1. DL manuals
  2. Jeep
  3. Automobile
  4. 2010 Patriot
  5. Owner's Manual

Jeep 2010 Patriot Owner's Manual

Other manuals for 2010 Patriot: User Manual, Owner's Manual, User Manual

Summary of 2010 Patriot

  • Page 1

    Patriot o w n e r ’ s m a n u a l 2 0 1 0

  • Page 2: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 3 understanding the featu...

  • Page 4: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 rollover warning . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 5 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 7 䡵 vehicle ide...

  • Page 5

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This owner’s manual has been prepared with the assis- tance of service and ...

  • Page 6

    Control. Failure to operate this vehicle safely may result in an accident, rollover of the vehicle, and severe or fatal injury. Drive carefully. Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal u...

  • Page 7

    6 introduction.

  • Page 8

    Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in an accident or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...

  • Page 9

    Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 8 introduction.

  • Page 10: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 12 ▫ ignition key removal . . . . . . . . . . . . . . . . . . 12 ▫ locking doors with a key . . . . . . . . . . . . . . 14 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . 14 䡵 sen...

  • Page 11

    ▫ sound horn with remote key lock . . . . . . . . 21 ▫ flash lights with remote key lock/unlock . . 22 ▫ using the panic alarm . . . . . . . . . . . . . . . . . 22 ▫ programming additional transmitters . . . . . . 23 ▫ general information . . . . . . . . . . . . . . . . . . . 23 ▫ transmitter batter...

  • Page 12

    ▫ seat belt pretensioners — if equipped . . . . . . 49 ▫ supplemental active head restraints (ahr) . . 49 ▫ enhanced seat belt use reminder system (beltalert 威 ) . . . . . . . . . . . . . . . . . . . . . . . . . 53 ▫ seat belt extender . . . . . . . . . . . . . . . . . . . . . 55 ▫ seat belts and pr...

  • Page 13

    A word about your keys the authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition key removal 1. Place the shift lever in...

  • Page 14

    Note: if you try to remove the key before you place the shift lever in park, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ...

  • Page 15

    Caution! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Locking doors with a key you can insert the key with either side up. To lock the door, turn the key to the right. To unlock the door, turn the key...

  • Page 16

    Seconds for a bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the vehicle security light begins to flash after the bulb check, it indicates that someone used an invalid key to try to start the engine. Either of thes...

  • Page 17

    Dealer or by following the customer key programming procedure. This procedure consists of programming a blank key to the vehicle electronics. A blank key is one that has never been programmed. Note: when having the sentry key 威 immobilizer system serviced, bring all vehicle keys with you to an autho...

  • Page 18

    The new sentry key 威 is programmed. The remote keyless entry (rke) transmitter will also be pro- grammed during this procedure. Repeat this procedure to program up to eight keys. If you do not have a programmed sentry key 威 , contact your authorized dealer for details. Note: if a programmed key is l...

  • Page 19

    To set the security alarm 1. Remove the key from the ignition switch and get out of the vehicle. 2. Lock the door using either the power door lock switch or the remote keyless entry (rke) transmitter and close all doors. 3. The vehicle security light in the instrument cluster will flash rapidly for ...

  • Page 20

    Note: the line of transmission must not be blocked with metal objects. To unlock the doors and liftgate press and release the unlock button on the rke transmitter once to unlock the driver’s door, or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to ack...

  • Page 21

    2. Release both buttons at the same time. 3. Test the feature while outside of the vehicle by press- ing the lock/unlock buttons on the rke transmitter with the ignition switch in the lock position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting....

  • Page 22

    Sound horn with remote key lock this feature will cause the horn to chirp when the doors are locked with the rke transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • for vehicles equipped with the evic, refer to “elec- tronic vehicle informat...

  • Page 23

    Flash lights with remote key lock/unlock this feature will cause the turn signal lights to flash when the doors are locked or unlocked with the rke transmit- ter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • for vehicles equipped with the evic, re...

  • Page 24

    The panic alarm will stay on for three minutes unless you turn it off by pressing the panic button a second time or if the vehicle speed is 5 mph (8 km/h) or greater. Note: when you turn off the panic alarm by pressing the panic button a second time, you may have to be closer to the vehicle due to t...

  • Page 25

    Transmitter battery replacement note: perchlorate material – special handling may apply. See “www.Dtsc.Ca.Gov/hazardouswaste/perchlorate.” the recommended replacement battery is cr2032. 1. If the rke transmitter is equipped with a screw, remove the screw. With the rke transmitter buttons facing down...

  • Page 26

    Note: if the rke transmitter is equipped with a screw, reinstall and tighten the screw until snug. Remote starting system — if equipped this system uses the remote keyless entry (rke) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security. The system...

  • Page 27

    To enter remote start press and release the remote start button on the rke transmitter twice, within five sec- onds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the remote start mode for a 15-minute cycle. No...

  • Page 28

    To exit remote start mode and drive the vehicle before the end of the 15-minute cycle, press and release the unlock button on the rke transmitter to unlock the doors and disarm the vehicle security alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the on posit...

  • Page 29

    Warning! (continued) • when leaving the vehicle, always remove the key from the ignition lock and lock your vehicle. Do not leave unattended children in the vehicle or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe per- sonal injuries and death. Caution! A...

  • Page 30

    Automatic door locks — if equipped the doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The auto lock feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 1...

  • Page 31

    3. Within 30 seconds, press the power door lock switch to lock the doors. 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. Note: • if you do not hear the chime it means that the system did not enter t...

  • Page 32

    • for vehicles not equipped with the evic, perform the following procedure: 1. Close all doors and place the key in the ignition. 2. Within 15 seconds, cycle the ignition switch between lock and on and then back to lock four times ending up in the lock position (do not start the engine). 3. Within 3...

  • Page 33

    3. Repeat steps 1 and 2 for the opposite rear door. Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Child-protection door lock location child-protection door lock function 32 thi...

  • Page 34

    Note: for emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the door with the outside door handle. Power windows — if equipped power window switches the window controls on the driver’s door trim panel control all the door windows. The...

  • Page 35

    Auto-down the driver’s door window switch has an auto-down feature. Push the window switch past the first detent, release, and the window will go down automatically. To cancel the auto-down movement, operate the switch in either the up or down direction and release the switch. Window lockout switch ...

  • Page 36

    Liftgate note: the key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn to the right (manual lock models only). The liftgate can also be unlocked using the remote keyless entry (rke) transm...

  • Page 37

    • although the liftgate has no inside release mechanism, the liftgate trim panel includes an opening with a snap-in cap that provides access to release the latch in the event of an electrical system malfunction. Warning! • driving with the liftgate open can allow poison- ous exhaust gases into your ...

  • Page 38

    • supplemental side airbag inflatable curtains (sabic) for the driver and passengers seated next to a window • supplemental seat-mounted side airbags — if equipped • an energy-absorbing steering column and steering wheel • knee bolsters/blockers for front seat occupants • front seat belts incorporat...

  • Page 39

    Warning! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly. Buckl...

  • Page 40

    Warning! • it is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure ever...

  • Page 41

    2. The seat belt latch plate is along side the pillar near the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buc...

  • Page 42

    Warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • a belt that is too loose will not protect you properly. In a sudden stop...

  • Page 43

    4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. War...

  • Page 44

    6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. Warning! A frayed or torn belt could rip apart in a collision and leave you with no protecti...

  • Page 45

    As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage, try to move it down to make sure that it is locked in position. In the rear seat, move toward the center of the seat to ...

  • Page 46

    2. Grasp the mini-latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. 4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in the seat. Slide the regular latch pl...

  • Page 47

    6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, pull on the lap ...

  • Page 48

    9. To release the belt, push the red button on the buckle. 10. To disengage the mini-latch from the mini-buckle for storage, insert the regular latch plate into the black button on the top of the mini-buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch p...

  • Page 49

    Automatic locking retractors (alr) mode — if equipped in this mode, the shoulder belt is automatically pre- locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is avail- able on all passenger-seating positions with a combina- tion lap/shoulder bel...

  • Page 50

    Warning! • the belt and retractor assembly must be replaced if the seat belt assembly automatic locking re- tractor (alr) feature or any other seat belt func- tion is not working properly when checked ac- cording to the procedures in the service manual. • failure to replace the belt and retractor as...

  • Page 51

    How the active head restraints (ahr) work the occupant restraint controller (orc) determines whether the severity, or type of rear impact will require the active head restraints (ahr) to deploy. If a rear impact requires deployment, both the driver and front passenger seat ahrs will be deployed. Whe...

  • Page 52

    Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. Note: for more information on properly adjusting and positi...

  • Page 53

    3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 4. The ahr front soft foam and trim half should lock into the back decorative plastic half. 1 — downward movement 2 — rearward movement 3 — final downward movement to engage locking mecha- nism 52 t...

  • Page 54

    Note: • if you have difficulties or problems resetting the active head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an authorized dealer. Enhanced seat belt use reminder system (beltalert 姞 ) if the driver’s seat bel...

  • Page 55

    Note: the following steps must occur within the first 60 seconds of the ignition switch being turned to the on or start position. Chrysler group llc does not recom- mend deactivating beltalert 威 . 1. Turn the ignition switch to the lock position and buckle the driver’s seat belt. 2. Turn the ignitio...

  • Page 56

    Seat belt extender if a seat belt is too short, even when fully extended, and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender. This extender should be used only if the existing belt is not lon...

  • Page 57

    Supplemental restraint system (srs) - airbags this vehicle has advanced front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s advanced front air- bag is mounted in the center of the steering wheel. The passenger’s advanced front airbag...

  • Page 58

    This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the advanced front airbags based upon seat position. This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the dr...

  • Page 59

    • front and side impact sensors • front seat belt pretensioners, seat belt buckle switch, and seat track position sensors • supplemental active head restraint for driver and front passenger advanced front airbag features the advanced front airbag system has multistage driver and front passenger airb...

  • Page 60

    Supplemental seat-mounted side airbags (sab) — if equipped supplemental seat-mounted side airbags provide en- hanced protection to help protect an occupant during a side impact. The supplemental seat-mounted side air- bag is marked with an airbag label sewn into the out- board side of the front seat...

  • Page 61

    Supplemental side airbag inflatable curtain (sabic) sabic airbags may offer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each airbag features inflated chambers placed adjacent to the head of each outboard oc...

  • Page 62

    The system includes side impact sensors adjacent to both front and rear seat occupants that are calibrated to deploy the sabic airbags during impacts that require airbag occupant protection. Warning! • if your vehicle is equipped with left and right supplemental side airbag inflatable curtain (sabic...

  • Page 63

    Warning! Infants in rear facing child restraints should never ride in the front seat of a vehicle with a passenger advanced front airbag. An airbag deployment can cause severe injury or death to infants in that posi- tion. Children that are not big enough to wear the vehicle seat belt properly (see ...

  • Page 64

    5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the customer center. Phone numbers are provided under ⴖ if you need assistance ⴖ . Warning! • relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with y...

  • Page 65

    Airbag deployment sensors and controls occupant restraint controller (orc) the orc is part of a federally regulated safety system required for this vehicle. The orc determines if deployment of the front and/or side airbags in a frontal or side collision is required. Based on the impact sensors signa...

  • Page 66

    The orc monitors the readiness of the electronic parts of the airbag system whenever the ignition switch is in the start or on position. If the key is in the off position, in the acc position, or not in the ignition, the airbag system is not on and the airbags will not inflate. The orc contains a ba...

  • Page 67

    Generated to inflate the advanced front airbags. Differ- ent airbag inflation rates are possible, based on the collision type and severity. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the airbags inflate to their full size. T...

  • Page 68

    Type of collision. In these events, the orc will deploy the sabic only on the impact side of the vehicle. A quantity of non-toxic gas is generated to inflate the side curtain airbag. The inflating side curtain airbag pushes the outside edge of the headliner out of the way and covers the window. The ...

  • Page 69

    • turn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • unlock the doors automatically. If a deployment occurs the front airbags are designed to deflate immediately after deployment. Note: front and/or side airbags will not deploy in al...

  • Page 70

    Warning! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and the front passenger seat belt retractor assembly replaced by an authorized dealer as soon as possible. Also, have the occupant restraint controller system ser...

  • Page 71

    Warning! (continued) • do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. Take your vehicle to an autho- rized dealer for any advanced airbag system ser- vice. If your seat including your t...

  • Page 72

    Note: if the speedometer, tachometer, or any engine related gauges are not working, the occupant restraint controller (orc) may also be disabled. The airbags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of th...

  • Page 73

    In the event that an investigation is undertaken by chrysler group llc (regardless of initiative), the com- pany or its designated representative will first obtain permission of the appropriate custodial entity for the vehicle (usually the vehicle owner or lessee) before accessing the electronic dat...

  • Page 74

    • pedal position • and other parameters depending on vehicle configuration child restraints everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the united states and all canadian provinces require that small children ride in proper restraint sy...

  • Page 75

    • safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing infant carriers and convertible child seats. Both types of child restraints are held in the ve...

  • Page 76

    Cannot sit with knees bent over the vehicle’s cushion while the child’s back is against the seatback; they should use a belt positioning booster seat. The child and booster seat are held in the vehicle by the lap/ shoulder belt. Note: for additional information, refer to www.Seatcheck.Org or call 1–...

  • Page 77

    • carefully follow the instructions that come with the restraint. If you install the restraint improperly, it may not work when you need it. Installing child restraints using the vehicle seat belt the seat belts in the passenger seating positions are equipped with either an automatic locking retract...

  • Page 78

    From the buckle and twist the short buckle end of the belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out. • if the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the ...

  • Page 79

    Child seats such that two seats share a common lower anchorage. If you are installing latch-compatible child restraints in adjacent rear seating positions, you can use the latch anchors or the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center posit...

  • Page 80

    Provide add-on tether strap kits for some of their older products. Tether anchorage kits are also available for most older vehicles. Because the lower anchorages are to be introduced to passenger carrying vehicles over a period of years, child restraint systems having attachments for those anchor- a...

  • Page 81

    In general, you will first loosen the adjusters on the lower and tether straps so that you can attach the hook or connector to the lower and tether anchorages more easily. The tether strap should be routed over the center of the head restraint and attached to the tether anchor on the rear of the sea...

  • Page 82

    Transporting pets airbags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat...

  • Page 83

    Warning! • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- o...

  • Page 84

    If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control blower switch is set at high speed. Do not use the recirculation mode. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exha...

  • Page 85

    Defroster check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor mat safety information always use floor mats designed ...

  • Page 86

    Warning! (continued) • check mounting of mats on a regular basis. Al- ways properly reinstall and secure floor mats that have been removed for cleaning. • always make sure that objects cannot fall into the driver foot well while the vehicle is moving. Objects can become trapped under the brake pedal...

  • Page 87

    Fluid leaks check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately. 86 things to know before...

  • Page 88: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 ▫ inside day/night mirror . . . . . . . . . . . . . . . . 91 ▫ automatic dimming mirror — if equipped . . . 92 ▫ power mirrors . . . . . . . . . . . . . . . . . . . . . . . 93...

  • Page 89

    䡵 voice command — if equipped . . . . . . . . . . . 124 ▫ voice command system operation . . . . . . . . 124 ▫ commands . . . . . . . . . . . . . . . . . . . . . . . . 126 ▫ voice training . . . . . . . . . . . . . . . . . . . . . . 129 䡵 seats . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 90

    ▫ instrument panel dimming . . . . . . . . . . . . . 146 ▫ map/reading lights . . . . . . . . . . . . . . . . . . 147 䡵 windshield wipers and washers . . . . . . . . . . 148 ▫ windshield wiper operation . . . . . . . . . . . . 148 ▫ intermittent wiper system . . . . . . . . . . . . . . 149 ▫ windshi...

  • Page 91

    ▫ closing the sunroof . . . . . . . . . . . . . . . . . . 163 ▫ pinch protect feature . . . . . . . . . . . . . . . . . 163 ▫ pinch protect override . . . . . . . . . . . . . . . . 164 ▫ venting sunroof — express . . . . . . . . . . . . . 164 ▫ sunshade operation . . . . . . . . . . . . . . . . . . ...

  • Page 92

    Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicl...

  • Page 93

    Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated. Ca...

  • Page 94

    Power mirrors the power mirror controls are located on the driver’s door trim panel. To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When you are finished adjusting the mirror, turn the...

  • Page 95

    Outside mirror — driver side adjust the flat outside mirror to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. Outside mirror — passenger side adjust the convex outside mirror to center on the adja- cent lane of traffic with a slight overlap of...

  • Page 96

    Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distan...

  • Page 97

    Vanity mirrors — if equipped to use the mirror, pull the sun visor down and rotate the mirror cover upward. Sun visor sliding feature the sun visors may be pulled out to provide extended coverage of the side glass. Uconnect™ phone — if equipped uconnect™ phone is a voice-activated, hands-free, in- v...

  • Page 98

    • www.Jeep.Com/uconnect • or call 1–877–855–8400 uconnect™ phone allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The uconnect™ phone is driven through your bluetooth 威 ...

  • Page 99

    Voice command button actual button location may vary with the ra- dio. The individual buttons are described in the “operation” section. The uconnect™ phone can be used with any hands-free profile certified bluetooth 威 cellular phone. See the uconnect™ website for supported phones. If your cellu- lar...

  • Page 100

    • for each feature explanation in this section, only the combined form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the combined form voice com- mand ⬙ phonebook new entry, ⬙ or you can ...

  • Page 101

    The following are general phone to uconnect™ phone pairing instructions: • press the button to begin. • after the ⬙ ready ⬙ prompt and the following beep, say ⬙ setup phone pairing. ⬙ • when prompted, after the beep, say ⬙ pair a phone ⬙ and follow the audible prompts. • you will be asked to say a f...

  • Page 102

    • the system will prompt you to say the number you want to call. • for example, you can say ⬙ 234-567-8901 ⬙ . • the uconnect™ phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by saying a name • press the button to begin. • after the ⬙ ...

  • Page 103

    • when prompted, enter the number designation (e.G., ⬙ home, ⬙ ⬙ work, ⬙ ⬙ mobile, ⬙ or ⬙ pager ⬙ ). This will allow you to store multiple numbers for each phonebook entry, if desired. • when prompted, recite the phone number for the phonebook entry that you are adding. After you are finished adding...

  • Page 104

    • depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the previous downloaded phonebook is available for use. • only the phonebook of the currently connected cellu- lar phone is accessible. • ...

  • Page 105

    First disconnect or drop the bluetooth 威 connection to the uconnect™ phone, and then send the address book entry via bluetooth 威 . Please see your phone owner’s manual for specific instructions on how to drop the bluetooth 威 connection. • if the phonebook entry is longer than 24 characters, it will ...

  • Page 106

    Delete uconnect™ phonebook entry note: editing phonebook entries is recommended when the vehicle is not in motion. • press the button to begin. • after the ⬙ ready ⬙ prompt and the following beep, say ⬙ phonebook delete. ⬙ • after you enter the phonebook delete menu, you will then be asked for the n...

  • Page 107

    • note that only the phonebook in the current language is deleted. • automatic downloaded phonebook entries cannot be deleted or edited. List all names in the uconnect™ phonebook • press the button to begin. • after the ⬙ ready ⬙ prompt and the following beep, say ⬙ phonebook list names. ⬙ • the uco...

  • Page 108

    Call, press and hold the button until you hear a single beep, indicating that the incoming call was rejected. Answer or reject an incoming call - call currently in progress if a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting th...

  • Page 109

    Conference call when two calls are in progress (one active and one on hold), press and hold the button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-way calling to initiate three-way calling, press the button while a call is in progress, ...

  • Page 110

    • after the ignition key is switched to off, a call can continue on the uconnect™ phone either until the call ends, or until the vehicle battery condition dictates cessation of the call on the uconnect™ phone and transfer of the call to the cellular phone. • after the ignition key is switched to off...

  • Page 111

    If the phone is not reachable and the uconnect™ phone is operational, you may reach the emergency number as follows: • press the button to begin. • after the ⬙ ready ⬙ prompt and the following beep, say ⬙ emergency ⬙ and the uconnect™ phone will instruct the paired cellular phone to call the emergen...

  • Page 112

    • after the ⬙ ready ⬙ prompt and the following beep, say ⬙ towing assistance. ⬙ note: • the towing assistance number dialed is based on the country where the vehicle is purchased (1-800-528- 2069 for the u.S., 1-877-213-4525 for canada, 55-14- 3454 for mexico city and 1-800-712-3040 for outside mexi...

  • Page 113

    On your cellular phone keypad, you can press the button and say the sequence you wish to enter, followed by the word ⬙ send. ⬙ for example, if required to enter your pin followed with a pound, (3 7 4 6 #), you can press the button and say, ⬙ 3 7 4 6 # send. ⬙ saying a number, or sequence of numbers,...

  • Page 114

    • press the button to begin. • after the ⬙ ready ⬙ prompt and the following beep, say ⬙ setup confirmations. ⬙ the uconnect™ phone will play the current confirmation prompt status and you will be given the choice to change it. Phone and network status indicators if available on the radio and/or on a...

  • Page 115

    • following the beep, say ⬙ mute. ⬙ in order to un-mute the uconnect™ phone: • press the button. • following the beep, say ⬙ mute off. ⬙ advanced phone connectivity transfer call to and from cellular phone the uconnect™ phone allows ongoing calls to be trans- ferred from your cellular phone to the u...

  • Page 116

    The lowest priority. To “select” or “delete” a paired phone being announced, press the button and say “select” or “delete.” also, see the next two sec- tions for an alternate way to “select” or “delete” a paired phone. Select another cellular phone this feature allows you to select and start using a...

  • Page 117

    Things you should know about your uconnect™ phone uconnect™ phone tutorial to hear a brief tutorial of the system features, press the button and say “uconnect™ tutorial.” voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers, the uconnect™ pho...

  • Page 118

    • speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. • make sure that no one other than you is speaking during a voice command period. • performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low roa...

  • Page 119

    • in a convertible vehicle, system performance may be compromised with the convertible top down. Phone far end audio performance • audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry w...

  • Page 120

    3 understanding the features of your vehicle 119.

  • Page 121

    120 understanding the features of your vehicle.

  • Page 122

    3 understanding the features of your vehicle 121.

  • Page 123

    Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home 122 unders...

  • Page 124

    Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...

  • Page 125

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 126

    Note: if you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the voice command button, listen for the beep, and say your command. Pressing the voice command button while the system i...

  • Page 127

    Commands the voice command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the volume 1. Start a dialogue by pressing the voice command button. 2. Say a command (e.G., “help”). 3. Us...

  • Page 128

    Radio fm to switch to the fm band, say “fm” or “radio fm”. In this mode, you may say the following commands: • “frequency” (to change the frequency) • “next station” (to select the next station) • “previous station” (to select the previous station) • “radio menu” (to switch to the radio menu) • “mai...

  • Page 129

    Memo to switch to the voice recorder mode, say “memo”. In this mode, you may say the following commands: • “new memo” (to record a new memo) — during the recording, you may press the voice command button to stop recording. You proceed by saying one of the following commands: − “save” (to save the me...

  • Page 130

    Note: keep in mind that you have to press the voice command button first and wait for the beep before speaking the “barge in” commands. Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers the uconnect™ voice “voice training” feature may be u...

  • Page 131

    Front seat adjustment the adjusting bar is at the front of the seats, near the floor. Pull the bar upward to move the seat forward or rearward. Release the bar once the seat is in the position desired. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjuster...

  • Page 132

    Manual seat height adjustment — if equipped the driver’s seat height can be raised or lowered by using the handle on the outboard side of the seat to adjust the driving position. Manual lumbar — if equipped the lumbar adjustment handle is located on the outboard side of the driver’s seat. To increas...

  • Page 133

    Driver’s seatback recline to recline the seatback, lean forward before lifting the handle, then lean back to the desired position and release the handle. Lift the handle to return the seatback to an upright position. Warning! Do not ride with the seatback reclined so that the shoulder belt is no lon...

  • Page 134

    Six-way power seats — if equipped the power seat switch is located on the outboard side of the seat near the floor. Use the switch to move the seat up, down, forward, rearward, or to tilt the seat. Warning! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat co...

  • Page 135

    Heated seats — if equipped this feature heats the front driver and passenger seats. The heaters provide the same heat level for both the seat cushion and the seatback. The controls for the front heated seats are located on the center instrument panel area. After turning the ignition on, you can choo...

  • Page 136

    Warning! (continued) • do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. Caution! Repeated...

  • Page 137

    Adjusting active head restraints active head restraints can reduce the risk of injury in the event of a rear impact. The active head restraint should be adjusted so the top of the head restraint is located above the top of your ear. To raise the head restraint, pull upward on the head restraint (on ...

  • Page 138

    For comfort the active head restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. Push button activ...

  • Page 139

    Note: • the head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. • in the event of deployment of an active head re- straint, refer to “occupant restraints/resetting active head re...

  • Page 140

    Warning! (continued) • do not place items over the top of the active head restraint, such as coats, seat covers or portable dvd players. These items may interfere with the operation of the active head restraint in the event of an accident and could result in serious injury or death. • active head re...

  • Page 141

    To raise the seatback, pull the strap forward and lift the seatback into its upright position. Warning! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers...

  • Page 142

    Warning! • do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only with the vehicle is parked. • it is extremely dangerous to ride in a...

  • Page 143

    Lift the hood prop rod, clipped to the right side (left side facing hood) of the engine compartment, to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. Caution! To prevent possible damage, do not slam the hood to close it. Lower the hood...

  • Page 144

    Lights multifunction lever the multifunction lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and the fog lights. The multifunction lever is located on the left side of the ste...

  • Page 145

    Lights-on reminder if the headlights or parking lights are left on after the ignition is turned off, a chime will sound to alert the driver when the driver’s door is opened. Fog lights — if equipped the front fog light switch is on the multifunction lever. To activate the front fog lights, turn on t...

  • Page 146

    Daytime running lights — if equipped the high beam lights will come on as daytime running lights (drl) at drl intensity (lower), whenever the ignition is on, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any position e...

  • Page 147

    Lane change assist tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/low beam switch push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction le...

  • Page 148

    Map/reading lights these lights are mounted between the sun visors above the rear view mirror. Each light is turned on by pressing the button. Press the button a second time to turn the light off. The lights also come on when a door is opened or the dimmer control is turned fully upward, past the se...

  • Page 149

    Note: the lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. They will not turn off automatically. Windshield wipers and washers the windshield wiper/washer control lever is located on the right side of the steering colum...

  • Page 150

    Intermittent wiper system use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever. Rotate the end of the lever upward (clockwise) to decrease the delay time and downwar...

  • Page 151

    Warning! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use. Mist feature push...

  • Page 152

    Caution! In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted. Tilt steering colum...

  • Page 153

    Warning! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle. Failure to follow this war...

  • Page 154

    System can be reactivated by pushing the electronic speed control on/off button and resetting the desired vehicle set speed. To activate push the on/off button. The cruise indicator in the instrument cluster will illuminate. To turn the system off, push the on/off button a second time. The cruise in...

  • Page 155

    To vary the speed setting when the electronic speed control is set, you can in- crease speed by pushing up and holding the resume accel lever. If the lever is continually held in the resume accel position, the set speed will continue to increase until the lever is released, then the new set speed wi...

  • Page 156

    Warning! Electronic speed control can be dangerous where the system cannot maintain a constant speed. Your ve- hicle could go too fast for the conditions, and you could lose control. An accident could be the result. Do not use electronic speed control in heavy traffic or on roads that are winding, i...

  • Page 157

    The homelink 威 buttons that are located in the headliner or sun visor designate the three different homelink 威 channels. Note: homelink 威 is disabled when the vehicle secu- rity alarm is active. Warning! • your motorized door or gate will open and close while you are training the universal transceiv...

  • Page 158

    Programming homelink 姞 before you begin if you have not trained any of the homelink 威 buttons, erase all channels before you begin training. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. It is recommended that a new battery be placed in the handhe...

  • Page 159

    • after training a homelink 威 channel, if the garage door does not operate with homelink 威 and the ga- rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “programming a rolling code system.” 4. Press and hold the just-trained h...

  • Page 160

    6. Firmly press and release the learn or training button. The name and color of the button may vary by manufacturer. Note: you have 30 seconds in which to initiate the next step after the learn button has been pressed. 7. Return to the vehicle and press the programmed homelink 威 button twice (holdin...

  • Page 161

    If you unplugged the device for training, plug it back in at this time. Then proceed with step 4 under “programming homelink 威 ” earlier in this section. Using homelink 姞 to operate, press and release the programmed homelink 威 button. Activation will now occur for the trained device (i.E., garage do...

  • Page 162

    Troubleshooting tips if you are having trouble programming homelink 威 , here are some of the most common solutions: • replace the battery in the original transmitter. • press the learn button on the garage door opener to complete the training for a rolling code. • did you unplug the device for train...

  • Page 163

    Power sunroof — if equipped the power sunroof switch is located in the reading light. Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. S...

  • Page 164

    Opening the sunroof manual mode to open the sunroof, press and hold the switch rearward to full open. Any release of the switch will stop the movement and the sunroof will remain in a partial open condition until the switch is pushed and held rearward again. Express mode press the switch rearward an...

  • Page 165

    Pinch protect override if a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. This allows the sunroof to move towards the close position. Note: pinch protection is disabled while the switch is pressed. Venting sunroof...

  • Page 166

    Ignition off operation the sunroof will also operate up to 45 seconds after the ignition has been turned off. The sunroof operation will be canceled if either of the front doors are opened during the 45 second time period. Electrical power outlets there is a standard 12 volt (13 amp) power outlet lo...

  • Page 167

    Note: • to ensure proper operation a mopar 威 knob and element must be used. • do not exceed the maximum power of 160 watts (13 amps) at 12 volts. If the 160 watt (13 amp) power rating is exceeded the fuse protecting the system will need to be replaced. Warning! To avoid serious injury or death: • on...

  • Page 168

    Power inverter — if equipped a 115 volt (150 watt) ac power inverter is located on the front of the center console for added convenience. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 watts. Certain high-end video games, such as playstation3...

  • Page 169

    Warning! To avoid serious injury or death: • do not use a three-prong adaptor. • do not insert any objects into the receptacles. • do not touch with wet hands. • close the lid when not in use. • if this outlet is mishandled, it may cause an electric shock and failure. Caution! • many accessories tha...

  • Page 170

    Cupholders your vehicle is equipped with four cupholders. There are two illuminated cupholders located in the front. There are two cupholders located in the back for the rear passengers. Illuminated front cupholders rear cupholders 3 understanding the features of your vehicle 169.

  • Page 171

    Storage glove compartment and storage bin located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. To open the lower glove compartment, pull outward on the release handle. 1 — upper storage bin 2 — lower glove compartment glove compartment 170 und...

  • Page 172

    Door storage the interior door panels are equipped with lower storage areas. Front door storage rear door storage 3 understanding the features of your vehicle 171.

  • Page 173

    Console features the floor console contains both an upper and lower storage compartment. To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open. To open the lower storage compartment, lift upward on the lower handle to unlatch the lower ...

  • Page 174

    Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injur...

  • Page 175

    To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Cargo cover the cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat. To install the cargo cover, insert either end ...

  • Page 176

    Using the handle, pull the cover toward you and guide the rear cover posts into the guides located on both sides of the rear trim panel. Warning! In an accident a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store...

  • Page 177

    Removable load floor the cargo area load floor is removable and can be washed with mild soap and water. Cargo tie-down loops there are four d-rings installed in the cargo area for securing cargo. Cargo load floor d-rings 176 understanding the features of your vehicle.

  • Page 178

    Warning! • cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • the weight and position of cargo a...

  • Page 179

    Fold down speakers — if equipped when the liftgate is open, the speakers can swing down off the trim panel to face rearward, for tailgating and other activities. Rear window features rear window wiper/washer the rear wiper/washer is controlled by a rotary switch located on the center portion of the ...

  • Page 180

    Rotate the center portion of the lever upward to the first detent position for rear wiper operationa. Note: the rear wiper operates in an intermittent mode only. Rotate the center portion of the lever past the first detent to activate the rear washer. The washer pump will continue to operate as long...

  • Page 181

    Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements....

  • Page 182

    Note: • to help control wind noise when the crossbars are not in use, place the front crossbar in the first detent from the front of the vehicle and the rear crossbar in the second detent from the rear of the vehicle. • if the rear crossbar (or any metallic object) is placed over the satellite radio...

  • Page 183

    Caution! (continued) • travel at reduced speeds and turn corners care- fully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift to a load. This is especially true on large flat loads and may result in damage to ...

  • Page 184: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . 187 䡵 instrument cluster . . . . . . . . . . . . . . . . . . . . 188 䡵 instrument cluster descriptions . . . . . . . . . . . 189 䡵 electronic vehicle information center (evic) — if equipped . . . ....

  • Page 185

    ▫ operation instructions - (disc mode for cd and mp3/wma audio play, dvd-video) . . . 221 ▫ notes on playing mp3/wma files . . . . . . . 223 ▫ list button (disc mode for mp3/wma play) 225 ▫ info button (disc mode for mp3/wma play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 䡵 media...

  • Page 186

    ▫ notes on playing mp3 files . . . . . . . . . . . . 249 ▫ list button (cd mode for mp3 play) . . . . . . 252 ▫ info button (cd mode for mp3 play) . . . . . . 252 ▫ uconnect™ multimedia (satellite radio) — if equipped . . . . . . . . . . . . . . . . . . . . . . . . 253 䡵 universal consumer interface...

  • Page 187

    ▫ operating instructions — video entertainment system (ves)™ (if equipped) . . . . . . . . . . . . . . . . . . . . . . . 267 䡵 remote sound system controls — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 268 ▫ radio operation . . . . . . . . . . . . . . . . . . . . . 268 ▫ cd playe...

  • Page 188

    Instrument panel features 1 — air outlet 5 — storage bin 9 — heated seat switch – if equipped 2 — demisters 6 — glove compartment 10 — hazard warning flasher 3 — instrument cluster 7 — climate controls 11 — esc off switch – if equipped 4 — radio 8 — power outlet 12 — heated seat switch – if equipped...

  • Page 189

    Instrument cluster 188 understanding your instrument panel.

  • Page 190

    Instrument cluster descriptions 1. Fuel gauge/fuel door reminder when the ignition switch is in the on position, the pointer will show the level of fuel remain- ing in the fuel tank. The fuel pump symbol points to the side of the vehicle where the fuel door is located. 2. Charging system light this ...

  • Page 191

    Briefly as a bulb check. If the light does not come on during starting, have the system checked by an autho- rized dealer. 4. Oil pressure warning light this light indicates low engine oil pressure. The light should turn on momentarily when the engine is started. If the light turns on while driving,...

  • Page 192

    To switch the headlights to high beam, and pull toward yourself (normal position) to return to low beam. 10. Anti-lock brake (abs) light — if equipped this light monitors the anti-lock brake system (abs). The light will turn on when the ignition switch is turned to the on position and may stay on fo...

  • Page 193

    13. Engine temperature warning light this light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches h , this indicator will illuminate and a single chime will sound after reaching a set threshold. Further overheating will cause the temperature gauge to pass h ,...

  • Page 194

    The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the brake warning light, which will turn on when the brake fluid level in the master cylinder has dropped below a...

  • Page 195

    The light also will turn on when the parking brake is applied with the ignition switch in the on position. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application. 15. Transmission temperature warning light during sustained high speed driving o...

  • Page 196

    17. Temperature gauge the temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather, up mountain grades, or ...

  • Page 197

    20. Shift lever indicator the shift lever indicator is self-contained within the instrument cluster. It displays the gear position of the automatic transmission. Note: you must apply the brakes before shifting from park. 21. Odometer/trip odometer reset button press this button to change the display...

  • Page 198

    Maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the tpms low tire pressure telltale. Your vehicle has also been equipped with a tpms malfunction indicator to indicate when the system is not operating properly. The tpms malfunction indicato...

  • Page 199

    Note: u.S. Federal regulations require that upon trans- fer of vehicle ownership, the seller certify to the pur- chaser the correct mileage that the vehicle has been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was ...

  • Page 200

    Lo tire when tire pressure is low, the odometer display will toggle between lo and tire for three cycles. Change oil message your vehicle is equipped with an engine oil change indicator system. The “change oil” message will flash in the instrument cluster odometer for approximately 12 seconds after ...

  • Page 201

    The key is in the on/run position before engine start. If the light does not come on when turning the key from off to on/run, have the condition checked promptly. Certain conditions such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the light after engine start. The vehicle ...

  • Page 202

    28. Electronic stability control (esc) off indicator light — if equipped this light indicates the electronic stability con- trol system (esc) has been turned off by the driver. 29. Electronic stability control (esc) activation/ malfunction indicator light — if equipped the “esc activation/malfunctio...

  • Page 203

    Check, when the ignition key is turned to the on position and may stay on for as long as three seconds. When lit solid: there is an 4wd system fault. 4wd performance will be at a reduced level. Service the 4wd system soon. When blinking: the 4wd system is temporarily dis- abled due to overload condi...

  • Page 204

    The evic consists of the following: • system status • vehicle information warning message displays • personal settings (customer-programmable features) • compass heading • outside temperature display • trip computer functions • uconnect™ phone displays (if equipped) • audio mode display • tire press...

  • Page 205

    • right rear turn signal light out (with a single chime) • rke battery low (with a single chime) • personal settings not available – vehicle not in park (automatic transmission) or vehicle is in motion (manual transmission). • left/right front door ajar (one or more, with a single chime if speed is ...

  • Page 206

    1. Turn the ignition switch to the on position. Do not start the engine. 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Turn the ignition switch to the off/lock position. Note: if the indicator message illuminates when you start the vehicle, the oil change indicato...

  • Page 207

    • distance to empty (dte) • elapsed time • tire pressure monitor (tpm) • personal settings to reset the display pressing and holding the evic button once will clear the function currently being displayed. Reset will only occur if a resettable function is currently being displayed. To reset all reset...

  • Page 208

    Determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. This is not resettable. Note: significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the dte displ...

  • Page 209

    Pressing the evic button while in this display selects english, espanol, deutsch, italiano, francais or nl de- pending on availability. As you continue, the displayed information will be shown in the selected language. Note: uconnect™ language will not change using the evic. Please refer to “languag...

  • Page 210

    And hold the evic button when in this display until “on” or “off” appears to make your selection. Sound horn with lock when on is selected, a short horn sound will occur when the rke transmitter lock button is pressed. This feature may be selected with or without the flash lights with lock feature. ...

  • Page 211

    Display units in the evic, odometer, and uconnect™ gps system units can be changed between english and metric. Press and hold the evic button when in this display until “english” or “metric” appears to make your selection. Confirmation of voice commands — if equipped when on is selected, all voice c...

  • Page 212

    Panel. This is where the compass module is located and such devices may interfere and cause false compass readings. To set the variance with the ignition in the on position, quickly (less than one second) press and release the evic button several times until you have displayed the per- sonal setting...

  • Page 213

    Compass calibration if the compass appears erratic or inaccurate, and the variance has been properly set, you may wish to manu- ally recalibrate the compass. To manually calibrate the compass: 1. Start the engine and leave the transmission in the park position. 2. Press and release the evic button (...

  • Page 214

    Operating instructions - radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Press the on/volume control knob a second time to turn off the radio. Electronic volume con...

  • Page 215

    Scan button pressing the scan button causes the tuner to search for the next listenable station in am, fm or satellite (if equipped) frequencies, pausing for five seconds at each listenable station before continuing to the next. To stop the search, press the scan button a second time. Voice command ...

  • Page 216

    5. To exit, press any button/knob or wait five seconds. The clock can also be set by pressing the setup button and selecting the “set home clock” entry. Once in this display follow the above procedure, starting at step 2. Info button press the info button for an rds station (one with call letters di...

  • Page 217

    Push the rotary tune/scroll control knob a fifth time and fade will display. Turn the tune/scroll control knob to the left or right to adjust the sound level between the front and rear speakers. Push the rotary tune/scroll control knob again to exit setting tone, balance, and fade. Music type button...

  • Page 218

    Program type 16-digit character display rhythm and blues r & b religious music rel musc religious talk rel talk rock rock soft soft soft rock soft rck soft rhythm and blues soft r & b sports sports talk talk top 40 top 40 weather weather by pressing the seek button when the music type icon is displa...

  • Page 219

    • disc play/pause - you can toggle between playing the dvd and pausing the dvd by pushing the select button (if equipped). • dvd play options - selecting the dvd play options will display the following: • subtitle – repeatedly pressing select will switch subtitles to different subtitle languages tha...

  • Page 220

    Tune/scroll control knob to adjust the minutes. Press the tune/scroll control knob again to save changes. • player defaults - selecting this item will allow the user to scroll through the following items and set defaults according to customer preference. Menu language — if equipped selecting this it...

  • Page 221

    Aspect ratio — if equipped selecting this item allows you to choose between wide screen, pan scan, and letter box. Autoplay — if equipped when this is set to on and a dvd video is inserted, it will bypass the dvd menu screen and automatically play the movie. In some rare cases, the dvd player may no...

  • Page 222

    Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the stations that you commit to pushbutton memory {12 am, 12 fm, and 12 satellite (if equipped) stations}. Disc button pressing the disc button will allow you to switch from ...

  • Page 223

    Radio display will show ⬙ loading disc ⬙ when the disc is loading and “reading disc” when the radio is reading the disc. Caution! This cd player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the cd player mechanism. Eject button — ejecting compact disc(s) press the...

  • Page 224

    Rw/ff (cd mode) press and hold ff (fast forward) and the cd player will begin to fast forward until ff is released, or rw or another cd button is pressed. The rw (rewind) button works in a similar manner. Am or fm button (cd mode) switches the radio into the am or fm radio mode. Notes on playing mp3...

  • Page 225

    Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal cd audio tracks and computer files (including mp3/ wma files). Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession...

  • Page 226

    Id3 tag information for artist, song title, and album title are supported for id3 version 1 tags. Id3 version 2 is not supported by the radios. Playlist files are not supported. Mp3 pro files are not supported. Playback of mp3/wma files when a medium containing mp3/wma data is loaded, the radio chec...

  • Page 227

    Info button (disc mode for mp3/wma play) pressing the info button repeatedly will scroll through the following tag information: song title, artist, file name, and folder name (if available). Press the info button once more to return to ⬙ elapsed time ⬙ priority mode. Press and hold the info button f...

  • Page 228

    Time button (auxiliary mode) press the time button to change the display from elapsed playing time to time of day. The time of day will display for five seconds. Rw/ff (auxiliary mode) no function. Set button (auxiliary mode) no function. Operating instructions — voice command system (if equipped) f...

  • Page 229

    Macrovision this product incorporates copyright protection technol- ogy that is protected by u.S. Patents and other intellec- tual property rights. Use of this copyright protection technology must be authorized by macrovision, and is intended for home and other limited viewing uses only, unless othe...

  • Page 230

    Clock setting procedure — rbz radio to manually set the clock 1. Turn on the radio. 2. Touch the screen where the time is displayed, the clock setting menu will appear on the screen. 3. To move the hour forward, touch the screen where the word “hour” with the arrow pointing upward is dis- played. To...

  • Page 231

    Show time if radio is off when selected, this feature will display the time of day on the touch screen when the radio is turned off. Proceed as follows to change the current setting: 1. Turn on the radio. 2. Touch the screen where the time is displayed. The clock setting menu will appear on the scre...

  • Page 232

    To manually set the clock — rer/ren 1. Turn on the radio. 2. Touch the screen where the time is displayed. 3. Touch the screen where “user clock” is displayed, the clock setting menu will appear on the screen. 4. To move the hour forward, touch the screen where the word “hour” with the arrow pointin...

  • Page 233

    1. Turn on the radio. 2. Touch the screen where the time is displayed. 3. Touch the screen where “user clock” is displayed, the clock setting menu will appear on the screen. 4. When this feature is on, a check mark will appear in the box next to the words “show time if radio is off.” touch the scree...

  • Page 234

    Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume cont...

  • Page 235

    Time button press the time button to alternate display of the time and radio frequency. Clock setting procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side tune/ scroll control knob. 3. After adjusting the hours, press the right side tune/ s...

  • Page 236

    Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the right or left to increase or decrease the treble tones. Push the rotary tune/scroll control knob a fourth time and balance will display. Turn the tune/ scroll control knob to the r...

  • Page 237

    Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the stations that you commit to pushbutton memory (12 am and 12 fm stations). Disc button pressing the disc button will allow you to switch from am/fm modes to disc modes. Op...

  • Page 238

    Caution! • this cd player will accept 4-3/4 in (12 cm) discs only. The use of other sized discs may damage the cd player mechanism. • do not use adhesive labels. These labels can peel away and jam the player mechanism. • res is a single cd player. Do not attempt to insert a second cd if one is alrea...

  • Page 239

    Rw/ff press and hold the ff (fast forward) button and the cd player will begin to fast forward until ff is released, or rw or another cd button is pressed. The rw (reverse) button works in a similar manner. Am/fm button press the button to select either am or fm mode. Set/rnd button (random play but...

  • Page 240

    • maximum number of files: 255 • maximum number of folders. (the radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a number instead. With a maximum number of files, exc...

  • Page 241

    Mpeg specification sampling frequency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title, and alb...

  • Page 242

    Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack, which allows the user to plug in a portable device, such as an mp3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the dis...

  • Page 243

    Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume cont...

  • Page 244

    Phone button uconnect™ phone — if equipped press this button to operate the uconnect™ phone feature (if equipped). Refer to “uconnect™ phone” in “under- standing the features if your vehicle”. If your vehicle is not equipped with or this feature is not available on your vehicle, a “not equipped with...

  • Page 245

    Info button press the info button for an rds station (one with call letters displayed). The radio will return a radio text message broadcast from an fm station (fm mode only). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the directi...

  • Page 246

    Push the rotary tune/scroll control knob again to exit setting tone, balance, and fade. Music type button pressing this button once will turn on the music type mode for five seconds. Pressing the music type button or turning the tune/scroll control knob within five seconds will allow the program for...

  • Page 247

    Program type 16-digit character display soft soft soft rock soft rck soft rhythm and blues soft r&b sports sports talk talk top 40 top 40 weather weather by pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected mu...

  • Page 248

    Window. Select the button (1–6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the set/ rnd button, the station will continue to play but will not be stored into pushbutton memory. You may add a second station to e...

  • Page 249

    Inserting compact disc(s) gently insert one cd into the cd player with the cd label facing up. The cd will automatically be pulled into the cd player and the cd icon will illuminate on the radio display. If a cd does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and mu...

  • Page 250

    Note: ejecting with the ignition off is not allowed on convertible or soft-top models (if equipped). Seek button press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current selection, or return to the beginning of the previous se...

  • Page 251

    Supported media (disc types) the mp3 file recording media supported by the radio are cdda, cd-r, cd-rw, mp3, and cdda+mp3. Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded...

  • Page 252

    Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 files. Non-mp3 files named with the *.Mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to co...

  • Page 253

    Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading times for playback of mp3 files may be affected by the following: • med...

  • Page 254

    Press and hold the info button again for three seconds to return to ⬙ elapsed time ⬙ display. Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3 player or cassette player and utilize the vehicle’s ...

  • Page 255

    Radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the sirius web site at www.Sirius.Com, or at www- .Siriuscanada.Ca for ...

  • Page 256

    Reception quality satellite reception may be interrupted due to one of the following reasons: • the vehicle is parked in an underground parking structure or under a physical obstacle. • dense tree coverage may interrupt reception in the form of short audio mutes. • driving under wide bridges or alon...

  • Page 257

    Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next channel in the direction of the arrows. Tune control (rotary) turn the rotary tune/scroll control knob clockwise to increase or counterclockwise to decrease the channel. Music type button pressing thi...

  • Page 258

    Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after pressing the set but- ton, the channel will continue to play but will not be stored into pushbutton memory. You may add a second channel to each pushbut...

  • Page 259

    Uci supports mini, 4g, photo, nano, 5g ipod 威 and iphone 威 devices. Some ipod 威 software versions may not fully support the uci features. Please visit apple’s website for software updates. Note: • if the radio has a usb port, connecting an ipod 威 to this port does not play the media. For playing an ...

  • Page 260

    • the ipod 威 can be controlled using the radio buttons to play, browse, and list the ipod 威 contents. • the ipod 威 battery charges when plugged into the uci connector (if supported by the specific ipod 威 device) controlling the ipod 姞 using radio buttons to get into the uci (ipod 威 ) mode and access...

  • Page 261

    • use the seek and seek >> buttons to jump to the previous or next track. If the seek button is pressed during the first two seconds of the track, it will jump to the previous track in the list; pressing this button at any other time in the track, it will jump to the beginning of the track. Pressing...

  • Page 262

    • turning it clockwise (forward) and counterclock- wise (backward) scrolls through the lists, displaying the track detail on the radio display. Once the track to be played is highlighted on the radio display, press the tune control knob to select and start playing the track. Turning the tune control...

  • Page 263

    To go to the desired track in that list. Not all ipod 威 sub-menu levels are available on this system. • music type button: the music type button is another shortcut button to the genre listing on your ipod 威 . Caution! • leaving the ipod 威 (or any supported device) any- where in the vehicle in extre...

  • Page 264

    System activation sirius satellite radio service is pre-activated and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, includi...

  • Page 265

    Next, turn the knob surrounding the joystick in the center of the radio to scroll to subscription, and then press and release the joystick. All of the esns that apply to your vehicle will display. Selecting uconnect™ multimedia (satellite) mode press the sat button until ⬙ sat ⬙ appears in the displ...

  • Page 266

    Seek buttons press and release the seek buttons to search for the next channel in satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without st...

  • Page 267

    Toggle the music type button again to select the music type. By pressing the seek button when the music type function is active, the radio will be tuned to the next channel with the same selected music type name. If a preset button is activated while in the music type (program type) mode, the music ...

  • Page 268

    You may add a second channel to each pushbutton by repeating the above procedure with this exception: press the set button twice and set 2 will show in the display window. Each button can be set for set 1 and set 2. This allows a total of 12 satellite channels to be stored into pushbutton memory. Th...

  • Page 269

    Remote sound system controls — if equipped the remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker type switch with a pushbutton in the center. Pressing the top of the switch will increa...

  • Page 270

    The button located in the center of the left-hand control will tune to the next preset station that you have pro- grammed in the radio preset pushbuttons. Cd player press the top of the switch once to go to the next track on the cd. Press the bottom of the switch once to go to the beginning of the c...

  • Page 271

    Note: if you experience difficulty in playing a particu- lar disc, it may be damaged (i.E., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. Radio operation and cellular p...

  • Page 272

    Blower control rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “o” (off) position. There are four blower speeds. Note: for vehicles equipped with remote start, the climate ...

  • Page 273

    Mode control (air direction) rotate this control to choose from sev- eral patterns of air distribution. You can select either a primary mode as identified by the symbols on the con- trol, or a blend of two of these modes. The closer the setting is to a particular symbol, the more air distribution yo...

  • Page 274

    Defrost air is directed through the windshield and side window demist outlets. Use this mode with maxi- mum blower and temperature settings for best wind- shield and side window defrosting. Note: the air conditioning compressor operates in mix, defrost, or a blend of these modes, even if the air con...

  • Page 275

    Air conditioning control press this button to engage the air conditioning. A light will illuminate when the air conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures while rotating right into the red area indicates warmer tem- peratures....

  • Page 276

    Automatic operation operation of the system is quite simple. 1. Turn the mode control knob (on the right) and the blower control knob (on the left) to auto. Note: the auto position performs best for front seat occupants only. 2. Dial in the temperature you would like the system to maintain by rotati...

  • Page 277

    • if your air conditioning performance seems lower than expected, check the front of the a/c condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduc...

  • Page 278

    4 understanding your instrument panel 277.

  • Page 279

    The operator can override the auto mode setting to change airflow distribution by rotating the mode control knob (on the right) to one of the following positions. • panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. Note: the center in...

  • Page 280

    • air conditioner control press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the mode control dial. Press this but- ton a second time to turn off the air conditionin...

  • Page 281

    Defrost/floor mode. Attempting to use the recircula- tion while in these modes will cause the led in the control button to blink and then turn off. • most of the time, when in automatic operation, you can temporarily put the system into recirculation mode by pressing the recirculation button. Howeve...

  • Page 282

    Vacation storage anytime you store your vehicle, or keep it out of service (i.E., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower settings. This will ensure adequate system lubrication to minimize the possibility of com...

  • Page 283

    A/c air filter — if equipped the a/c filter prevents most dust and pollen from entering the cabin. The filter acts on air coming from outside the vehicle and recirculated air within the pas- senger compartment. Refer to “maintenance procedures” in “maintaining your vehicle” for a/c air filter servic...

  • Page 284

    Control setting suggestions for various weather conditions 4 understanding your instrument panel 283.

  • Page 286: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 290 ▫ manual transmission – if equipped . . . . . . . 290 ▫ automatic transmission – if equipped . . . . . 290 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 291 ▫ extreme cold weather (below ⫺...

  • Page 287

    䡵 autostick 威 — if equipped . . . . . . . . . . . . . . . 299 ▫ operation . . . . . . . . . . . . . . . . . . . . . . . . . 299 ▫ general information . . . . . . . . . . . . . . . . . . 300 䡵 four-wheel drive operation — if equipped . . 300 䡵 driving on slippery surfaces . . . . . . . . . . . . . 30...

  • Page 288

    ▫ brake assist system (bas) . . . . . . . . . . . . . . 322 ▫ traction control system (tcs) . . . . . . . . . . . 323 ▫ electronic roll mitigation (erm) . . . . . . . . . 323 ▫ hill descent control (hdc) – if equipped . . 324 ▫ hill start assist (hsa) – manual transmission or off-road package only ....

  • Page 289

    䡵 tire pressure monitoring system (tpms) . . . . . 351 ▫ base system . . . . . . . . . . . . . . . . . . . . . . . . 354 ▫ premium system – if equipped . . . . . . . . . . 356 ▫ general information . . . . . . . . . . . . . . . . . . 360 䡵 fuel requirements . . . . . . . . . . . . . . . . . . . . . ...

  • Page 290

    䡵 recreational towing (behind motorhome, etc.) . . . . . . . . . . . . . . . . 381 ▫ towing this vehicle behind another vehicle (flat towing with all four wheels on the ground) . . . . . . . . . . . . . . . . . . . . . . . . . . . 381 5 starting and operating 289.

  • Page 291

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ou...

  • Page 292

    Tip start do not press the accelerator. Turn the ignition switch to the start position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage autom...

  • Page 293

    If engine fails to start if the engine fails to start after you have followed the “normal starting” and “extreme cold weather” proce- dures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there. Crank the engine for no more than 15 seconds. This should clear any e...

  • Page 294

    Warning! Remember to disconnect the cord before driving. Damage to the 110-115 volt electrical cord could cause electrocution. Manual transmission — if equipped five–speed manual transmission warning! You or others could be injured if you leave the vehicle unattended without having the parking brake...

  • Page 295

    Use each gear in numerical order, do not skip a gear. Be sure the transmission is in first gear, (not third), when starting from a standing position. Damage to the clutch can result from starting in third gear. For most city driving, you will find it easier to use only the lower gears. For steady hi...

  • Page 296

    Caution! If you skip more than one gear while downshifting or downshift at too high a vehicle speed, you could damage the engine, transmission, or clutch. To maintain a safe speed and prolong brake life, shift down to second or first gear when descending a steep grade. When turning a corner or drivi...

  • Page 297

    Warning! It is dangerous to move the shift lever out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only s...

  • Page 298

    Gear ranges do not race the engine when shifting from park or neutral positions into another gear range. Park this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never use park while the vehicle is in motion. Apply the parking brake when lea...

  • Page 299

    Warning! (continued) • never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the ignition key in the ignition switch. A child could operate power windows, other con...

  • Page 300

    Autostick 姞 — if equipped autostick 威 is a driver-interactive transmission that offers six manual ratio changes to provide you with more control. Autostick 威 allows you to maximize engine brak- ing, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system c...

  • Page 301

    • when heavy anti-lock brake system (abs) applica- tion is detected general information • if a ratio other than first is selected and the vehicle is brought to a stop, the transmission control logic will automatically select the first gear ratio. • if a low range is selected and the engine accelerat...

  • Page 302

    Where one or more wheels have wheel spin or if addi- tional traction is needed in sand, deep snow, or loose traction surfaces, activate the “4wd lock” switch by pulling up once and releasing. This locks the center coupling allowing more torque to be sent to the rear wheels. The “4wd indicator light”...

  • Page 303

    Warning! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow, wet, mud, loose ...

  • Page 304

    Flowing/rising water warning! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicl...

  • Page 305

    Caution! (continued) • driving through standing water may cause dam- age to your vehicle’s drivetrain components. Al- ways inspect your vehicle’s fluids (i.E., engine oil, transmission, axle, etc.) for signs of contamination (i.E., fluid that is milky or foamy in appearance) after driving through st...

  • Page 306

    On-road driving tips utility vehicles have higher ground clearance and a narrower track to make them capable of performing in a wide variety of off-road applications. Specific design characteristics give them a higher center of gravity than ordinary cars. An advantage of the higher ground clearance ...

  • Page 307

    Caution! Never park your vehicle over dry grass or other combustible materials. The heat from your vehicle exhaust system could cause a fire. Warning! Always wear your seat belt and firmly tie down cargo. Unsecured cargo can become projectiles in an off-road situation. When to use low (l off-road) w...

  • Page 308

    Snow in heavy snow or for additional control and traction at slower speeds, activate the 4wd lock and shift the transaxle to low (l off-road) if necessary. Do not shift to a lower gear than necessary to maintain headway. Over- revving the engine can spin the wheels and traction will be lost. If you ...

  • Page 309

    Sand soft sand is very difficult to travel through with full tire pressure. When crossing soft sandy spots in a trail maintain your vehicle’s momentum and do not stop. The key to driving in soft sand is using the appropriate tire pressure, accelerating slowly, avoiding abrupt maneu- vers and maintai...

  • Page 310

    Is on the hill side trail. Is the trail straight up and down? What is on top and the other side? Are there ruts, rocks, branches or other obstacles on the path? Can you safely recover the vehicle if something goes wrong? If every- thing looks good and you feel confident, then you should use low (l o...

  • Page 311

    Controlled descent? Are there obstacles? Is it a straight descent? Is there plenty of distance at the base of the hill to regain control if the vehicle descends to fast? If you feel confident in your ability to proceed then make sure you are in low (l off-road) with the 4wd lock engaged and proceed ...

  • Page 312

    Warning! If the engine stalls or you lose headway or cannot make it to the top of a steep hill or grade, never attempt to turn around. To do so may result in tipping and rolling the vehicle, which may result in severe injury. Always back carefully straight down a hill in reverse gear. Never back dow...

  • Page 313

    Caution! Water ingestion into the transaxle, transfer case, engine or vehicle interior can occur if you drive too fast or through too deep of water. Water can cause permanent damage to engine, driveline or other vehicle components and your brakes will be less effective once wet and/or muddy. Before ...

  • Page 314

    Caution! Muddy waters can reduce the cooling system effec- tiveness by depositing debris onto the radiator. After driving off-road off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road, it is always a good idea to check for damage. That way you can ...

  • Page 315

    Warning! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. You might not have full braking power when you need it to prevent an accident. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary. • if y...

  • Page 316

    Warning! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. Caution! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature an...

  • Page 317

    If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Parking brake before leaving the vehicle, make sure that the parking...

  • Page 318

    Note: • when the parking brake is applied and the automatic transmission is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • this light only shows that ...

  • Page 319

    Caution! If the brake system warning light remains on with the parking brake released, a brake system malfunc- tion is indicated. Have the brake system serviced by an authorized dealer immediately. Brake system your vehicle is equipped with power assisted brakes as standard equipment. In the event p...

  • Page 320

    Warning! Driving a vehicle with the “brake warning light” on is dangerous. A significant decrease in braking per- formance or vehicle stability during braking may occur. It will take you longer to stop the vehicle or will make your vehicle harder to control. You could have an accident. Have the vehi...

  • Page 321

    Warning! (continued) • the capabilities of an abs-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others. The “abs warning light” monitors the abs system. The light will come on when the ignition switch is turned to...

  • Page 322

    You may also experience the following when the brake system goes into anti-lock mode: • the abs motor running (it may continue to run for a short time after the stop) • the clicking sound of solenoid valves • brake pedal pulsations • a slight drop or fall away of the brake pedal at the end of the st...

  • Page 323

    Assist (hsa), and electronic stability control (esc). All systems work together to enhance vehicle stability and control in various driving conditions and are commonly referred to as esc. Anti-lock brake system (abs) this system aids the driver in maintaining vehicle control under adverse braking co...

  • Page 324

    Warning! (continued) • the bas cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplan- ing. Only a safe, attentive, and skillful driver can prevent accidents. • the capabilities of a bas-equipped vehicle must never be exploi...

  • Page 325

    Erm can only reduce the chance of wheel lift occurring during severe or evasive driving maneuvers. It can not prevent wheel lift due to other factors such as road conditions, leaving the roadway or striking objects or other vehicles. Note: anytime the esc system is in the “full off” mode, erm is dis...

  • Page 326

    In “off-road” mode and placing the shift lever in low or reverse. Refer to “safe off-road driving” in “start- ing and operating” for further information. When hdc is properly enabled, the “hill decent control light” in the instrument cluster will be illuminated. Hdc has the capability to sense terra...

  • Page 327

    Hill start assist (hsa) – manual transmission or off-road package only the hsa system is designed to assist the driver when starting a vehicle from a stop on a hill. Hsa will maintain the level of brake pressure the driver applied for a short period of time after the driver takes their foot off of t...

  • Page 328

    For vehicles not equipped with the evic, perform the following steps: note: you must complete steps 1 through 8 within 90 seconds. 1. Center the steering wheel (front wheels pointing straight forward). 2. Shift the transmission into neutral. 3. Apply the parking brake. 4. Start the engine. 5. Releas...

  • Page 329

    Driver and compares it to the actual path of the vehicle. When the actual path does not match the intended path, esc applies the brake of the appropriate wheel to assist in counteracting the over-steer or under-steer condition • over-steer - when the vehicle is turning more than appropriate for the ...

  • Page 330

    Esc malfunction indicator light the “esc malfunction indicator light” in the instrument cluster will come on when the ignition switch is turned to the on position. It should go out with the engine running. If the “esc malfunction indicator light” comes on continu- ously with the engine running, a ma...

  • Page 331

    Partial off (four-wheel drive models) or on (two-wheel drive models) this mode is entered by momentarily pressing the “esc off” switch. When in “partial off” mode, the “esc off indicator light” will be illuminated. This mode is in- tended to be used if the vehicle is in deep snow, sand or gravel con...

  • Page 332

    The esc system shuts off. Esc is deactivated at low vehicle speeds so that it will not interfere with off-road driving however, esc function returns to provide the stability feature at speeds above 35 mph (56 km/h). The “esc off indicator light” will always be illuminated when esc is off. To turn es...

  • Page 333

    Tire safety information tire markings note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standar...

  • Page 334

    Tires designed to this standard have the letter “t” molded into the sidewall preceding the size designa- tion. Example: t145/80d18 103m. • high flotation tire sizing is based on u.S. Design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 r15 lt. 5 starting a...

  • Page 335

    Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ ....Blank.... ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t = temporary spare tire 31 = overall diameter in inches (in) 215 = s...

  • Page 336

    Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...

  • Page 337

    Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 338

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire pressure cold tire inflation pressure is defined as the tire pressure after ...

  • Page 339

    Tire loading and tire pressure tire placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar. Tire and loading information placard this placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total wei...

  • Page 340

    3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to th...

  • Page 341

    4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “xxx” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 ...

  • Page 342

    5 starting and operating 341.

  • Page 343

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 344

    Warning! (continued) • unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns...

  • Page 345

    Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.” cold tire infl...

  • Page 346

    Tire pressures for high speed operation the manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and ...

  • Page 347

    Warning! • temporary use spare tires are for emergency use only. With these tires, do not drive more than 50 mph (80 km/h). • temporary use spare tires have limited tread life. When the tread is worn to the tread wear indica- tors, the temporary use spare tire needs to be replaced. • be sure to foll...

  • Page 348

    Warning! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and d...

  • Page 349

    Life of tire the service life of a tire is dependent upon varying factors including, but not limited to: • driving style • tire pressure • distance driven warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can resul...

  • Page 350

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 351

    Caution! Damage to the vehicle may result if tire chains are used. Snow tires some areas of the country require the use of snow tires during winter. Standard tires are of the all-season type and satisfy this requirement as indicated by the m+s designation on the tire sidewall. If you need snow tires...

  • Page 352

    Tire pressure monitoring system (tpms) the tire pressure monitor system (tpms) will warn the driver of a low tire pressure based on the vehicle recom- mended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (6.9 kpa) for every 12°f (6.5°c). This means that when the ...

  • Page 353

    The tpms will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure. Once the low tire pressure warn- ing (tire pressure monitoring telltale light) illuminates, you must inc...

  • Page 354

    Caution! • the tpms has been optimized for the original equipment tires and wheels. Tpms pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, ...

  • Page 355

    • seasonal temperature changes will affect tire pressure, and the tpms will monitor the actual tire pressure in the tire. Base system this is the tpms warning indicator located in the instrument cluster. The tpms uses wireless technology with wheel rim mounted electronic sensors to monitor tire pres...

  • Page 356

    Check tpms warnings the tire pressure monitoring telltale light will flash on and off for 75 seconds and remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The ti...

  • Page 357

    4. For each subsequent ignition key cycle, a chime will sound and the tire pressure monitoring telltale light will flash on and off for 75 seconds and then remain on solid. 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the tp...

  • Page 358

    • various tire pressure monitoring system messages, which display in the electronic vehicle information center (evic) • yellow tire pressure monitoring telltale light tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illumi- nate in the instrument cluste...

  • Page 359

    Graphic display of the pressure value(s) will stop flash- ing, and the tire pressure monitoring light will extin- guish once the updated tire pressure(s) have been re- ceived. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information. Check tpms messag...

  • Page 360

    Will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the tpm sensors. 2. Installing some form of aftermarket window tinting that affects radio wave ...

  • Page 361

    5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the tpms will update automatically and the tire pressure monitoring telltale light will turn off, as long as no tire pressure is below the low-pressure warning limit in any of the...

  • Page 362

    Poor quality gasoline can cause problems such as hard starting, stalling and hesitations. If you experience these symptoms, try another brand of gasoline (with the ap- propriate octane rating for your engine) before consider- ing service for the vehicle. Reformulated gasoline many areas of the count...

  • Page 363

    E85 usage in non-flex fuel vehicles non-ffv vehicles are compatible with gasoline contain- ing 10% ethanol (e10). Gasoline with higher ethanol content may void the vehicle’s warranty. If a non-ffv vehicle is inadvertently fueled with e85 fuel, the engine will have some or all of these symptoms: • op...

  • Page 364

    It is even more important to look for gasoline without mmt in canada, because mmt can be used at levels higher than those allowed in the united states. Mmt is prohibited in federal and california reformu- lated gasoline. Materials added to fuel all gasoline sold in the united states is required to c...

  • Page 365

    Caution! (continued) • the use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentra- tions of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the respon...

  • Page 366

    Warning! (continued) • guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly. Until repaired, drive with all side windows fully open. • keep the liftgate closed when driving your veh...

  • Page 367

    Caution! • damage to the fuel system or emission control system could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. • a poorly fitting gas cap may cause the “malfunc- tion indicator light (mil)” to turn on. • to avoid fu...

  • Page 368

    Loose fuel filler cap message if the vehicle diagnostic system determines that the fuel filler cap is loose or improperly installed, a “gascap” message will be displayed in the odometer/trip odom- eter in the instrument cluster. Refer to “instrument cluster description” in “understanding your instru...

  • Page 369

    Gross vehicle weight rating (gvwr) the gvwr is the total allowable weight of your vehicle. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the gvwr. Tire size the tire size on the vehicle certification label represents the actual tire size on you...

  • Page 370

    Overloading can cause potential safety hazards and shorten useful service life. Heavier suspension compo- nents do not necessarily increase the vehicle’s gvwr. Loading to load your vehicle properly, first figure out its empty weight. Store heavier items down low and be sure you distribute their weig...

  • Page 371

    Exceed the gvwr. Refer to “vehicle loading/vehicle certification label” in “starting and operating” for further information. Gross trailer weight (gtw) the gtw is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or tem- porary) loaded in or on the trailer ...

  • Page 372

    Frontal area the frontal area is the maximum height multiplied by the maximum width of the front of a trailer. Trailer sway control the trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction assoc...

  • Page 373

    Trailer hitch classification your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional trailer tow prep package. See your authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weight...

  • Page 374

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/transmission frontal area max. Gtw (gross trailer wt.) max. Tongue wt. (see note) 2.0l auto/man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 15...

  • Page 375

    Never exceed the maximum trailer tongue weight stamped on your bumper or trailer hitch. Consider the following items when computing the weight on the rear axle of the vehicle: • the trailer tongue weight of the trailer. • the weight of any other type of cargo or equipment put in or on your vehicle. ...

  • Page 376

    Caution! • do not tow a trailer at all during the first 500 miles (805 km) the new vehicle is driven. The engine, axle or other parts could be damaged. • then, during the first 500 miles (805 km) that a trailer is towed, do not drive over 50 mph (80 km/h) and do not make starts at full throttle. Thi...

  • Page 377

    Warning! (continued) • safety chains must always be used between your vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. • vehicles with trailers should not be parke...

  • Page 378

    − check for signs of tire wear or visible tire damage before towing a trailer. Refer to “tires – general information” in “starting and operating” for the proper inspection procedure. − when replacing tires, refer to “tires – general infor- mation” in “starting and operating” for proper tire replacem...

  • Page 379

    Warning! • do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident. • towing any trailer will increase your stopping distance. When towing you should allow f...

  • Page 380

    Four-pin connector 1 — female pins 4 — park 2 — male pin 5 — left stop/turn 3 — ground 6 — right stop/turn seven-pin connector 1 — battery 5 — ground 2 — backup lamps 6 — left stop/turn 3 — right stop/turn 7 — running lamps 4 — electric brakes 5 starting and operating 379.

  • Page 381

    Towing tips before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic transmission the automatic transmission fluid and filter should be changed if you regularly tow a trailer for more than 45 minutes of continuous operation. Refer...

  • Page 382

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle (flat towing with all four wheels on the ground) recreational towing condi- tion manual trans- mission ve- hicles automatic transmission vehicles four wheel flat tow (all wheels on ground) yes never two wheel dol...

  • Page 384: Contents

    What to do in emergencies contents 䡵 hazard warning flasher . . . . . . . . . . . . . . . . 384 䡵 if your engine overheats . . . . . . . . . . . . . . . . 384 䡵 automatic transaxle overheating . . . . . . . . . . 385 䡵 jacking and tire changing . . . . . . . . . . . . . . . 386 ▫ jack location . . ....

  • Page 385

    Hazard warning flasher the hazard warning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press the s...

  • Page 386

    Caution! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the h (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the n...

  • Page 387

    Jacking and tire changing warning! • being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need t...

  • Page 388

    Preparations for jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel...

  • Page 389

    Warning! (continued) • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • block the wheel diagonally opposite the wheel to be raised. • set the parking brake firmly and set an automatic transmission in park; a manual transmission in rev...

  • Page 390

    2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground. Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in step 3. 3. There are two front jacking locations and two rear jacking locations...

  • Page 391

    Head is properly engaged with the lift area closest to the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged. Warning! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise th...

  • Page 392

    Warning! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. 10. Place the deflated (flat) tire in the cargo area. Have the tire repaired or replaced as soon as possible. ...

  • Page 393

    Warning! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. Preparations for jump-start the battery in your vehicle is located in the front of the engine compartment below the air intake duct. To access the battery remove the air intake duct...

  • Page 394

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be s...

  • Page 395

    3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is off. Warning! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-start...

  • Page 396

    Warning! Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then st...

  • Page 397

    Freeing a stuck vehicle if your vehicle becomes stuck in mud, sand or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between re- verse and 1st gear. Using minimal accelerator pedal pressure...

  • Page 398

    Towing a disabled vehicle with ignition key automatic transaxle • front wheel drive (fwd) vehicles can be towed with the front wheels elevated or on a flatbed truck (all four wheels off the ground). • all wheel drive (awd) vehicles must be towed on a flatbed truck (all four wheels off the ground). C...

  • Page 399

    Caution! • if the vehicle being towed requires steering, the ignition switch must be in the acc position, not in the lock position. • do not attempt to use sling-type equipment when towing. When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to ...

  • Page 400: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 2.0l . . . . . . . . . . . . . 401 䡵 engine compartment — 2.4l . . . . . . . . . . . . . 402 䡵 onboard diagnostic system — obd ii . . . . . . 403 ▫ loose fuel filler cap message . . . . . . . . . . . 403 䡵 emissions inspection and maintenance ...

  • Page 401

    ▫ cooling system . . . . . . . . . . . . . . . . . . . . . 417 ▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 422 ▫ automatic transmission (cvt) – if equipped . . . . . . . . . . . . . . . . . . . . . . . . 425 ▫ manual transmission – if equipped . . . . . . . 426 ▫ rear drive assembly...

  • Page 402

    Engine compartment — 2.0l 1 — washer fluid reservoir 6 — integrated power module 2 — power steering fluid reservoir 7 — battery (under cover) 3 — engine oil fill 8 — coolant pressure cap 4 — air cleaner filter 9 — engine oil dipstick 5 — brake fluid reservoir 10 — engine coolant reservoir 7 maintain...

  • Page 403

    Engine compartment — 2.4l 1 — washer fluid reservoir 6 — battery (under cover) 2 — power steering fluid reservoir 7 — air cleaner filter 3 — engine oil fill 8 — coolant pressure cap 4 — brake fluid reservoir 9 — engine oil dipstick 5 — integrated power module 10 — engine coolant reservoir 402 mainta...

  • Page 404

    Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 405

    Persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the mil. Resolving the problem will turn the mil light off. Emissions inspection and maintenance programs in some localities, ...

  • Page 406

    4. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m...

  • Page 407

    Dealer service your authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting...

  • Page 408

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or ...

  • Page 409

    Caution! Do not overfill the engine. Overfilling the engine as indicated by the range markings, as described above, on the engine oil dipstick will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change engine oil the oil ...

  • Page 410

    Engine oil viscosity (sae grade) sae 5w-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. Your engine oil filler cap also states the recommended engine oil viscosity grade for your engine. Lubricants which do not ...

  • Page 411

    Engine oil filter selection all of this manufacturer’s engines have a full-flow type disposable oil filter. Use a filter of this type for replace- ment. The quality of replacement filters varies consider- ably. Only high quality filters should be used to assure most efficient service. Mopar 威 engine...

  • Page 412

    Warning! • battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water. R...

  • Page 413

    Air conditioner maintenance for best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at thi...

  • Page 414

    Refrigerant recovery and recycling r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency and is an ozone-saving product. How- ever, the manufacturer recommends that air conditioning service be performed by authorized dealers or oth...

  • Page 415

    Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen t...

  • Page 416

    Or when the underside or rear of the vehicle is damaged; have an authorized technician inspect the complete ex- haust system and adjacent body areas for broken, dam- aged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger comp...

  • Page 417

    Caution! (continued) • damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued operation of ...

  • Page 418

    • do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idle or malfunctioning operating conditions. Cooling system warning! • when working near the radiator cooling fan, dis- connect the fan motor lead o...

  • Page 419

    Cooling system – drain, flush and refill refer to “maintenance schedule” for further information. If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits a...

  • Page 420

    Caution! (continued) • this vehicle has not been designed for use with propylene glycol based engine coolant (anti- freeze). Use of propylene glycol based engine coolant (antifreeze) is not recommended. Adding coolant your vehicle has been built with an improved engine coolant (antifreeze) that allo...

  • Page 421

    Note: mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent coolant changes. Cooling system pressure cap the cap must be fully tightened to prevent loss of engine coolant (antifreeze) and to ensure that engine coolant (antif...

  • Page 422

    Disposal of used engine coolant used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by ani- mals or children do not store ethylene glycol-...

  • Page 423

    If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • do not overfill the coolant recovery bottle. • check the coolant freeze point in the radiator and in the coolant recovery bottle. If engine coo...

  • Page 424

    Warning! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency...

  • Page 425

    Warning! • use only manufacturer’s recommended brake fluid. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid ...

  • Page 426

    Warning! (continued) • do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Caution! Use of improper brake fluids will affect overall clutch system performance. Improp...

  • Page 427

    Fluid level check the fluid level in the automatic transmission should be checked only by a trained technician. Fluid and filter changes refer to “maintenance schedule” for further information. Special additives do not add any materials (other than leak detection dyes) to continuously variable trans...

  • Page 428

    Note: if contaminated with water, the fluid should be changed immediately. Rear drive assembly (rda) – awd/4wd models only lubricant selection use only the manufacturer’s recommended fluid. Refer to “fluids, lubricants, and genuine parts” in “maintain- ing your vehicle” for further information. Flui...

  • Page 429

    Appearance care and protection from corrosion protection of body and paint from corrosion vehicle body care requirements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice and those that are sprayed on trees and road surfaces during other seasons, ...

  • Page 430

    • use a high quality cleaner wax, such as mopar 威 cleaner wax to remove road film, stains and to protect your paint finish. Take care never to scratch the paint. • avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. Caution! • do not use abrasiv...

  • Page 431

    • if you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • if a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • use mopar 威 touch up paint or equivalent on scratches as soon a...

  • Page 432

    • do not use any harsh solvents or any other form of protectants on stain repel products. Interior care use mopar 威 total clean or equivalent to clean fabric upholstery and carpeting. Use mopar 威 total clean or equivalent to clean vinyl upholstery. Mopar 威 total clean or equivalent is specifically r...

  • Page 433

    Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Glass surfaces all glass surfaces should be cleaned on a regular basis with mopar 威 glass cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use ca...

  • Page 434

    1. Clean with a wet, soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean, damp rag. 2. Dry with a soft cloth. Seat belt maintenance do not bleach, dye or clean the seat belts with chemical solvents or abrasive...

  • Page 435

    Cavity cartridge fuse mini- fuse description 1 empty empty 2 15 amp lt blue awd/4wd ecu feed cavity cartridge fuse mini- fuse description 3 10 amp red chmsl brake switch feed 4 10 amp red ignition switch feed/ ocm 5 20 amp yellow trailer tow – if equipped 6 10 amp red iod sw/pwr mir/ steering cntrl ...

  • Page 436

    Cavity cartridge fuse mini- fuse description 10 20 amp yellow ccn power locks/ interior lighting 11 15 amp lt blue power outlet 12 20 amp yellow ign run/acc inverter 13 20 amp yellow pwr run/acc outlet rr/dome lamp/ cigar lighter 14 10 amp red iod ccn 15 40 amp green rad fan relay bat- tery feed 16 ...

  • Page 437

    Cavity cartridge fuse mini- fuse description 25 10 amp red heated mirror – if equipped 26 15 amp lt blue eng asd relay feed 2 27 10 amp red ign run only orc feed 28 10 amp red ign run orc/ocm feed 29 hot car (no fuse re- quired) 30 20 amp yellow heated seat – if equipped 31 10 amp red headlamp washe...

  • Page 438

    Caution! • when installing the ipm cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the ipm, and possibly result in an electrical system failure. • when replacing a blown fuse, it is important to use only a fuse having ...

  • Page 439

    Lights bulbs – exterior bulb no. Low beam/high beam headlamp . . . . . . . . . . . . H13 front park/turn signal/side marker lamp . . . 3757ka front fog lamp . . . . . . . . . . . . . . . . . . . . . . Psx24w center high mounted stop lamp (chmsl) . . Led as- sembly rear tail/turn/stop lamp . . . . . ...

  • Page 440

    2. Reach into engine compartment and pull red lock out at connector. 3. Remove the green connector from the back of the bulb by pulling straight back. 7 maintaining your vehicle 439.

  • Page 441

    4. Twist the bulb to the left. 5. Pull bulb outward from assembly. Note: these are halogen bulbs. Take care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life. 440 maintaining your vehicle.

  • Page 442

    Fog lamps see your authorized dealer for replacement. Tail lamps, rear turn signals and backup lamps 1. Remove the two push-pins from the taillamp housing. 2. Grasp the taillamp and pull firmly to disengage the light from the aperture panel. 3. Twist and remove socket from the light. 4. Remove bulb ...

  • Page 443

    2. Rotate the socket 1/4 turn counterclockwise. 3. Pull the bulb from the socket. Center high-mounted stoplamp light is an led assembly. See your authorized dealer for replacement. 442 maintaining your vehicle.

  • Page 444

    Fluid capacities u.S. Metric fuel (approximate) 13.6 gallons 51.5 liters engine oil with filter 2.0l and 2.4l engine (sae 5w-20, api certified) 4.5 quarts 4.26 liters cooling system * 2.0l and 2.4l engine (mopar 威 engine coolant/antifreeze 5 year/100,000 mile formula or equivalent) 7.2 quarts 6.8 li...

  • Page 445

    Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hy- brid organic additive technology) or equivalent. Engine oil use api certified sae 5w-20 engine oil, meeting the requirements of chr...

  • Page 446

    Chassis component fluid, lubricant, or genuine part automatic transmission (cvt) – if equipped mopar 威 cvtf+4 威 manual transmission – if equipped mopar 威 atf+4 威 automatic transmission fluid or equivalent licensed atf+4 威 product. Rear drive assembly (rda) mopar 威 gear & axle lubricant sae 80w-90 ap...

  • Page 448: Maintenance Schedules

    Maintenance schedules contents 䡵 emissions control system maintenance . . . . . . 448 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 448 ▫ required maintenance intervals . . . . . . . . . . 450 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 449

    Emissions control system maintenance the scheduled maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system. These and all other maintenance services in- cluded in this manual, should be done t...

  • Page 450

    Note: • the oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change and even if the oil change indicator message is not illuminated. • change your engine oil more often if you drive your vehicle ...

  • Page 451

    • check the fluid levels of the coolant reservoir, brake master cylinder, and power steering — add as needed. • check all lights and other electrical items for correct operation. At each oil change • change the engine oil filter. • inspect the brake hoses and lines. • check the manual transmission f...

  • Page 452

    6,000 miles (10,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 12,000 miles (20,000 km) or 12 months maintenance service schedule ❏ change the engine...

  • Page 453

    18,000 miles (30,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 24,000 miles (40,000 km) or 24 months maintenance service schedule ❏ change the engi...

  • Page 454

    30,000 miles (50,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer reading date rep...

  • Page 455

    42,000 miles (70,000 km) or 42 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Odometer reading date repair ...

  • Page 456

    54,000 miles (90,000 km) or 54 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Odometer reading date repair ...

  • Page 457

    60,000 miles (100,000 km) or 60 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ inspect the brake linings; replace if necessary. ❏ adjust the parking brake on vehicles equipped wi...

  • Page 458

    66,000 miles (110,000 km) or 66 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 72,000 miles (120,000 km) or 72 months maintenance service schedule ❏ change the en...

  • Page 459

    78,000 miles (130,000 km) or 78 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 84,000 miles (140,000 km) or 84 months maintenance service schedule ❏ change the en...

  • Page 460

    90,000 miles (150,000 km) or 90 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ inspect and replace pcv valve if necessary. † ❏ adjust the parking brake on vehicles equipped with ...

  • Page 461

    102,000 miles (170,000 km) or 102 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ flush and replace the engine coolant if not done at 60 months. Odometer reading date repair order # dealer code signature authorized chrysler dealer 108,000 miles (1...

  • Page 462

    114,000 miles (190,000 km) or 114 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 8 m a i n t e n a n c e s c h e d u l e s maintenance schedules 461.

  • Page 463

    120,000 miles (200,000 km) or 120 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ inspect the brake linings; replace if necessary. ❏ adjust the parking brake on vehicles equipped ...

  • Page 464

    126,000 miles (210,000 km) or 126 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 132,000 miles (220,000 km) or 132 months maintenance service schedule ❏ change th...

  • Page 465

    138,000 miles (230,000 km) or 138 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 144,000 miles (240,000 km) or 144 months maintenance service schedule ❏ change th...

  • Page 466

    † this maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about...

  • Page 468: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469 ▫ prepare for the appointment . . . . . . . . . . . 469 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . 469 ▫ be reasonable with r...

  • Page 469

    䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 475 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 475 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . 475 ▫ temperature grades . . . . . . . . . . . . . . . . . . 47...

  • Page 470

    Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...

  • Page 471

    This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...

  • Page 472

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...

  • Page 473

    We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to reso...

  • Page 474

    If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...

  • Page 475

    • service manuals these comprehensive service manuals provide the information that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintaining, servicing, and repairing chrysler group llc vehicles. A complete working knowledge of the vehicle, system, and/or...

  • Page 476

    Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....

  • Page 477

    Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...

  • Page 478: Index

    Index 10

  • Page 479

    Abs (anti-lock brake system) . . . . . . . . . . . . . . 319 adding engine coolant (antifreeze) . . . . . . . . . . 419 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 adding washer fluid . . . . . . . . . . . . . . . . . . . . . 414 additives, fuel . . . . . . . . . . . . . . ...

  • Page 480

    Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . 385 selection of lubricant . . . . . . . . . . . . . . . . . . . 425 shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 special additives . . . . . . . . . . . . . . . . . . . . . . 426 autostick . . . . . . . . . . ...

  • Page 481

    Cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 cargo load floor . . . . . . . . . . . . . . . . . . . . . . . . 176 cargo tie-downs . . . . . . . . . . . . . . . . . . . . . . . . 176 cellular phone . . . . . . . . . . . . . . . . . . . . . . . . 96,270 center high mounted s...

  • Page 482

    Disposal of used coolant . . . . . . . . . . . . . . . . 421 drain, flush, and refill . . . . . . . . . . . . . . . . . . 418 inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 421 points to remember . . . . . . . . . . . . . . . . . 420,421 pressure cap . . . . . . . . . . . . . . . ....

  • Page 483

    Brake assist system . . . . . . . . . . . . . . . . . . . . 322 electronic roll mitigation . . . . . . . . . . . . . . . . 323 electronic stability program . . . . . . . . . . . . . . . 327 traction control system . . . . . . . . . . . . . . . . . 323 electronic speed control (cruise control) . . . ...

  • Page 484

    Hazard warning . . . . . . . . . . . . . . . . . . . . . . . 384 turn signal . . . . . . . . . . . . . . . . . . . . . . 85,190,441 flat tire stowage . . . . . . . . . . . . . . . . . . . . . . . . 391 flooded engine starting . . . . . . . . . . . . . . . . . . . 292 fluid, brake . . . . . . . . . ....

  • Page 485

    Gasoline (fuel) . . . . . . . . . . . . . . . . . . . . . . . 360,443 gasoline, reformulated . . . . . . . . . . . . . . . . . . . 361 gauges coolant temperature . . . . . . . . . . . . . . . . . . . 195 fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 odometer . . . . . . . . ...

  • Page 486

    Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ignition key removal . . . . . . . . . . . . . . . . . . . . . 12 immobilizer (sentry key) . . . . . . . . . . . . . . . . . . . 14 infant restraint . . . ...

  • Page 487

    Liftgate window wiper/washer . . . . . . . . . . . . . 178 light bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . 85,437 lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85,143 airbag . . . . . . . . . . . . . . . . . . . . . . . . 65,70,83,190 alarm . . . . . . . . . . . ...

  • Page 488

    Locks child protection . . . . . . . . . . . . . . . . . . . . . . . . 31 door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 power door . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 lubrication, body . . . . . . . . . . . . . . . . . . . . . . . 413 luggage rack (roof...

  • Page 489

    Octane rating, gasoline (fuel) . . . . . . . . . . . . . . 360 odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196,197 oil change indicator . . . . . . . . . . . . . . . . . . . . . 204 oil change indicator, reset ...

  • Page 490

    Transfer unit . . . . . . . . . . . . . . . . . . . . . . . . . 427 windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 power steering fluid . . . . . . . . . . . . . . . . . . . . . 445 power transfer unit . . . . . . . . . . . . . . . . . . . . . . 427 pregnant women and seat belt...

  • Page 491

    Retractable cargo area cover . . . . . . . . . . . . . . . 174 roll over warning . . . . . . . . . . . . . . . . . . . . . . . . 4 roof type carrier . . . . . . . . . . . . . . . . . . . . . . . 180 rotation, tires . . . . . . . . . . . . . . . . . . . . . . . . . . 350 safety checks inside vehicle ...

  • Page 492

    Sentry key replacement . . . . . . . . . . . . . . . . . . . 15 service assistance . . . . . . . . . . . . . . . . . . . . . . . 469 service contract . . . . . . . . . . . . . . . . . . . . . . . . . 471 service manuals . . . . . . . . . . . . . . . . . . . . . . . . 473 setting the clock . . . . . ...

  • Page 493

    System, remote starting . . . . . . . . . . . . . . . . . . . . 25 tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441 temperature control, automatic (atc) . . . . . . . . 274 temperature gauge, engine cool...

  • Page 494

    Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346 tread wear indicators . . . . . . . . . . . . . . . . . . . 347 tongue weight/trailer weight . . . . . . . . . . . . . . 373 towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 24-hour towing assistance . . . ....

  • Page 495

    Uniform tire quality grades . . . . . . . . . . . . . . . . 475 universal consumer interface (uci) connector . . . 257 universal transmitter . . . . . . . . . . . . . . . . . . . . . 155 unleaded gasoline . . . . . . . . . . . . . . . . . . . . . . . 360 vanity mirrors . . . . . . . . . . . . . . . ...

  • Page 496

    Chrysler group llc 10mk74-126-ac 3rd edition printed in u.S.A..