JCM Technologies Free15r Applications Manual - Free
10
3
Installation
Free
applications manual for Free system
Free system offers to the installer a fast and comfortable way to install the product.
Trigger is made by a compact plastic housing in its front with a cable output in its rear part (1).
A trim sticker (2) is given so that led and programming push are protected.
Free15r has been designed to be installed directly on the wall or built in. Fixation is made with two screws separated among
themselves by 60mm (3).
Trigger push button allows the programation of the groups and channels of activation (4).
Trigger led is visible through the window of the sticker (5).
Triggers dimensions are 87x78x15 mm (Free15r); 205x183x14 mm (Free30r); 394,4x310,5x41,6 mm (Free50r) and
394,4x310,5x78,7 mm (Free50rs ). This allows Free15r to be installed in a standard electric box, either wall mounted as built
in, both interior or exterior of the installation.
To a better adjustment of the activation area, Free30r is supplied together with an orientable wall support. This support is
also compatible with Free15r, but in this very case, it must be acquired as accessory.
Free50r / rs are also delivered with an orientable wall support, but different from the previously mentioned support.
Triggers are completely independant from the receiver. The unique thing they need for work is power.
There are two ways to install the triggers, as individual or collective.
Free50r / Free50rs support.
Free15r / Free30r support.
3.1
Installation and connections Free15r, Free30r and Free50r/rs
3
2
5
4
1
be a step ahead with technology and imagination
jcmtechnologies