Jeanneau SUN ODYSSEY 42 DS Owner's Manual - Electric Systems
99/132
OPERATION
The electrical switchboard does not require any routine maintenance
.
In case an electric appliance is not energized, check:
- The main power supply (batteries, battery switches).
- The switches and circuit breakers on the line.
- the relevant electrical unit.
You can use the automatic reset switch to read the fuel gauge (to avoid electrolytic problems).
PRECAUTION
Never leave the boat unattended when the electric fitting is on (except the safety equipments directly
connected to the battery and protected by a circuit breaker).
Disconnect the 230 V before you open the electric panel or cupboard.
WARNING
Never work on a live electric fitting.
PRECAUTION
- Never modify an electric fitting and relevant diagrams yourself.
- Call in a technician skilled in marine electricity to carry out any electric modification.
- Never change the breaking capacity (amperage) of the overcurrent safety devices.
- Never install or replace the electric appliances (or any electric equipement) by components
exceeding the capacity (amperage) of the circuit (Watt for bulbs).
8