Jeep 2010 Patriot Owner's Manual

Other manuals for 2010 Patriot: User Manual, Owner's Manual, User Manual

Page of 472

Download

Print this page

Bookmark us

TABLE OF CONTENTS

SECTION

PAGE

INTRODUCTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

UNDERSTANDING YOUR INSTRUMENT PANEL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

STARTING AND OPERATING

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273

WHAT TO DO IN EMERGENCIES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365

MAINTAINING YOUR VEHICLE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379

MAINTENANCE SCHEDULES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425

IF YOU NEED CONSUMER ASSISTANCE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445

INDEX

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455

1 2 3 4 5 6 7 Next › »

Summary of 2010 Patriot

Page 1
Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 3 understanding the featu...
Page 3: Introduction
Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 rollover warning . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 5 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 7 䡵 vehicle ide...
Page 4
Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This owner’s manual has been prepared with the assis- tance of service and ...
Page 5
Control. Failure to operate this vehicle safely may result in an accident, rollover of the vehicle, and severe or fatal injury. Drive carefully. Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal u...
Page 6
6 introduction.
Page 7
Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in an accident or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...
Page 8
Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 8 introduction.
Page 9: Contents
Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 12 ▫ ignition key removal . . . . . . . . . . . . . . . . . . 12 ▫ locking doors with a key . . . . . . . . . . . . . . 15 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . 15 䡵 sen...
Page 10
▫ to lock the doors and liftgate . . . . . . . . . . 21 ▫ sound horn with remote key lock . . . . . . . . 21 ▫ flash lights with remote key lock/unlock . . 22 ▫ using the panic alarm . . . . . . . . . . . . . . . . . 22 ▫ programming additional transmitters . . . . . . 23 ▫ general information . . ....
Page 11
▫ automatic locking retractors (alr) mode — if equipped . . . . . . . . . . . . . . 47 ▫ seat belt pretensioners — if equipped . . . . . . 48 ▫ supplemental rear impact active head restraints (ahr) . . . . . . . . . . . . . . . . . . . . . . 48 ▫ enhanced seat belt use reminder system (beltalert 威) ...
Page 12
A word about your keys the authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition key removal automatic transmission — if...
Page 13
4. Remove the key from the ignition switch lock cylinder. Note: if you try to remove the key before you place the shift lever in park, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If ...
Page 14
Caution! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual transmission — if equipped 1. Turn the ignition switch to the acc (accessory) position. 2. Push the key and cylinder inward and rotate the ...
Page 15
Locking doors with a key you can insert the key with either side up. To lock the door, turn the key to the right. To unlock the door, turn the key to the left. Refer to “body lubrication” under “maintenance procedures” in section 7. Key-in-ignition reminder opening the driver’s door when the key is ...
Page 16
If the vehicle security light turns on during normal vehicle operation (vehicle running for longer than 10 sec- onds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible by an authorized dealer. Note: the sentry key 威 immobilizer s...
Page 17
Customer key programming if you have two valid sentry keys 威, you can program new sentry keys 威 to the system by performing the following procedure: 1. Cut the additional sentry key 威 transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ign...
Page 18
Your vehicle. The remaining keys must then be repro- grammed. All vehicle keys must be taken to an authorized dealer at the time of service to be reprogrammed. General information the sentry key 威 system complies with fcc rules part 15 and with rss-210 of industry canada. Operation is subject to the...
Page 19
Disarm. After approximately 16 seconds, the vehicle security light will flash slowly. This shows that the vehicle security alarm is fully armed. To disarm the system press unlock on the rke transmitter, or insert the key into the ignition switch and turn the ignition switch to the on position. Vehic...
Page 20
Turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote key unlock, driver door/all first press this feature lets you program the system to unlock either the driver’s door or all doors on the first press of the unlock button on the rke t...
Page 21
Equipped with the evic. Refer to “illuminated ap- proach,” under “personal settings (customer- program- mable features),” under “electronic vehicle information center (evic)” in section 4. To lock the doors and liftgate press and release the lock button on the rke transmit- ter to lock all doors and...
Page 22
Flash lights with remote key lock/unlock this feature will cause the turn signal lights to flash when the doors are locked or unlocked with the rke transmit- ter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • for vehicles equipped with the evic, re...
Page 23
The panic alarm will stay on for three minutes unless you turn it off by pressing the panic button a second time or if the vehicle speed is 5 mph (8 km/h) or greater. Note: when you turn off the panic alarm by pressing the panic button a second time, you may have to be closer to the vehicle due to t...
Page 24
The recommended replacement battery is cr2032. 1. If the rke transmitter is equipped with a screw, remove the screw. With the rke transmitter buttons facing down, use a flat blade to pry the two halves of the rke transmitter apart. Make sure not to damage the elastomer seal during removal. 2. Remove...
Page 25
How to use remote start all of the following conditions must be met before the engine will remote start: • shift lever in park • doors closed • hood closed • hazard switch off • brake switch inactive (brake pedal not pressed) • ignition key removed from ignition switch • battery at an acceptable cha...
Page 26
Note: • the park lamps will turn on and remain on during remote start mode. • for security, power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the remote start mode. • the engine can be started two consecutive times (two 15-minute cycles) with the rke transm...
Page 27
Door locks manual door locks use the manual door lock plunger to lock the doors from inside the vehicle. If the plunger is down when the door is closed, the door will lock. Make sure the keys are not inside the vehicle before closing the door. Warning! • for personal security and safety in the event...
Page 28
Power door locks a power door lock switch is located on the driver’s door panel. Press this switch to lock or unlock the doors and liftgate. Note: to prevent from locking the key in the vehicle, the power door lock switch will not operate when the key is in the ignition and either front door is open...
Page 29
2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h), and 6. The doors were not previously locked using the power door lock switch or remote keyless entry (rke) transmitter. Automatic door locks programming the automatic ...
Page 30
Note: • if you do not hear the chime it means that the system did not enter the programming mode and you will need to repeat the procedure. • use the automatic door locks feature in accordance with local laws. Automatic unlock doors on exit the doors will unlock automatically if: 1. The automatic un...
Page 31
4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. Note: • if you do not hear the chime it means that the system did not enter the programming mode and you will need to repeat the procedure. • use the a...
Page 32
Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Note: for emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the ...
Page 33
The window controls on the driver’s door trim panel control all the door windows. There are single window controls on each passenger door trim panel, which oper- ate the passenger door windows. The window controls will operate when the ignition switch is in the on or acc position. Note: • for vehicl...
Page 34
Window lockout switch the window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, press the window lockout switch. To enable the window con- trols, press the window lockout switch a second time. Liftga...
Page 35
Note: • in the event of a power malfunction, or the rke transmitter is inoperative, insert the key into the liftgate lock cylinder and turn to the right (manual lock models only). Using the liftgate handle, pull the liftgate open with one fluid motion. • although the liftgate has no inside release m...
Page 36
Gas props support the liftgate in the open position. However, because the gas pressure drops with tempera- ture, it may be necessary to assist the props when opening the liftgate in cold weather. Occupant restraints some of the most important safety features in your vehicle are the restraint systems...
Page 37
Infant and child restraint systems. For more information on latch, see lower anchors and tether for children (latch) in this section. Note: the advanced front airbags have a multistage inflator design. This allows the airbag to have different rates of inflation based on severity and type of collisio...
Page 38
Normal conditions. But in a collision, the belt will lock and reduce the risk of you striking the inside of the vehicle or being thrown out. Warning! • it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to b...
Page 39
Lap/shoulder belt operating instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is along side the pillar near the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to a...
Page 40
Warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • a belt that is too loose will not protect you as well. In a sudden stop ...
Page 41
4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. War...
Page 42
6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. Warning! A frayed or torn belt could rip apart in a collision and leave you with no protecti...
Page 43
As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage, try to move it down to make sure that it is locked in position. In the rear seat, move toward the center of the seat to ...
Page 44
1. Remove the mini-latch and regular latch from its stowed position in the right rear side trim panel. 2. Grasp the mini-latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. Mini-latch stowage routing the rear center shoulder belt 44 thin...
Page 45
4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in the seat. Slide the regular latch plate up the webbing as far as necessary to allow the belt to go around your lap. 6. When the belt is long enough to fit, insert the la...
Page 46
On the shoulder belt. To loosen the lap belt if it is too tight, pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 8. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in t...
Page 47
Slide the latch plate down the webbing to allow the belt to retract fully. Insert the mini-latch plate into the slot provided in the trim panel. Lap/shoulder belt untwisting procedure use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possibl...
Page 48
3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. How to disengage the automatic locking mode disconnect the combination lap/shoulder belt and allow it to retract completely to disengage the automa...
Page 49
How the active head restraints (ahr) work the occupant restraint controller (orc) determines whether the severity or type of rear impact require the active head restraints (ahr) to deploy. In case of ahr deployment both driver and front passenger seat ahr’s will be deployed. When ahr’s deploy during...
Page 50
Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident. Note: for more information on properly adjusting and positi...
Page 51
3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 1 — downward movement 2 — rearward movement 3 — final downward movement to engage locking mechanism 2 things to know before starting your vehicle 51.
Page 52
4. The ahr front soft foam and trim half should lock into the back decorative plastic half. Note: • if you have difficulties or problems resetting the head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an authorized d...
Page 53
Beltalert 威 programming beltalert 威 can be enabled or disabled by your authorized dealer or by performing the following procedure: note: the following steps must occur within the first 60 seconds of the ignition switch being turned to the on or start position. Chrysler group llc does not recom- mend...
Page 54
Warning! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Seat belts and pregnant women we r...
Page 55
Note: these airbags are certified to the new federal regulations for advanced airbags. The advanced front airbags have a multistage inflator design. This allows the airbag to have different rates of inflation that are based on the severity and type of collision. This vehicle is equipped with supplem...
Page 56
• supplemental side airbag inflatable curtains (sabic) • supplemental side seat airbags — if equipped • front and side impact sensors • steering wheel and column • instrument panel • knee impact bolster • front seat belt pretensioners — if equipped advanced front airbag features the advanced front a...
Page 57
Warning! • no objects should be placed over or near the airbag on the instrument panel, because any such objects could cause harm if the vehicle is in a crash severe enough to cause the airbag to inflate. • do not put anything on or around the airbag covers or attempt to open them manually. You may ...
Page 58
When the bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each bag deploys independently, that is a left side impact deploys the left bag only and a right-side impact deploys only the right bag. Supplemental side airbag inflatable curtain (sabic) sabic airbags offe...
Page 59
The system includes sensors adjacent to both front and rear seat occupants that are calibrated to deploy the sabic airbags during impacts that require airbag occu- pant protection. Warning! • if your vehicle is equipped with left and right side airbag inflatable curtain (sabic), do not stack luggage...
Page 60
Children that are not big enough to wear the vehicle seat belt properly (see section on child restraints) should be secured in the rear seat in child restraints or belt- positioning booster seats. Older children who do not use child restraints or belt-positioning booster seats should ride properly b...
Page 61
Warning! • relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly. In some collisions, the airbags won’t deploy at all. Always wear your seat belts even though you have airbags. • being too close to the steering w...
Page 62
The advanced front airbags will not deploy in all frontal collisions, including some that may produce substantial vehicle damage — for example, some pole collisions, truck underrides, and angle offset collisions. On the other hand, depending on the type and location of impact, advanced front airbags...
Page 63
It also includes diagnostics that will illuminate the instru- ment cluster airbag warning light if a malfunction is noted. The diagnostics also record the nature of the malfunction. Warning! Ignoring the airbag warning light in your instru- ment panel could mean you won’t have the airbags to protect...
Page 64
The orc determines if a side collision requires the side airbags to inflate based on the severity and type of collision. The orc monitors the readiness of the electronic parts of the system whenever the ignition switch is in the start or on positions. These include all of the items previously mentio...
Page 65
Because airbag sensors estimate deceleration over time, vehicle speed and damage are not good indicators of whether or not an airbag should have deployed. Note: in a rollover the pretensioners and/or sabic airbags may deploy on both sides of the vehicle. Front and side impact sensors in front and si...
Page 66
Passenger as the airbags deploy and unfold. The abrasions are similar to friction rope burns or those you might get sliding along a carpet or gymnasium floor. They are not caused by contact with chemicals. They are not permanent and normally heal quickly. However, if you haven’t healed significantly...
Page 67
Maintaining your airbag system warning! • modifications to any part of the airbag system could cause it to fail when you need it. You could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the stee...
Page 68
Airbag warning light you will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system immediately. • the airbag warning light does not come...
Page 69
2. Under certain circumstances, edr data may not be recorded (e.G., loss of battery power). In conjunction with other data gathered during a com- plete accident investigation, the electronic data may be used by chrysler group llc and others to learn more about the possible causes of crashes and asso...
Page 70
3. Requested by police under a legal warrant. 4. Otherwise required by law. Data parameters that are recorded: • diagnostic trouble code(s) and warning light status for electronically-controlled safety systems, including the airbag system • vehicle speed • engine rpm • brake switch status • pedal po...
Page 71
Infants and child restraints there are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to ensure you have the correct seat for your child. Use the restraint that is correct fo...
Page 72
Older children and child restraints • children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction are for children who weigh 20 to 40 lbs (9 to 18 kg) an...
Page 73
Here are some tips on getting the most out of your child restraint: • before buying any restraint system, make sure that it has a label certifying that it meets all applicable safety standards. We also recommend that you make sure that you can install the child restraint in the vehicle where you wil...
Page 74
Into the buckle. Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. Finally, pull on any excess webbing to tighten the lap portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally, ...
Page 75
Automatic-locking retractor (alr) to operate the switchable retractor, pull the belt from the retractor until there is enough allowance to pass it through the child restraint and slide the latch plate into the buckle. Then pull on the belt until it is all removed from the retractor. Allow the belt t...
Page 76
Latch-compatible, you can only install the child re- straints using the vehicle’s seat belts. Please refer to installing the child restraint system for typical installa- tion instructions. Child restraints systems having attachments designed to connect to the lower anchorages are now available. Chil...
Page 77
Note: when using the latch attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked be...
Page 78
In general, you will first loosen the adjusters on the lower and tether straps so that you can attach the hook or connector to the lower and tether anchorages more easily. The tether strap should be routed over the center of the head restraint and attached to the tether anchor on the rear of the sea...
Page 79
Warning! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap. Transporting pets airbags deploying in the front seat could harm your pet. An ...
Page 80
Safety tips transporting passengers never transport passengers in the cargo area. Warning! • it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • do not allow people to r...
Page 81
If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control blower switch is set at high speed. Do not use the recirculation mode. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exha...
Page 82
Defroster check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your autho- rized dealer for service if your defroster is inoperable. Periodic safety checks you should make outside the vehicle...
Page 83: Contents
Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 ▫ inside day/night mirror . . . . . . . . . . . . . . . . 87 ▫ automatic dimming mirror — if equipped . . . 88 ▫ power mirrors . . . . . . . . . . . . . . . . . . . . . . . 89...
Page 84
䡵 voice recognition (vr) system — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 120 ▫ voice recognition (vr) system operation . . . 120 ▫ commands . . . . . . . . . . . . . . . . . . . . . . . . 121 ▫ voice training . . . . . . . . . . . . . . . . . . . . . . 125 䡵 seats . . . . . ...
Page 85
▫ instrument panel dimming . . . . . . . . . . . . . 142 ▫ map/reading lights . . . . . . . . . . . . . . . . . . 143 䡵 windshield wipers and washers . . . . . . . . . . 144 ▫ windshield wiper operation . . . . . . . . . . . . 144 ▫ intermittent wiper system . . . . . . . . . . . . . . 145 ▫ windshi...
Page 86
▫ closing the sunroof . . . . . . . . . . . . . . . . . . 159 ▫ pinch protect feature . . . . . . . . . . . . . . . . . 159 ▫ pinch protect override . . . . . . . . . . . . . . . . 160 ▫ venting sunroof — express . . . . . . . . . . . . . 160 ▫ sunshade operation . . . . . . . . . . . . . . . . . . ...
Page 87
Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicl...
Page 88
Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated. Ca...
Page 89
Power mirrors the power mirror controls are located on the driver’s door trim panel. To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When you are finished adjusting the mirror, turn the...
Page 90
Outside mirror — driver side adjust the flat outside mirror to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. Outside mirror — passenger side adjust the convex outside mirror to center on the adja- cent lane of traffic with a slight overlap of...
Page 91
Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distan...
Page 92
Vanity mirrors — if equipped to use the mirror, pull the sun visor down and rotate the mirror cover upward. Sun visor sliding feature the sun visors may be pulled out to provide extended coverage of the side glass. Uconnect™ phone — if equipped uconnect™ phone is a voice-activated, hands-free, in- v...
Page 93
• www.Jeep.Com/uconnect • or call 1–877–855–8400 uconnect™ phone allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The uconnect™ phone is driven through your bluetooth 威 ...
Page 94
Voice recognition button actual button location may vary with the ra- dio. The individual buttons are described in the “operation” section. The uconnect™ phone can be used with any hands-free profile certified bluetooth 威 cellular phone. See the uconnect™ website for supported phones. If your cellu-...
Page 95
• for each feature explanation in this section, only the combined form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the combined form voice com- mand ⬙phonebook new entry,⬙ or you can br...
Page 96
The following are general phone to uconnect™ phone pairing instructions: • press the button to begin. • after the ⬙ready⬙ prompt and the following beep, say ⬙setup phone pairing.⬙ • when prompted, after the beep, say ⬙pair a phone⬙ and follow the audible prompts. • you will be asked to say a four-di...
Page 97
• the system will prompt you to say the number you want to call. • for example, you can say ⬙234-567-8901⬙. • the uconnect™ phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by saying a name • press the button to begin. • after the ⬙read...
Page 98
• when prompted, enter the number designation (e.G., ⬙home,⬙ ⬙work,⬙ ⬙mobile,⬙ or ⬙pager⬙). This will allow you to store multiple numbers for each phonebook entry, if desired. • when prompted, recite the phone number for the phonebook entry that you are adding. After you are finished adding an entry...
Page 99
• depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the previous downloaded phonebook is available for use. • only the phonebook of the currently connected cellu- lar phone is accessible. • ...
Page 100
The uconnect™ phone, and then send the address book entry via bluetooth 威. Please see your phone owner’s manual for specific instructions on how to drop the bluetooth 威 connection. • if the phonebook entry is longer than 24 characters, it will only use the first 24 characters. Edit uconnect™ phonebo...
Page 101
Delete uconnect™ phonebook entry note: editing phonebook entries is recommended when the vehicle is not in motion. • press the button to begin. • after the ⬙ready⬙ prompt and the following beep, say ⬙phonebook delete.⬙ • after you enter the phonebook delete menu, you will then be asked for the name ...
Page 102
List all names in the uconnect™ phonebook • press the button to begin. • after the ⬙ready⬙ prompt and the following beep, say ⬙phonebook list names.⬙ • the uconnect™ phone will play the names of all the phonebook entries, including the downloaded phone- book entries, if available. • to call one of t...
Page 103
Answer or reject an incoming call - call currently in progress if a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cellular phone. Press the button to place the current call on hold and an...
Page 104
Three-way calling to initiate three-way calling, press the button while a call is in progress, and make a second phone call, as described under ⬙making a second call while current call is in progress. ⬙ after the second call has established, press and hold the button until you hear a double beep, in...
Page 105
• after the ignition key is switched to off, a call can continue on the uconnect™ phone for a certain dura- tion, after which the call is automatically transferred from the uconnect™ phone to the cellular phone. • an active call is automatically transferred to the cellu- lar phone after the ignition...
Page 106
• after the ⬙ready⬙ prompt and the following beep, say ⬙emergency⬙ and the uconnect™ phone will instruct the paired cellular phone to call the emergency num- ber. This feature is supported in the u.S., canada, and mexico. Note: • the emergency number dialed is based on the country where the vehicle ...
Page 107
Mexico city in mexico). Please refer to the 24-hour ⬙towing assistance⬙ coverage details on the dvd in the warranty information booklet and the 24-hour towing assistance references. • if supported, this number may be programmable on some systems. To do this, press the button and say “setup”, followe...
Page 108
Also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager. You can also send stored uconnect™ phonebook entries as tones for fast and easy access to voice mail and pager entries. To use this feature, dial the number you wish to call ...
Page 109
Phone and network status indicators if available on the radio and/or on a premium display such as the instrument panel cluster, and supported by your cellular phone, the uconnect™ phone will provide notification to inform you of your phone and network status when you are attempting to make a phone c...
Page 110
Advanced phone connectivity transfer call to and from cellular phone the uconnect™ phone allows ongoing calls to be trans- ferred from your cellular phone to the uconnect™ phone without terminating the call. To transfer an ongoing call from your uconnect™ phone paired cellular phone to the uconnect™...
Page 111
Select another cellular phone this feature allows you to select and start using another phone paired with the uconnect™ phone. • press the button to begin. • after the ⬙ready⬙ prompt and the following beep, say ⬙setup select phone⬙ and follow the prompts. • you can also press the button at any time ...
Page 112
Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers, the uconnect™ phone voice training feature may be used. To enter this training mode, follow one of the two following proce- dures: from outside the uconnect™ phone mode (e.G., from radio m...
Page 113
• performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • even though the system is designed for users speaking in north american english, french, and spanish ac- cents,...
Page 114
Phone far end audio performance • audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • performance, such as audio clarity, ...
Page 115
3 understanding the features of your vehicle 115.
Page 116
116 understanding the features of your vehicle.
Page 117
3 understanding the features of your vehicle 117.
Page 118
Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home 118 unders...
Page 119
Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...
Page 120
General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....
Page 121
If you ever wish to interrupt the system while it lists options, press the button, listen for the beep, and say your command. Pressing the button while the system is speaking is known as “barging in.” the system will be interrupted, and after the beep, you can add or change commands. This will becom...
Page 122
Changing the volume 1. Start a dialogue by pressing the button. 2. Say a command (e.G., “help”). 3. Use the on/off volume rotary knob to adjust the volume to a comfortable level while the voice recogni- tion (vr) system is speaking. Please note the volume setting for vr is different than the audio s...
Page 123
• “radio menu” (to switch to the radio menu) • “main menu” (to switch to the main menu) satellite radio to switch to satellite radio mode, say “sat” or “satellite radio”. In this mode, you may say the following com- mands: • “channel number” (to change the channel by its spoken number) • “next chann...
Page 124
− “continue” (to continue recording) − “delete” (to delete the recording) • “play memos” (to play previously recorded memos) — during the playback you may press the button to stop playing memos. You proceed by saying one of the following commands: − “repeat” (to repeat a memo) − “next” (to play the ...
Page 125
Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers the uconnect™ voice “voice training” feature may be used. 1. Press the button, say “system setup” and once you are in that menu then say “voice training.” this will train your own voice to ...
Page 126
Front seat adjustment the adjusting bar is at the front of the seats, near the floor. Pull the bar upward to move the seat forward or rearward. Release the bar once the seat is in the position desired. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjuster...
Page 127
Manual seat height adjustment — if equipped the driver’s seat height can be raised or lowered by using the handle on the outboard side of the seat to adjust the driving position. Manual lumbar — if equipped the lumbar adjustment handle is located on the outboard side of the driver’s seat. To increas...
Page 128
Driver’s seatback recline to recline the seatback, lean forward before lifting the handle, then lean back to the desired position and release the handle. Lift the handle to return the seatback to an upright position. Warning! Do not ride with the seatback reclined so that the shoulder belt is no lon...
Page 129
Six-way power seats — if equipped the power seat switch is located on the outboard side of the seat near the floor. Use the switch to move the seat up, down, forward, rearward, or to tilt the seat. Warning! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat co...
Page 130
Heated seats — if equipped this feature heats the front driver and passenger seats. The heaters provide the same heat level for both the seat cushion and the seatback. The controls for the front heated seats are located on the center instrument panel area. After turning the ignition on, you can choo...
Page 131
Warning! (continued) • do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. Caution! Repeated...
Page 132
Adjusting active head restraints active head restraints can reduce the risk of injury in the event of a rear impact. The active head restraint should be adjusted so the top of the head restraint is located above the top of your ear. To raise the head restraint, pull upward on the head restraint (on ...
Page 133
For comfort the active head restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. Push button activ...
Page 134
Note: • the head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. • in the event of deployment of an active head re- straint, refer to “resetting active head restraints (ahr)” unde...
Page 135
Warning! (continued) • do not place items over the top of the active head restraint, such as coats, seat covers or portable dvd players. These items may interfere with the operation of the active head restraint in the event of an accident and could result in serious injury or death. • active head re...
Page 136
To raise the seatback, pull the strap forward and lift the seatback into its upright position. Warning! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers...
Page 137
Warning! • do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only with the vehicle is parked. • it is extremely dangerous to ride in a...
Page 138
2. Move the safety catch located under the front edge of the hood, near the center and raise the hood. Lift the hood prop rod, clipped to the right side (left side facing hood) of the engine compartment, to secure the hood in the open position. Place the hood prop at the location stamped into the in...
Page 139
Lights multifunction lever the multifunction lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and the fog lights. The multifunction lever is located on the left side of the ste...
Page 140
Lights-on reminder if the headlights or parking lights are left on after the ignition is turned off, a chime will sound to alert the driver when the driver’s door is opened. Fog lights — if equipped the front fog light switch is on the multifunction lever. To activate the front fog lights, turn on t...
Page 141
Daytime running lights — if equipped the high beam lights will come on as daytime running lights (drl) at drl intensity (lower), whenever the ignition is on, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any position e...
Page 142
Lane change assist tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/low beam switch push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction le...
Page 143
Map/reading lights these lights are mounted between the sun visors above the rear view mirror. Each light is turned on by pressing the button. Press the button a second time to turn the light off. The lights also come on when a door is opened or the dimmer control is turned fully upward, past the se...
Page 144
Note: the lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. They will not turn off automatically. Windshield wipers and washers the windshield wiper/washer control lever is located on the right side of the steering colum...
Page 145
Intermittent wiper system use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever. Rotate the end of the lever upward (clockwise) to decrease the delay time and downwar...
Page 146
Warning! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use. Mist feature push...
Page 147
Caution! In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted. Tilt steering colum...
Page 148
Warning! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle. Failure to follow this war...
Page 149
To activate push the on/off button. The cruise indicator in the instrument cluster will illuminate. To turn the system off, push the on/off button a second time. The cruise indicator will turn off. The system should be turned off when not in use. Warning! Leaving the electronic speed control system ...
Page 150
Resume accel position, the set speed will continue to increase until the lever is released, then the new set speed will be established. Tapping resume accel once will result in a 1 mph (1.6 km/h) speed increase. Each time the lever is tapped, speed increases so that tapping the lever three times wil...
Page 151
To accelerate for passing press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Using electronic speed control on hills note: the electronic speed control system maintains speed up and down hills. A slight speed change on moderate hills is...
Page 152
The homelink 威 buttons that are located in the headliner or sun visor designate the three different homelink 威 channels. Note: homelink 威 is disabled when the vehicle secu- rity alarm is active. Warning! • your motorized door or gate will open and close while you are training the universal transceiv...
Page 153
Programming homelink 姞 before you begin if you have not trained any of the homelink 威 buttons, erase all channels before you begin training. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. It is recommended that a new battery be placed in the handhe...
Page 154
• after training a homelink威 channel, if the garage door does not operate with homelink 威 and the ga- rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “programming a rolling code system.” 4. Press and hold the just-trained ho...
Page 155
6. Firmly press and release the learn or training button. The name and color of the button may vary by manufacturer. Note: you have 30 seconds in which to initiate the next step after the learn button has been pressed. 7. Return to the vehicle and press the programmed homelink 威 button twice (holdin...
Page 156
Successfully accepted the frequency signal. The indica- tor light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with step 4 under “programming homelink 威” earlier in this section. Using homelink 姞 to operat...
Page 157
Troubleshooting tips if you are having trouble programming homelink 威, here are some of the most common solutions: • replace the battery in the original transmitter. • press the learn button on the garage door opener to complete the training for a rolling code. • did you unplug the device for traini...
Page 158
Power sunroof — if equipped the power sunroof switch is located in the reading light. Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. S...
Page 159
Opening the sunroof manual mode to open the sunroof, press and hold the switch rearward to full open. Any release of the switch will stop the movement and the sunroof will remain in a partial open condition until the switch is pushed and held rearward again. Express mode press the switch rearward an...
Page 160
Pinch protect override if a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. This allows the sunroof to move towards the close position. Note: pinch protection is disabled while the switch is pressed. Venting sunroof...
Page 161
Ignition off operation the sunroof will also operate up to 45 seconds after the ignition has been turned off. The sunroof operation will be canceled if either of the front doors are opened during the 45 second time period. Electrical power outlets there is a standard 12 volt (13 amp) power outlet lo...
Page 162
Note: • to ensure proper operation a mopar威 knob and element must be used. • do not exceed the maximum power of 160 watts (13 amps) at 12 volts. If the 160 watt (13 amp) power rating is exceeded the fuse protecting the system will need to be replaced. Warning! To avoid serious injury or death: • onl...
Page 163
Power inverter — if equipped a 115 volt (150 watt) ac power inverter is located on the front of the center console for added convenience. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 watts. Certain high-end video games, such as playstation3...
Page 164
Warning! To avoid serious injury or death: • do not use a three-prong adaptor. • do not insert any objects into the receptacles. • do not touch with wet hands. • close the lid when not in use. • if this outlet is mishandled, it may cause an electric shock and failure. Caution! • many accessories tha...
Page 165
Cupholders your vehicle is equipped with four cupholders. There are two illuminated cupholders located in the front. There are two cupholders located in the back for the rear passengers. Illuminated front cupholders rear cupholders 3 understanding the features of your vehicle 165.
Page 166
Storage glove compartment and storage bin located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. To open the lower glove compartment, pull outward on the release handle. 1 — upper storage bin 2 — lower glove compartment glove compartment 166 und...
Page 167
Door storage the interior door panels are equipped with lower storage areas. Front door storage rear door storage 3 understanding the features of your vehicle 167.
Page 168
Console features the floor console contains both an upper and lower storage compartment. To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open. To open the lower storage compartment, lift upward on the lower handle to unlatch the lower ...
Page 169
Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injur...
Page 170
To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Cargo cover the cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat. To install the cargo cover, insert either end ...
Page 171
Using the handle, pull the cover toward you and guide the rear cover posts into the guides located on both sides of the rear trim panel. Warning! In an accident a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store...
Page 172
Removable load floor the cargo area load floor is removable and can be washed with mild soap and water. Cargo tie-down loops there are four d-rings installed in the cargo area for securing cargo. Cargo load floor d-rings 172 understanding the features of your vehicle.
Page 173
Warning! • cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • the weight and position of cargo a...
Page 174
Fold down speakers — if equipped when the liftgate is open, the speakers can swing down off the trim panel to face rearward, for tailgating and other activities. Rear window features rear window wiper/washer the rear wiper/washer is controlled by a rotary switch located on the center portion of the ...
Page 175
Rotate the center portion of the lever upward to the “on” position to activate the rear wiper. Note: the rear wiper operates in an intermittent mode only. Rotate the center portion of the lever past the first detent to activate that rear washer. The washer pump will continue to operate as long as th...
Page 176
Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements....
Page 177
The optional crossbars must also be secured in one of the seven detent positions marked with an arrow on the siderails to prevent movement. To move the crossbars, loosen the thumb screws located at the upper edge of each crossbar approximately eight turns, then move the crossbar to the desired posit...
Page 178
Caution! (continued) • to avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 150 lbs (68 kg). Always distribute heavy loads as evenly as possible and secure the load appropri- ately. • long loads which extend over the windshield, such as wood panels or su...
Page 179: Contents
Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . 183 䡵 instrument cluster . . . . . . . . . . . . . . . . . . . . 184 䡵 instrument cluster descriptions . . . . . . . . . . . 185 䡵 electronic vehicle information center (evic) — if equipped . . . ....
Page 180
▫ operation instructions - (disc mode for cd and mp3/wma audio play, dvd-video) . . . 216 ▫ notes on playing mp3/wma files . . . . . . . 218 ▫ list button (disc mode for mp3/wma play) . . . . . . . . . 221 ▫ info button (disc mode for mp3/wma play) . . . . . . . . . 221 䡵 sales code (rer/ren/rbz) — ...
Page 181
▫ notes on playing mp3 files . . . . . . . . . . . . 244 ▫ list button (cd mode for mp3 play) . . . . . . 247 ▫ info button (cd mode for mp3 play) . . . . . . 247 䡵 universal consumer interface (uci) — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 ▫ connecting the ipod威 . ....
Page 182
▫ operating instructions — video entertainment system (ves)™ (if equipped) . . . . . . . . . . . . . . . . . . . . . . . 258 䡵 remote sound system controls — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 258 ▫ radio operation . . . . . . . . . . . . . . . . . . . . . 259 ▫ cd playe...
Page 183
Instrument panel features 1 — air outlet 5 — storage bin 9 — heated seat switch – if equipped 2 — demisters 6 — glove compartment 10 — hazard warning flasher 3 — instrument cluster 7 — climate controls 11 — esc off switch – if equipped 4 — radio 8 — power outlet 12 — heated seat switch – if equipped...
Page 184
Instrument cluster 184 understanding your instrument panel.
Page 185
Instrument cluster descriptions 1. Fuel gauge/fuel door reminder when the ignition switch is in the on position, the pointer will show the level of fuel remain- ing in the fuel tank. The fuel pump symbol points to the side of the vehicle where the fuel door is located. 2. Charging system light this ...
Page 186
4. Oil pressure warning light this light indicates low engine oil pressure. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on...
Page 187
10. Anti-lock brake (abs) light — if equipped this light monitors the anti-lock brake system (abs). The light will turn on when the ignition switch is turned to the on position and may stay on for as long as four seconds. If the abs light remains on or turns on while driving, it indicates that the a...
Page 188
Single chime will sound after reaching a set threshold. Further overheating will cause the temperature gauge to pass h , the indicator will continuously flash and a continuous chime will occur until the engine is allowed to cool. If the light turns on while driving, safely pull over and stop the veh...
Page 189
Note: the light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- tions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate repair is neces- sary. Warning! Driving a vehicle with the red brake l...
Page 190
Cools down enough to allow a return to the requested speed. If the high speed is maintained, the overheating will reoccur as before in a cyclic fashion. Caution! Continuous driving with the transmission tempera- ture warning light illuminated will eventually cause severe transmission damage or trans...
Page 191
Caution! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads “h” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “h” and you hear continuo...
Page 192
22. Tire pressure monitoring telltale light each tire, including the spare (if provided), should be checked monthly, when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (if your vehicle has tires of a diffe...
Page 193
Alternate tires or wheels on the vehicle that prevent the tpms from functioning properly. Always check the tpms malfunction telltale after replacing one or more tires or wheels on your vehicle, to ensure that the replacement or alternate tires and wheels allow the tpms to continue to function proper...
Page 194
Vehicle odometer messages when the appropriate conditions exist, the following odometer messages will display: door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door ajar gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gate ajar gascap . . . . . . . . . . . . . . . . . ...
Page 195
Turn the ignition switch to the on/run position. To turn off the message temporarily, press and release the trip odometer button on the instrument cluster. To reset the oil change indicator system (after performing the sched- uled maintenance), refer to the following procedure: 1. Turn the ignition ...
Page 196
Caution! Prolonged driving with the mil on could cause damage to the engine control system. It also could affect fuel economy and drivability. If the mil is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. Warning! A malfunctioning catalytic ...
Page 197
29. Electronic stability control (esc) malfunction indicator light — if equipped the “esc indicator light” in the instrument cluster will come on when the ignition switch is turned to the on position. It should go out with the engine running. If the “esc indicator light” comes on continuously with t...
Page 198
When lit solid: there is an 4wd system fault. 4wd performance will be at a reduced level. Service the 4wd system soon. When blinking: the 4wd system is temporarily dis- abled due to overload condition. 31. Electronic vehicle information center (evic) display — if equipped when the appropriate condit...
Page 199
The evic consists of the following: • system status • vehicle information warning message displays • personal settings (customer-programmable features) • compass heading • outside temperature display • trip computer functions • uconnect™ phone displays (if equipped) • audio mode display • tire press...
Page 200
• gate ajar (with a single chime) • headlamps or park lamps on • key in ignition • check tpm system engine oil change indicator system — if equipped oil change required your vehicle is equipped with an engine oil change indicator system. The “oil change required” message will flash in the evic displ...
Page 201
Evic functions press the evic button until one of the following func- tions is displayed on the evic: • compass/temperature/audio • average fuel economy • distance to empty (dte) • elapsed time • tire pressure monitor (tpm) • personal settings to reset the display pressing and holding the evic butto...
Page 202
Compass/temperature/audio press and release the evic button to display one of eight compass headings to indicate the direction the vehicle is facing, the outside temperature, and the current radio station. For additional information regarding the compass, refer to personal settings (customer-program...
Page 203
Elapsed time shows the total elapsed time of travel since the last reset when the ignition switch is in the acc position. Elapsed time will increment when the ignition switch is in the on or start position. Personal settings (customer-programmable features) this allows the driver to set and recall f...
Page 204
Position (automatic transmission). Press and hold the evic button when in this display until “on” or “off” appears to make your selection. Rke unlock driver’s door 1st when driver’s door 1st is selected only the driver’s door will unlock on the first press of the remote keyless entry (rke) transmitt...
Page 205
Power outlets will remain active for up to 10 minutes after the ignition switch has been turned off. Opening a vehicle door will cancel this feature. Press and hold the evic button when in this display until “off”, “45 sec.”, “5 min.”, or “10 min.” appears to make your selection. Illuminated approac...
Page 206
Large metal or metallic objects) until the “cal” message displayed in the evic turns off. The compass will now function normally. Note: a good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc...
Page 207
To set the variance with the ignition in the on position, quickly (less than one second) press and release the evic button several times until you have displayed the per- sonal settings (customer-programmable features) menu. Once in the personal settings (customer-programmable features) menu, press ...
Page 208
To indicate that the compass is now in the calibration mode, and that the vehicle can now be driven to calibrate. 5. To complete the compass calibration, drive the vehicle in one or more complete 360–degree circle under 5 mph (8 km/h) in an area free from power lines and large metallic objects, unti...
Page 209
Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Press the on/volume control knob a second time to turn off the radio. Electronic volume control the electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the ...
Page 210
If your vehicle is not equipped with or this feature is not available on your vehicle, a “not equipped with uconnect” message will display on the radio screen. Time button press the time button to alternate locations of the time and frequency display. Clock setting procedure 1. Press and hold the ti...
Page 211
Setting the tone, balance, and fade push the rotary tune/scroll control knob and bass will display. Turn the tune/scroll control knob to the right or left to increase or decrease the bass tones. Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control...
Page 212
Toggle the music type button to select the following format types: program type 16-digit character display no program type or undefined none adult hits adlt hit classical classicl classic rock cls rock college college country country foreign language language information inform jazz jazz news news n...
Page 213
Station with the same selected music type name. The music type function only operates when in the fm mode. If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the preset station. Setup button pressing the setup bu...
Page 214
Note: • the available selections for each of the above entries varies depending upon the disc. • these selections can only be made while playing a dvd. • ves™ power - allows you to turn ves™ on and off (if equipped). • ves™ lock - locks out rear ves™ remote controls (if equipped). • ves™ ch1/ch2 - a...
Page 215
Down and selecting ⬙other.⬙ enter the country code using the tune/scroll control knob to scroll up and down to select the number and then push to select. Subtitle language — if equipped selecting this item allows you to choose a default subtitle language (effective only if the language is supported ...
Page 216
Set button — to set the pushbutton memory when you are receiving a station that you wish to commit to pushbutton memory, press the set button. The symbol set 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station and press and release that button. If a butt...
Page 217
Caution! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “disc hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the dvd player and other radio internal components. Note: the ignition switch m...
Page 218
Seek button (cd mode) press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the first second of the current selection. Pressing and holding...
Page 219
The radio uses the following limits for file systems: • maximum number of directory levels: 8 • maximum number of files: 255 • maximum number of folders: 100 • maximum number of characters in file/folder names: • level 1: 12 (including a separator ⬙.⬙ and a three- character extension) • level 2: 31 ...
Page 220
Mpeg specification sampling frequency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48 wma specification sampling frequency (khz) bit rate (kbps) wma 44.1 and 48 48,...
Page 221
List button (disc mode for mp3/wma play) pressing the list button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the tune/scroll control knob. Selecting a folder by pressing the tune/scroll control knob will begin playing the files contained in that...
Page 222
Scan button (auxiliary mode) no function. Eject button (auxiliary mode) no function. Time button (auxiliary mode) press the time button to change the display from elapsed playing time to time of day. The time of day will display for five seconds. Rw/ff (auxiliary mode) no function. Set button (auxil...
Page 223
Dolby 威 manufactured under license from dolby 威 laboratories. ⬙dolby威⬙ and the double-d symbol are trademarks of dolby 威 laboratories. Macrovision this product incorporates copyright protection technol- ogy that is protected by u.S. Patents and other intellec- tual property rights. Use of this copyr...
Page 224
Operating instructions — uconnect™ phone — if equipped refer to “uconnect™ phone” in section 3. Clock setting procedure — rbz radio to manually set the clock 1. Turn on the radio. 2. Touch the screen where the time is displayed, the clock setting menu will appear on the screen. 3. To move the hour f...
Page 225
Show time if radio is off when selected, this feature will display the time of day on the touch screen when the radio is turned off. Proceed as follows to change the current setting: 1. Turn on the radio. 2. Touch the screen where the time is displayed. The clock setting menu will appear on the scre...
Page 226
To manually set the clock — rer/ren 1. Turn on the radio. 2. Touch the screen where the time is displayed. 3. Touch the screen where “user clock” is displayed, the clock setting menu will appear on the screen. 4. To move the hour forward, touch the screen where the word “hour” with the arrow pointin...
Page 227
Show time if radio is off when selected, this feature will display the time of day on the touch screen when the radio is turned off. Proceed as follows to change the current setting: 1. Turn on the radio. 2. Touch the screen where the time is displayed. 3. Touch the screen where “user clock” is disp...
Page 228
Sales code res — am/fm stereo radio with cd player (mp3 aux jack) note: the radio sales code is located on the lower right side of the radio faceplate. Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (r...
Page 229
Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...
Page 230
Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the rig...
Page 231
And 12 fm stations to be stored into pushbutton memory. The stations stored in set 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the stations that you commit to ...
Page 232
Caution! • this cd player will accept 4-3/4 in (12 cm) discs only. The use of other sized discs may damage the cd player mechanism. • do not use adhesive labels. These labels can peel away and jam the player mechanism. • res is a single cd player. Do not attempt to insert a second cd if one is alrea...
Page 233
Rw/ff press and hold the ff (fast forward) button and the cd player will begin to fast forward until ff is released, or rw or another cd button is pressed. The rw (reverse) button works in a similar manner. Am/fm button press the button to select either am or fm mode. Set/rnd button (random play but...
Page 234
• maximum number of files: 255 • maximum number of folders. (the radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a number instead. With a maximum number of files, exc...
Page 235
Mpeg specification sampling frequency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title, and alb...
Page 236
Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack, which allows the user to plug in a portable device, such as an mp3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the dis...
Page 237
Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume cont...
Page 238
If your vehicle is not equipped with or this feature is not available on your vehicle, a “not equipped with uconnect” message will display on the radio screen. Time button press the time button to alternate display of the time and radio frequency. Clock setting procedure 1. Press and hold the time b...
Page 239
Tune control turn the rotary tune/scroll control knob clockwise to increase or counterclockwise to decrease the frequency. Setting the tone, balance, and fade push the rotary tune/scroll control knob and bass will display. Turn the tune/scroll control knob to the right or left to increase or decreas...
Page 240
Toggle the music type button to select the following format types: program type 16-digit character display no program type or undefined none adult hits adlt hit classical classicl classic rock cls rock college college country country foreign language language information inform jazz jazz news news n...
Page 241
Station with the same selected music type name. The music type function only operates when in the fm mode. If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the preset station. Setup button pressing the setup bu...
Page 242
And 12 fm stations to be stored into pushbutton memory. The stations stored in set 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the stations that you commit to ...
Page 243
Caution! • this cd player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the cd player mechanism. • do not use adhesive labels. These labels can peel away and jam the player mechanism. • res is a single cd player. Do not attempt to insert a second cd if one is alrea...
Page 244
Rw/ff press and hold ff (fast forward) and the cd player will begin to fast forward until ff is released or rw or another cd button is pressed. The rw (reverse) button works in a similar manner. Am/fm button press the button to select either am or fm mode. Set/rnd button (random play button) press t...
Page 245
• maximum number of files: 255 • maximum number of folders. (the radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead. With a maximum number of files, exce...
Page 246
Mpeg specification sampling frequency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title, and alb...
Page 247
List button (cd mode for mp3 play) pressing the list button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the tune/scroll control knob. Selecting a folder by pressing the tune/scroll control knob will begin playing the files contained in that folde...
Page 248
Time button (auxiliary mode) press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is off). Operating instructions - uconnect™ phone (if equipped) refer to “uconnect™ phone” in section 3. Operating instructions - uconnect™ studios (s...
Page 249
Connecting the ipod 姞 use the provided connection cable to connect an ipod 威 to the vehicle’s 16–pin connector port (which is located in the glove compartment on some vehicles). Once the ipod 威 is connected and synchronized to the vehicle’s uci system (ipod 威 may take a few seconds to connect), the ...
Page 250
Play mode when switched to uci mode, the ipod 威 automatically starts play mode. In play mode, you may use the following buttons on the radio faceplate to control the ipod 威 and display data: • use the tune control knob to select the next or previous track. • turning it clockwise (forward) by one cli...
Page 251
Seen all screens, the last info button press will take you back to the play mode screen on the radio. • pressing the repeat button will change the ipod威 mode to repeat the current playing track. • press the scan button to use ipod威 scan mode, which will play the first five seconds of each track in t...
Page 252
• in list mode, the radio preset buttons are used as shortcuts to the following lists on the ipod 威. • preset 1 – playlists • preset 2 – artists • preset 3 – albums • preset 4 – genres • preset 5 - audiobooks • preset 6 – podcasts • pressing a preset button will display the current list on the top l...
Page 253
Caution! (continued) • placing items on the ipod威, or connections to the ipod 威 in the vehicle, can cause damage to the device and/or to the connectors. Warning! Do not plug in or remove the ipod 威 while driving. Failure to follow this warning could result in an accident. Uconnect™ studios (satellit...
Page 254
Electronic serial number/sirius identification number (esn/sid) please have the following information available when calling: 1. The electronic serial number/sirius identification number (esn/sid). 2. Your vehicle identification number. To access the esn/sid, refer to the following steps: esn/sid ac...
Page 255
Satellite antenna to ensure optimum reception, do not place items on the roof around the rooftop antenna location or strap items to the trunk lid around the trunk lid antenna (if equipped). Metal objects placed within the line of sight of the antenna will cause decreased performance. Larger lug- gag...
Page 256
Scan button (when equipped) pressing the scan button causes the tuner to search for the next channel, pausing for eight seconds before con- tinuing to the next. To stop the search, press the scan button a second time. Info button — except reu radio pressing the info button will cycle the display inf...
Page 257
If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the preset channel. Music type button — reu radio pressing this button provides a music type list from which you can make a selection. Once a selection is made, ...
Page 258
Buttons 1 - 6 these buttons tune the radio to the channels that you commit to pushbutton memory (12 satellite stations). Operating instructions — uconnect™ phone (if equipped) refer to “uconnect™ phone” in section 3. Operating instructions — video entertainment system (ves)™ (if equipped) refer to s...
Page 259
The button located in the center of the right-hand control will switch modes to radio or cd. The left-hand control is a rocker type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in. The following describes the left-hand con...
Page 260
2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzene, thinner, cleaners, or anti-static sprays. 5. Store the disc in its case after playing. 6. Do not...
Page 261
Manual heating and air conditioning the manual temperature controls consist of a series of outer rotary dials and inner push knobs. Blower control rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control...
Page 262
Temperature control rotate this control to regulate the tem- perature of the air inside the passenger compartment. Rotating the dial left into the blue area of the scale indicates cooler temperatures while rotating right into the red area indicates warmer tem- peratures. Note: if your air conditioni...
Page 263
Bi-level air is directed through the panel and floor outlets. Note: for all settings except full cold or full hot, there is a difference in temperature between the upper and lower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but cool conditions...
Page 264
Note: • continuous use of the recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. • the use of the recirculation mode in cold or damp weather will cause windows to fog on the inside, because of moisture buildup inside the vehi...
Page 265
Automatic temperature control (atc) — if equipped automatic operation the automatic temperature control system automati- cally maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger. Operation of the system is quite simple. 1. Turn the mode contro...
Page 266
The recommended setting for maximum comfort for the average person is 72°f (22°c); however, this may vary. Note: • the temperature setting can be adjusted at anytime without affecting automatic operation. • pressing the air conditioning control button while in auto mode will cause the led in the con...
Page 267
Understanding your instrument panel 267.
Page 268
The operator can override the auto mode setting to change airflow distribution by rotating the mode control knob (on the right) to one of the following positions. • panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. Note: the center in...
Page 269
• air conditioner control press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the mode control dial. Press this but- ton a second time to turn off the air conditionin...
Page 270
• most of the time, when in automatic operation, you can temporarily put the system into recirculation mode by pressing the recirculation button. However, under certain conditions, while in automatic mode, the system is blowing air out the defrost vents. When these conditions are present, and the re...
Page 271
Window fogging interior fogging on the windshield can be quickly re- moved by turning the mode selector to defrost. The defrost/floor mode can be used to maintain a clear windshield and provide sufficient heating. If side win- dow fogging becomes a problem, increase blower speed. Vehicle windows ten...
Page 272
Control setting suggestions for various weather conditions 272 understanding your instrument panel.
Page 273: Starting And Operating
Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 278 ▫ manual transaxle — if equipped . . . . . . . . . 278 ▫ automatic transaxle — if equipped . . . . . . . 278 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 279 ▫ extreme cold weather (below...
Page 274
䡵 autostick威 — if equipped . . . . . . . . . . . . . . . 286 ▫ operation . . . . . . . . . . . . . . . . . . . . . . . . . 287 ▫ general information . . . . . . . . . . . . . . . . . . 287 䡵 four-wheel drive operation — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 288 䡵 driving on...
Page 275
䡵 electronic brake control system . . . . . . . . . . . 308 ▫ anti-lock brake system (abs) . . . . . . . . . . . 308 ▫ brake assist system (bas) . . . . . . . . . . . . . . 309 ▫ traction control system (tcs) . . . . . . . . . . . 310 ▫ electronic roll mitigation (erm) . . . . . . . . . 310 ▫ hill d...
Page 276
䡵 tire pressure monitoring system (tpms) . . . . . 335 ▫ base system . . . . . . . . . . . . . . . . . . . . . . . . 338 ▫ premium system — if equipped . . . . . . . . . 340 ▫ general information . . . . . . . . . . . . . . . . . . 343 䡵 fuel requirements . . . . . . . . . . . . . . . . . . . . . 34...
Page 277
▫ trailer and tongue weight . . . . . . . . . . . . 356 ▫ towing requirements . . . . . . . . . . . . . . . . 357 ▫ towing tips . . . . . . . . . . . . . . . . . . . . . . . 362 䡵 recreational towing (behind motorhome, etc.) . . . . . . . . . . . . . . . . 364 ▫ towing this vehicle behind another ve...
Page 278
Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ou...
Page 279
Do not press the accelerator. Turn the ignition switch to the start position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically i...
Page 280
If engine fails to start if the engine fails to start after you have followed the “normal starting” and “extreme cold weather” proce- dures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there. Crank the engine for no more than 15 seconds. This should clear any e...
Page 281
Warning! Remember to disconnect the cord before driving. Damage to the 110-115 volt electrical cord could cause electrocution. Manual transaxle — if equipped five–speed manual transaxle warning! You or others could be injured if you leave the vehicle unattended without having the parking brake fully...
Page 282
Use each gear in numerical order, do not skip a gear. Be sure the transaxle is in first gear, (not third), when starting from a standing position. Damage to the clutch can result from starting in third gear. For most city driving, you will find it easier to use only the lower gears. For steady highw...
Page 283
Caution! If you skip more than one gear while downshifting or downshift at too high a vehicle speed, you could damage the engine, transmission, or clutch. To maintain a safe speed and prolong brake life, shift down to second or first gear when descending a steep grade. When turning a corner or drivi...
Page 284
Warning! It is dangerous to move the shift lever out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only s...
Page 285
Gear ranges do not race the engine when shifting from park or neutral positions into another gear range. Park this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never use park while the vehicle is in motion. Apply the parking brake when lea...
Page 286
• look at the shift indicator window on the shift lever bezel to ensure it is in the park position. • you must press the brake pedal to move the shift lever out of the park position. Caution! Before moving the shift lever out of park, you must turn the ignition from lock to on so the steering wheel ...
Page 287
And/or the engine from overspeed. Changes down will only happen at minimum engine speed to prevent stall- ing. Operation note: autostick 威 is not functional until the cvt warms up in cold weather. Autostick 威 operation is activated in the drive position by moving the shift lever side-to-side. Moving...
Page 288
• if a downshift would cause the engine to overspeed, that shift will not occur until it is safe for the engine. However. The cvt will stay in the manually selected ratio. • if the system detects powertrain overheating, the transmission will revert to the automatic shift mode and remain in that mode...
Page 289
Cluster. This can be done on the fly, at any vehicle speed. To deactivate, simply pull on the switch one more time. The “4wd indicator light” will then go out. Note: refer to electronic stability control (esc) in the “electronic brake control system” section of this manual for additional information...
Page 290
2. Slow down if the road has standing water or puddles. 3. Replace the tires when tread wear indicators first become visible. 4. Keep the tires properly inflated. 5. Maintain enough distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. Driving through w...
Page 291
Caution! • always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • determine the condition of the road or the path that is under water and if there are any obstacles in the wa...
Page 292
Warning! • driving through standing water limits your vehi- cle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • driving through standing water limits your vehi- cle’s braking capabilities, which increases stop- ping distances. Therefore, after driving thr...
Page 293
Off-road driving tips you will encounter many types of terrain driving off- road. You should be familiar with the terrain and area before proceeding. There are many types of surface conditions: hard packed dirt, gravel, rocks, grass, sand, mud, snow and ice. Every surface has a different effect on y...
Page 294
Off-road) with 4wd lock engaged will allow the engine to operate in a higher power range. This will allow you to cross over obstacles and descend hills, with improved control and less effort. Note: for maximum off-road performance, premium fuel is recommended. While the vehicle will operate on regul...
Page 295
Mud deep mud creates a great deal of suction around the tires and is very difficult to get through. You should use low (l off-road) with the 4wd lock engaged and maintain your momentum. If you start to slow to a stop, try turning your steering wheel no more than a 1/4 turn quickly back and forth for...
Page 296
Hill climbing hill climbing requires good judgment and a good under- standing of your abilities and your vehicle’s limitations. Hills can cause serious problems. Some are just too steep to climb and should not be attempted. You should always feel confident with the vehicle and your abilities. You sh...
Page 297
Warning! Never attempt to climb a hill at an angle or turn around on a steep grade. Driving across an incline increases the risk of a rollover, which may result in severe injury. Driving down hill before driving down a steep hill you need to determine if it is too steep for a safe descent. What is t...
Page 298
If you stall or begin to lose headway if you stall or begin to lose headway while climbing a steep hill, allow your vehicle to come to a stop and immediately apply the brake. Restart the engine and shift to reverse. Back slowly down the hill allowing engine and hill descent braking to control the de...
Page 299
Bottom of the axle differentials, you should inspect all of the vehicle fluids for signs of water ingestion. Caution! Water ingestion into the transaxle, transfer case, engine or vehicle interior can occur if you drive too fast or through too deep of water. Water can cause permanent damage to engine...
Page 300
Caution! Muddy waters can reduce the cooling system effec- tiveness by depositing debris onto the radiator. After driving off-road off-road operation puts more stress on your vehicle than does most on-road driving. After driving off-road, it is always a good idea to check for damage. • completely in...
Page 301
Warning! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. You might not have full braking power when you need it to prevent an accident. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary. Failur...
Page 302
Warning! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. Caution! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature an...
Page 303
If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “fluids, lubricants, and genuine parts” in section 7 for the correct fluid type. Parking brake before leaving the vehicle, make sure that the parking brake is full...
Page 304
Note: • when the parking brake is applied and the automatic transaxle is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • this light only shows that the...
Page 305
Caution! If the brake system warning light remains on with the parking brake released, a brake system malfunc- tion is indicated. Have the brake system serviced by an authorized dealer immediately. Brake system your vehicle is equipped with power assisted brakes as standard equipment. In the event p...
Page 306
Warning! Driving a vehicle with the “brake warning light” on is dangerous. A significant decrease in braking per- formance or vehicle stability during braking may occur. It will take you longer to stop the vehicle or will make your vehicle harder to control. You could have an accident. Have the vehi...
Page 307
Warning! (continued) • the capabilities of an abs-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others. The “abs warning light” monitors the abs system. The light will come on when the ignition switch is turned to...
Page 308
You may also experience the following when the brake system goes into anti-lock mode: • the abs motor running (it may continue to run for a short time after the stop) • the clicking sound of solenoid valves • brake pedal pulsations • a slight drop or fall away of the brake pedal at the end of the st...
Page 309
Help avoid skidding on slippery surfaces during braking. Refer to “anti-lock brake system” in this section of the manual for more information about abs. Brake assist system (bas) the bas is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects a...
Page 310
Traction control system (tcs) this system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the tcs system functions si...
Page 311
Warning! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or roll over may occur. Erm cannot prevent all wheel lift or roll overs, especially those that involve leaving the roadway or striking objects or other vehicles. Only a safe...
Page 312
Hdc operation can be overridden with brake application to slow the vehicle down below the hdc control speed. Conversely, if more speed is desired during hdc control, the accelerator pedal will increase vehicle speed like normal. When either the brake or the accelerator is released, hdc will control ...
Page 313
• gear selection matches vehicle uphill direction (i.E., vehicle facing uphill is in forward gear; vehicle back- ing uphill is in reverse gear). Warning! There may be situations on minor hills (i.E., less than 8%), with a loaded vehicle, or while pulling a trailer, when the system will not activate ...
Page 314
8. Rotate the steering wheel back to center and then an additional half-turn to the right. 9. Turn the ignition switch to the off position and then back to the on position. If the sequence was completed properly, the “esc off indicator light” will blink several times to confirm hsa is disabled. 10. ...
Page 315
Warning! • the electronic stability control (esc) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • esc cannot prevent accidents, including those resulting from excessive speed in turns, driving on very...
Page 316
• the esc system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when esc becomes inactive following the maneuver that caused the esc activation. Esc operating modes the esc system has three available operating modes for four-wheel drive equipped vehicles...
Page 317
Full off (four-wheel drive models only) this mode is intended for off-highway or off-road use when esc stability features could inhibit vehicle maneu- verability due to trail conditions. This mode is entered by pressing and holding the “esc off” switch for five seconds when the vehicle is stopped an...
Page 318
Tire safety information tire markings note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standar...
Page 319
Tires designed to this standard have the letter “t” molded into the sidewall preceding the size designa- tion. Example: t145/80d18 103m. • high flotation tire sizing is based on u.S. Design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 r15 lt. Tire sizing ...
Page 320
Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...
Page 321
Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...
Page 322
Tire loading and tire pressure tire placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar. Tire and loading information placard this placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total wei...
Page 323
Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the tire and loading informati...
Page 324
4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “xxx” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 ...
Page 325
Starting and operating 325.
Page 326
Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...
Page 327
Warning! (continued) • unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns...
Page 328
Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.” cold tire infl...
Page 329
Tire pressures for high speed operation the manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and ...
Page 330
Warning! • temporary use spare tires are for emergency use only. With these tires, do not drive more than 50 mph (80 km/h). • temporary use spare tires have limited tread life. When the tread is worn to the tread wear indica- tors, the temporary use spare tire needs to be replaced. • be sure to foll...
Page 331
Warning! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and d...
Page 332
Life of tire the service life of a tire is dependent upon varying factors including, but not limited to: • driving style • tire pressure • distance driven warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can resul...
Page 333
Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...
Page 334
Caution! Damage to the vehicle may result if tire chains are used. Snow tires some areas of the country require the use of snow tires during winter. Standard tires are of the all-season type and satisfy this requirement as indicated by the m+s designation on the tire sidewall. If you need snow tires...
Page 335
The suggested rotation method is shown in the following diagram. Tire pressure monitoring system (tpms) the tire pressure monitor system (tpms) will warn the driver of a low tire pressure based on the vehicle recom- mended cold placard pressure. The tire pressure will vary with temperature by about ...
Page 336
The tpms will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects, or natural pressure loss through the tire. The tpms will continue to warn the driver of low tire pressure as long as the condition e...
Page 337
Caution! • the tpms has been optimized for the original equipment tires and wheels. Tpms pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, ...
Page 338
• seasonal temperature changes will affect tire pressure, and the tpms will monitor the actual tire pressure in the tire. Base system this is the tpms warning indicator located in the instrument cluster. The tpms uses wireless technology with wheel rim mounted electronic sensors to monitor tire pres...
Page 339
Fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The tire pressure monitoring telltale light will turn off when the fault condition no longer exists. A system fault can occur with any of the...
Page 340
5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the tpms will update automatically and the tire pressure monitoring telltale light will turn off, as long as no tire pressure is below the low-pressure warning limit in any of the...
Page 341
Every ignition cycle for each condition that it detects. In addition, the evic will display a graphic of the pressure value(s) with the low tire(s) flashing. Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible and inflate all tires that are f...
Page 342
The pressure value(s) indicating which tire pressure monitoring sensor(s) is not being received. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the tire pressure monitoring telltale light will no longer flash, ...
Page 343
2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limit, upon the next ignition key cycle, a chime will sound and the tire pressure monitoring telltale light will still turn on due to the low tire. 3. However, after driving the vehicl...
Page 344
The tire pressure sensors are covered under one of the following licenses: united states . . . . . . . . . . . . . . . . . . . . . Kr5s120123 canada . . . . . . . . . . . . . . . . . . . . . . . . 2671-s120123 fuel requirements your vehicle is designed to meet all emis- sion regulations and provide ...
Page 345
Gasoline/oxygenate blends some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, mtbe, and etbe. Oxygen- ates are required in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your ve...
Page 346
To fix a non-ffv vehicle inadvertently fueled once with e-85 perform the following: • drain the fuel tank (see your authorized dealer) • change the engine oil and oil filter • disconnect and reconnect the battery to reset the engine controller memory more extensive repairs will be required for prolo...
Page 347
Fuel system cautions caution! Follow these guidelines to maintain your vehicle’s performance: • the use of leaded gas is prohibited by federal law. Using leaded gasoline can impair engine perfor- mance and damage the emission control system. • an out-of-tune engine, or certain fuel or ignition malfu...
Page 348
Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such ...
Page 349
After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door. This keeps the gas cap suspended away from and protects the vehicle’s surface. Caution! • damage to the fuel system or emission control system could result from using an improper fuel tank filler c...
Page 350
Warning! (continued) • never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the mil to turn on. • a fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas...
Page 351
Vehicle certification label your vehicle has a vehicle certification label attached to the driver’s door b-pillar. The label contains the following information: • name of manufacturer • month and year of manufacture • gross vehicle weight rating (gvwr) • vehicle identification number (vin) • type of...
Page 352
Curb weight the curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a comm...
Page 353
Trailer towing in this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible. To maintain warranty coverage, follow t...
Page 354
Warning! It is important that you do not exceed the maximum front or rear gawr. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. Tongue weight (tw) the tongue weight is the downward force exerted on the hitch ball by t...
Page 355
Safety. The addition of a friction/hydraulic sway control also dampens sway caused by traffic and crosswinds and contributes positively to tow vehicle and trailer stability. Trailer sway control and a weight distributing (load equalizing) hitch are recommended for heavier tongue weights (tw) and may...
Page 356
Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/transmission frontal area max. Gtw (gross trailer wt.) max. Tongue wt. (see note 1) 2.0l auto/man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) ...
Page 357
Consider the following items when computing the weight on the rear axle of the vehicle: • the trailer tongue weight of the trailer. • the weight of any other type of cargo or equipment put in or on your vehicle. • the weight of the driver and all passengers. Note: remember that everything put into o...
Page 358
Perform the maintenance listed in the “maintenance schedule.” refer to section 8 of this manual. When towing a trailer, never exceed the gawr, or gcwr, ratings. Warning! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • make ce...
Page 359
Warning! (continued) • total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. Gvwr 2. Gtw 3. Gawr 4. Tongue weight rating for the trailer hitch uti- lized (this requirement may limit the ability to always achieve the 10% to ...
Page 360
Towing requirements – trailer brakes − do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. − an electronically actuated trailer brake controller is required when towing a trailer w...
Page 361
Towing requirements – trailer lights and wiring whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. The trailer tow package may include a four- and seven- pin wiring harness. Use a factory approved trailer har- ne...
Page 362
Towing tips before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic transaxle the automatic transaxle fluid and filter should be changed if you regularly tow a trailer for more than 45 minutes of continuous operation. Refer to th...
Page 363
Electronic speed control – if equipped − do not use in hilly terrain or with heavy loads. − when using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − use speed control in flat terrain and with light loads to maxim...
Page 364
Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle (flat towing with all four wheels on the ground) recreational towing condition manual trans- axle vehicles automatic transaxle vehicles four wheel flat tow (all wheels on ground) yes never two wheel dolly tow (fr...
Page 365: Contents
What to do in emergencies contents 䡵 hazard warning flasher . . . . . . . . . . . . . . . . 366 䡵 if your engine overheats . . . . . . . . . . . . . . . . 366 䡵 automatic transaxle overheating . . . . . . . . . . 367 䡵 jacking and tire changing . . . . . . . . . . . . . . . 368 ▫ jack location . . ....
Page 366
Hazard warning flasher the hazard warning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press the s...
Page 367
Note: there are steps that you can take to slow down an impending overheat condition: • if your air conditioner (a/c) is on, turn it off. The a/c system adds heat to the engine cooling system and turning the a/c off can help remove this heat. • you can also turn the temperature control to maximum he...
Page 368
Jacking and tire changing warning! • being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need t...
Page 369
Preparations for jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel...
Page 370
Warning! (continued) • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • block the wheel diagonally opposite the wheel to be raised. • set the parking brake firmly and set an automatic transmission in park; a manual transmission in rev...
Page 371
2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground. Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in step 3. 3. There are two front jacking locations and two rear jacking locations...
Page 372
Warning! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench. Raise the vehicle only unt...
Page 373
10. Place the deflated (flat) tire in the cargo area. Have the tire repaired or replaced as soon as possible. Warning! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immedi- ately. 11. Check the ti...
Page 374
Warning! (continued) • a battery generates hydrogen gas which is flam- mable and explosive. Keep flame or spark away from the vent holes. Do not lean over battery when attaching clamps or allow the clamps to touch each other. • do not use a booster battery or any other booster source that has a grea...
Page 375
4. Connect one end of a jumper cable to the positive terminal of the booster battery. Connect the other end of the jumper cable to the positive terminal of the dis- charged battery. Warning! Do not connect the cable to the negative post of the discharged battery. The resulting electrical spark could...
Page 376
Freeing a stuck vehicle if your vehicle becomes stuck in mud, sand or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between re- verse and 1st gear. Using minimal accelerator pedal pressure...
Page 377
Towing a disabled vehicle with ignition key automatic transaxle • front wheel drive (fwd) vehicles can be towed with the front wheels elevated or on a flatbed truck (all four wheels off the ground). • all wheel drive (awd) vehicles must be towed on a flatbed truck (all four wheels off the ground). C...
Page 378
Caution! • if the vehicle being towed requires steering, the ignition switch must be in the acc position, not in the lock position. • do not attempt to use sling-type equipment when towing. When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to ...
Page 379: Maintaining Your Vehicle
Maintaining your vehicle contents 䡵 engine compartment — 2.0l . . . . . . . . . . . . . 381 䡵 engine compartment — 2.4l . . . . . . . . . . . . . 382 䡵 onboard diagnostic system — obd ii . . . . . . 383 ▫ loose fuel filler cap message . . . . . . . . . . . 383 䡵 emissions inspection and maintenance ...
Page 380
▫ exhaust system . . . . . . . . . . . . . . . . . . . . . 394 ▫ cooling system . . . . . . . . . . . . . . . . . . . . . 397 ▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 402 ▫ automatic transaxle (cvt) – if equipped . . . 404 ▫ manual transaxle – if equipped . . . . . . . . . . 405 ...
Page 381
Engine compartment — 2.0l 1 — washer fluid reservoir 6 — integrated power module 2 — power steering fluid reservoir 7 — battery (under cover) 3 — engine oil fill 8 — coolant pressure cap 4 — air cleaner filter 9 — engine oil dipstick 5 — brake fluid reservoir 10 — engine coolant reservoir 7 maintain...
Page 382
Engine compartment — 2.4l 1 — washer fluid reservoir 6 — battery (under cover) 2 — power steering fluid reservoir 7 — air cleaner filter 3 — engine oil fill 8 — coolant pressure cap 4 — brake fluid reservoir 9 — engine oil dipstick 5 — integrated power module 10 — engine coolant reservoir 382 mainta...
Page 383
Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems are oper- ating properly, your vehicle will provide exc...
Page 384
Persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the mil. Resolving the problem will turn the mil light off. Emissions inspection and maintenance programs in some localities, ...
Page 385
5. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m...
Page 386
Your vehicle. Refer to these manuals before attempting any procedure yourself. Note: intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. Warning! You can be badly injured working on or around a motor vehicle. Onl...
Page 387
Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or ...
Page 388
Caution! Do not overfill the engine. Overfilling the engine as indicated by the range markings, as described above, on the engine oil dipstick will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change engine oil the oil ...
Page 389
Caution! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the new vehicle limited warranty. Engine oil viscosity (sae grade) sae 5w-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperatu...
Page 390
Engine oil filter the engine oil filter should be replaced at every engine oil change. Engine oil filter selection all of this manufacturer’s engines have a full-flow type disposable oil filter. Use a filter of this type for replace- ment. The quality of replacement filters varies consider- ably. On...
Page 391
Warning! • battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water. •...
Page 392
Air conditioner maintenance for best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at thi...
Page 393
Refrigerant recovery and recycling r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency and is an ozone-saving product. How- ever, the manufacturer recommends that air conditioning service be performed by authorized dealers or oth...
Page 394
Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen t...
Page 395
If you notice a change in the sound of the exhaust system, or if exhaust fumes can be detected inside the vehicle or when the underside or rear of the vehicle is damaged, have a competent technician inspect the complete ex- haust system and adjacent body areas for broken, dam- aged, deteriorated, or...
Page 396
Caution! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued opera- tion of your vehicle...
Page 397
Cooling system warning! • when working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the off position. The fan is temperature controlled and can start at any time the ignition switch is in the on position. • you or others can be badly burned by hot coo...
Page 398
Selection of coolant refer to “fluids, lubricants, and genuine parts” in this section for the correct fluid type. Caution! • mixing of engine coolant (antifreeze) other than specified hybrid organic additive technology (hoat) engine coolant (antifreeze), may result in engine damage and may decrease ...
Page 399
Vehicle. Please review these recommendations for using hybrid organic additive technology (hoat) engine coolant (antifreeze). When adding engine coolant (antifreeze), a minimum solution of 50% recommended mopar 威 antifreeze/ coolant 5 year/100,000 mile formula hoat (hybrid organic additive technolog...
Page 400
Warning! • the warning words “do not open hot” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To p...
Page 401
Long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to remember note: when the vehicle is ...
Page 402
• keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. • do not change the thermostat for summer or winter operation. If replacement is ever necessary, install only the correct type thermostat. Other designs may result in uns...
Page 403
When the pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed. Note: if your vehicle is equipped with a manual transaxle , the brake fluid reservoir supplies fluid to both the brake system and the clutch release system. The two systems are separated in the ...
Page 404
Warning! (continued) • overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts, causing the brake fluid to catch fire. Brake fluid can also damage painted and vinyl surfaces, care should be taken to avoid its contact with these surfaces. • do not allow petroleum ...
Page 405
Fluid level check the fluid level in the automatic transaxle should be checked only by a trained technician. Fluid and filter changes refer to the “maintenance schedule” in section 8 for the proper maintenance intervals. Special additives do not add any materials (other than leak detection dyes) to ...
Page 406
Note: if contaminated with water, the fluid should be changed immediately. Rear drive assembly (rda) – awd/4wd models only lubricant selection use only the manufacturer’s recommended fluid. Refer to “fluids, lubricants, and genuine parts” in this section for the correct fluid type. Fluid level check...
Page 407
Frequency of fluid change refer to the “maintenance schedule” in section 8 for the proper maintenance intervals. Appearance care and protection from corrosion protection of body and paint from corrosion vehicle body care requirements vary according to geo- graphic locations and usage. Chemicals that...
Page 408
• if insects, tar or other similar deposits have accumu- lated on your vehicle, use mopar 威 super kleen bug and tar remover or equivalent to remove. • use a high quality cleaner wax, such as mopar威 cleaner wax to remove road film, stains and to protect your paint finish. Take care never to scratch t...
Page 409
• if you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • if a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • use mopar威 touch up paint or equivalent on scratches as soon as...
Page 410
Interior care use mopar 威 total clean or equivalent to clean fabric upholstery and carpeting. Use mopar 威 total clean or equivalent to clean vinyl upholstery. Mopar 威 total clean or equivalent is specifically recom- mended for leather upholstery. Your leather upholstery can be best preserved by regu...
Page 411
Glass surfaces all glass surfaces should be cleaned on a regular basis with mopar 威 glass cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the inside rear win- dow equipped with electric defrosters or the right rear quarter window ...
Page 412
Seat belt maintenance do not bleach, dye or clean the seat belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the seat belts from the car to ...
Page 413
Cav- ity cartridge fuse mini- fuse description 8 30 amp green iod sense2 9 40 amp green power seats 10 20 amp yellow ccn power locks/ interior lighting 11 15 amp lt blue power outlet 12 20 amp yellow ign run/acc inverter 13 20 amp yellow pwr run/acc outlet rr/dome lamp/cigar lighter 14 10 amp red io...
Page 414
Cav- ity cartridge fuse mini- fuse description 23 15 amp lt blue eng asd relay feed 3 24 15 amp lt blue power sunroof feed 25 10 amp red heated mirror – if equipped 26 15 amp lt blue eng asd relay feed 2 27 10 amp red ign run only orc feed 28 10 amp red ign run orc/ocm feed 29 hot car (no fuse requi...
Page 415
Caution! • when installing the ipm cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the ipm, and possibly result in an electrical system failure. • when replacing a blown fuse, it is important to use only a fuse having ...
Page 416
Lights bulbs — exterior bulb no. Low beam/high beam headlamp . . . . . . . . . . . . H13 front park/turn signal/side marker lamp . . . 3757ka front fog lamp . . . . . . . . . . . . . . . . . . . . . . Psx24w center high mounted stop lamp (chmsl) . . . . . . . . . . . . . . . . . . . . . . Led assemb...
Page 417
2. Reach into engine compartment and pull red lock out at connector. 3. Remove the green connector from the back of the bulb by pulling straight back. 7 maintaining your vehicle 417.
Page 418
4. Twist the bulb to the left. 5. Pull bulb outward from assembly. Note: these are halogen bulbs. Take care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life. Fog lamps see your authorized dealer for replacement. 418 maint...
Page 419
Tail lamps, rear turn signals and backup lamps 1. Remove the two push-pins from the taillamp housing. 2. Grasp the taillamp and pull firmly to disengage the light from the aperture panel. 3. Twist and remove socket from the light. 4. Remove bulb from socket and replace. License lamps 1. Use a screw ...
Page 420
2. Rotate the socket 1/4 turn counterclockwise. 3. Pull the bulb from the socket. Center high-mounted stoplamp light is an led assembly. See your authorized dealer for replacement. 420 maintaining your vehicle.
Page 421
Fluid capacities u.S. Metric fuel (approximate) 13.6 gallons 51.5 liters engine oil with filter 2.0l and 2.4l engine (sae 5w-20, api certified) 4.5 quarts 4.26 liters cooling system * 2.0l and 2.4l engine (mopar 威 engine coolant/antifreeze 5 year/100,000 mile formula or equivalent) 7.2 quarts 6.8 li...
Page 422
Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hybrid organic additive technology) or equivalent. Engine oil use api certified sae 5w-20 engine oil, meeting the requirements of chrys...
Page 423
Chassis component fluid, lubricant, or genuine part automatic transaxle (cvt) – if equipped mopar 威 cvtf+4威 manual transaxle – if equipped mopar 威 atf+4威 automatic transmission fluid or equivalent licensed atf+4 威 product. Rear drive assembly (rda) mopar 威 gear & axle lubricant sae 80w-90 api gl 5 o...
Page 425: Maintenance Schedules
Maintenance schedules contents 䡵 emissions control system maintenance . . . . . . 426 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 426 ▫ required maintenance intervals . . . . . . . . . . 428 8 m a i n t e n a n c e s c h e d u l e s.
Page 426
Emissions control system maintenance the scheduled maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system. These and all other maintenance services in- cluded in this manual, should be done t...
Page 427
Note: • the oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change and even if the oil change indicator message is not illuminated. • change your engine oil more often if you drive your vehicle ...
Page 428
Once a month • check the tire pressure and look for unusual wear or damage. • inspect the battery and clean and tighten the terminals as required. • check the fluid levels of the coolant reservoir, brake master cylinder, and power steering — add as needed. • check all lights and other electrical ite...
Page 429
6,000 miles (10,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 12,000 miles (20,000 km) or 12 months maintenance service schedule ❏ change the engine...
Page 430
18,000 miles (30,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 24,000 miles (40,000 km) or 24 months maintenance service schedule ❏ change the engi...
Page 431
30,000 miles (50,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer reading date rep...
Page 432
42,000 miles (70,000 km) or 42 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 48,000 miles (80,000 km) or 48 months maintenance service schedule ❏ change the engi...
Page 433
54,000 miles (90,000 km) or 54 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 8 m a i n t e n a n c e s c h e d u l e s maintenance schedules 433.
Page 434
60,000 miles (100,000 km) or 60 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ inspect the brake linings; replace if necessary. ❏ adjust the parking brake on vehicles equipped wi...
Page 435
66,000 miles (110,000 km) or 66 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 72,000 miles (120,000 km) or 72 months maintenance service schedule ❏ change the en...
Page 436
78,000 miles (130,000 km) or 78 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 84,000 miles (140,000 km) or 84 months maintenance service schedule ❏ change the en...
Page 437
90,000 miles (150,000 km) or 90 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ inspect and replace pcv valve if necessary. † ❏ adjust the parking brake on vehicles equipped with ...
Page 438
102,000 miles (170,000 km) or 102 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ flush and replace the engine coolant if not done at 60 months. Odometer reading date repair order # dealer code signature authorized chrysler dealer 108,000 miles (1...
Page 439
114,000 miles (190,000 km) or 114 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 8 m a i n t e n a n c e s c h e d u l e s maintenance schedules 439.
Page 440
120,000 miles (200,000 km) or 120 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ inspect the brake linings; replace if necessary. ❏ adjust the parking brake on vehicles equipped ...
Page 441
126,000 miles (210,000 km) or 126 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 132,000 miles (220,000 km) or 132 months maintenance service schedule ❏ change th...
Page 442
138,000 miles (230,000 km) or 138 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 144,000 miles (240,000 km) or 144 months maintenance service schedule ❏ change th...
Page 443
150,000 miles (250,000 km) or 150 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏ adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer reading date ...
Page 444
† this maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about...
Page 445: Contents
If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447 ▫ prepare for the appointment . . . . . . . . . . . 447 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . 447 ▫ be reasonable with r...
Page 446
䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 453 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 453 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . 453 ▫ temperature grades . . . . . . . . . . . . . . . . . . 45...
Page 447
Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...
Page 448
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...
Page 449
Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...
Page 450
We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to reso...
Page 451
If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...
Page 452
• service manuals these comprehensive service manuals provide the information that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintaining, servicing, and repairing chrysler group llc vehicles. A complete working knowledge of the vehicle, system, and/or...
Page 453
Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....
Page 454
Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...
Page 455: Index
Index 10
Page 456
Abs (anti-lock brake system) . . . . . . . . . . . . . . 306 adding engine coolant (antifreeze) . . . . . . . . . . 398 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 348 adding washer fluid . . . . . . . . . . . . . . . . . . . . . 394 additives, fuel . . . . . . . . . . . . . . ...
Page 457
Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . 367 selection of lubricant . . . . . . . . . . . . . . . . . . . 404 shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 special additives . . . . . . . . . . . . . . . . . . . . . . 405 autostick . . . . . . . . . . ...
Page 458
Cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 cargo load floor . . . . . . . . . . . . . . . . . . . . . . . . 172 cargo tie-downs . . . . . . . . . . . . . . . . . . . . . . . . 172 cellular phone . . . . . . . . . . . . . . . . . . . . . . . . 92,260 center high mounted s...
Page 459
Disposal of used coolant . . . . . . . . . . . . . . . . 400 drain, flush, and refill . . . . . . . . . . . . . . . . . . 397 inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 points to remember . . . . . . . . . . . . . . . . . 399,401 pressure cap . . . . . . . . . . . . . . . ....
Page 460
Electric remote mirrors . . . . . . . . . . . . . . . . . . . . 89 electrical power outlets . . . . . . . . . . . . . . . . . . . 161 electronic brake control system . . . . . . . . . . . . . 308 anti-lock brake system . . . . . . . . . . . . . . . . . 308 brake assist system . . . . . . . . . . . ....
Page 461
Filters air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 390 air conditioning . . . . . . . . . . . . . . . . . . . . . . 271 engine oil . . . . . . . . . . . . . . . . . . . . . . . . 390,422 flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 hazard warning . . ...
Page 462
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412 garage door opener (homelink 威) . . . . . . . . . . . 151 gas cap (fuel filler cap) . . . . . . . . . . . . 348,350,383 gasoline, clean air . . . . . . . . . . . . . . . . . . . . . . 344 gasoline (fuel) . . . . . . . . . . . ...
Page 463
Hitches trailer towing . . . . . . . . . . . . . . . . . . . . . . . . 355 homelink 威 (garage door opener) transmitter . . . 151 hood release . . . . . . . . . . . . . . . . . . . . . . . . . . 137 ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 key . . . . . . . . . . . . ...
Page 464
Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 lead free gasoline . . . . . . . . . . . . . . . . . . . . . . 344 leaks, fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 life of tires . ....
Page 465
Turn signal . . . . . . . . . . . . . . . . . . . 82,139,141,419 voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 warning (instrument cluster description) . . . . . 185 loading vehicle . . . . . . . . . . . . . . . . . . . . . . 350,352 capacities . . . . . . . . . . . . . . . ....
Page 466
Multi-function control lever . . . . . . . . . . . . . . . 139 new vehicle break-in period . . . . . . . . . . . . . . . . 79 occupant restraints . . . . . . . . . . . . . . . . . . . 36,61,65 occupant restraints (sedan) . . . . . . . . . . . 57,58,61,64 octane rating, gasoline (fuel) . . . . . . . ...
Page 467
Power door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 outlet (auxiliary electrical outlet) . . . . . . . . . . 161 steering . . . . . . . . . . . . . . . . . . . . . . . . . . 301,302 sunroof . . . . . . . . ....
Page 468
Replacement tires . . . . . . . . . . . . . . . . . . . . . . . 332 reporting safety defects . . . . . . . . . . . . . . . . . . . 450 restraint, head . . . . . . . . . . . . . . . . . . . . . . . . . 132 restraints, child . . . . . . . . . . . . . . . . . . . . . . . 70,77 restraints, infant . . . ...
Page 469
Seatback release . . . . . . . . . . . . . . . . . . . . . . . 128 tilting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 security alarm (theft alarm) . . . . . . . . . . . . . . . . 18 selection of oil . . . . . . . . . . . . . . . . . . . . . . . . . 388 sentry key (immobilizer) ....
Page 470
Stuck, freeing . . . . . . . . . . . . . . . . . . . . . . . . . . 376 sun roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 sun visor extension . . . . . . . . . . . . . . . . . . . . . . . 92 supplemental restraint system - airbag . . . . . . . . 54 synthetic engine oil . . . . ...
Page 471
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334 safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 318,326 sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 snow tires . . . . . . . . . . . . . . . . . . . . . . . . . . . 334 spare tire . . . . . ...
Page 472
Turn signals . . . . . . . . . . . . . . . . . . . . . . 141,186,419 uci connector . . . . . . . . . . . . . . . . . . . . . . . . . 248 uconnect 威 (hands-free phone) . . . . . . . . . . . . . . . 92 understanding your instrument panel . . . . . . . . . 183 uniform tire quality grades . . . . . . . ...