Jeanneau SUN ODYSSEY 45DS Owner's Manual - Electrical Equipment
101/142
ELECTRICAL PANEL
The electrical switchboard does not require any routine maintenance
.
In case an electric appliance is not energized, check:
- The main power supply (batteries, battery switches).
- The switches and circuit breakers on the line.
- the relevant electrical unit.
You can use the automatic reset switch to read the fuel gauge (to avoid electrolytic problems).
ADVICE - RECOMMENDATION
In order to reduce the risks of electic shock and fire:
- Before you plug in or unplug the boat/shore supply cable, switch off the shut off device
connected to the shore supply.
- Plug in the boat/shore supply cable in the boat before you plug it into the shore supply
socket.
- Unplug the boat/shore supply cable on shore first. Close the shore socket cover.
- Do not modify the connections of the boat/shore supply cable.
WARNING
- Never work on a live electric fitting.
PRECAUTION
- Never leave the boat unattended when the electric fitting is on (except the safety
equipments directly connected to the battery and protected by a circuit breaker).
- Disconnect the 230 V before you open the electric panel or cupboard.
PRECAUTION
- Never modify an electric fitting and relevant diagrams yourself.
- Call in a technician skilled in marine electricity to carry out any electric modification.
- Never change the breaking capacity (amperage) of the overcurrent safety devices.
- Never install or replace the electric appliances (or any electric equipement) by
components exceeding the capacity (amperage) of the circuit (Watt for bulbs).
10