JDS Labs OL DAC Operating Instructions Manual - No Sound In One Channel
of
7
J D S L A B S . C O M
6
T R O U B L E S H O O T I N G
USB device unable to initialize
Cause: Bad USB cable or incorrect drivers
Solution: Try another USB cable or refer to jdslabs.com/troubleshooting
P O W E R A D A P T E R S
ATTENTION: Incorrect power adapters can result in capacitor
explosion hazards and device damage. Only use the power
adapter included with your EL DAC:
Type: AC-to-AC Transformer
Output Voltage: 15 VAC
Current: Minimum 1500mA
Connector: 2.1x55.mm (ID x OD)
No sound in one channel
Cause: Bad cable, or incorrect computer settings
Solution: Check balance settings; try another headphone or RCA cable.
Some Mac OS X systems will pan audio to the Left channel upon initial
connection of a DAC. User must restore balance to center.