1. DL manuals
  2. Jeep
  3. Automobile
  4. 2013 Grand Cherokee
  5. Owner's Manual

Jeep 2013 Grand Cherokee Owner's Manual

Other manuals for 2013 Grand Cherokee: Review, User Manual, Owner's Manual
Manual is about: 2013 Grand Cherokee

Summary of 2013 Grand Cherokee

  • Page 1

    Grand cherokee chrysler group llc o w n e r ’ s m a n u a l 2013 gr and cher ok ee 13wk741-126-ab second edition printed in u.S.A. 2 0 1 3.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3 understanding the featu...

  • Page 5: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 rollover warning . . . . . . . . . . . . . . . . . . .5 䡵 how to use this manual . . . . . . . . . . . . . .7 䡵 warnings and cautions . . . . . . . . . . . . . .9 䡵 vehicle identification number . . . . . . . .9 ...

  • Page 6

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle. It can go places and perform tasks t...

  • Page 7

    Read these publications carefully. Following the instruc- tions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle. Note: after reviewing the owner information, it should be stored in the vehicle for convenient referenc- ing and remain with the vehicle w...

  • Page 8

    Do not attempt sharp turns, abrupt maneuvers, or other unsafe driving actions that can cause loss of vehicle control. Failure to operate this vehicle safely may result in a collision, rollover of the vehicle, and severe or fatal injury. Drive carefully. Failure to use the driver and passenger seat b...

  • Page 9

    How to use this manual consult the table of contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment. The detailed index ...

  • Page 10

    8 introduction.

  • Page 11

    Warnings and cautions this owners manual contains warnings against oper- ating procedures that could result in a collision or bodily injury. It also contains cautions against procedures that could result in damage to your vehicle. If you do not read this entire owners manual, you may miss important ...

  • Page 12

    Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right front body vin location 10 introduc...

  • Page 13: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . .14 ▫ wireless ignition node (win) . . . . . . . . . . . . .14 ▫ key fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 ▫ removing key fob from ignition . . . . . . . . . .16 ▫ key-in-i...

  • Page 14

    ▫ using the panic alarm . . . . . . . . . . . . . . . . . .27 ▫ programming additional transmitters. . . . . . . .27 ▫ transmitter battery replacement . . . . . . . . . . .27 ▫ general information . . . . . . . . . . . . . . . . . . . .29 䡵 remote starting system — if equipped . . . . . . . . . . . ...

  • Page 15

    ▫ seat belt pretensioners . . . . . . . . . . . . . . . . . .64 ▫ supplemental active head restraints (ahr) . . .65 ▫ enhanced seat belt use reminder system (beltalert 威) . . . . . . . . . . . . . . . . . . . . . . . . . .69 ▫ seat belt lock out. . . . . . . . . . . . . . . . . . . . . .70 ▫ seat be...

  • Page 16

    A word about your keys your vehicle uses a keyless ignition system. This system consists of a key fob with remote keyless entry (rke) transmitter and a wireless ignition node (win) with integral ignition switch. You can insert the key fob into the ignition switch with either side up. Keyless enter-n...

  • Page 17

    Key fob the key fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion. It also contains the remote keyless entry (rke) transmitter and an emergency key, which stores in the rear of the key ...

  • Page 18

    To remove the emergency key, slide the mechanical latch at the top of the key fob sideways with your thumb and then pull the key out with your other hand. Note: you can insert the double-sided emergency key into the lock cylinders with either side up. Removing key fob from ignition place the shift l...

  • Page 19

    • the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the off position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “electronic vehi...

  • Page 20

    Warning! (continued) • do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave keyless enter-n-go™ in the acc or on/ run mode. A child could operate power windows, other controls, or move the vehicle. • do not leave children or animals inside parked...

  • Page 21

    Sentry key 姞 the sentry key 威 immobilizer system prevents unauthor- ized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses the factory-mated key fob with remot...

  • Page 22

    Replacement keys note: only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle. Caution! • always remove the key fobs from the vehicle and lock all doors when le...

  • Page 23

    • this device must accept any interference that may be received, including interference that may cause unde- sired operation. Vehicle security alarm — if equipped this vehicle security alarm monitors the vehicle doors, liftgate, liftgate flipper glass, and ignition for unauthorized operation. When t...

  • Page 24

    • for vehicles not equipped with keyless enter-n-go™, make sure the vehicle ignition system is ⬙off⬙ and the key is physically removed from the ignition. 2. Perform one of the following methods to lock the vehicle: • press lock on the interior power door lock switch with the driver and/or passenger ...

  • Page 25

    Note: • the driver’s door key cylinder and the liftgate button on the rke transmitter cannot arm or disarm the vehicle security alarm. • the vehicle security alarm remains armed during power liftgate entry. Pressing the liftgate button will not disarm the vehicle security alarm. If someone enters th...

  • Page 26

    This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “mirrors” in “understanding the features of your vehicle” for fur- ther information. The lights will fade to off after approximately 30 seconds or they will immediately fade to off once the ignition switc...

  • Page 27

    To unlock the doors press and release the unlock button on the rke transmitter once to unlock the driver’s door or twice to unlock all doors. The turn signal lamps will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Refer to “keyless enter-n-go™” under “thing...

  • Page 28

    Flash lamps with lock this feature will cause the turn signal lamps to flash when the doors are locked or unlocked with the rke transmitter. This feature can be turned on or off. To change the current setting, refer to “electronic vehicle information center (evic)/personal settings (customer- progra...

  • Page 29

    Using the panic alarm to turn the panic alarm feature on or off, press and hold the panic button on the rke transmitter for at least one second and release. When the panic alarm is on, the headlights turn on, the park lamps will flash, the horn will pulse on and off, and the interior lights will tur...

  • Page 30

    1. Remove the emergency key by sliding the mechanical latch at the top of the rke transmitter sideways with your thumb and then pull the key out with your other hand. 2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the rke transmit...

  • Page 31

    3. Remove and replace the battery. When replacing the battery, match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it wit...

  • Page 32

    If your rke transmitter fails to operate from a normal distance, check for these two conditions: 1. A weak battery in the rke transmitter. The expected life of the battery is a minimum of three years. 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, and some mo...

  • Page 33

    • system not disabled from previous remote start event • vehicle theft alarm not active • ignition in off position for keyless enter-n-go™ vehicle • fuel level meets minimum requirement warning! • do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon mon- oxi...

  • Page 34

    To enter remote start mode press and release the remote start button on the rke transmitter twice within five sec- onds. The vehicle doors will lock, the parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the remote sta...

  • Page 35

    Doors and disarm the vehicle security alarm (if equipped). Then, prior to the end of the 15 minute cycle, press and release the start/stop button. If the start/stop button is not present, insert the key fob into the ignition switch and turn the switch to the on/run position. Note: • for vehicles not...

  • Page 36

    The remote start comfort system can be activated and deactivated through the electronic vehicle information center (evic). For more information on remote start comfort system operation refer to “electronic vehicle information center (evic)/customer-programmable features (setup)” in “understanding yo...

  • Page 37

    Warning! (continued) • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or with access to an unlocked vehicle. • allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or oth...

  • Page 38

    If a rear door is locked, it cannot be opened from inside the vehicle without first unlocking the door. The door may be unlocked manually by raising the lock knob. Automatic door locks — if equipped when enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h...

  • Page 39

    Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child-protection locks are engaged (locked). Child-protection door lock location child-protection door lock function 2 things to know before starting your vehicle 37.

  • Page 40

    Note: for emergency exit from the rear seats when the child-protection door lock system is engaged, manually raise the door lock knob to the unlocked position, roll down the window, and open the door using the outside door handle. Keyless enter-n-go™ the passive entry system is an enhancement to the...

  • Page 41

    Note: if “unlock all doors 1st press” is programmed all doors will unlock when you grab hold of the driver’s front door handle. To select between “unlock driver door 1st press” and “unlock all doors 1st press”, refer to “electronic vehicle information center (evic)/personal settings (customer-progra...

  • Page 42

    Preventing inadvertent locking of passive entry rke transmitter in vehicle to minimize the possibility of unintentionally locking a passive entry rke transmitter inside your vehicle, the passive entry system is equipped with an automatic door unlock feature which will function if there is no key fob...

  • Page 43

    Note: if “unlock all doors 1st press” is programmed in evic, all doors will unlock when you push the button on the liftgate. If ⬙unlock driver door 1st press⬙ is programmed in evic, the liftgate and flipper glass will unlock when you press the button on the liftgate for further information, refer to...

  • Page 44

    With one of the vehicle’s passive entry rke transmitters within 5 ft (1.5 m) of the driver or passenger front door handle, press the door handle lock button to lock all four doors and liftgate. Note: • after pressing the door handle lock button, you must wait two seconds before you can lock or unloc...

  • Page 45

    Windows power windows the power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door and rear doors which operate the front passenger and rear passenger door windows. The win- dow controls will operate only when the ignition switch is in t...

  • Page 46

    Warning! Never leave children in a vehicle with the key in the ignition switch or leave a vehicle with keyless enter- n-go™ in the acc or on/run position. Occupants, particularly unattended children, can become en- trapped by the windows while operating the power window switches. Such entrapment may...

  • Page 47

    Note: if the window runs into any obstacle during auto up it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window. Any impact due to rough road condi- tions may trigger the auto reverse function unexpectedly during auto up. If this hap...

  • Page 48

    Window lockout button the window lockout button on the driver’s door allows you to disable the window controls on the rear doors. To disable the window controls on the rear doors, press the window lockout button. To enable the window controls, press the window lockout button again. Wind buffeting wi...

  • Page 49

    Liftgate to open the liftgate, pull up on the handle and lift. Manually unlocking the vehicle doors with the plunger or a key in the lock cylinder will not unlock the liftgate. Warning! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your pas- sengers coul...

  • Page 50

    Liftgate flipper glass the liftgate flipper glass is also unlocked when the liftgate is unlocked. To open the flipper glass, push up on the window switch located on the liftgate. Note: the liftgate flipper glass will not open if the liftgate is ajar. Once the liftgate flipper glass has been opened, ...

  • Page 51

    Note: if a malfunction to the liftgate latch should occur, an emergency liftgate latch release can be used to open the liftgate. The emergency liftgate latch release can be accessed through a snap-in cover located on the liftgate trim panel. Warning! Driving with the flipper glass open can allow poi...

  • Page 52

    When the liftgate button on the rke transmitter is pressed two times, the turn signals will flash twice to signal that the liftgate is opening or closing (if flash lamps with lock is enabled in the evic) and the liftgate chime will be audible. For further information, refer to ⬙customer-programmable...

  • Page 53

    • if anything obstructs the power liftgate while it is closing or opening, the liftgate will automatically reverse to the closed or open position, provided it meets sufficient resistance. • there are also pinch sensors attached to the side of the liftgate. Light pressure anywhere along these strips ...

  • Page 54

    Warning! • driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • if you are required to drive with the liftgate open, make sure that all windows are c...

  • Page 55

    • knee bolsters for front seat occupants • front seat belts incorporate pretensioners that may enhance occupant protection by managing occupant energy during an impact event • all seat belt systems (except the driver’s) include automatic locking retractors (alrs), which lock the seat belt webbing in...

  • Page 56

    Children that are not big enough to wear the vehicle seat belt properly (see section on child restraints) should be secured in the rear seat in child restraints or belt- positioning booster seats. Older children who do not use child restraints or belt-positioning booster seats should ride properly b...

  • Page 57

    Warning! • relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags won’t deploy at all. Always wear your seat belts even though you have air bags. • being too close to the steeri...

  • Page 58

    Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle....

  • Page 59

    Warning! (continued) • it is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • ...

  • Page 60

    3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your bel...

  • Page 61

    Warning! (continued) • a belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your s...

  • Page 62

    5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retrac- tor will withdraw any slack in the belt. 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed posi- tion. If necessary, slide the la...

  • Page 63

    Lap/shoulder belt untwisting procedure use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold ...

  • Page 64

    Button, verify the shoulder belt anchorage is latched by pulling downward on the shoulder belt anchorage until it is locked into position. Note: the adjustable upper shoulder belt anchorage is equipped with an easy up feature. This feature allows the shoulder belt anchorage to be adjusted in the upw...

  • Page 65

    Automatic locking retractor mode (alr) — if equipped in this mode, the shoulder belt is automatically pre- locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is avail- able on all passenger-seating positions with a combina- tion lap/shoulder belt...

  • Page 66

    Warning! • the belt and retractor assembly must be replaced if the seat belt assembly automatic locking retractor (alr) feature or any other seat belt function is not working properly when checked according to the procedures in the service manual. • failure to replace the belt and retractor assembly...

  • Page 67

    Supplemental active head restraints (ahr) these head restraints are passive, deployable compo- nents, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspec- tion of the head restraint. The head restraint will be split in two halves, with the front ...

  • Page 68

    However if during a front impact, a secondary rear impact occurs, the ahr may deploy based on the severity and type of the impact. Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in...

  • Page 69

    Resetting active head restraints (ahr) if the active head restraints are triggered in a collision, you must reset the head restraint on the driver’s and front passenger seat. You can recognize when the active head restraint has been triggered by the fact that they have moved forward (as shown in ste...

  • Page 70

    3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 1 — downward movement 2 — rearward movement 3 — final downward movement to engage locking mechanism 68 things to know before starting your vehicle.

  • Page 71

    4. The ahr front soft foam and trim half should lock into the back decorative plastic half. Note: • if you have difficulties or problems resetting the active head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an autho...

  • Page 72

    Light remains illuminated until the respective seat belts are fastened. The driver should instruct all other occu- pants to fasten their seat belts. If a front seat belt is unbuckled while traveling at speeds greater than 5 mph (8 km/h), beltalert 威 will provide both audio and visual notification. T...

  • Page 73

    Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible. Keep the belt low so that it does not come across the abdomen. That way the strong bones of the hips will take the force if there is a collision. Seat belt extender if a seat belt is too sh...

  • Page 74

    Supplemental restraint system (srs) — air bags this vehicle has advanced front air bags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s advanced front air bag is mounted in the center of the steering wheel. The passenger’s advanced front air b...

  • Page 75

    The advanced front air bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on several factors, including the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adj...

  • Page 76

    • instrument panel • knee impact bolster • driver advanced front air bag • passenger advanced front air bag • supplemental seat-mounted side air bags (sab) • supplemental side air bag inflatable curtains (sabic) • front and side impact sensors • front seat belt pretensioners, seat belt buckle switch...

  • Page 77

    Warning! (continued) • do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional. The protective covers for the air bag cushions are designed to open only when the air ba...

  • Page 78

    Supplemental side air bag inflatable curtain (sabic) sabic air bags may offer side-impact and vehicle roll- over protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboa...

  • Page 79

    • being too close to the sab and sabic air bags during deployment could cause you to be severely injured or killed. • should a vehicle rollover occur, the pretensioners and/or sab and sabic air bags on both sides of the vehicle may deploy. The system includes side impact sensors that are cali- brate...

  • Page 80

    Warning! (continued) • sab and sabic air bags are a supplement to the seat belt restraint system. Occupants, including children who are up against or very close to sab or sabic air bags can be seriously injured or killed. Occupants, especially children, should not lean on or sleep against the door, ...

  • Page 81

    Appropriate sized child restraint, infant restraint or booster seat recommended for the size and weight of the child. Knee impact bolsters the knee impact bolsters help protect the knees of the driver and the front passenger, and position front occu- pants for the best interaction with the advanced ...

  • Page 82

    Impact, advanced front air bags may deploy in crashes with little vehicle front-end damage but that produce a severe initial deceleration. The side air bags will not deploy in all side collisions. Side air bag deployment will depend on the severity and type of collision. Because air bag sensors meas...

  • Page 83

    Noted that could affect the air bag system. The diagnos- tics also record the nature of the malfunction. Warning! Ignoring the air bag warning light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the...

  • Page 84

    The orc determines if a side collision requires the side air bags to inflate, based on the severity and type of collision. Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating sa...

  • Page 85

    Note: in a rollover the pretensioners and/or sab and sabic air bags may deploy on both sides of the vehicle. Front and side impact sensors in front and side impacts, impact sensors can aid the orc in determining appropriate response to impact events. Enhanced accident response system in the event of...

  • Page 86

    If you do have a collision which deploys the air bags, any or all of the following may occur: • the nylon air bag material may sometimes cause abrasions and/or skin reddening to the driver and front passenger as the air bags deploy and unfold. The abrasions are similar to friction rope burns or thos...

  • Page 87

    Maintaining your air bag system warning! • modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the s...

  • Page 88

    Air bag warning light you will want to have the air bags ready to inflate for your protection in a collision. The air bag warning light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenan...

  • Page 89

    Time, typically 30 seconds or less. The edr in this vehicle is designed to record such data as: • how various systems in your vehicle were operating; • whether or not the driver and passenger safety belts were buckled/fastened; • how far (if at all) the driver was depressing the accelerator and/or b...

  • Page 90

    There are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to make sure you have the correct seat for your child. Before buying any restraint system, make sure that it has a la...

  • Page 91

    Summary of recommendations for restraining children in vehicles child size, height, weight or age recommended type of child restraint infants and toddlers children who are two years old or younger and who have not reached the height or weight limits of their child restraint either an infant carrier ...

  • Page 92

    Infants and child restraints safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. Two types of child restraints can be used rearward-facing: infant carrie...

  • Page 93

    Remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat bel...

  • Page 94

    Children too large for booster seats children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether ...

  • Page 95

    Recommendations for attaching child restraints restraint type combined weight of the child + child restraint use any attachment method shown with an “x” below latch – lower anchors only seat belt only latch – lower anchors + top tether anchor seat belt + top tether anchor rear-facing child restraint...

  • Page 96

    Lower anchors and tethers for children (latch) restraint system your vehicle is equipped with the child restraint anchor- age system called latch, which stands for lower anchors and tethers for children. The latch system has three vehicle anchor points for installing latch- equipped child seats. The...

  • Page 97

    Latch positions for installing child restraints in this vehicle lower anchorage symbol 2 anchorages per seating position top tether anchorage symbol 2 things to know before starting your vehicle 95.

  • Page 98

    What is the weight limit (child’s weight + weight of the child restraint) for using the latch anchorage system to attach the child restraint? 65 lbs (29.5 kg) use the latch anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg). Use the seat belt and teth...

  • Page 99

    Can two child restraints be attached using a common lower latch anchorage? No never “share” a latch anchorage with two or more child restraints. If the center position does not have dedicated latch lower anchorages, use the seat belt to in- stall a child seat in the center position next to a child s...

  • Page 100

    Locating the latch anchorages the lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between ...

  • Page 101

    You lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along gap between the seatback and seat cushion. Locating the latch anchorages in addition, there are tether strap anchorages behind each rear seating position located on the back of the seat...

  • Page 102

    Latch-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage. Forward-facing child restraints and some rear-facing infant restraint...

  • Page 103

    Always follow the directions of the child restraint manu- facturer when installing your child restraint. Not all child restraint systems will be installed as described here. Vehicles with a center arm rest tether for rearward facing infant seats secured in the center seat position with the vehicle s...

  • Page 104

    3. Raise the armrest and attach the tether hook to the strap located on the front of the arm rest. To install a latch-compatible child restraint 1. If the selected seating position has a switchable auto- matic locking retractor (alr) seat belt, stow the seat belt, following the instructions below. S...

  • Page 105

    4. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seat- ing position. 5. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section “installing child restraints using the top tether anchorage” for direc- tio...

  • Page 106

    Warning! Improper installation of a child restraint to the latch anchorages can lead to failure of the re- straint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. Installing child restraints using...

  • Page 107

    Lap/shoulder belt systems for installing child restraints in this vehicle 2 things to know before starting your vehicle 105.

  • Page 108

    What is the weight limit (child’s weight + weight of the child re- straint) for using the tether anchor with the seat belt to attach a forward facing child restraint? Weight limit of the child restraint always use the tether anchor when using the seat belt to install a for- ward facing child restrai...

  • Page 109

    Installing a child restraint with a switchable automatic locking retractor (alr) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. 2. Pull enough of the seat belt webbing fro...

  • Page 110

    8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “lower anchors and tethers for chil- dren (latch) restraint system” for directions to attach a tether anchor. 9. Test...

  • Page 111

    5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “lower anchors and tethers for chil- dren (latch) restraint system” for directions to attach a tether anchor. 6. Test...

  • Page 112

    Installing child restraints using the top tether anchorage 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for t...

  • Page 113

    3. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts. If...

  • Page 114

    5. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram. 6. Remove slack in the tether strap according to the child restraint manufacturer’s instructions. Warning! The top tether anchorages are not visible until the gap panel is folded down. Do not ...

  • Page 115

    Transporting pets air bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by sea...

  • Page 116

    Note: a new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty. Safety tips transporting passengers never transport passengers in the cargo area. Warning...

  • Page 117

    Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (co), follow these safety tips: • do not run the engine in a closed garage or in confined...

  • Page 118

    Safety checks you should make inside the vehicle seat belts inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat b...

  • Page 119

    Warning! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury. • always make sure that floor mats are properly attached to the floor mat fasteners. • never place or install floor mats or other floor coverings in the vehicle that cannot b...

  • Page 120

    Periodic safety checks you should make outside the vehicle tires examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Ch...

  • Page 121: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 ▫ inside day/night mirror . . . . . . . . . . . . . . . .126 ▫ automatic dimming mirror — if equipped . . . . . . . . . . . . . . . . . . . . . . . . .127 ▫ outside mirrors . . . ...

  • Page 122

    ▫ phone call features . . . . . . . . . . . . . . . . . . . .150 ▫ uconnect威 phone features . . . . . . . . . . . . . . .153 ▫ advanced phone connectivity . . . . . . . . . . . .158 ▫ things you should know about your uconnect 威 phone. . . . . . . . . . . . . . . . . . . . . .160 ▫ general informati...

  • Page 123

    ▫ linking and unlinking the remote keyless entry transmitter to memory . . . . . . . . . . . . .198 ▫ memory position recall . . . . . . . . . . . . . . . . .199 ▫ easy entry/exit seat . . . . . . . . . . . . . . . . . . .200 䡵 to open and close the hood . . . . . . . . .201 䡵 lights . . . . . . . ....

  • Page 124

    䡵 windshield wipers and washers . . . . . .214 ▫ windshield wiper operation . . . . . . . . . . . . .215 ▫ intermittent wiper system . . . . . . . . . . . . . . .216 ▫ windshield washer operation. . . . . . . . . . . . .216 ▫ mist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 ▫ ra...

  • Page 125

    ▫ to vary the speed setting . . . . . . . . . . . . . . .235 ▫ setting the following distance in acc . . . . . .236 ▫ adaptive cruise control (acc) menu . . . . . . .240 ▫ display warnings and maintenance . . . . . . . .241 ▫ precautions while driving with acc . . . . . . .245 ▫ general information ...

  • Page 126

    ▫ sunglasses bin door . . . . . . . . . . . . . . . . . . .270 䡵 garage door opener — if equipped . . .270 ▫ before you begin programming homelink威. . .272 ▫ programming a rolling code . . . . . . . . . . . . .272 ▫ programming a non-rolling code . . . . . . . . .274 ▫ canadian/gate operator program...

  • Page 127

    ▫ closing sunroof — manual mode . . . . . . . . . .285 ▫ opening power shade — express . . . . . . . . . .285 ▫ opening power shade — manual mode . . . . .285 ▫ closing power shade — express . . . . . . . . . . .285 ▫ closing power shade — manual mode . . . . . .285 ▫ pinch protect feature . . . . ....

  • Page 128

    Mirrors inside day/night mirror a single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting. The mirror head can be adjus...

  • Page 129

    Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light in the button will illuminate to indicate when the dim- ming feature is activated. The m...

  • Page 130

    Outside mirrors to receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they ...

  • Page 131

    Power mirrors the power mirror switch is located on the driver’s side door trim panel. The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. To adjust a mirror, press the mirror select button for the mirror that you want to adjust. Using the mirror contro...

  • Page 132

    Power mirror preselected positions can be controlled by the optional memory seat feature. Refer to “driver memory seat” in “understanding the features of your vehicle” for further information. Heated mirrors — if equipped these mirrors are heated to melt frost or ice. This feature is activated whene...

  • Page 133

    Sun visor extension — if equipped this feature has a pull out extension on the sun visor for increased coverage. Blind spot monitoring — if equipped the blind spot monitoring (bsm) system uses two radar- based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (aut...

  • Page 134

    When the vehicle is started, the bsm warning light will momentarily illuminate in both outside rear view mirrors to let the driver know that the system is operational. The bsm system sensors operate when the vehicle is in any forward gear or reverse and enters stand-by mode when the vehicle is in pa...

  • Page 135

    The bsm system notifies the driver of objects in the detection zones by illuminating the bsm warning light located in the outside mirrors in addition to sounding an audible (chime) alert and reducing the radio volume. Refer to “modes of operation” for further information. The bsm system monitors the...

  • Page 136

    Entering from the side vehicles that move into your adjacent lanes from either side of the vehicle. Entering from the rear vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h). Side monitoring rear monitor...

  • Page 137

    Overtaking traffic if you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 10 mph (16 km/h)...

  • Page 138

    The bsm system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service. Overtaking/passing stationary objects 136 unde...

  • Page 139

    The bsm system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Warning! The blind spot monitoring system is only an aid to help detect objects in the blind spot zones. The bsm system is not designed to detect pedestrians, bicy- clists, or ...

  • Page 140

    Rear cross path the rear cross path (rcp) feature is intended to aid the driver when backing out of parking spaces where their vision of oncoming vehicles may be blocked. Proceed slowly and cautiously out of the parking space until the rear end of the vehicle is exposed. The rcp system will then hav...

  • Page 141

    Note: in a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When rcp is on and the vehicle is in reverse, the driver is alerted using both the visua...

  • Page 142

    Blind spot alert lights/chime when operating in blind spot alert lights/chime mode, the bsm system will provide a visual alert in the appro- priate side view mirror based on a detected object. If the turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, a...

  • Page 143

    Display the message “ blind spot system unavailable- astronomy zone”. The side mirrors led’s will be lit up and stay lit until the vehicle exits the zone. Uconnect 姞 phone — if equipped uconnect 威 phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect 威 phone al- lows yo...

  • Page 144

    Warning! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. All atten- tion should be focused on safely operating the ve- hicle. Failure to do so may result in a collision causing serious injury or death. Uconn...

  • Page 145

    The radio display will be used for visual prompts from the uconnect 威 phone such as “cell” or caller id on certain radios. Operation voice commands can be used to operate the uconnect 威 phone and to navigate through the uconnect 威 phone menu structure. Voice commands are required after most uconnect...

  • Page 146

    To activate the uconnect 威 phone, simply press the button and follow the audible prompts for directions. Uconnect 威 phone sessions begin with a press of the button on the radio control head. Cancel command at any prompt, after the beep, you can say “cancel” and you will be returned to the main menu....

  • Page 147

    • you will then be asked to give your mobile phone a priority level between one and seven, with one being the highest priority. You can pair up to seven mobile phones to your uconnect 威 phone. However, at any given time, only one mobile phone can be in use, connected to your uconnect 威 system. The p...

  • Page 148

    Or downloaded phonebook. To learn how to store a name in the phonebook, refer to “add names to your uconnect 威 phonebook”, in the phonebook. • the uconnect威 system will confirm the name and then dial the corresponding phone number, which may appear in the display of certain radios. Phonebook downloa...

  • Page 149

    • this downloaded phonebook cannot be edited or deleted on the uconnect 威 phone. These can only be edited on the mobile phone. The changes are trans- ferred and updated to uconnect 威 phone on the next phone connection. Add names to your uconnect 威 phonebook note: adding names to the uconnect 威 phone...

  • Page 150

    Edit uconnect 威 phonebook entries note: • editing names in the phonebook is recommended when the vehicle is not in motion. • automatic downloaded phonebook entries cannot be deleted or edited. • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook edit entry”....

  • Page 151

    • after you enter the phonebook delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say “list names” to hear a list of the entries in the phonebook from which you choose. To select ...

  • Page 152

    • after the “ready” prompt and the following beep, say “phonebook list names”. • the uconnect威 phone will play the names of all the phonebook entries, including the downloaded phone- book entries, if available. • to call one of the names in the list, press the but- ton during the playing of the desi...

  • Page 153

    Mobile phone. Press the button to place the current call on hold and answer the incoming call. Note: the uconnect 威 phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore i...

  • Page 154

    Three-way calling to initiate three-way calling, press the button while a call is in progress, and make a second phone call, as described under “making a second call while current call is in progress”. After the second call has established, press and hold the button until you hear a double beep, ind...

  • Page 155

    Ends, or until the vehicle battery condition dictates cessation of the call on the uconnect 威 phone and transfer of the call to the mobile phone. • after the ignition key is cycled to off, a call can continue on the uconnect 威 phone for a certain dura- tion, after which the call is automatically tra...

  • Page 156

    If the phone is not reachable and the uconnect 威 phone is operational, you may reach the emergency number as follows: • press the button to begin. • after the “ready” prompt and the following beep, say “emergency” and the uconnect 威 phone will instruct the paired mobile phone to call the emergency n...

  • Page 157

    Note: • the roadside assistance number dialed is based on the country where the vehicle is purchased (1-800-528-2069 for the u.S., 1-877-213-4525 for canada, 55-14-3454 for mexico city and 1-800-712-3040 for outside mexico city in mexico). Please refer to the “roadside assistance” coverage details o...

  • Page 158

    Button and say the sequence you wish to enter, followed by the word “send”. For example, if required to enter your pin followed with a pound, (3 7 4 6 #), you can press the button and say, “3 7 4 6 # send”. Saying a number, or sequence of numbers, followed by “send”, is also to be used for navigatin...

  • Page 159

    Turning confirmation prompts on/off turning confirmation prompts off will stop the system from confirming your choices (e.G., the uconnect 威 phone will not repeat a phone number before you dial it). • press the button to begin. • after the “ready” prompt and the following beep, say one of the follow...

  • Page 160

    Mute/un-mute (mute on/off) when you mute the uconnect 威 phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the uconnect 威 phone: • press the button. • following the beep, say “mute”. In order to un-mu...

  • Page 161

    • when prompted, say “list phones”. • the uconnect威 phone will play the phone names of all paired mobile phones in order from the highest to the lowest priority. To “select” or “delete” a paired phone being announced, press the button and say “se- lect” or “delete”. Also, see the next two sections f...

  • Page 162

    Things you should know about your uconnect 姞 phone uconnect 威 phone tutorial to hear a brief tutorial of the system features, press the button and say “uconnect 威 tutorial.” voice training for users experiencing difficulty with the system recogniz- ing their voice commands or numbers, the uconnect 威...

  • Page 163

    This will delete all phone pairing, phone book entries, and other settings in all language modes. The system will prompt you before resetting to factory settings. Voice command • for best performance, adjust the rearview mirror to provide at least ½ in (1 cm) gap between the overhead console (if equ...

  • Page 164

    • phonebook (downloaded and uconnect威 phone lo- cal) name recognition rate is optimized when the entries are not similar. • numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • you can say “o” (letter “o”) for “0” (zero). • even though international ...

  • Page 165

    Sms uconnect 威 phone can read or send new messages on your phone. Read messages: if you receive a new text message while your phone is connected to uconnect 威 phone, an announcement will be made to notify you that you have a new text message. If you wish to hear the new message: • press the button. ...

  • Page 166

    3. Where are you? 4. I need more direction. 5. L o l 6. Why 7. I love you 8. Call me 9. Call me later 10. Thanks 11. See you in 15 minutes 12. I am on my way 13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18. When can we meet? 19. Send number to ...

  • Page 167

    Turn sms incoming announcement on/off turning the sms incoming announcement off will stop the system from announcing the new incoming mes- sages. • press the button. • after the “ready” prompt and the following beep, say “setup, sms incoming message announcement,” you will then be given a choice to ...

  • Page 168

    166 understanding the features of your vehicle.

  • Page 169

    3 understanding the features of your vehicle 167.

  • Page 170

    168 understanding the features of your vehicle.

  • Page 171

    Voice commands primary alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location voice commands primary alternate (s) all call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais 3 understanding th...

  • Page 172

    Voice commands primary alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book voice commands primary alternate (s) previous record again redial return to main menu return or main menu select phone select...

  • Page 173

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 174

    Warning! Any voice commanded system should be used only in safe driving conditions following all applicable laws. All attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. When you press the voice command button, you ...

  • Page 175

    To hear the first available menu, press the voice com- mand button and say “help” or “main menu”. Commands the voice command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the volum...

  • Page 176

    Radio am (or radio long wave or radio medium wave — if equipped) to switch to the am band, say “am” or “radio am”. In this mode, you may say the following commands: • “frequency #” (to change the frequency) • “next station” (to select the next station) • “previous station” (to select the previous st...

  • Page 177

    • “previous track” (to play the previous track) • “play” (to play a artist name, playlist name, album name, track name, etc.) bluetooth 威 streaming (bt) mode to switch to bluetooth 威 streaming (bt) mode, say “bluetooth streaming”. In this mode, you may say the following commands: • “next track” (to ...

  • Page 178

    System setup to switch to system setup, you may say on of the following: • “change to system setup” • “main menu system setup” • “switch to system setup” • “change to setup” • “main menu setup” or • “switch to setup” in this mode, you may say the following commands: • “language english” • “language ...

  • Page 179

    2. Repeat the words and phrases when prompted by uconnect 威 voice. For best results, the voice training session should be completed when the vehicle is parked, engine running, all windows closed, and the blower fan switched off. This procedure may be re- peated with a new user. The system will adapt...

  • Page 180

    Power seats — if equipped some models may be equipped with eight-way power driver and front passenger seats. The power seat switches are located on the outboard side of the seat. There are two switches that control the movement of the seat cushion and the seatback. Power seat switches 1 — seatback s...

  • Page 181

    Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting the seat up or down the height of the seats...

  • Page 182

    Warning! (continued) • do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Caution! Do not place any article under a power seat or impede its abili...

  • Page 183

    Power lumbar — if equipped vehicles equipped with power driver or passenger seats are also equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lumbar su...

  • Page 184

    Manual front seats forward/rearward adjustment some models may be equipped with manual front driver or passenger seats. The seats can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under t...

  • Page 185

    Manual front passenger seatback adjustment — recline to adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired position and release the lever. To return the seatback, lift the lever, lean forward and release the lever. Warning! Do not ride with the sea...

  • Page 186

    Front passenger seat fold-flat feature — if equipped to fold the seatback to the flat load-floor position, lift the recline lever and push the seatback forward. To return to the seating position, raise the seatback and lock it into place. Heated seats — if equipped on some models, the front and rear...

  • Page 187

    Warning! (continued) • do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface tempera- ture of the seat. Veh...

  • Page 188

    60 minutes of continuous operation. At that time, the num- ber of illuminated leds changes from two to one, indicating the change. The low-level setting will turn off automati- cally after approximately 45 minutes. Rear heated seats on some models, the two outboard seats are equipped with heated sea...

  • Page 189

    You can choose from high, low or off heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for high, one for low and none for off. Press the switch once to select high-level heating. Press the switch a second time to select low-l...

  • Page 190

    The ventilated seat switches are located on the switch bank in the center stack of the instrument panel, just below the climate controls. The ventilated seat switches are used to control the speed of the fans located in the seat. Press the switch once to choose high, press it a second time to choose...

  • Page 191

    Active head restraints — front seats active head restraints are passive, deployable compo- nents, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspec- tion of the head restraint. The head restraint will be split in two halves, with the front half...

  • Page 192

    For comfort the active head restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. Note: • the head ...

  • Page 193

    • in the event of deployment of an active head re- straint, refer to “occupant restraints/resetting active head restraints (ahr)” in “things to know before starting your vehicle” for further information. Warning! • do not place items over the top of the active head restraint, such as coats, seat cov...

  • Page 194

    Head restraints — rear seats the head restraints on the outboard seats are not adjust- able. They automatically fold forward when the rear seat is folded to a load floor position but do not return to their normal position when the rear seat is raised. After returning either seat to its upright posit...

  • Page 195

    Warning! (continued) collision. Always make sure the outboard head re- straints are in their upright positions when the seat is to be occupied. Note: for proper routing of a child seat tether refer to “occupant restraints” in “things to know before start- ing your vehicle” for further information. 6...

  • Page 196

    • do not fold the 40% rear seat down with the right outboard seat belt buckled. 2. Fold the rear seat completely forward. To raise rear seat raise the rear seatback and lock it into place. If interfer- ence from the cargo area prevents the seatback from fully locking, you will have difficulty return...

  • Page 197

    Reclining rear seat to recline the seatback, lift the lever located on the outboard side of the seat, lean back and release the lever at the desired position. To return the seatback, lift the lever, lean forward and release the lever. Warning! Do not ride with the seatback reclined so that the shoul...

  • Page 198

    Note: your vehicle is equipped with two rke trans- mitters. One or both rke transmitters can be linked to either memory position. The memory system can accom- modate up to four rke transmitters, each one linked to either of the two memory positions. The memory seat switch is located on the driver’s ...

  • Page 199

    Programming the memory feature note: to create a new memory profile, perform the following: vehicles equipped with keyless enter-n-go 1. Without pressing the brake pedal, push the engine start/stop button and cycle the ignition to the on/run position (do not start the engine). 2. Adjust all memory p...

  • Page 200

    Note: • memory profiles can be set without the vehicle in park, but the vehicle must be in park to recall a memory profile. • the recall memory with remote linked to memory feature can be enabled through the electronic vehicle information center (evic), refer to “electronic vehicle information cente...

  • Page 201

    4. Press and release the lock button on the rke transmitter within 10 seconds. Note: your rke transmitters can be unlinked to your memory settings by pressing the set (s) button followed by the unlock button on the rke transmitter in step 4 above. Memory position recall note: the vehicle must be in ...

  • Page 202

    Note: when recall is requested with the rke transmit- ter and the easy entry/exit seat is turned on, the seat will go to the easy entry position. When the ignition is placed in the on/run position, the seat will then automatically return to the set memory position. A recall can be cancelled by press...

  • Page 203

    • the easy entry/easy exit feature is disabled when the driver seat position is less than 0.9 in (22.7 mm) forward of the rear stop. At this position, there is no benefit to the driver by moving the seat for easy exit or easy entry. Each stored memory setting will have an associated easy entry and e...

  • Page 204

    2. Reach under the hood, move safety latch to the left and lift the hood. Caution! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. Warning! Be sure the hood is fully latched before driving your vehic...

  • Page 205

    Lights headlight switch the headlight switch is located on the left side of the instrument panel, next to the steering wheel. The head- light switch controls the operation of the headlights, parking lights, instrument panel lights, cargo lights and fog lights (if equipped). To turn on the headlights...

  • Page 206

    Note: • your vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less susceptible to stone breakage than glass lights. Plastic is not as scratch resistant as glass and therefore differ- ent lens cleaning procedures must be followed. • to minimize the po...

  • Page 207

    Information center (evic)/customer-programmable features” in “understanding your instrument panel” for further information. If your vehicle is equipped with a “rain sensitive wiper system” and it is activated, the headlights will automati- cally turn on after the wipers complete five wipe cycles wit...

  • Page 208

    To activate 1. Enable the automatic high beams. Refer to “elec- tronic vehicle information center (evic)/customer- programmable features” in “understanding your in- strument panel” for further information. 2. Turn the headlight switch to the auto headlight position. 3. Push the multifunction lever a...

  • Page 209

    Automatic headlight leveling — hid headlights only this feature prevents the headlights from interfering with the vision of oncoming drivers. Headlight leveling automatically adjusts the height of the headlight beam in reaction to changes in vehicle pitch. Headlight delay to aid in your exit, your v...

  • Page 210

    Fog lights — if equipped the fog lights are turned on by rotating the headlight switch to the parking light or headlight position and pushing in the headlight rotary control. The fog lights will operate only when the parking lights are on or when the vehicle headlights are on low beam. An indicator ...

  • Page 211

    The brightness of the instrument panel lighting can be regulated by rotating the dimmer control up (brighter) or down (dimmer). When the headlights are on you can supplement the brightness of the odometer, trip odom- eter, radio and overhead console by rotating the control to its farthest position u...

  • Page 212

    Battery saver to protect the life of your vehicle’s battery, load shedding is provided for both the interior and exterior lights. If the ignition is off and any door is left ajar for 10 minutes or the dimmer control is rotated all the way up to the dome on position for 10 minutes, the interior light...

  • Page 213

    Each light can be turned on by pressing a switch on either side of the console. These buttons are backlit for night time visibility. To turn the lights off, press the switch a second time. The lights will also turn on when the unlock button on the remote keyless entry (rke) is pressed. Courtesy ligh...

  • Page 214

    Ambient light the overhead console is equipped with an ambient light feature. This light casts illumination for improved visibil- ity of the floor center console and prndl area. Multifunction lever the multifunction lever is located on the left side of the steering column. Ambient light multifunctio...

  • Page 215

    Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Note: if either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside l...

  • Page 216

    Windshield wipers and washers the windshield wiper/washer controls are located on the multifunction lever on the left side of the steering col- umn. The front wipers are operated by rotating a switch, located on the end of the lever. For information on the rear wiper/washer, refer to “rear window fe...

  • Page 217

    Windshield wiper operation rotate the end of the lever to one of the first four detent positions for intermittent settings, the fifth detent for low wiper operation and the sixth detent for high wiper operation. Caution! Always remove any buildup of snow that prevents the windshield wiper blades fro...

  • Page 218

    Intermittent wiper system use one of the four intermittent wiper settings when weather conditions make a single wiping cycle, with a variable delay between cycles, desirable. At driving speeds above 10 mph (16 km/h), the delay can be regulated from a maximum of approximately 18 seconds between cycle...

  • Page 219

    Lever is pushed while in the intermittent setting, the wipers will turn on and operate for several wipe cycles after the end of the lever is released, and then resume the intermittent interval previously selected. If the end of the lever is pushed while the wipers are in the off position, the wipers...

  • Page 220

    Note: the mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid. Rain sensing wipers — if equipped this feature senses moisture on the windshield and automaticall...

  • Page 221

    • the rain sensing feature may not function properly when ice, or dried salt water is present on the windshield. • use of rain-x威 or products containing wax or silicone may reduce rain sensing performance. • a customer programmable feature in the electronic vehicle information center (evic) allows t...

  • Page 222

    Tilt/telescoping steering column this feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column. To unlock the steering column, pus...

  • Page 223

    Power tilt/telescoping steering column — if equipped this feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering column lever is located below the multifunction lever on the steering column...

  • Page 224

    Note: for vehicles equipped with driver memory seat, you can use your remote keyless entry (rke) transmit- ter or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to pre- programmed positions. Refer to “driver memory seat” in this section for further in...

  • Page 225

    Note: the engine must be running for the heated steering wheel to operate. Vehicles equipped with remote start on models that are equipped with remote start, the heated steering wheel can be programmed to come on during a remote start. Refer to “remote starting system — if equipped” in “things to kn...

  • Page 226

    The electronic speed control buttons are located on the right side of the steering wheel. Note: in order to ensure proper operation, the elec- tronic speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the electronic ...

  • Page 227

    Warning! Leaving the electronic speed control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system off when you are not using it. To set a desired speed turn the elec...

  • Page 228

    To decrease speed while the electronic speed control is set, push the set (-) button. If the button is continually held in the set (-) position, the set speed will continue to decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be e...

  • Page 229

    Adaptive cruise control (acc) — if equipped adaptive cruise control (acc) increases the driving convenience provided by cruise control while traveling on highways and major roadways. However, it is not a safety system and not designed to prevent collisions. Acc will allow you to keep cruise control ...

  • Page 230

    Warning! • adaptive cruise control (acc) is a convenience system. It is not a substitute for active driving involvement. It is always the driver’s responsibility to be attentive of road, traffic, and weather condi- tions, vehicle speed, distance to the vehicle ahead; and, most importantly, brake ope...

  • Page 231

    Warning! You should switch off the acc system: • when driving in fog, heavy rain, heavy snow, sleet, heavy traffic, and complex driving situations (i.E., in highway construction zones). • when entering a turn lane or highway off ramp; when driving on roads that are winding, icy, snow- covered, slipp...

  • Page 232

    Note: the system will not react to preceding vehicles. Always be aware of the mode selected. You can change the mode by using the cruise control buttons. The two control modes function differently. Always confirm which mode is selected. Adaptive cruise control (acc) operation the speed control butto...

  • Page 233

    Note: any chassis/suspension modifications to the ve- hicle will effect the performance of the adaptive cruise control. Activating adaptive cruise control (acc) you can only activate acc if the vehicle speed is above 18 mph (30 km/h). When the system is turned on and in the ready state, the electron...

  • Page 234

    To activate push and release the on/off button. The acc menu in the evic displays “adaptive cruise control ready.” to turn the system off, push and release the on/off button again. At this time, the system will turn off and the evic will display “adaptive cruise control off.” warning! Leaving the ad...

  • Page 235

    Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs: • the message “driver override” will display in the evic. • the system will not be controlling the distance be- tween your vehicle and the vehicle ahead. The vehic...

  • Page 236

    To cancel the system will disable acc without erasing the memory if: • you softly tap the brake pedal. • you depress the brake pedal. • you press the cancel switch. • the speed of the vehicle goes below 15 mph (25 km/h). • an anti-lock brake system (abs) event occurs. • a trailer sway control (tsc) ...

  • Page 237

    To turn off the system will turn off and erase the set speed in memory if: • you push the on/off button. • you turn off the ignition. • you switch to four-wheel drive low. To resume speed press the res + button and release. Then remove your foot from the accelerator pedal. The evic will display the ...

  • Page 238

    Pressing the res + button once will result in a 1 mph (1.6 km/h) increase in set speed. Each subsequent tap of the button results in an increase of 1 mph (1.6 km/h). While acc is set, the set speed can be decreased by pressing and holding the set - button. If the button is continually pressed, the s...

  • Page 239

    Distance setting 3 distance setting 2 3 understanding the features of your vehicle 237.

  • Page 240

    To change the distance setting, press the distance button and release. Each time the button is pressed, the distance setting adjusts between long, medium, and short. If there is no vehicle ahead, the vehicle will maintain the set speed. If a slower moving vehicle is detected in the same lane, the ev...

  • Page 241

    The maximum braking applied by acc is limited; how- ever, the driver can always apply the brakes manually, if necessary. Note: the brake lights will illuminate whenever the acc system applies the brakes. A proximity warning will alert the driver if acc predicts that its maximum braking level is not ...

  • Page 242

    Adaptive cruise control (acc) menu the evic displays the current acc system settings. The evic is located in the upper part of the instrument cluster between the speedometer and the tachometer. The information it displays depends on acc system status. Menu button press the menu button (located on th...

  • Page 243

    The acc screen will display once again if any acc activity occurs, which may include any of the following: • set speed change • distance setting change • system cancel • driver override • system off • acc proximity warning • acc unavailable warning • the evic will return to the last display selected...

  • Page 244

    The “clean radar sensor in front of vehicle” message can sometimes be displayed while driving in highly reflective areas (i.E. Tunnels with reflective tiles, or ice and snow). The acc system will recover after the vehicle has left these areas. Under rare conditions, when the radar is not tracking an...

  • Page 245

    If weather conditions are not a factor, the driver should examine the sensor. It may require cleaning or removal of an obstruction. The sensor is located in the center of the vehicle behind the lower grille. To keep the acc system operating properly, it is impor- tant to note the following maintenan...

  • Page 246

    • installing a snow plow, front-end protector, an after- market grille or modifying the grille is not recom- mended. Doing so may block the sensor and inhibit acc operation. Removing acc sensor for off-roading note: when off-roading, it may be advisable to remove the acc sensor. The sensor is locate...

  • Page 247

    To reinstall the sensor and bracket assembly reverse the process above. The fastener torque required to assembly the bracket back to the beam is 6.6 ft lbs (9 n·m). Acc unavailable warning if the system turns off, and the evic displays “acc/ fcw unavailable, vehicle system error”, there may be a tem...

  • Page 248

    Offset driving acc may not detect a vehicle in the same lane that is offset from your direct line of travel. There will not be sufficient distance to the vehicle ahead. The offset vehicle may move in and out of the line of travel, which can cause your vehicle to brake or accelerate unexpectedly. Tur...

  • Page 249

    Using acc on hills when driving on hills, acc may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, acc perfor- mance may be limited. Lane changing acc will not detect a vehicle until it is completely in the lane in which you...

  • Page 250

    It is completely in the lane. There will not be sufficient distance to the lane-changing vehicle. Always be atten- tive and ready to apply the brakes if necessary. Narrow vehicles some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have...

  • Page 251

    Stationary objects and vehicles acc does not react to stationary objects and stationary vehicles. For example, acc will not react in situations where the vehicle you are following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if nece...

  • Page 252

    Warning! In the normal cruise control mode, the system will not react to vehicles ahead. In addition, the proximity warning does not activate and no alarm will sound even if you are too close to the vehicle ahead since neither the presence of the vehicle ahead nor the vehicle-to-vehicle distance is ...

  • Page 253

    To resume press the res + button and then remove your foot from the accelerator pedal. The evic will display the last set speed. To turn off the system will turn off and erase the set speed in memory if: • you push the on/off button. • you turn off the ignition. • you engage four-wheel drive low. If...

  • Page 254

    System determines a collision with the vehicle in front of you is no longer probable, the warning message will be deactivated. Note: • the minimum speed for fcw activation is 10 mph (16 km/h). • when entering or driving in a curve, the fcw alerts may be triggered on objects other than vehicles such ...

  • Page 255

    Changing fcw status the fcw feature can be set to far, set to near or turned off in the electronic vehicle information center (evic) refer to “electronic vehicle information center (evic)” in “understanding your instrument panel” for further in- formation. The fcw status off, near or far will be dis...

  • Page 256

    Changing the fcw status to the “near” setting, allows the system to warn you of a possible collision with the vehicle in front of you when you are much closer. This setting provides less reaction time than the “far” setting, which allows for a more dynamic driving experience. Changing the fcw status...

  • Page 257

    Note: • the system will retain the last setting selected by the driver after ignition shut down. • fcw will not react to irrelevant objects such as over- head objects, ground reflections, objects not in the path of the car, stationary objects that are far away, oncom- ing traffic, or leading vehicle...

  • Page 258

    There is an internal system fault. Although the vehicle is still drivable under normal conditions, have the system checked by an authorized dealer. Parksense 姞 rear park assist — if equipped the parksense 威 rear park assist system provides visual and audible indications of the distance between the r...

  • Page 259

    Parksense 姞 warning display the parksense 威 warning screen will only be displayed if sound and display is selected from the customer- pro- grammable features section of the electronic vehicle information center (evic). Refer to “electronic vehicle information center (evic)/personal settings (custome...

  • Page 260

    Parksense 姞 display when the vehicle is in reverse, the warning display will turn on indicating the system status. The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the evic display will show fe...

  • Page 261

    Slow tone fast tone 3 understanding the features of your vehicle 259.

  • Page 262

    The vehicle is close to the obstacle when the evic display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: continuous tone 260 understanding the features of your vehicle.

  • Page 263

    Warning alerts rear distance (in/cm) greater than 79 in (200 cm) 79-39 in (200-100 cm) 39-25 in (100-65 cm) 25-12 in (65-30 cm) less than 12 in (30 cm) audible alert chime none single 1/2 second tone slow fast continuous arcs none 3 solid (continuous) 3 slow flashing 2 slow flashing 1 slow flashing ...

  • Page 264

    “electronic vehicle information center (evic)” in “un- derstanding your instrument panel” for further informa- tion. When the shift lever is moved to reverse and the system is disabled, the evic will display the “park assist system off” message for as long as the vehicle is in reverse. The parksense...

  • Page 265

    Parksense 姞 system usage precautions note: • ensure that the rear bumper is free of snow, ice, mud, dirt and debris to keep the parksense 威 system operat- ing properly. • jackhammers, large trucks, and other vibrations could affect the performance of parksense 威. • when you turn parksense威 off, the ...

  • Page 266

    • on vehicles equipped with a tailgate, parksense威 should be disabled when the tailgate is in the lowered or open position and the vehicle is in reverse. A lowered tailgate could provide a false indication that an obstacle is behind the vehicle. Caution! • parksense威 is only a parking aid and it is ...

  • Page 267

    Warning! (continued) • before using the rear park assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the ve- hicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hit...

  • Page 268

    When displayed, static grid lines will illustrate the width of the vehicle while a dashed center-line will indicate the center of the vehicle to assist with aligning to a hitch/ receiver. The static grid lines will show separate zones that will help indicate the distance to the rear of the vehicle. ...

  • Page 269

    Caution! • to avoid vehicle damage, parkview威 should only be used as a parking aid. The parkview 威 camera is unable to view every obstacle or object in your drive path. • to avoid vehicle damage, the vehicle must be driven slowly when using parkview 威 to be able to stop in time when an obstacle is s...

  • Page 270

    Overhead console the overhead console contains courtesy/reading lights and storage for sunglasses. Universal garage door opener (homelink 威), power liftgate and power sunroof switches may also be included, if equipped. Front map/reading lights lights are mounted in the overhead console. Each light c...

  • Page 271

    To turn the lights off, press the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the unlock button on the rke is pressed. Courtesy lights the courtesy lights can be turned on by pressing the top corner of the lens. To turn the lights off, press...

  • Page 272

    Sunglasses bin door at the front of the console a compartment is provided for the storage of a pair of sunglasses. The storage compart- ment access is a “push/push” design. Push the chrome pad on the door to open. Push the chrome pad on the door to close. Garage door opener — if equipped homelink 威 ...

  • Page 273

    Note: homelink 威 is disabled when the vehicle secu- rity alarm is active. Homelink 威 buttons/overhead consoles homelink 威 buttons/sunvisor/headliner 3 understanding the features of your vehicle 271.

  • Page 274

    Before you begin programming homelink 姞 be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the ...

  • Page 275

    1. Cycle the ignition to the on/run position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the homelink 威 button you wish to program while keeping the homelink 威 indicator light in view. 3. Simultaneously press and hold both the homelink 威 button you want to program and the han...

  • Page 276

    5. At the garage door opener motor (in the garage), locate the “learn” or “training” button. This can usually be found where the hanging antenna wire is attached to the garage door opener/device motor. Firmly press and release the “learn” or “train- ing” button. On some garage door openers/devices t...

  • Page 277

    1. Cycle the ignition to the on/run position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the homelink 威 button you wish to program while keeping the homelink 威 indicator light in view. 3. Simultaneously press and hold both the homelink 威 button you want to program and the han...

  • Page 278

    Canadian/gate operator programming for programming transmitters in canada/united states that require the transmitter signals to “time-out” after several seconds of transmission. Canadian radio frequency laws require transmitter sig- nals to time-out (or quit) after several seconds of trans- mission ...

  • Page 279

    • to program the two remaining homelink威 buttons, repeat each step for each remaining button. Do not erase the channels. If you unplugged the garage door opener/device for programming, plug it back in at this time. Reprogramming a single homelink 威 button to reprogram a channel that has been previou...

  • Page 280

    Troubleshooting tips if you are having trouble programming homelink 威, here are some of the most common solutions: • replace the battery in the original hand-held transmitter. • press the learn button on the garage door opener to complete the training for a rolling code. • did you unplug the device ...

  • Page 281

    General information this device complies with fcc rules part 15 and industry canada rss-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause...

  • Page 282

    Power sunroof — if equipped the power sunroof switch is located between the sun visors on the overhead console. Warning! • never leave children in a vehicle with the key in the ignition switch (or with the ignition in the accessory or run position, for vehicles equipped with keyless enter-n-go™). Oc...

  • Page 283

    Opening sunroof — express press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automati- cally. This is called “express open”. During express open operation, any movement of the sunroof switch ...

  • Page 284

    Note: if three consecutive sunroof close attempts result in pinch protect reversals, the fourth close attempt will be a manual close movement with pinch protect disabled. Venting sunroof — express press and release the vent button within one half second and the sunroof will open to the vent position...

  • Page 285

    Ignition off operation the power sunroof switches remain active for up to approximately ten minutes after the ignition switch has been turned off. Opening either front door will cancel this feature. The time is programmable. Refer to “elec- tronic vehicle information center (evic)/personal set- ting...

  • Page 286

    Warning! • never leave children in a vehicle with the key in the ignition switch (or with the ignition in the accessory or run position, for vehicles equipped with keyless enter-n-go™). Occupants, particu- larly unattended children, can become entrapped by the power sunroof while operating the power...

  • Page 287

    Position. The sunroof will close fully and stop automati- cally. This is called “express close”. During express close operation, any movement of the switch will stop the sunroof. Closing sunroof — manual mode to close the sunroof, press and hold the switch in the forward position. Any release of the...

  • Page 288

    Pinch protect feature this feature will detect an obstruction in the opening of the sunroof during express close operation. If an ob- struction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruc- tion if this occurs. Next, press the switch forward and ...

  • Page 289

    Ignition off operation the power sunroof switches can be programmed to remain active for up to approximately ten minutes after the ignition switch has been turned off. Refer to “elec- tronic vehicle information center (evic)/customer- programmable features (system setup)” in “under- standing your in...

  • Page 290

    Caution! Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your new vehicle limited warranty. The front power outlet is located in...

  • Page 291

    The rear power outlet is located in the right rear cargo area. Center console outlet rear power outlet 3 understanding the features of your vehicle 289.

  • Page 292

    Note: the rear power outlet can be switched to “bat- tery” powered all the time by switching the power outlet right rear quarter panel fuse in the fuse panel. Power outlet right rear quarter panel fuse power outlet fuse locations 1 — m7 fuse 20 a yellow power outlet right rear quarter panel 2 — m6 f...

  • Page 293

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 294

    Power inverter — if equipped there is a 115 volt, 150 watt inverter outlet located on the back of the center console to convert dc current to ac current. This outlet can power cellular phones, electron- ics and other low power devices requiring power up to 150 watts. Certain high-end video games, su...

  • Page 295

    May have to be reset manually. To reset the inverter manually press the power inverter button off and on. To avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter. The power inverter switch is located on the switch bank below the climate con- trols....

  • Page 296

    Cupholders there are two cupholders for the front seat passengers located in the center console. There are two cupholders for the rear seat passengers located in the fold-down center armrest. Front cupholders rear cupholders 294 understanding the features of your vehicle.

  • Page 297

    Storage glove compartment the glove compartment is located on the right side of the instrument panel. To open the glove compartment, pull outward on the latch and lower the glove box door. Glove compartment opened glove compartment 3 understanding the features of your vehicle 295.

  • Page 298

    Door storage large storage areas are built into the door panels for easy access. Center console the center console contains both an upper and a lower storage area. To open the upper storage compartment, pull upward on the small latch located on the lid. Door panel storage storage compartment 296 und...

  • Page 299

    Lift upward on the larger of the latches to access the lower storage compartment. Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices (continued) storage compartment latches lower storage co...

  • Page 300

    Warning! (continued) should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury. Cargo area features rechargeable flashlight the rechargeable flashlight is mounted on the left side of the cargo area. The flashlight snap...

  • Page 301

    Cargo storage bins there are four removable storage bins located in the rear cargo area. There are two storage bins located on either side of the cargo area. Three-press switch rear storage bins 3 understanding the features of your vehicle 299.

  • Page 302

    Two additional storage bins are located under the load floor. To access the lower storage bins, raise the load floor and attach the tether hook (attached to the bottom of the load floor) to the liftgate opening. Tether strap lower storage bins 300 understanding the features of your vehicle.

  • Page 303

    Retractable cargo area cover — if equipped note: the purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover the cargo area: 1. Grasp the cover at the center handle. Pull it over the cargo area. 2. Insert the...

  • Page 304

    Warning! (continued) cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting. Do not store it in the vehicle. Rear cargo tie-downs the rear cargo tie-downs, located on the cargo area floor, should be used to safely secure loads when ...

  • Page 305

    Warning! • to help protect against personal injury, passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts. • cargo tie-down hooks are not safe anchors for a child seat t...

  • Page 306

    Rear window features rear window wiper/washer the rear wiper/washer controls are located on the mul- tifunction lever on the left side of the steering column. The rear wiper/washer is operated by rotating a switch, located at the middle of the lever. Rotate the center portion of the lever upward to ...

  • Page 307

    Rotating the center portion upward once more will activate the washer pump which will con- tinue to operate as long as the switch is held. Upon release of the switch, the wipers will resume the continuous rear wiper operation. When this rotary con- trol is in the off position, rotating it downward w...

  • Page 308

    Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements....

  • Page 309

    Desired position, keeping the crossbars parallel to the rack frame. Once the crossbar is in the desired position, retighten the with the wrench to lock the crossbar into position. Note: • to help control wind noise when the crossbars are not in use, place the front and rear crossbars approxi- mately...

  • Page 310

    Caution! (continued) • travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift to a load. This is especially true on large flat loads and may result in damage to th...

  • Page 311: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . .313 䡵 instrument cluster — premium . . . . . . .314 䡵 instrument cluster descriptions . . . . .315 䡵 electronic vehicle information center (evic) . . . . . . . . . . . . . . . . . . . . . . .325 ▫ electronic ...

  • Page 312

    ▫ keyless enter-n-go™ display — if equipped . . . . . . . . . . . . . . . . . . . . . . . . .347 ▫ compass / temperature display . . . . . . . . . .347 ▫ customer-programmable features (system setup) . . . . . . . . . . . . . . . . . . . . . . .350 䡵 uconnect威 730n/430/430n cd/dvd/hdd/ nav — if equi...

  • Page 313

    ▫ connecting the ipod威 or external usb device . . . . . . . . . . . . . . . . . . . . . . . . . . . . .385 ▫ using this feature. . . . . . . . . . . . . . . . . . . . .386 ▫ controlling the ipod威 or external usb device using radio buttons . . . . . . . . . . . . . . . . . . .387 ▫ play mode . . . . ...

  • Page 314

    ▫ system information . . . . . . . . . . . . . . . . . . . .413 䡵 steering wheel audio controls — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .428 ▫ radio operation . . . . . . . . . . . . . . . . . . . . . .429 ▫ cd player. . . . . . . . . . . . . . . . . . . . . . . . . . .430 ...

  • Page 315

    Instrument panel features 1 — air outlet 6 — lower switch bank 11 — hood release 2 — instrument cluster 7 — hazard switch 12 — fuel door release 3 — radio 8 — storage bin 13 — headlight switch 4 — glove compartment 9 — esc button 14 — dimmer control 5 — climate controls 10 — ignition switch 4 unders...

  • Page 316

    Instrument cluster — premium 314 understanding your instrument panel.

  • Page 317

    Instrument cluster descriptions 1. Tachometer indicates the engine speed in revolutions per minute (rpm x 1000). 2. Air bag warning light this light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to the on/run position. If the light is either not on d...

  • Page 318

    Caution! Prolonged driving with the mil on could cause damage to the engine control system. It also could affect fuel economy and drivability. If the mil is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. Warning! A malfunctioning catalytic ...

  • Page 319

    Each time the ignition is turned to on/run, the esc system will be on, even if it was turned off previously. The esc system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when esc becomes inactive following the maneuver that caused the esc activation. 5....

  • Page 320

    10. Electronic vehicle information center (evic) display/odometer display the odometer display shows the total distance the ve- hicle has been driven. U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle ha...

  • Page 321

    Accordingly, when the low tire pressure telltale illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fue...

  • Page 322

    Caution! (continued) equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Do not use tire sealant from a can or balance beads if your vehic...

  • Page 323

    System (abs) / electronic stability control (esc) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the abs pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual br...

  • Page 324

    The light also will turn on when the parking brake is applied with the ignition switch in the on/run position. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application . 15. Anti-lock brake (abs) light this light monitors the anti-lock brake sys...

  • Page 325

    17. Speedometer indicates vehicle speed. 18. Fuel door reminder the fuel pump symbol points to the side of the vehicle where the fuel door is located. 19. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. 20. Electronic vehicle inform...

  • Page 326

    24. Vehicle security light this light will flash rapidly for approximately 15 seconds when the vehicle theft alarm is arming. The light will flash at a slower speed continuously after the alarm is set. The security light will also come on for about three seconds when the ignition is first turned on....

  • Page 327

    Warning! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer for service if your vehicle overheats. If you decide to look under the hood yourself, see “maintaining your vehicle”. Follow the warnings unde...

  • Page 328

    The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: up button press and release the up button to scroll up- ward through the main menus (fuel economy, vehicle info, tire psi, cruise, messages, units, system setup, vehicle speed, trip in...

  • Page 329

    Back button press the back button to scroll back to a previous menu or sub-menu. Electronic vehicle information center (evic) displays the evic display consists of three sections: 1. The top line where compass direction, odometer line and outside temperature are displayed. 2. The main display area w...

  • Page 330

    • unstored messages this message type is displayed indefinitely or until the condition that activated the message is cleared. Examples of this message type are “turn signal on” (if a turn signal is left on) and “lights on” (if driver leaves the vehicle). • unstored messages until run these messages ...

  • Page 331

    • left front turn signal lamp out • right front turn signal lamp out • left rear turn signal lamp out • right rear turn signal lamp out • low tire pressure • esc system off • service blind spot system • blind spot detection unavailable • blind spot system off • blind spot system unavailable sensor b...

  • Page 332

    • driver override — if you apply the accelerator after setting the desired speed in the acc system. Refer to “adaptive cruise control (acc)” in “understanding the features of your vehicle” (if equipped). • distance set — after changing the desired following distance in the acc system, this message w...

  • Page 333

    • coolant low • service air suspension system • oil change due • key in ignition • lights on • key in ignition lights on • ignition or accessory on • ignition or accessory on. Lights on • turn signal on • park assist on • warning object detected • remote start aborted — door ajar • remote start abor...

  • Page 334

    • function currently unavailable — power liftgate • unlock to operate — power liftgate • put in park to operate — power liftgate • automatic high beams on • automatic high beams off • service four wheel drive system • eco — fuel saver indicator • terrain settings — automatic • terrain settings — roc...

  • Page 335

    • off road ride height level 2 — this message is displayed (for 5 seconds) when the vehicle has achieved the off road height level 2. • vehicle lowered to entry/exit (park) height — this message is displayed (for 5 seconds) when the vehicle has achieved the park height. • entry/exit (park) height in...

  • Page 336

    • vehicle cannot be lowered – door open — this message is displayed if a door or the liftgate is ajar and level control is suspended. • air suspension temporarily disabled for jacking and tire change • aerodynamic ride height — this is displayed (for 5 seconds) when the vehicle has achieved the aero...

  • Page 337

    • adaptive cruise control (acc) on this light will turn on when the acc is on. For further information, refer to “adaptive cruise control (acc)” in “understanding the features of your vehicle.” • adaptive cruise control (acc) set this light will turn on when the acc is set. For further information, ...

  • Page 338

    Evic amber telltale lights this area will show reconfigurable amber caution tell- tales. These telltales include: • forward collision warning (fcw) off this light warns the driver of a potential colli- sion with the vehicle in front and prompts the driver to take action in order to avoid the collisi...

  • Page 339

    A loose, improperly installed, or damaged fuel filler cap may also turn on the malfunction indicator light (mil). • windshield washer fluid low indicator this light will turn on to indicate the wind- shield washer fluid is low. • serv 4wd the serv 4wd light monitors the electric shift 4wd system. If...

  • Page 340

    • oil pressure warning light this telltale indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on. Do not operate the vehicle until the cause is corrected. This...

  • Page 341

    Required. You may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing. • engine temperature warning light this light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches h, this indicator will illuminate and...

  • Page 342

    Warning! If the transmission temperature warning light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. Engine oil change indicator system oil change due your v...

  • Page 343

    Vehicles not equipped with keyless enter-n-go™ 1. Turn the ignition switch to the on/run position (do not start the engine.) 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Turn the ignition switch to the off/lock position. Note: if the indicator message illuminates...

  • Page 344

    (mds) (if equipped) allows the engine to operate on four cylinders, or if you are driving in a fuel efficient manner. This feature allows you to monitor when you are driving in a fuel efficient manner, and it can be used to modify driving habits in order to increase fuel economy. Distance to empty (...

  • Page 345

    Cruise control press and release the up or down button until “acc” (if equipped with adaptive cruise control) or “cruise” is highlighted in the evic. Status of the acc or cruise is displayed in the menu line also. Press and release the select (right arrow) button to display the following information...

  • Page 346

    Trip info trip a shows the total distance traveled for trip a since the last reset. Trip b shows the total distance traveled for trip b since the last reset. Elapsed time shows the total elapsed time of travel since the last reset when the ignition switch is in the acc position. Elapsed time will in...

  • Page 347

    Vehicle info (customer information features) press and release the up or down button until “vehicle info” displays in the evic and press the select button. Press the up and down button to scroll through the available information displays, then press select to display any one of the following choices...

  • Page 348

    • tire pressure monitor system (shows the current pres- sure of all four road tires). For additional information, refer to “tire pressure monitor system” in “starting and operating”. Note: • tires heat up during normal driving conditions. Heat will cause the tire pressure to increase from 2 to 6 psi...

  • Page 349

    Than one message to step through the remaining stored messages. Pressing the back button takes you back to the main menu. Turn menu off select from main menu using the down button. Press- ing the select button blanks the menu display. Pressing any one of the four steering wheel buttons brings the me...

  • Page 350

    New, the compass may appear erratic and the evic will display cal until the compass is calibrated. You may also calibrate the compass by completing one or more 360–degree turns (in an area free from large metal or metallic objects) until the cal indicator displayed in the evic turns off. The compass...

  • Page 351

    1. Turn the ignition switch on. 2. Press the up or down button until the setup (customer-programmable features) menu is reached, then press the select button. 3. Press the down button until the “compass variance” message is displayed in the evic, then press the select button. The last variance zone ...

  • Page 352

    1. Turn on the ignition switch. 2. Press the up or down button until the setup (customer-programmable features) menu is reached, then press the select button. 3. Press the down button until “calibrate compass” is displayed in the evic. 4. Press and release the select button to start the calibration....

  • Page 353

    To select english, spanish (español), french (français), italian (italiano), german (deutsch), and dutch (neder- lands). Then, as you continue, the information will dis- play in the selected language. Nav–turn by turn when this feature is selected, the navigation system utilizes voice commands, guid...

  • Page 354

    Note: if the vehicle is equipped with keyless enter-n- go™ (passive entry) and the evic is programmed to unlock all doors 1st press, all doors will unlock no matter which passive entry equipped door handle is grasped. If driver door 1st press is programmed, only the driver’s door will unlock when th...

  • Page 355

    A check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Horn with remote lock when this feature is selected, a short horn sound will occur when the rke transmitter lock button is pressed. This feature may be...

  • Page 356

    Then press and release the select button until a check- mark appears next to the setting, showing that the setting has been selected. Headlamps with wipers (available with automatic headlamps only) when this feature is selected, and the headlight switch is in the auto position, the headlights will t...

  • Page 357

    Reverse position. The mirrors will move back to their previous position when the transmission is shifted out of reverse. To make your selection, press and release the select button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showi...

  • Page 358

    Or unlock buttons. To make your selection, press and release the select button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Refer to “keyless enter-n-go™” in “things to know before starting ...

  • Page 359

    Blind spot alert there are three selections when operating blind spot alert. By pressing and releasing the select button once, the blind spot alert feature can be activated in “blind spot: lights only” mode. When this mode is selected the blind spot monitor (bsm) system is activated and will only sh...

  • Page 360

    And release the select button until a check-mark ap- pears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. For further information, refer to ”adaptive cruise con- trol (acc)” in “understanding the features of your vehicl...

  • Page 361

    Calibrate compass refer to “compass display” for more information. Compass variance refer to “compass display” for more information. Uconnect 姞 730n/430/430n cd/dvd/hdd/nav — if equipped refer to your uconnect 威 730n, 430 or 430n user’s manual for detailed operating instructions. Operating instructi...

  • Page 362

    Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume control the electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turn- ing th...

  • Page 363

    Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either am or fm frequencies. Tune control turn the rotary tune/scroll control knob clockwise to increase or counterclockwise to decre...

  • Page 364

    Am/fm button press the buttons to select either am or fm mode. Set/rnd button — to set the pushbutton memory when you are receiving a station that you wish to commit to pushbutton memory, press the set/rnd button. The symbol set 1 will now show in the display window. Select the button (1 to 6) you w...

  • Page 365

    Operation instructions — cd mode for cd and mp3 audio play note: • the ignition switch must be in the on or acc position to operate the radio. • this radio is capable of playing compact discs (cd), recordable compact discs (cd-r), rewritable compact discs (cd-rw), compact discs with mp3 tracks and m...

  • Page 366

    Seek button press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the first second of the current selection. Pressing and holding the seek ...

  • Page 367

    Supported media (disc types) the mp3 file recording media supported by the radio are cdda, cd-r, cd-rw, mp3, and cdda+mp3. Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded...

  • Page 368

    Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 files. Non-mp3 files named with the *.Mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to co...

  • Page 369

    Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading times for playback of mp3 files may be affected by the following: • med...

  • Page 370

    Note: the aux device must be turned on and the device’s volume set to proper level. If the aux audio is not loud enough, turn the device’s volume up. If the aux audio sounds distorted, turn the device’s volume down. Time button (auxiliary mode) press this button to change the display to time of day....

  • Page 371

    Operating instructions — radio mode note: the ignition switch must be in the on/run or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume ...

  • Page 372

    If your vehicle is not equipped with or this feature is not available on your vehicle, a “not equipped with uconnect phone” message will display on the radio screen. Time button press the time button to alternate display of the time and radio frequency. Clock setting procedure 1. Press and hold the ...

  • Page 373

    Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either am or fm frequencies. Tune control turn the rotary tune/scroll control knob clockwise to increase or counterclockwise to decre...

  • Page 374

    Or turning the tune/scroll control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently broadcast music type information. Toggle the music type button to select the following format types: program type 16-digit character display no progra...

  • Page 375

    Program type 16-digit character display sports sports talk talk top 40 top 40 weather weather by pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected music type name. The music type function only operates when in...

  • Page 376

    Button. The symbol set 1 will now show in the display window. Select the button (1–6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the set/ rnd button, the station will continue to play but will not be stored int...

  • Page 377

    Inserting compact disc(s) gently insert one cd into the cd player with the cd label facing up. The cd will automatically be pulled into the cd player and the cd icon will illuminate on the radio display. If a cd does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and mu...

  • Page 378

    A disc can be ejected with the radio and ignition off. Note: ejecting with the ignition off is not allowed on convertible or soft-top models (if equipped). Seek button press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current s...

  • Page 379

    Notes on playing mp3 files the radio can play mp3 files; however, acceptable mp3 file recording media and formats are limited. When writing mp3 files, pay attention to the following restrictions. Supported media (disc types) the mp3 file recording media supported by the radio are cdda, cd-r, cd-rw, ...

  • Page 380

    Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal cd audio tracks and computer files (including mp3 files). Discs created with an option such as ⬙keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for c...

  • Page 381

    Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading times for playback of mp3 files may be affected by the following: • med...

  • Page 382

    Press and hold the info button again for three seconds to return to ⬙elapsed time⬙ display. Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3 player or cassette player and utilize the vehicle’s au...

  • Page 383

    System activation sirius satellite radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, includ...

  • Page 384

    Decreased performance. Larger luggage items such as bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly on or above the antenna. Reception quality satellite reception may be interrupted due to one of the following reasons: • the vehi...

  • Page 385

    Info button pressing the info button will cycle the display informa- tion between artist, song title, and composer (if avail- able). Also, pressing and holding the info button for an additional three seconds will make the radio display the song title all of the time (press and hold again to return t...

  • Page 386

    Setup button pressing the setup button allows you to select the following items: • display sirius id number — press the audio/ select button to display the sirius id number. This number is used to activate, deactivate, or change the sirius subscription. Set button – to set the pushbutton memory when...

  • Page 387

    Ipod 姞 /usb/mp3 control — if equipped this feature allows an ipod 威 or external usb device to be plugged into the usb port, located in the center console or glove compartment. Ipod 威 control supports mini, 4g, photo, nano, 5g ipod威 and iphone 威 devices. Some ipod威 software versions may not fully sup...

  • Page 388

    Note: the center console will have a position where the ipodt or consumer electronic audio device cable can be routed through without damaging the cable when clos- ing the lid. A factory cut out space for the cable to be routed may be located in the base of the center console on either the front or ...

  • Page 389

    Controlling the ipod 姞 or external usb device using radio buttons to get into the ipod 威/usb/mp3 control mode and access a connected audio device, either press the “aux” button on the radio faceplate or press the vr button and say ⬙usb⬙ or ⬙switch to usb⬙. Once in the ipod威/usb/mp3 control mode, aud...

  • Page 390

    During play mode will jump to the next track in the list, or press the vr button and say ⬙next or previous track ⬙. • while a track is playing, press the info button to see the associated metadata (artist, track title, album, etc.) for that track. Pressing the info button again jumps to the next scr...

  • Page 391

    • turning it clockwise (forward) and counterclockwise (backward) scrolls through the lists, displaying the track detail on the radio display. Once the track to be played is highlighted on the radio display, press the tune control knob to select and start playing the track. Turning the tune control k...

  • Page 392

    • music type button: the music type button is another shortcut button to the genre listing on your audio device. Caution! • leaving the ipod威 or external usb device (or any supported device) anywhere in the vehicle in ex- treme heat or cold can alter the operation or dam- age the device. Follow the ...

  • Page 393

    Play mode when switched to btsa mode, some audio devices can start playing music over the vehicle’s audio system, but some devices require the music to be initiated on the device first, then it will get streamed to the uconnect 威 phone system. Seven devices can be paired to the uconnect 威 phone syst...

  • Page 394

    Uconnect 姞 multimedia — video entertainment system (ves)™ — if equipped getting started • screen located in the overhead console: unfold the overhead lcd screen by pushing the button in the center of the overhead console behind the screen. • with the ignition switch in the on or acc position, turn t...

  • Page 395

    • when the video screen are open and a dvd is inserted into the ves™ player, the screen turns on automati- cally, the headphone transmitters turn on and play- back begins. Single video screen note: typically there are two different ways to operate the features of the video entertainment system (ves)...

  • Page 396

    Using the remote control 1. Press the mode button on the remote control. 2. While looking at screen 1, highlight disc by either pressing up/down/left/right buttons or by repeat- edly pressing the mode button, then press enter. Note: • channel/screen 1 select mode information is shown on the left sid...

  • Page 397

    Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to display the rear ves controls. If a channel list appears on the right side of the screen, touch the hide list soft-key to display the rear ves controls screen. 3. Touch the 1 so...

  • Page 398

    Note: the “1” and “2” soft-keys are displayed for the headphone channels. Touch 1 or 2 based on which channel you want to change, select the new mode from the available list on the right. Modes that are unavailable are greyed-out. Note: • to view a dvd on the radio press the radio/media hard-key, on...

  • Page 399

    • viewing a dvd on the touch-screen radio screen is not available in all states/provinces, and the vehicle must be stopped, and the shift lever must be in the park position for vehicles with automatic transmis- sion. In vehicles with manual transmission the parking brake must be engaged. • touching ...

  • Page 400

    When connecting an external source to the aux input, be sure to follow the standard color coding for the ves™ jacks: note: certain high-end video games, such as playsta- tion3 and xbox360 will exceed the power limit of the vehicle’s power inverter. Refer to the power inverter section in your vehicle...

  • Page 401

    2. Touch the rear ves soft-key to display the rear ves controls. If a channel list is displayed, press the hide list soft-key to display the rear ves controls screen. 3. Touch the 1 soft-key and then touch aux 1 in the ves column. To exit press the back arrow soft-key at the top of the screen. Rear ...

  • Page 402

    Listen to an audio source on channel 2 while a video is playing on channel 1 ensure the remote control and headphone switch is on channel 2. Using the remote control 1. Press the mode button on the remote control and the mode select screen will display, unless a video is playing then only a small ba...

  • Page 403

    2. Touch the rear ves soft-key to display the rear ves controls. If a channel list is displayed, press the hide list soft-key to display the rear ves controls screen. 3. To listen to an audio source on channel 2 while a video is playing on channel 1, touch the 2 soft-key and choose an audio source. ...

  • Page 404

    Important notes for single video screen system • ves™ is able to transmit two channels of stereo audio simultaneously. • in split screen mode the left side equates to channel 1 and right side equates to channel 2. • if a video source is selected on channel 1, then channel 2 is for audio only. Select...

  • Page 405

    Using the remote control 1. Press the mode button on the remote control. 2. While looking at screen 1, highlight disc by either pressing up/down/left/right buttons or by repeat- edly pressing the mode button, then press enter. Note: • channel/screen 1 select mode information is shown on the left sid...

  • Page 406

    Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to display the rear ves controls. If a channel list is displayed, press the hide list soft-key to display the rear ves controls screen. 3. Touch the 1 or 2 soft-key and then the di...

  • Page 407

    Note: • to view a dvd on the radio press the radio/media hard-key, on the radio faceplate, then touch the disc tab soft-key and then the view video soft-key. • viewing a dvd on the touch-screen radio screen is not available in all states/provinces, and the vehicle must be stopped, and the shift leve...

  • Page 408

    2. Channel selector indicators – when a button is pressed, the currently affected channel or channel button is illuminated momentarily. 3. Light – turns the remote control backlighting on or off. The remote backlighting turns off automatically after five seconds. 4. Channel/screen selector switch - ...

  • Page 409

    8. 䉴 / 㥋 (play/pause) – begin/resume or pause disc play. 9. ▪ (stop) – stops disc play. 10. Prog up/down – when listening to a radio mode, pressing prog up selects the next preset and press- ing prog down selects the previous preset stored in the radio. When listening to compressed audio on a data d...

  • Page 410

    17. 䉳䉳 – in radio modes, press to seek to the previous tunable station. In disc modes, press and hold to fast rewind through the current audio track or video chapter. In satellite video mode, press to advance to the previous channel. In menu modes use to navigate in the menu. 18. Enter – press to se...

  • Page 411

    Locking the remote control all remote control functionality can be disabled as a parental control feature. • to disable the remote control from making any changes, press the video lock button on the dvd player (if equipped). If the vehicle is not equipped with a dvd player, follow the radio’s instru...

  • Page 412

    Headphones operation the headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for ...

  • Page 413

    Controls the headphone power indicator and controls are located on the right ear cup. Note: the rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video sys...

  • Page 414

    Replacing the headphone batteries each set of headphones requires two aaa batteries for operation. To replace the batteries: • locate the battery compartment on the left ear cup of the headphones, and then slide the battery cover downward. • replace the batteries, making sure to orient them accordin...

  • Page 415

    May not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may also have other rights, which vary from jurisdiction to jurisdiction. What will unwired 威 do? Unwired威, at its option...

  • Page 416

    Mode, but not change stations until the radio mode is changed to a mode that is different from the ves™ selected radio mode. When shared, the radio has priority over the ves™ or all radio modes (fm, am, and sat). The ves™ has the ability to switch tuner (am/fm), seek, scan, tune, and recall presets ...

  • Page 417

    1. Channel 1 mode 2. Channel 1 shared status 3. Channel 1 audio only/mute 4. Channel 2 mode 5. Channel 2 shared status 6. Channel 2 audio only/mute 7. Channel 1 enter button action 8. Channel 2 enter button action 9. Clock 10. Video lock 11. Not available / error 12. Disc changer status numeric keyp...

  • Page 418

    Screen makes it easy to enter a specific tuner frequency, satellite channel, or track number. To enter the desired digit: 1. Press the remote control’s navigation buttons ( 䉱, 䉲, 䉴, 䉳) to navigate to the desired digit. 2. When the digit is highlighted, press the remote con- trol’s enter button to se...

  • Page 419

    Screen makes it easy to enter a specific tuner frequency, satellite channel, or track number. To enter the desired digit: 1. Press the remote control’s navigation buttons ( 䉱, 䉲, 䉴, 䉳) to navigate to the desired digit. 2. When the digit is highlighted, press the remote con- trol’s enter button to se...

  • Page 420

    Disc menu when listening to a cd audio or cd data disc, pressing the remote control’s menu button displays a list of all com- mands which control playback of the disc. Using the options you can activate or cancel scan play and random play. Display settings when watching a video source (dvd video wit...

  • Page 421

    To change the settings, press the remote control’s navi- gation buttons ( 䉱, 䉲) to select an item, then press the remote control’s navigation buttons ( 䉴, 䉳) to change the value for the currently selected item. To reset all values back to the original settings, select the default settings menu optio...

  • Page 422

    Disc formats the ves™ dvd player is capable of playing the follow- ing types of discs (12 mm or 8 mm diameter): • dvd-video discs (mpeg-2 video compression) (see notes about dvd region codes) • dvd-audio discs (2 channel audio output only) • audio compact discs (cds) • cd data discs with mp3 and wma...

  • Page 423

    If you record a disc using a personal computer, there may be cases where the ves™ dvd player may not be able to play some or the entire disc, even if it is recorded in a compatible format and is playable on other players. To help avoid playback problems, use the following guide- lines when recording...

  • Page 424

    Compressed audio files (mp3 and wma) the dvd player is capable of playing mp3 (mpeg-1 audio layer 3) and wma (windows media audio) files from a cd data disc (usually a cd-r or cd-rw). • the dvd player always uses the file extension to determine the audio format, so mp3 files must always end with the...

  • Page 425

    Disc errors if the dvd player is unable to read the disc, a ⬙disc error⬙ message is displayed on the ves™ and radio displays and the disc is automatically ejected. A dirty, damaged, or incompatible disc format are all potential causes for a ⬙disc error⬙ message. If a disc has a damaged track which r...

  • Page 426

    All of the language settings have a special ⬙other⬙ setting to accommodate languages other than japanese or eng- lish. These languages are selected using a special four- digit code. To enter a new language code, activate the dvd setup menu and follow these additional instructions: • using the remote...

  • Page 427

    Them where lower numbers are designated for all audi- ences and higher numbers are designated for more adult audiences. When a dvd-video disc is loaded, its rating is compared to the setting in the dvd player. If the rating of the disc is higher than the setting in the player, a password screen is d...

  • Page 428

    To set the password, activate the dvd setup menu and follow these additional instructions: • using the remote control left and right cursor but- tons, select the rating tab. • highlight ⬙change password⬙, and then press the remote control’s enter button. • enter the current password. Select a digit,...

  • Page 429

    To set the rating, activate the dvd setup menu and follow these additional instructions: • using the remote control’s left and right cursor buttons, select the rating tab. • highlight ⬙change rating⬙, and then press the remote control’s enter button. • enter the current password. Select a digit, use...

  • Page 430

    • using the remote control’s up and down cursor buttons, select the new rating level, and then press the remote control’s enter button to accept the change. Product agreement this product incorporates copyright protection technol- ogy that is protected by u.S. Patents and other intellec- tual proper...

  • Page 431

    The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume. Pressing the center button will ...

  • Page 432

    Cd player pressing the top of the switch once will go to the next track on the cd. Pressing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the previous track if it is within one second after the current track begins to play. If you press the switc...

  • Page 433

    6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may become too high. Note: if you experience difficulty in playing a particu- lar disc, it may be damaged (i.E., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have pr...

  • Page 434

    Dual-zone manual heating and air conditioning the dual-zone manual climate controls allow both driver and front passenger seat occupants to select indi- vidual comfort settings. The controls consist of a series of outer rotary dials and inner push knobs. Blower control rotate this control to regulat...

  • Page 435

    • passenger temperature control rotate this control to regulate the tem- perature of the air inside the passenger compartment for the right front seat occupant. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warm...

  • Page 436

    Note: for all settings, except full cold or full hot, there is a difference in temperature between the upper and lower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but cool conditions. Floor air is directed through the floor outlets with a smal...

  • Page 437

    Recirculation control pressing the recirculation control button will put the system in recirculation mode. This can be used when outside conditions such as smoke, odors, dust, or high humidity are pres- ent. Activating recirculation will cause the led in the control button to illuminate. Note: • con...

  • Page 438

    Air conditioning control press this button to engage the air con- ditioning. A light will illuminate when the air conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer temperatures...

  • Page 439

    • when occupants in the vehicle select an auto mode operation, auto blower operation is set by using a push button on the control unit and a comfort tem- perature setting by using the temperature up and down buttons. • the system provides set-and-forget operation for op- timum comfort and convenienc...

  • Page 440

    2. Recirculation control button press and release to change the current setting, the indicator illuminates when on. 3. Left front seat occupant temperature display this display shows the temperature setting for the left front seat occupant. 4. Mode display this display shows the current mode selecti...

  • Page 441

    10. Auto temperature control button controls airflow temperature, distribution, volume, and the amount of air recirculation automatically. Press and release to select. Refer to “automatic operation” for more information. Performing this function will cause the atc to switch between manual mode and a...

  • Page 442

    Automatic operation 1. Press the auto button on the automatic temperature control (atc) panel. 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver and front passenger temperature control buttons. Once the de- sired temperature is displayed, the system will a...

  • Page 443

    Blower control there are seven fixed blower speeds. Use the outer dial control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise and decreases when you move the control counter- clockwise. The blower fan speed...

  • Page 444

    Floor mode air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix mode air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while k...

  • Page 445

    Note: • if the system is in mix, floor or defrost mode, the a/c can be turned off, but the a/c system shall remain active to prevent fogging of the windows. • if fog or mist appears on the windshield or side glass, select defrost mode and increase blower speed. Recirculation control when outside air...

  • Page 446

    As the temperature gets colder, it may be necessary to direct air onto the windshield. Adjust the temperature control and blower speed to maintain comfort. Higher blower speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the defrost mode. Regular clean...

  • Page 447

    Operating tips chart 4 understanding your instrument panel 445.

  • Page 449: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . .453 ▫ automatic transmission . . . . . . . . . . . . . . . .453 ▫ keyless enter-n-go™ . . . . . . . . . . . . . . . . . .454 ▫ normal starting. . . . . . . . . . . . . . . . . . . . . . .455 ▫ extreme cold weather (...

  • Page 450

    ▫ quadra-trac ii威 operating instructions/ precautions – if equipped . . . . . . . . . . . . . . .482 ▫ shift positions . . . . . . . . . . . . . . . . . . . . . . . .483 ▫ shifting procedures . . . . . . . . . . . . . . . . . . . .484 ▫ quadra-drive威 ii system – if equipped . . . . . .487 䡵 selec-te...

  • Page 451

    ▫ power steering fluid check . . . . . . . . . . . . . .504 䡵 fuel saver technology (if equipped) — 5.7l engine only . . . . . . . . . . . . . . . . . . . . .505 䡵 parking brake . . . . . . . . . . . . . . . . . . . . . .505 䡵 electronic brake control system . . . .507 ▫ anti-lock brake system (abs)...

  • Page 452

    ▫ tire pressures for high speed operation . . . .535 ▫ radial ply tires . . . . . . . . . . . . . . . . . . . . . .535 ▫ all season tires – if equipped . . . . . . . . . . . .535 ▫ summer or three season tires – if equipped. .536 ▫ snow tires . . . . . . . . . . . . . . . . . . . . . . . . . .536 ▫ ...

  • Page 453

    ▫ mmt in gasoline . . . . . . . . . . . . . . . . . . . . .557 ▫ materials added to fuel . . . . . . . . . . . . . . . .558 ▫ fuel system cautions. . . . . . . . . . . . . . . . . . .558 ▫ carbon monoxide warnings . . . . . . . . . . . . .559 䡵 flexible fuel (3.6l engine only) — if equipped . . . . ...

  • Page 454

    ▫ towing tips . . . . . . . . . . . . . . . . . . . . . . . . .584 䡵 snow plow . . . . . . . . . . . . . . . . . . . . . . . . .585 䡵 recreational towing (behind motorhome, etc.) . . . . . . . . . . . . . . . . . . .586 ▫ towing this vehicle behind another vehicle . .586 ▫ recreational towing – two-...

  • Page 455

    Starting procedures before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. Warning! • when leaving the vehicle, always remove the key fob from the ignition and lock your ve...

  • Page 456

    Caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • do not shift from reverse, park, or neutral into any forward gear when the engine is above idle speed. • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse...

  • Page 457

    Installing and removing the engine start/stop button installing the button 1. Remove the key fob from the ignition switch. 2. Insert the engine start/stop button into the ignition switch with the lettering facing up and readable. 3. Press firmly on the center of the button to secure it into position...

  • Page 458

    To turn off the engine using engine start/stop button 1. Place the shift lever in park, then press and release the engine start/stop button. 2. The ignition switch will return to the off position. 3. If the shift lever is not in park, the engine start/ stop button must be held for two seconds and ve...

  • Page 459

    • press the engine start/stop button a second time to change the ignition switch to the run position (evic displays “ignition mode run”), • press the engine start/stop button a third time to return the ignition switch to the off position (evic displays “ignition mode off”). Extreme cold weather (bel...

  • Page 460

    Warning! (continued) • if the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly. Refer to “jump starting” in “what to do in emergen- cies” for further informa...

  • Page 461

    The starter motor will disengage automatically in 10 sec- onds. Once this occurs, release the accelerator pedal, turn the ignition switch to the lock position, wait 10 to 15 seconds, then repeat the “normal starting” procedure. Caution! To prevent damage to the starter, wait 10 to 15 sec- onds befor...

  • Page 462

    Automatic transmission caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse only after the vehicle has come to a complete stop and the engine is at idle spee...

  • Page 463

    Warning! (continued) • it is dangerous to shift out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in re- verse. You could lose control of the vehicle and hit someone or something....

  • Page 464

    Turned to the on/run position (engine running or not; engine running, for vehicles with 8-speed transmission) and the brake pedal must be pressed. In 8-speed vehicles, the brake pedal must also be pressed to shift from neutral into drive or reverse when the vehicle is stopped or moving at low speeds...

  • Page 465

    Gear ranges do not race the engine when shifting from park or neutral into another gear range. If there is a need to restart the engine, be sure to cycle the ignition to the lock/off position before restarting. Transmission gear engagement may be delayed after restarting the engine if the key is not...

  • Page 466

    Move the shift lever out of park. As an added precau- tion, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard aga...

  • Page 467

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park turn the engine off, and re...

  • Page 468

    Caution! • before moving the shift lever out of park, you must turn the ignition switch from the off posi- tion to the on/run position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • do not race the engine when shifting from park or neutral into another gear ran...

  • Page 469

    Warning! (continued) practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. Caution! Towing the vehicle, coasting, or driving for any other reason with the transmission in neutral can cause severe transmission damage. Re...

  • Page 470

    In direct gear regardless of which forward gear is se- lected. Park, reverse, and neutral will continue to operate. The malfunction indicator light (mil) may be illuminated. Limp home mode allows the vehicle to be driven to an authorized dealer for service without dam- aging the transmission. In the...

  • Page 471

    You can switch between drive and ers mode at any vehicle speed. When the shift lever is in the drive position, the transmission will operate automatically, shifting between all available gears. Tapping the shift lever to the left (-) will downshift the transmission, activate ers mode, display the cu...

  • Page 472

    Overdrive operation the automatic transmission includes an electronically controlled overdrive (fifth gear). The transmission will automatically shift into overdrive if the following con- ditions are present: • the shift lever is in the drive position, • vehicle speed is sufficiently high, and • the...

  • Page 473

    Gear ranges do not race the engine when shifting from park or neutral into another gear range. Note: after selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. Park this range supplements the parking b...

  • Page 474

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to mo...

  • Page 475

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park turn the engine off, and re...

  • Page 476

    Caution! • before moving the shift lever out of park, you must turn the ignition switch from the off posi- tion to the on/run position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • do not race the engine when shifting from park or neutral into another gear ran...

  • Page 477

    Warning! Do not coast in neutral and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. Caution! Towing the vehicle, coasting, or driving for any oth...

  • Page 478

    Range will improve performance and extend transmission life by reducing excessive shifting and heat buildup. If the transmission temperature exceeds normal operat- ing limits, the powertrain controller will modify the transmission shift schedule and expand the range of torque converter clutch engage...

  • Page 479

    Transmission limp home mode transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, transmission limp home mode is activated. In this mode, the transmission remains in direct gear regardless of which forward gear...

  • Page 480

    Electronic range select (ers) operation the electronic range select (ers) shift control allows the driver to limit the highest available gear when the shift lever is in the drive position. For example, if you shift the transmission into 3 (third gear), the transmission will never shift above third g...

  • Page 481

    Warning! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing an accident or personal injury. Note: to select the proper gear position for maximum deceleration (engine braking), simply press and hold the shif...

  • Page 482

    When to use tow/haul mode when driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the tow/haul switch to activate tow/ haul mode. This will improve performance and reduce the potential for transmission overheating or failure due ...

  • Page 483

    Torque converter clutch a feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automati- cally at calibrated speeds. This may result in a slightly different feeling or response during normal operation i...

  • Page 484

    Four-wheel drive operation quadra-trac i 姞 operating instructions/ precautions – if equipped the quadra-trac i 威 is a single-speed (hi range only) transfer case, which provides convenient full-time four- wheel drive. No driver interaction is required. The brake traction control (btc) system, which c...

  • Page 485

    When operating your vehicle in 4wd low, the engine speed is approximately three times that of the 4wd hi position at a given road speed. Take care not to overspeed the engine and do not exceed 25 mph (40 km/h). Proper operation of four-wheel drive vehicles depends on tires of equal size, type, and c...

  • Page 486

    Neutral this range disengages both the front and rear driveshafts from the powertrain. It is to be used for flat towing behind another vehicle. Refer to “recreational towing” in “starting and operating” for further information. 4wd low this range is for low speed four-wheel drive. It locks the front...

  • Page 487

    Note: if shift conditions/interlocks are not met, or a transfer case motor temperature protection condition exists, a “for 4x4 low slow below 3 mph or 5 kph put trans in n press 4 low” message will flash from the electronic vehicle information center (evic). Refer to “electronic vehicle information ...

  • Page 488

    Note: • if shift conditions/interlocks are not met, or a transfer case motor temperature protection condition exists, a “for 4x4 high slow below 3 mph or 5 kph put trans in n press 4 low” message will flash from the elec- tronic vehicle information center (evic). Refer to “electronic vehicle informa...

  • Page 489

    5. Repeat steps 1 to 4 to shift out of neutral. Note: if shift conditions/interlocks are not met, a “to tow vehicle safely, read neutral shift procedure in owners manual” message will flash from the electronic vehicle information center (evic). Refer to “electronic vehicle information center (evic)”...

  • Page 490

    With a traction difference between left and right wheels, the coupling will sense a speed difference. As one wheel begins to spin faster than the other, torque will automatically transfer from the wheel that has less traction, to the wheel that has traction. While the transfer case and axle coupling...

  • Page 491

    To allow more driver control of vehicle while maintain- ing safe handling controls. The vehicle will lower (if equipped with air suspension) to aero mode in high range. 4wd low is not available in sport mode, if 4wd low is selected the selec-terrain™ will auto- matically switch back to auto. • snow ...

  • Page 492

    Equipped with air suspension, the vehicle level will change to off-road 2. If the selec-terrain™ switch is in rock mode, and the transfer case is switched from 4wd low to 4wd high, the selec-terrain™ system will return to auto. Electronic vehicle information center (evic) display messages when the a...

  • Page 493

    • normal ride height (nrh) – this is the standard position of the suspension and is meant for normal driving. • off-road 1 (or1) (raises the vehicle approximately 1.3 in (33 mm) – this is the primary position for all off-road driving until or2 is needed. A smoother and more comfortable ride will res...

  • Page 494

    Selec-terrain™ knob is turned to the “sport” posi- tion. Turning the selec-terrain™ knob to the “auto” position will return the system to normal operation. • park mode (lowers the vehicle approximately 1.5 in (38 mm) – this position lowers the vehicle for easier passenger entry and exit as well as l...

  • Page 495

    After the engine is turned off, it may be noticed that the air suspension system operates briefly, this is normal. The system is correcting the position of the vehicle to ensure a proper appearance. To assist with changing a spare tire, the quadra-lift™ air suspension system has a feature which allo...

  • Page 496

    Lamps will show a position which the system is working to achieve. When raising, if multiple indicator lamps are flashing on the “up” button, the highest flashing indica- tor lamp is the position the system is working to achieve. When lowering, if multiple indicators are flashing on the ⬙up⬙ button ...

  • Page 497

    • park mode – indicator lamp 3 will be illuminated when the vehicle is in park mode. If park mode is requested while vehicle speed is between 15 mph (24 km/h) and 25 mph (40 km/h), indicator lamp 4 will remain on solid and indicator lamp 3 will flash as the system waits for the vehicle to reduce spe...

  • Page 498

    Off-road driving tips note: prior to off-road driving, remove the front air dam to prevent damage. The front air dam is attached to the lower front fascia with seven quarter turn fasteners and can be removed by hand. Quadra-lift™ – if equipped when off-roading, it is recommended that the lowest usea...

  • Page 499

    Or terrain be selected. The vehicle height should then be raised as required by the changes in terrain. The selec-terrain™ switch will automatically change the vehicle to the optimized height based on the selec- terrain™ switch position. The vehicle height can be changed from the default height for ...

  • Page 500

    Note: your vehicle is capable of water fording in up to 20 inches (51 cm) of water, while crossing small rivers or streams. To maintain optimal performance of your vehi- cle’s heating and ventilation system it is recommended to switch the system into recirculation mode during water fording. Caution!...

  • Page 501

    Maintenance after driving through deep water, inspect your vehicle fluids and lubricants (engine oil, transmission oil, axle, transfer case) to assure the fluids have not been contami- nated. Contaminated fluid (milky, foamy in appearance) should be flushed/changed as soon as possible to pre- vent c...

  • Page 502

    Warning! If the engine stalls, you lose forward motion, or cannot make it to the top of a steep hill or grade, never attempt to turn around. To do so may result in tipping and rolling the vehicle. Always back care- fully straight down a hill in reverse gear. Never back down a hill in neutral using o...

  • Page 503

    • completely inspect the underbody of your vehicle. Check tires, body structure, steering, suspension, and exhaust system for damage. • inspect the radiator for mud and debris and clean as required. • check threaded fasteners for looseness, particularly on the chassis, drivetrain components, steerin...

  • Page 504

    And increased ease of maneuverability in tight spaces. The system will vary its assist to provide light efforts while parking and good feel while driving. If the electro- hydraulic power steering system experiences a fault that prevents it from providing power steering assist, then the system will p...

  • Page 505

    Note: • even if power steering assistance is no longer opera- tional, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. • if the condition persists, see your a...

  • Page 506

    Warning! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. Caution! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature an...

  • Page 507

    If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Fuel saver technology (if equipped) — 5.7l engine only this feature ...

  • Page 508

    When the parking brake is applied with the ignition switch in the on position, the “brake warning light” in the instrument cluster will illuminate. Note: • when the parking brake is applied and the transmis- sion is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, ...

  • Page 509

    Warning! (continued) • do not leave the key fob in or near the vehicle (or in a location accessible to children), and do not leave keyless enter-n-go™ in the acc or on/ run mode. A child could operate power windows, other controls, or move the vehicle. • be sure the parking brake is fully disengaged...

  • Page 510

    (bld), ready alert braking, rain brake support and, if it has four-wheel drive with the mp 3023 two-speed trans- fer case, hill descent control (hdc). Anti-lock brake system (abs) this system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraul...

  • Page 511

    On a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remains active even if esc system is in the “partial off” mode. Refer to “elec- tronic stability...

  • Page 512

    Speed of the vehicle. When erm determines that the rate of change of the steering wheel angle and vehicle’s speed are sufficient to potentially cause wheel lift, it then applies the appropriate brake and may also reduce engine power to lessen the chance that wheel lift will occur. Erm will only inte...

  • Page 513

    Path of the vehicle. When the actual path does not match the intended path, esc applies the brake of the appro- priate wheel to assist in counteracting the oversteer or understeer condition. • oversteer - when the vehicle is turning more than appropriate for the steering wheel position. • understeer...

  • Page 514

    High range (four-wheel drive models) or two-wheel drive models on this is the normal operating mode for esc in 4wd high range and in two-wheel drive vehicles. Whenever the vehicle is started or the transfer case (if equipped) is shifted from 4wd low range or neutral back to 4wd high range, the esc s...

  • Page 515

    Note: to improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand, or gravel, it may be desirable to switch to the “partial off” mode by pressing the “esc off” switch. Once the situation requiring esc to be switched to the “partial off” mode is overcome, turn ...

  • Page 516

    Warning! If tsc activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway. Hill start assist (hsa) the hsa system is designed to assist the driver when starting a vehicle from a stop on a hill. Hsa will maintain the level...

  • Page 517

    Warning! There may be situations on minor hills (i.E., less than 8%), with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur. This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking ...

  • Page 518

    Warning! (continued) • hsa is not a parking brake. If you stop the vehicle on a hill without putting the transmission in park and using the parking brake, it will roll down the hill and could cause a collision with another ve- hicle or object. Always remember to use the park- ing brake while parking...

  • Page 519

    Hill descent control (hdc) — four-wheel drive models with mp3023 two-speed transfer case only hdc maintains vehicle speed while descending hills during off-road driving situations and is available in 4wd low range only. To enable hdc, press the hdc switch or put the selec-terrain™ system in “rock” m...

  • Page 520

    The hdc speed may be adjusted by the driver to suit the driving conditions. The speed corresponds to the trans- mission gear selected. Hdc operation can be overridden with brake application to slow the vehicle down below the hdc control speed. Conversely, if more speed is desired during hdc control,...

  • Page 521

    Warning! Hdc is only intended to assist the driver in control- ling vehicle speed when descending hills. The driver must remain attentive to the driving conditions and is responsible for maintaining a safe vehicle speed. Esc activation/malfunction indicator light and esc off indicator light the “esc...

  • Page 522

    Note: • the “esc activation/malfunction indicator light” and the “esc off indicator light” come on momen- tarily each time the ignition switch is turned on. • each time the ignition is turned on, the esc system will be on even if it was turned off previously. • the esc system will make buzzing or cl...

  • Page 523

    Note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standards. Tires designed to this standard ha...

  • Page 524

    Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ....Blank....ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t or s = temporary spare tire 31 = overall diameter in inches (in) 215 ...

  • Page 525

    Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...

  • Page 526

    Example: load identification: ⴖ....Blank....ⴖ = absence of any text on the sidewall of the tire indicates a standard load (sl) tire extra load (xl) = extra load (or reinforced) tire light load (ll) = light load tire c, d, e, f, g = load range associated with the maximum load a tire can carry at a sp...

  • Page 527

    Example: dot ma l9 abcd 0301 dot = department of transportation — this symbol certifies that the tire is in compliance with the u.S. Department of transportation tire safety standards and is approved for highway use ma = code representing the tire manufacturing location (two digits) l9 = code repres...

  • Page 528

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or ...

  • Page 529

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Tire placard location 5 starting and operating 527.

  • Page 530

    Tire and loading information placard this placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. Loa...

  • Page 531

    Note: under a maximum loaded vehicle condition, gross axle weight ratings (gawrs) for the front and rear axles must not be exceeded. For further information on gawrs, vehicle loading, and trailer towing, refer to “vehicle loading” in this section. To determine the maximum loading conditions of your ...

  • Page 532

    5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult th...

  • Page 533

    5 starting and operating 531.

  • Page 534

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 535

    Warning! (continued) • unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear pat- terns...

  • Page 536

    Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.” cold tire infl...

  • Page 537

    Tire pressures for high speed operation the manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and ...

  • Page 538

    The tire sidewall. Use all season tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Summer or three season tires – if equipped summer tires provide traction in both wet and dry conditions, and are not intended to be driven in snow or on ice. S...

  • Page 539

    Spare tire matching original equipped tire and wheel – if equipped your vehicle may be equipped with a spare tire and wheel equivalent in look and function to the original equipment tire and wheel found on the front or rear axle of your vehicle. This spare tire may be used in the tire rotation for y...

  • Page 540

    Since this tire has limited tread life the original equip- ment tire should be repaired (or replaced) and reinstalled on your vehicle at the first opportunity. Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically fo...

  • Page 541

    Your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity. Warning! Limited-use spares are for emergency use only. In- stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than ...

  • Page 542

    Tread wear indicators tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is wo...

  • Page 543

    Warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place with...

  • Page 544

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 545

    • install on rear tires only • due to limited clearance, the security chain company (scc) super z6 low profile traction device or equiva- lent is recommended on p265/60r18 or 265/50r20 tires. Warning! Using tires of different size and type (m+s, snow) between front and rear axles can cause unpredict...

  • Page 546

    Caution! (continued) • observe the traction device manufacturer’s instruc- tions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer’s if it is less than 30 mph (48 km/h). • do not use traction devices on a com...

  • Page 547

    Tire pressure monitor system (tpms) the tire pressure monitoring system (tpms) will warn the driver of a low tire pressure based on the vehicle recommended cold tire placard pressure. The tire pressure will vary with temperature by about 1 psi (7 kpa) for every 12°f (6.5°c). This means that when the...

  • Page 548

    The tpms will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above recommended cold tire placard pressure. Once the low tire pressure warning has been illuminated, the tire pressure must be increased to the rec...

  • Page 549

    Caution! • the tpms has been optimized for the original equipment tires and wheels. Tpms pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or ...

  • Page 550

    • seasonal temperature changes will affect tire pressure, and the tpms will monitor the actual tire pressure in the tire. Base system the tire pressure monitor system (tpms) uses wireless technology with wheel rim-mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each w...

  • Page 551

    The tire pressure monitoring telltale light will flash on and off for 75 seconds, and remain on solid when a system fault is detected. In addition, a “service tpm system” message may be displayed for approximately 5 seconds when a system fault is detected, and a chime will sound. If the ignition swi...

  • Page 552

    Switch cycle, a chime will sound, a “service tpm sys- tem” message will be displayed for a minimum of five sec- onds, and the tire pressure monitoring telltale light will flash on and off for 75 seconds and then remain on solid. Once you repair or replace the original road tire, and reinstall it on ...

  • Page 553

    Tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illuminate in the instrument cluster, and an au- dible chime will be activated, when one or more of the four active road tire pressures are low. In addition, the evic will display a “low tire pressure” me...

  • Page 554

    Pressure value(s) will stop “flashing,” and the tire pres- sure monitoring telltale light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. Service tpm system warning the ti...

  • Page 555

    Message will not be present, and a pressure value will be displayed instead of dashes. A system fault can occur by any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the tpm sensors. 2. Installing some form of aftermarket w...

  • Page 556

    Tire pressure monitoring telltale light will flash on and off for 75 seconds and then remain on solid, and the evic will display a ⬙service tpm system⬙ message for five seconds and then display dashes (- -) in place of the pressure value. Once you repair or replace the original road tire, and reinst...

  • Page 557

    Fuel requirements 3.6l engine – if equipped this engine is designed to meet all emis- sions regulations and provide excellent fuel economy and performance when using high-quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended, as it will not...

  • Page 558

    Reformulated gasoline many areas of the country require the use of cleaner burning gasoline referred to as “reformulated gasoline.” reformulated gasolines contain oxygenates and are spe- cifically blended to reduce vehicle emissions and im- prove air quality. The manufacturer supports the use of ref...

  • Page 559

    If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • obd ii “malfunction indicator light” on • poor engine performance • poor cold start and cold drivability • increased risk for fuel system component corrosion to...

  • Page 560

    Materials added to fuel all gasoline sold in the united states is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the f...

  • Page 561

    Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such...

  • Page 562

    Flexible fuel (3.6l engine only) — if equipped e-85 general information the information in this section is for flexible fuel ve- hicles only. These vehicles can be identified by a unique fuel filler door label that states ethanol (e-85) or un- leaded gasoline only. This section only covers those sub...

  • Page 563

    Ethanol fuel (e-85) e-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. Warning! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap)...

  • Page 564

    When you do switch fuel types it is recommended that: • you do not add less than 5 gallons (19 liters) when refueling • you drive the vehicle immediately after refueling for at least 5 miles (8 km) observing these precautions will avoid possible hard starting and/or significant deterioration in driv...

  • Page 565

    Starting the characteristics of e-85 fuel make it unsuitable for use when ambient temperatures fall below 0°f (-18°c). In the range of 0°f (-18°c) to 32°f (0°c), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations...

  • Page 566

    Adding fuel fuel filler cap (gas cap) the gas cap is located behind the locking fuel filler door, on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. 1. Press the fuel filler door release switch (located under the headlamp...

  • Page 567

    Caution! • damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “malfunction indi- cator light (mil)” to illuminate, due to f...

  • Page 568

    Warning! • never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the malfunction indicator light to turn on. • a...

  • Page 569

    5. Pull the release cable. Loose fuel filler cap message if the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap indicator will display in the evic telltale display area. Refer to “electronic vehicle information center (evic)” i...

  • Page 570

    Gross vehicle weight rating (gvwr) the gvwr is the total permissible weight of your vehicle including driver, passengers, vehicle, options and cargo. The label also specifies maximum capacities of front and rear axle systems (gawr). Total load must be limited so gvwr and front and rear gawr are not ...

  • Page 571

    Curb weight the curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a comm...

  • Page 572

    Trailer towing in this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible. To maintain warranty coverage, follow t...

  • Page 573

    Warning! (continued) you use a standard weight-carrying hitch, you could lose control of your vehicle and cause a collision. Gross combination weight rating (gcwr) the gcwr is the total permissible weight of your vehicle and trailer when weighed in combination. Note: the gcwr rating includes a 150 l...

  • Page 574

    Trailer sway control the trailer sway control can be a mechanical telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable fric- tion associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveli...

  • Page 575

    Warning! • an improperly adjusted weight-distributing hitch system may reduce handling, stability, and braking performance, and could result in a collision. • weight-distributing hitch systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a re...

  • Page 576

    With weight-distributing hitch (correct) improper adjustment of weight-distributing hitch (incorrect) 574 starting and operating.

  • Page 577

    Trailer hitch classification the following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer hitch classification definitions clas...

  • Page 578

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine model frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l 4x2 40 sq ft (3.72 sq m) 5,000 lbs (2 268 kg) 500 ...

  • Page 579

    Note: the trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the tire and loading information placard. Refer to “tire safety information” in “starting and operating” for further information. The addition of...

  • Page 580

    • the weight of any other type of cargo or equipment put in or on your vehicle • the weight of the driver and all passengers. Note: remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be con...

  • Page 581

    Warning! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may ...

  • Page 582

    Warning! (continued) • total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. Gvwr 2. Gtw 3. Gawr 4. Trailer tongue weight rating for the trailer hitch utilized . Towing requirements – tires • do not attempt to tow a trailer...

  • Page 583

    Towing requirements – trailer brakes • do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. • an electronically actuated trailer brake controller is required when towing a trailer w...

  • Page 584

    Warning! (continued) • towing any trailer will increase your stopping distance. When towing you should allow for addi- tional space between your vehicle and the vehicle in front of you. Failure to do so could result in an accident. Towing requirements – trailer lights and wiring whenever you pull a ...

  • Page 585

    Four-pin connector 1 — female pins 4 — park 2 — male pin 5 — left stop/turn 3 — ground 6 — right stop/turn seven-pin connector 1 — battery 5 — ground 2 — backup lamps 6 — left stop/turn 3 — right stop/turn 7 — running lamps 4 — electric brakes 5 starting and operating 583.

  • Page 586

    Towing tips before setting out on a trip, practice turning, stopping and backing the trailer up in an area away from heavy traffic. Automatic transmission the drive range can be selected when towing. The transmission controls include an adaptive drive strategy to avoid frequent shifting when towing....

  • Page 587

    Cooling system to reduce potential for engine and transmission over- heating, take the following actions: city driving when stopped for short periods of time, shift the trans- mission into neutral and increase engine idle speed. Highway driving reduce speed. Air conditioning turn off temporarily. Sn...

  • Page 588

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheel off the ground two-wheel drive models four-wheel drive models flat tow none not allowed see instructions • transmission in park • transfer case in neutral (n) • tow in forward direction dol...

  • Page 589

    Note: vehicles equipped with quadra-lift™ must be lowered to the “park” (lowest) level, and have automatic leveling disabled, before tying them down (from the body) on a trailer or flatbed truck. Refer to “quadra- lift™ – if equipped” in “starting and operating” for more information. If the vehicle ...

  • Page 590

    Caution! Towing with the rear wheels on the ground will cause severe transmission damage. Damage from improper towing is not covered under the new vehicle limited warranty. Recreational towing – quadra-trac i 姞 (single-speed transfer case) four-wheel drive models recreational towing is not allowed. ...

  • Page 591

    Caution! • front or rear wheel lifts must not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. • tow only in a forward direction. Towing this ve- hicle backwards can cause severe damage to the transfer case. • th...

  • Page 592

    Warning! (continued) position disengages both the front and rear drive- shafts from the powertrain and will allow the vehicle to move, even if the transmission is in park. The parking brake should always be applied when the driver is not in the vehicle. Use the following procedure to prepare your ve...

  • Page 593

    7. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case neutral (n) button (located by the selector switch) for four seconds. The light behind the n symbol will blink, indicating shift in progress. The light will stop blinking (stay on solid) when the shift...

  • Page 594

    11. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 12. Turn the engine off, then turn the ignition switch back to the on/run position without starting the engine. 13. Firmly apply the parking brake. 14. Shift the transmission into park. Caution! Damage to the ...

  • Page 595

    • a flashing neutral (n) position indicator light indicates that shift requirements have not been met. Shifting out of neutral (n) use the following procedure to prepare your vehicle for normal usage. 1. Bring the vehicle to a complete stop, leaving it con- nected to the tow vehicle. 2. Firmly apply...

  • Page 596

    Note: when shifting out of transfer case neu- tral (n), turning the engine off may be required to avoid gear clash. 9. After the neutral (n) indicator light turns off, release the neutral (n) button. 10. After the neutral (n) button has been released, the transfer case will shift to the position ind...

  • Page 597

    Note: • steps 1 through 7 are requirements that must be met prior to pressing the neutral (n) button, and must continue to be met until the shift has been completed. If any of these requirements are not met prior to pressing the neutral (n) button or are no longer met during the shift, the neutral (...

  • Page 599: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . .598 䡵 if your engine overheats . . . . . . . . . . . .598 䡵 jacking and tire changing . . . . . . . . . .599 ▫ jack location . . . . . . . . . . . . . . . . . . . . . . . .600 ▫ spare tire stowage . . . . . . . . . . ....

  • Page 600

    Hazard warning flashers the hazard warning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the hazard warning flasher. When the switch is activated, all direc- tional turn signals will flash on and off to warn oncoming traffic of an emergency...

  • Page 601

    Caution! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads hot (h), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on hot (h), and you hear conti...

  • Page 602

    Warning! (continued) • the jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack location the scissor-type jack and tire changin...

  • Page 603

    Preparations for jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery surfaces. Warning! Do not attempt to change a tire on the side of the vehicle closest to moving traffic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel. 2. Turn...

  • Page 604

    Jacking instructions warning! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • turn on the hazard warning flasher. • block the ...

  • Page 605

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, while the whee...

  • Page 606

    Caution! Do not attempt to raise vehicle by jacking on loca- tions other than those indicated in the jacking in- structions for this vehicle. 4. For the front axle, place the jack on the body flange just behind the front tire as indicated by the triangular lift point symbol on the sill molding. Do n...

  • Page 607

    5. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the rear tire (as indicated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is fully engaged. Front jacking location lift point symbol on sill m...

  • Page 608

    6. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability. Warning! Raising the vehicle higher than necessary can make the vehicle le...

  • Page 609

    Caution! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow ...

  • Page 610

    11. Lower the jack to the fully closed position and return it and the tools to the proper positions in the foam tray. 12. Remove the small center cap and securely store the road wheel in the cargo area. 13. Have the aluminum road wheel and tire repaired as soon as possible, properly secure the spare...

  • Page 611

    2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in per...

  • Page 612

    Caution! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 volts or damage to the battery, starter motor, alternator or electrical system may occur. Warning! Do not attempt jump-starting if the battery is frozen. It could rupture or explode ...

  • Page 613

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be s...

  • Page 614

    Jump-starting procedure warning! Failure to follow this procedure could result in per- sonal injury or property damage due to battery ex- plosion. Caution! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect th...

  • Page 615

    Once the engine is started, remove the jumper cables in the reverse sequence: 6. Disconnect the negative (-) jumper cable from the remote negative (-) post of the discharged vehicle. 7. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery. 8. Disconne...

  • Page 616

    Note: press the ⬙esc off⬙ switch, to place the electronic stability control (esc) system in ⬙partial off⬙ mode, before rocking the vehicle. Refer to “electronic brake control” in “starting and operating” for further infor- mation. Once the vehicle has been freed, press the ⬙esc off ⬙ switch again to...

  • Page 617

    Warning! (continued) explode and injure someone. Do not spin your vehi- cle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- ping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed. Emergency tow hooks — if equipped ...

  • Page 618

    Shift lever override if a malfunction occurs and the shift lever cannot be moved out of the park position, you can use the following procedure to temporarily move the shift lever: 1. Turn the engine off. 2. Firmly apply the parking brake. 3. Remove the rubber liner from the cupholder (located next t...

  • Page 619

    5. Press and maintain firm pressure on the brake pedal. 6. Insert the screwdriver or similar tool into the access hole, and push and hold the override release lever down. 7. Move the shift lever to the neutral position. 8. The vehicle may then be started in neutral. 9. Reinstall the shift lever over...

  • Page 620

    Towing condition wheels off the ground 2wd models 4wd models flat tow none if transmission is operable: • transmission in neutral • 30 mph (48 km/h) max speed • 15 miles (24 km) max distance see instructions in “recreational towing” under “starting and operating” • transmission in park • transfer ca...

  • Page 621

    If you must use the accessories (wipers, defrosters, etc.) while being towed, the ignition must be in the on/run position, not the acc position. If the vehicle’s battery is discharged, refer to “shift lever override” in “what to do in emergencies” for instruc- tions on shifting the automatic transmi...

  • Page 622

    • the towing distance must not exceed 15 miles (24 km) for 6-speed transmission, or 30 miles (48 km) for 8-speed transmission. If the transmission is not operable, or the vehicle must be towed faster than 30 mph (48 km/h) or farther than 15 miles (24 km), for 6-speed transmission, or 30 miles (48 km...

  • Page 623

    If flatbed equipment is not available, and the transfer case is operable, vehicles with a two-speed transfer case may be towed (in the forward direction, with all wheels on the ground), if the transfer case is in neutral and the transmission is in park. Refer to “recreational towing” in “starting an...

  • Page 625: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 3.6l . . . . . . . . . .625 䡵 engine compartment — 5.7l . . . . . . . . . .626 䡵 onboard diagnostic system (obd ii) . . .627 ▫ loose fuel filler cap message . . . . . . . . . . . .627 䡵 emissions inspection and maintenance programs . . . . . ....

  • Page 626

    ▫ front/rear axle fluid . . . . . . . . . . . . . . . . . .652 ▫ transfer case . . . . . . . . . . . . . . . . . . . . . . . .653 ▫ automatic transmission . . . . . . . . . . . . . . . .654 ▫ appearance care and protection from corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .658 䡵 fus...

  • Page 627

    Engine compartment — 3.6l 1 — totally integrated power module (fuses) 6 — air cleaner filter 2 — engine oil dipstick 7 — washer fluid reservoir 3 — engine oil fill 8 — coolant pressure cap (radiator) 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — power steering fluid reservoir 7 maintain...

  • Page 628

    Engine compartment — 5.7l 1 — totally integrated power module (fuses) 6 — washer fluid reservoir 2 — automatic transmission dipstick 7 — engine oil dipstick 3 — engine oil fill 8 — coolant pressure cap (radiator) 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — air cleaner filter 626 maint...

  • Page 629

    Onboard diagnostic system (obd ii) your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 630

    Refer to “electronic vehicle information center (evic) in “understanding your instrument panel” for further in- formation. Tighten the fuel filler cap properly and press the select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started....

  • Page 631

    4. Approximately 15 seconds later, one of two things will happen: • the mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m ...

  • Page 632

    Available which include detailed service information for your vehicle. Refer to these service manuals before attempting any procedure yourself. Note: intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. Warning! Y...

  • Page 633

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance inter- vals. Do not use chemical flushes in these compo- nents as the chemicals can damage your engine, transmission, power steering...

  • Page 634

    Change engine oil the oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “maintenance schedule” for further informa- tion. Note:under no circumstances should oil change inter- vals exceed 10,000 miles (16,000 km) or twelve mont...

  • Page 635

    Engine oil viscosity – 3.6l engine sae 5w-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil ...

  • Page 636

    The engine oil. Engine oil is an engineered product and its performance may be impaired by supplemental addi- tives. Disposing of used engine oil and oil filters care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discard...

  • Page 637

    Engine air cleaner filter selection the quality of replacement engine air cleaner filters varies considerably. Only high quality filters should be used to assure most efficient service. Mopar 威 engine air cleaner filters are a high quality filter and are recom- mended. Maintenance-free battery your ...

  • Page 638

    Caution! • it is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be ...

  • Page 639

    Warning! • use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Re...

  • Page 640

    A/c air filter refer to the “maintenance schedule” for the proper maintenance intervals. Warning! Do not remove the a/c air filter while the blower is operating or personal injury may result. The a/c air filter is located in the fresh air inlet behind the glove box. Perform the following procedure t...

  • Page 641

    6. Install the a/c air filter with the arrow on the filter pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover. Caution! The a/c air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly i...

  • Page 642

    Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact...

  • Page 643

    3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade an...

  • Page 644

    Clean the wiper blades, this will help blade performance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. Warning! Co...

  • Page 645

    Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, refer to “safety tips/exhaust gas” in “things to know before starting your vehicle” for further...

  • Page 646

    Under normal operating conditions, the catalytic converter will not require maintenance. However, it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. Note: intentional tampering with emissions control systems can result in civil...

  • Page 647

    Engine coolant checks check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh engine coolant (anti- fre...

  • Page 648

    Selection of coolant refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Caution! • mixing of engine coolant (antifreeze) other than specified organic additive technology (oat) en- gine coolant (antifreeze), may result in engine damage and may decr...

  • Page 649

    Please review these recommendations for using organic additive technology (oat) engine coolant (antifreeze). When adding engine coolant (antifreeze): • we recommend using mopar威 antifreeze/coolant 10 year/150,000 mile formula oat (organic additive technology). • mix a minimum solution of 50% oat eng...

  • Page 650

    Warning! • the warning words “do not open hot” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To pre...

  • Page 651

    When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to remember note: when the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine co...

  • Page 652

    • do not change the thermostat for summer or winter operation. If replacement is ever necessary, install only the correct type thermostat. Other designs may result in unsatisfactory engine coolant (antifreeze) performance, poor gas mileage, and increased emissions. Brake system in order to assure br...

  • Page 653

    With disc brakes, the fluid level can be expected to fall as the brake linings wear. However, an unexpected drop in fluid level may be caused by a leak and a system check should be conducted. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Warn...

  • Page 654

    Warning! (continued) • do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Front/rear axle fluid for normal service, periodic fluid level checks are not required. When ...

  • Page 655

    Caution! Do not over tighten the plugs as it could damage then and cause them to leak. Selection of lubricant use only the manufacturer’s recommended fluid. Refer to “fluids, lubricants, and genuine parts” in “maintain- ing your vehicle” for further information. Transfer case fluid level check for n...

  • Page 656

    Automatic transmission selection of lubricant it is important to use the proper transmission fluid to ensure optimum transmission performance and life. Use only the manufacturer’s recommended transmission fluid. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for fluid...

  • Page 657

    Caution! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the new vehicle limited warranty. Fluid level check – 3.6l engine the fluid level is preset at the factory and does not require adjustment under normal ...

  • Page 658

    Fluid level check – 5.7l engine it is best to check the fluid level when the transmission is at normal operating temperature (approximately 180°f / 82°c). This occurs after at least 15 miles (25 km) of driving. At normal operating temperature the fluid can- not be held comfortably between the finger...

  • Page 659

    Note: if it is necessary to check the transmission below the operating temperature, the fluid level should be between the two “cold” (lower) holes on the dipstick with the fluid at approximately 70°f (21°c) (room tem- perature). If the fluid level is correctly established at room temperature, it sho...

  • Page 660

    Appearance care and protection from corrosion protection of body and paint from corrosion vehicle body care requirements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and chemicals that are sprayed on trees and road surfaces during other seas...

  • Page 661

    • if insects, tar, or other similar deposits have accumu- lated on your vehicle, use mopar 威 super kleen bug and tar remover to remove. • use a high quality cleaner wax, such as mopar威 cleaner wax to remove road film, stains and to protect your paint finish. Take care never to scratch the paint. • a...

  • Page 662

    • if you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • if a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • use mopar威 touch up paint on scratches as soon as possible. You...

  • Page 663

    • for tough stains, apply mopar威 total clean, or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • for grease stains, apply mopar威 multi-purpose cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap resid...

  • Page 664

    Cleaning headlights your vehicle is equipped with plastic headlights and fog lights (if equipped) that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed. To minimize...

  • Page 665

    Cleaning plastic instrument cluster lenses the lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol con...

  • Page 666

    Fuses totally integrated power module the totally integrated power module is located in the engine compartment. This center contains cartridge fuses and mini fuses. A description of each fuse and compo- nent may be stamped on the inside cover, otherwise the cavity number of each fuse is stamped on t...

  • Page 667

    Cavity car- tridge fuse mini fuse description j02 30 amp pink power liftgate module j03 30 amp pink trailer tow j04 25 amp natural driver door node j05 25 amp natural passenger door node j06 40 amp green antilock brakes pump/stability control system j07 30 amp pink antilock brakes valve/stability co...

  • Page 668

    Cavity car- tridge fuse mini fuse description j15 40 amp green front cabin fan/ blower j17 40 amp green starter motor sole- noid j18 20 amp blue powertrain control module/powertrain control module transmission range j19 60 amp yellow radiator fan motor hi/radiator fan motor low j20 30 amp pink front...

  • Page 669

    Cavity car- tridge fuse mini fuse description m6 20 amp yellow cigar lighter m7 20 amp yellow power outlet #2 (switchable) m8 20 amp yellow front heated seat & steering wheel m9 20 amp yellow rear heated seats m10 15 amp blue video/universal garage door opener cavity car- tridge fuse mini fuse descr...

  • Page 670

    Cavity car- tridge fuse mini fuse description m15 20 amp yellow power seat module(s)/ adaptive cruise control/audio telematics/ daytime running lights relay/air suspension module/instrument cluster m16 10 amp red occupant restraint controller m18 15 amp blue stop lamp cavity car- tridge fuse mini fu...

  • Page 671

    Cavity car- tridge fuse mini fuse description m25 20 amp yellow fuel pump motor output/diesel lift pump (export only) m26 10 amp red driver door switch bank m27 10 amp red ignition switch/ wireless control module/keyless entry module m28 15 amp blue powertrain controller/ transmission controller cav...

  • Page 672

    Cavity car- tridge fuse mini fuse description m34 10 amp red park assist module/climate control system module/infra red sensor/compass module m35 15 amp blue left rear parklamps m36 20 amp yellow power outlet m37 10 amp red antilock brakes/ stability control system module m38 25 amp natural all door...

  • Page 673

    Vehicle storage if you are leaving your vehicle dormant for more than 21 days you may want to take steps to protect your battery. You may: • remove fuse #j13 in the totally integrated power module (tipm) labeled main ignition-off draw (iod). • or, disconnect the negative cable from the battery. • an...

  • Page 674

    Exterior bulbs bulb number headlamps (low beam) h11 headlamps (high beam) 9005 headlamps (low beam) – high intensity discharge (hid) d1s (serviced at authorized dealer) daytime running lamp (drl) 3157k front fog lamps psx24w front side marker 194 front park/turn lamp 7444na aux aperature backup lamp...

  • Page 675

    Warning! A transient high voltage occurs at the bulb sockets of high intensity discharge (hid) headlamps when the headlamp switch is turned on. It may cause serious electrical shock or electrocution if not serviced prop- erly. See your authorized dealer for service. Note: on vehicles equipped with h...

  • Page 676

    Caution! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front fog lamps 1. Reach through the cutout in the splash shield and disconnect the wiring harness from th...

  • Page 677

    6. Firmly and evenly push the bulb straight into the lamp housing until both tabs snap firmly into place and are fully engaged. 7. Connect the wiring harness to the front fog lamp connector. Rear tail, stop, turn signal, and backup lamps 1. Raise the liftgate. 2. Remove the two push-pins from the ta...

  • Page 678

    Rear liftgate mounted tail lamp 1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Once lower trim is loose, close the liftgate. 4. Open the flipper glass. 5. Pull up glass seal at bottom of window opening. 6. Remove small trim panel ar...

  • Page 679

    Center high-mounted stop lamp (chmsl) the center high-mounted stop lamp is an led assembly. See your authorized dealer for replacement. Rear license lamp 1. Use a screw driver to gently pry against the side of the snap tab to remove the license lamp lens. 2. Pull bulb from socket. 3. Replace bulb. 4...

  • Page 680

    Fluid capacities u.S. Metric fuel (approximate) 3.6l and 5.7l engines 25 gallons 94 liters engine oil with filter 3.6l engine (sae 5w-20, api certified) 6 quarts 5.6 liters 5.7l engine (sae 5w-20, api certified) 7 quarts 6.6 liters cooling system* 3.6l engine (mopar 威 antifreeze/engine coolant 10 ye...

  • Page 681

    Fluids, lubricants and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 10 year/150,000 mile formula oat (organic additive technology) or equivalent meeting the requirements of chrysler material standard ms-12106. Engine oil – 3.6l engine use...

  • Page 682

    Chassis component fluid, lubricant, or genuine part automatic transmission mopar 威 atf+4威 automatic transmission fluid or equivalent licensed atf+4 威 product. Transfer case – single-speed (quadra-trac i 威) shell automatic transmission fluid 3353 or equivalent. Transfer case – two-speed (quadra-trac ...

  • Page 683

    Component fluid, lubricant, or genuine part brake master cylinder mopar 威 dot 3 brake fluid, sae j1703 should be used. If dot 3, sae j1703 brake fluid is not available, then dot 4 is acceptable. Use only recommended brake fluids or equivalent. Power steering reservoir – 3.6l engine mopar 威 hydraulic...

  • Page 685: Maintenance Schedules

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . .684 ▫ maintenance chart. . . . . . . . . . . . . . . . . . . . .686 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 686

    Maintenance schedule your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This...

  • Page 687

    Required maintenance refer to the maintenance schedules on the following pages for required maintenance. At every oil change interval as indicated by oil change indicator system: • change oil and filter. • rotate the tires. Rotate at the first sign of irregu- lar wear, even if it occurs before the o...

  • Page 688

    Maintenance chart mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176...

  • Page 689

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 690

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 691

    Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. • failure to properly inspect and m...

  • Page 693: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle . . . . . . . . . . . . . . . . . . . . . . .693 ▫ prepare for the appointment. . . . . . . . . . . . .693 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . . .693 ▫ be reasonable with requests ....

  • Page 694

    䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . .699 ▫ treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .699 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . . .700 ▫ temperature grades. . . . . . . . . . . . . . . . . . . .700 692 if...

  • Page 695

    Suggestions for obtaining service for your vehicle prepare for the appointment if you are having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager....

  • Page 696

    Facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner. This is why you should always talk to an authorized dealer service manager first. Most matters can be re- solved with this process. • if for some reason...

  • Page 697

    In mexico contact: av. Prolongacion paseo de la reforma, 1240 sante fe c.P. 05109 mexico, d. F. In mexico city: 5081-7568 outside mexico city: 1-800-505-1300 customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has insta...

  • Page 698

    The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a ser- vice contract that is not a manufacturer’s service contract, and you req...

  • Page 699

    Mopar 姞 parts mopar 威 fluids, lubricants, parts, and accessories are available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle operating at its best. Reporting safety defects in the 50 united states and washington, d.C. If you believe that your ve...

  • Page 700

    Publication order forms to order the following manuals, you may use either the website or the phone numbers listed below. Visa, mas- tercard, american express, and discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. Note: a street address is required wh...

  • Page 701

    Call toll free at: • 1–800–890–4038 (u.S.) • 1–800–387–1143 (canada) or visit us on the worldwide web at: • www.Techauthority.Com department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The...

  • Page 702

    Traction grades the traction grades, from highest to lowest, are aa, a, b, and c. These grades represent the tire’s ability to stop on wet pavement, as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked c may have poor traction performan...

  • Page 703: Index

    Index 10

  • Page 704

    Adaptive cruise control (acc) (cruise control) . . .227 adding engine coolant (antifreeze) . . . . . . . . . . . .646 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .564 additives, fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .558 airbag. . . . . . . . . . . . . . . ...

  • Page 705

    Fluid and filter changes . . . . . . . . . . . . . . . . .657 fluid change . . . . . . . . . . . . . . . . . . . . . . . . .657 fluid level check . . . . . . . . . . . . . . . . . . . . . .654 fluid type . . . . . . . . . . . . . . . . . . . . . . . . . . .654 special additives . . . . . . . . . . ....

  • Page 706

    Carbon monoxide warning . . . . . . . . . . . . . . . . . .115 cargo area cover . . . . . . . . . . . . . . . . . . . . . . . . .301 cargo area features . . . . . . . . . . . . . . . . . . . . . . .298 cargo compartment . . . . . . . . . . . . . . . . . . . . . . .298 light . . . . . . . . . . . . ....

  • Page 707

    Coolant pressure cap (radiator cap) . . . . . . . . . . .647 cooling system. . . . . . . . . . . . . . . . . . . . . . . . . . .644 adding coolant (antifreeze) . . . . . . . . . . . . . . .646 coolant capacity . . . . . . . . . . . . . . . . . . . . . . .678 coolant level . . . . . . . . . . . . . ....

  • Page 708

    Electrical outlet, auxiliary (power outlet) . . . . . . . .287 electric rear window defrost. . . . . . . . . . . . . . . . .305 electric remote mirrors . . . . . . . . . . . . . . . . . . . . .129 electronic brake control system . . . . . . . . . . . . . . .507 brake assist system . . . . . . . . . ...

  • Page 709

    Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .556 event data recorder . . . . . . . . . . . . . . . . . . . . . . . .86 exhaust gas caution. . . . . . . . . . . . . . . . . . . . . . . .52 exhaust system. . . . . . . . . . . . . . . . . . . . . . . . . . .115 exterior lights...

  • Page 710

    Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .482 four wheel drive operation . . . . . . . . . . . . . . . . .482 freeing a stuck vehicle . . . . . . . . . . . . . . . . . . . . .613 front axle (differential). . . . . . . . . . . . . . . . . . . . .652 fuel . . . . . . . . . . . ....

  • Page 711

    Gear ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . .463 gear select lever override . . . . . . . . . . . . . . . . . .616 general information . . . . . . . . . . . . . . . . . . . . . . . .20 glass cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . .662 gross axle weight r...

  • Page 712

    Instrument panel lens cleaning . . . . . . . . . . . . . . .663 integrated power module (fuses) . . . . . . . . . . . . . .664 interior appearance care . . . . . . . . . . . . . . . . . . . .661 intermittent wipers (delay wipers). . . . . . . . . . . . .216 introduction . . . . . . . . . . . . . . ....

  • Page 713

    Bulb replacement . . . . . . . . . . . . . . . . . . . . . .672 cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299 center mounted stop . . . . . . . . . . . . . . . . . . . .677 daytime running . . . . . . . . . . . . . . . . . . . . . .206 dimmer switch, headlight . . . . . . . ...

  • Page 714

    Power door . . . . . . . . . . . . . . . . . . . . . . . . . . .35 lubrication, body . . . . . . . . . . . . . . . . . . . . . . . . .639 maintenance free battery. . . . . . . . . . . . . . . . . . . .635 maintenance procedures . . . . . . . . . . . . . . . . . . . .630 maintenance schedule . . . . ...

  • Page 715

    Off-road driving (off-pavement) . . . . . . . . . . . . . .496 oil change indicator . . . . . . . . . . . . . . . . . . . . . . .340 oil change indicator, reset . . . . . . . . . . . . . . . . . .340 oil, engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .631 capacity . . . . . . . . ...

  • Page 716

    Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292 lift gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129 outlet (auxiliary electrical outlet) . . . . . . . . . .287 seats . . . . . . . . . ....

  • Page 717

    Refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .637 reminder, seat belt. . . . . . . . . . . . . . . . . . . . . . . . .69 remote control starting system . . . . . . . . . . . . . . . . . . . . . . . . .30 remote keyless entry (rke) . . . . . . . . . . . . . . . . . .24 remote...

  • Page 718

    Untwisting procedure . . . . . . . . . . . . . . . . . . . .61 seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177 adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . .182 easy entry . . . . . . . . . . . . . . . . . . . . . . . . . . .200 memory . . . . . . . . ....

  • Page 719

    Starting and operating . . . . . . . . . . . . . . . . . . . . .453 starting procedures . . . . . . . . . . . . . . . . . . . . . . . .453 steering power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .501 tilt column . . . . . . . . . . . . . . . . . . . . . . . . . . .220 wheel, heate...

  • Page 720

    Load capacity . . . . . . . . . . . . . . . . . . . . . . . . .527 pressure monitor system (tpms) . . . . . . . . . . .545 pressure warning light . . . . . . . . . . . . . . . . . .318 quality grading . . . . . . . . . . . . . . . . . . . . . . .699 radial . . . . . . . . . . . . . . . . . . . . . ....

  • Page 721

    Transmission automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . .462 maintenance . . . . . . . . . . . . . . . . . . . . . . . . . .654 shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .460 transmitter battery service (remote keyless entry) . .27 transmitter, garage do...

  • Page 722

    Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 windshield defroster. . . . . . . . . . . . . . . . . . . . . . .116 windshield washers . . . . . . . . . . . . . . . . . . . . . . .214 fluid . . . . . . ....

  • Page 723

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be obser...

  • Page 724

    Patriot 2 0 1 3.