JedMark Acorn Ltl-5210M User Manual - page 13
Advanced Settings
- 12 -
Time Lapse
Off, On
If set On, the camera will automatically
take photos/videos at the set interval
(Note: in this mode, the PIR sensor is
disabled). This is helpful when
observing cold-blooded animals like
snakes, or the process of flowering, etc.
This feature can work together with
Timer feature.
Side PIR
On, Off
The default setting is On. The two side
prep PIR sensors provide wider sensing
angle and enhance response time.
(Reference 2.5 Advantages of Prep
Sensors.) However, in some situations
you have difficulty removing the
interfering branches, or avoiding the
sunlight. If so, you have the option to
turn off the side sensors.
MMS Phone No.
Enter
Press Enter to input the phone number
you want to send MMS to. To input
more phone numbers, or to set up email
accounts, reference 3.4 Set up MMS
Function on PC.
In the submenu, you can set the daily
number of pictures sent via MMS. 0
stands for Unlimited. 1-99/Day gives
you flexibility sending up to 99 pictures
per day
MMS Status
Off, VGA, QVGA
The default setting is Off, which turns
the MMS function off. To turn it on,
choose either VGA=640x480 or
QVGA=320x240, which defines the
resolution size of the MMS picture. If
the original picture’s size too large, its
MMS picture will be converted to
QVGA format to save transmission time
and power consumption.
Default Set
Press OK Enter to return all your
camera settings back to the manufacturer
default. However, all the MMS function
settings will remain except for MMS
Phone No. and MMS Status.
http://www.jedmark.co.uk