stereo audio analog to digital converter
2. A section that serves as a stereo digital to analog converter or two channels of microphone pre-amplification or two
channels of reproduction amplifiers specifically for low impedance tape machine heads. This section will be called
the "DMT" section for the rest of this manual.
These two sections can operate completely independently from one another or together in a number of ways that will
be discussed in this manual.
Under normal operation the A/D section begins at the line inputs and ends at the AES compatible outputs (XLR bal-
anced or TOSLINK).
Under normal operation the DMT section begins at the AES compatible inputs (XLR balanced or TOSLINK) and ends
at the analog outputs (BAL out or AUX out)
Feature list
• Two AES compatible transformer coupled outputs (mono configurable)
• Two AES compatible transformer coupled inputs for synchronization reference and data input for both sections -
front panel switch selectable
• Line level +4 dBu analog outputs - Cinemag Transformer coupled, +27.5dBu Max. output level into 600
Ω
(+28 dBu
hi-z)
JCF Audio
J C F A u d i o
L a t t e
1