JCM Technologies Free15r Applications Manual - Free
12
3
Installation
Free
applications manual for Free system
3.2
TAG
FreeT Installation
FreeT ofers to the user a very simple and comfortable way of installation, either vehicle, clothe or as keyholder.
To install it in the vehicle, there is a car holder. It must be sticked to the car by removing the sticker protection. We recommend
to stick it in a plane surface.
For a correct application, the surface must be clean while sticking the car holder.
Just in case that the car holder is placed in the windshield, we recommend to allocate it in the dotted area to guaranty a better
range in athermal windows.
To place the TAG in:
· Car Holder, only slide the Tag through the car holder guides.
· Clothes; pockets, belts... we facilitate a cloth holder that works as clamp between the Tag and the cloth. To subject the
Tag to it, only to put the plastic of the clamp in the Tag is needed.
The Tag also can be used as keyholder. To do it, only to put a ring in the Tag slot is required.
Both, clothe and car holder are supplied with the FreeT.
Clip
Tag holder for car
dashboards.
be a step ahead with technology and imagination
jcmtechnologies