JDS Labs OL DAC Operating Instructions Manual

Summary of OL DAC

  • Page 2

    J d s l a b s . C o m 2 s e c t i o n 1 q u i c k s e t u p s t e p 0 1 connect ac power adapter to rear power jack (15v), then connect to wall outlet. S t e p 0 2 connect cables to your desired digital audio players (usb and/or toslink), and connect an rca output cable to your amplifier. S t e p 0 ...

  • Page 3

    J d s l a b s . C o m 3 s e c t i o n 2 c o n f i g u r a t i o n c o n n e c t i v i t y ol dac accepts two methods of digital input: usb 6/44.1k thru 24/96khz toslink 16/8khz thru 24/192khz* maximum rca output voltage is 2.0vrms. *many optical sources are unable to reliably transmit at 192khz..

  • Page 4

    J d s l a b s . C o m 4 l i s t e n i n g t i p s o p e r a t i n g c a r e listen safely to conserve your hearing: www.Hearingloss.Org use gentle force when inserting or removing cables. To ensure an optimal noise floor, always position audio equipment as far away as possible from wireless devices....

  • Page 5: S E T U P

    J d s l a b s . C o m 5 s e c t i o n 3 s e t u p c o m p u t e r s e t u p ol dac requires no drivers in windows, mac os x, or linux. Most operating systems immediately recognize and set the dac as the default playback device. To manually select the playback device in: windows vista/7/8/10 right cl...

  • Page 6: No Sound In One Channel

    J d s l a b s . C o m 6 t r o u b l e s h o o t i n g usb device unable to initialize cause: bad usb cable or incorrect drivers solution: try another usb cable or refer to jdslabs.Com/troubleshooting p o w e r a d a p t e r s attention: incorrect power adapters can result in capacitor explosion haza...

  • Page 7

    J d s l a b s . C o m 7 application for council directives 2004/108/ec, 2006/95/ec, 2002/95/ ec.Conformity declared for en55022:2011, en611000-3-2, en61000-3- 3, en55024-2 this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc ...