1. DL manuals
  2. Jeep
  3. Automobile
  4. 2015 Wrangler
  5. Owner's Manual

Jeep 2015 Wrangler Owner's Manual

Other manuals for 2015 Wrangler: Operating Information Manual, User Manual

Summary of 2015 Wrangler

  • Page 1

    Chrysler group llc o w n e r ’ s m a n u a l 2015 w rangler 15jk72-126-aa first edition printed in u.S.A. 2 0 1 5 wrangler includes wrangler unlimited.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3 understanding the featu...

  • Page 5: Introduction

    Introduction contents ! Introduction . . . . . . . . . . . . . . . . . . . . . . . .4 ! Rollover warning . . . . . . . . . . . . . . . . . . . .5 ! How to use this manual . . . . . . . . . . . . . .6 ! Warnings and cautions . . . . . . . . . . . . . .8 ! Vehicle identification number . . . . . . . ....

  • Page 6

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle. It can go places and perform tasks t...

  • Page 7

    This owner’s manual has been prepared with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by warranty information, and various customer-oriented documents. Please take the time to read these publications ...

  • Page 8

    Failure to use the driver and passenger seat belts pro- vided is a major cause of severe or fatal injury. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up. How to use this manual consult the table of contents to determine...

  • Page 9

    1 introduction 7.

  • Page 10

    Warnings and cautions this owners manual contains warnings against op- erating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire owners manual, you may miss importan...

  • Page 11

    Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. 1 introduction 9.

  • Page 13: Contents

    Things to know before starting your vehicle contents ! A word about your keys . . . . . . . . . . . . .14 ▫ ignition key removal . . . . . . . . . . . . . . . . . . .14 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . .16 ! Sentry key® . . . . . . . . . . . . . . . . . . . . . . . . .16 ▫ re...

  • Page 14

    ▫ programming additional transmitters. . . . . . . .27 ▫ transmitter battery replacement . . . . . . . . . . .27 ▫ general information . . . . . . . . . . . . . . . . . . . .28 ! Remote starting system — if equipped . .29 ▫ how to use remote start . . . . . . . . . . . . . . . .29 ▫ remote start abo...

  • Page 15

    ! Rear swing gate . . . . . . . . . . . . . . . . . . . . .47 ! Occupant restraint systems . . . . . . . . . .48 ▫ important safety precautions . . . . . . . . . . . . . .48 ▫ seat belt systems . . . . . . . . . . . . . . . . . . . . . .50 ▫ supplemental restraint system (srs) . . . . . . . .63 ▫ ch...

  • Page 16

    A word about your keys the authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition key removal 1. Place the shift lever in...

  • Page 17

    Warning! • before exiting a vehicle, always apply the parking brake, shift the transmission into park, and re- move the key fob from the ignition. When leaving the vehicle, always lock your vehicle. • never leave children alone in a vehicle, or with access to an unlocked vehicle. • allowing children...

  • Page 18

    Warning! (continued) • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. Caution! An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors when leaving the vehicle unattended. K...

  • Page 19

    During normal operation, after turning on the ignition switch, the vehicle security light will turn on for three seconds for a bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the vehicle security light begins to fla...

  • Page 20

    Caution! Always remove the sentry keys® from the vehicle and lock all doors when leaving the vehicle unat- tended. At the time of purchase, the original owner is provided with a four-digit personal identification number (pin). Keep the pin in a secure location. This number is required for authorized...

  • Page 21

    4. Insert a blank sentry key® into the ignition switch. Turn the ignition switch to the on/run position within 60 seconds. After 10 seconds, a single chime will sound. In addition, the vehicle security light will stop flashing. To indicate that programming is com- plete, the vehicle security light w...

  • Page 22

    Note: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Vehicle security alarm — if equipped the vehicle security alarm monitors the vehicle doors, swing gate, and ignition for unauthorized operation. Whi...

  • Page 23

    The instrument cluster) will flash rapidly for about 16 seconds to signal that the vehicle security alarm is arming. During this 16-second arming period, opening any door or the swing gate will cancel the arming. If the vehicle security alarm is successfully set, the vehicle security light will flas...

  • Page 24

    Illuminated entry — if equipped the courtesy lights will turn on when you use the remote keyless entry (rke) transmitter to unlock the doors or open any door. This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “mirrors” in “understanding the features of y...

  • Page 25

    Note: the line of transmission must not be blocked with metal objects. Three button rke transmitter four button rke transmitter 2 things to know before starting your vehicle 23.

  • Page 26

    To unlock the doors and swing gate push and release the rke transmitter unlock button once to unlock the driver’s door only, or twice to unlock all the doors and swing gate. When the rke transmitter unlock button is pushed, the illuminated entry will initiate and the turn signal lights will flash tw...

  • Page 27

    Note: pushing the rke transmitter lock button while you are inside of the vehicle will activate the vehicle security alarm. Opening a door with the vehicle security alarm activated will cause the alarm to sound. Push the rke transmitter unlock button to deactivate the ve- hicle security alarm. 5. If...

  • Page 28

    • for vehicles not equipped with the evic, perform the following steps: 1. Push the rke transmitter lock button for 4 to 10 seconds. 2. While the lock button is pushed (after four seconds), push the rke transmitter panic button. Release both buttons. The “sound horn on lock” feature can be reactivat...

  • Page 29

    • for vehicles not equipped with the evic, perform the following steps: 1. Push the rke transmitter unlock button for 4 to 10 seconds. 2. While the unlock button is pushed, (after four seconds) push the rke transmitter lock button. Release both buttons. 3. Test the “flash lights with lock” feature o...

  • Page 30

    2. Remove and replace the battery. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 3. To reassemble the rke transmitter case, snap the two halves together. General information this device complies wit...

  • Page 31

    2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, and some mobile or cb radios. Remote starting system — if equipped this system uses the remote keyless entry (rke) transmitter to start the engine conve- niently from outside the vehicle while still maintaining s...

  • Page 32

    Warning! • do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon mon- oxide (co) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious in- jury or death when inhaled. • keep remote keyless entry (rke) transmitters away from child...

  • Page 33

    To enter remote start push and release the remote start button on the rke transmitter twice within five sec- onds. The vehicle doors will lock, the parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the remote start mod...

  • Page 34

    To exit remote start mode without driving the vehicle push and release the remote start button one time or allow the engine to run for the entire 15-minute cycle. Note: to avoid unintentional shut downs, the system will disable the one time push of the remote start button for two seconds after recei...

  • Page 35

    Upper half door window removal — if equipped grasp the half door window and pull upward. Upper half door window installation — if equipped 1. Grasp the half door window and line up the pins with the pockets in the lower door. 2. Push down to ensure the half door window is fully seated. Front door re...

  • Page 36

    1. Roll down the glass window to prevent any damage. 2. Remove the hinge pin screws from the upper and lower outside hinges (using a #t50 torx® head driver). Note: the hinge pin screws and nuts can be stowed in the rear cargo tray located under the rear loadfloor. 3. Unplug the wiring harness connec...

  • Page 37

    4. Unhook the door strap from the body hook. Be careful not to allow the door to swing fully open as the mirror may damage the paint. 5. With the door open, lift the door to clear the hinge pins from their hinges and remove the door. Note: doors are heavy; use caution when removing them. To reinstal...

  • Page 38

    1. Roll down the glass window to prevent any damage. 2. Remove the hinge pin screws from the upper and lower outside hinges (using a #t50 torx® head driver). Note: the hinge pin screws and nuts can be stowed in the rear cargo tray located under the rear loadfloor. 3. Slide the front seat(s) fully fo...

  • Page 39

    5. Unplug the wiring harness connector. Note: squeeze the tab on the base of the connector. This will unlock the connector tab, allowing the harness to be disconnected. Trim access door connector latched 2 things to know before starting your vehicle 37.

  • Page 40

    6. Unhook the door strap from the body hook. 7. With the door open, lift the door to clear the hinge pins from their hinges and remove the door. Note: doors are heavy; use caution when removing them. To reinstall the door(s), perform the previous steps in the opposite order. Door locks manual door l...

  • Page 41

    Note: the ignition key that is used to start the vehicle is used to lock or unlock the doors, swing gate, glove compartment, and console storage. Manual door lock (full frame doors) manual door lock (half doors) 2 things to know before starting your vehicle 39.

  • Page 42

    Warning! • for personal security reasons and safety in a colli- sion, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or wi...

  • Page 43

    Warning! • for personal security reasons and safety in a colli- sion, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or wi...

  • Page 44

    Automatic unlock doors on exit programming the “automatic unlock doors on exit” feature can be enabled or disabled as follows: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between lock and on/ run and then back to lock four times ending up in the lock position. ...

  • Page 45

    Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child-protection locks are engaged. Note: for emergency exit with the system engaged, move the rocker lever rearward (unlocked position), roll down the window and ope...

  • Page 46

    The top left switch controls the left front window and the top right switch controls the right front window. Note: • for vehicles not equipped with the electronic vehicle information center (evic), the power window switches will remain active for 45 seconds after the ignition switch is turned to the...

  • Page 47

    Four-door models the lower left switch controls the left rear passenger window, and the lower right switch controls the right rear passenger window. Auto-down both the driver and front passenger window switches have an “auto-down” feature. Push the window switch past the first detent, release, and t...

  • Page 48

    Rear power windows — four-door models the rear passenger window switches are located on the back of the center floor console. Push the switch down- ward to open the window and upward to close the window. Window lockout switch rear power window switches (four-door models) 46 things to know before sta...

  • Page 49

    Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down in certain open or partially open posi- tions. This is a normal occurrence and can be minimized by adjusting ...

  • Page 50

    Caution! Do not press on rear wiper blade when closing the rear flip-up window, as damage to the blade will result. Warning! Driving with the flip-up window open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the flip-up window clos...

  • Page 51

    3. Children that are not big enough to wear the vehicle seat belt properly (refer to # child restraints # ) should be secured in a vehicle with a rear seat in child restraints or belt-positioning booster seats. Older chil- dren who do not use child restraints or belt- positioning booster seats shoul...

  • Page 52

    Seat belt systems buckle up even though you are an excellent driver, even on short trips. Someone on the road may be a poor driver and could cause a collision that includes you. This can happen far away from home or on your own street. Research has shown that seat belts save lives, and they can redu...

  • Page 53

    The outboard front passenger seat beltalert® is not active when the outboard front passenger seat is unoc- cupied. Beltalert® may be triggered when an animal or heavy object is on the outboard front passenger seat or when the seat is folded flat (if equipped). It is recom- mended that pets be restra...

  • Page 54

    Warning! • relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags won’t deploy at all. Always wear your seat belt even though you have air bags. • in a collision, you and your p...

  • Page 55

    Warning! (continued) • a lap belt worn too high can increase the risk of injury in a collision. The seat belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap part of your seat belt as low as possible and keep it snug. • a twisted seat belt may not pro...

  • Page 56

    Warning! (continued) • a shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together. • a frayed or torn seat belt could rip apa...

  • Page 57

    3. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” pulling out the latch plate inserting latch plate into buckle 2 things to know before starting your vehicle 55.

  • Page 58

    4. Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug seat belt reduces the risk of sliding...

  • Page 59

    • if the rear seatback is properly latched and the rear center lap/shoulder belt still cannot be pulled out, the automatic-locking retractor (alr) system may be activated. To reset this feature you must let all of the seat belt webbing return into the retractor. You will not be able to pull out more...

  • Page 60

    Adjustable upper shoulder belt anchorage in the driver and front passenger seats, the top of the shoulder belt can be adjusted upward or downward to position the seat belt away from your neck. Push or squeeze the anchorage button to release the anchorage, and move it up or down to the position that ...

  • Page 61

    Note: the adjustable upper shoulder belt anchorage is equipped with an easy up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release but- ton. To verify the shoulder belt anchorage is latched, pull downward on the shou...

  • Page 62

    Seat belts and pregnant women we recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the seat belt across the thighs and as snug across the hips as possible. Keep the se...

  • Page 63

    For additional information, refer to “installing child restraints using the vehicle seat belt” under the “child restraints” section of this manual. The graphics below defines the type of feature for each seating position. If the passenger seating position is equipped with an alr and is being used fo...

  • Page 64

    Will hear a clicking sound as the seat belt retracts. Allow the webbing to retract completely in this case and then carefully pull out only the amount of webbing necessary to comfortably wrap around the occupant’s mid-section. Slide the latch plate into the buckle until you hear a # click. # in auto...

  • Page 65

    How to disengage the automatic locking mode unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Warning! • the seat belt assembly must be replaced if the switchable automati...

  • Page 66

    • knee impact bolsters • advanced front air bags • supplemental side air bags • front and side impact sensors • seat belt pretensioners • seat belt buckle switch • seat track position sensors advanced front air bags this vehicle has advanced front air bags for both the driver and front passenger as ...

  • Page 67

    Warning! • being too close to the steering wheel or instrument panel during advanced front air bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • never place a rear-fa...

  • Page 68

    This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the driver or front passenger seat belt is buckled. The seat belt buckle switch may adjust the inflation rate of the advanced front air bags. Warning! • no objects should be placed over or ...

  • Page 69

    Advanced front air bag operation advanced front air bags are designed to provide addi- tional protection by supplementing the seat belts. Ad- vanced front air bags are not expected to reduce the risk of injury in rear, side, or rollover collisions. The ad- vanced front air bags will not deploy in al...

  • Page 70

    Knee impact bolsters the knee impact bolsters help protect the knees of the driver and front passenger, and position the front occu- pants for improved interaction with the advanced front air bags. Warning! • do not drill, cut, or tamper with the knee impact bolsters in any way. • do not mount any a...

  • Page 71

    Deploys through the seat seam into the space between the occupant and the door. The sab moves at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the sab inflates. Children are at an even greater risk o...

  • Page 72

    Seat belts (and child restraints where appropriate) are necessary for your protection in all collisions. They also help keep you in position, away from an inflating sab. To get the best protection from the sabs, occupants must wear their seat belts properly and sit upright with their backs against t...

  • Page 73

    If you do have a collision, which deploys the air bags, any or all of the following may occur: • the air bag material may sometimes cause abrasions and/or skin reddening to the occupants as the air bags deploy and unfold. The abrasions are similar to fric- tion rope burns or those you might get slid...

  • Page 74

    • after any collision, the vehicle should be taken to an authorized dealer immediately. Enhanced accident response system in the event of an impact, if the communication network remains intact, and the power remains intact, depending on the nature of the event, the orc will determine whether to have...

  • Page 75

    The orc contains a backup power supply system that may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment. The orc turns on the air bag warning light in the instrument panel for approximately four to eight seconds for a self-check when the ignition swi...

  • Page 76

    Warning! Ignoring the air bag warning light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have ...

  • Page 77

    Warning! (continued) • do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, including your trim cover and cushion,...

  • Page 78

    These data can help provide a better understanding of the circumstances in which crashes and injuries occur. Note: edr data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the edr under normal driving conditions and no per- sonal data (e.G., name, g...

  • Page 79

    Warning! (continued) great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper restraint for the child’s size. There are different sizes and types of restraints for children from newborn ...

  • Page 80

    Summary of recommendations for restraining children in vehicles child size, height, weight or age recommended type of child restraint infants and toddlers children who are two years old or younger and who have not reached the height or weight limits of their child restraint either an infant carrier ...

  • Page 81

    Infants and child restraints safety experts recommend that children ride rear-facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear-facing child restraint. Two types of child restraints can be used rear-facing: infant carriers and conv...

  • Page 82

    All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly. If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, the...

  • Page 83

    Children too large for booster seats children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether ...

  • Page 84

    Recommendations for attaching child restraints restraint type combined weight of the child + child restraint use any attachment method shown with an “x” below latch – lower anchors only seat belt only latch – lower anchors + top tether anchor seat belt + top tether anchor rear-facing child restraint...

  • Page 85

    Lower anchors and tethers for children (latch) restraint system your vehicle is equipped with the child restraint anchor- age system called latch, which stands for lower anchors and tethers for children. The latch system has three vehicle anchor points for installing latch- equipped child seats. The...

  • Page 86

    Latch positions for installing child restraints in this vehicle latch positions (two-door models) lower anchorage symbol 2 anchorages per seating position top tether anchorage symbol latch positions (four-door models) lower anchorage symbol 2 anchorages per seating position top tether anchorage symb...

  • Page 87

    What is the weight limit (child’s weight + weight of the child restraint) for using the latch anchorage system to attach the child restraint? 65 lbs (29.5 kg) use the latch anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg). Use the seat belt and teth...

  • Page 88

    Can two child restraints be attached using a common lower latch anchorage? No never “share” a latch anchorage with two or more child restraints. If the center position does not have dedicated latch lower anchorages, use the seat belt to in- stall a child seat in the center position next to a child s...

  • Page 89

    Locating the latch anchorages the lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage sym- bols on the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel the...

  • Page 90

    Locating the tether anchorages in addition, there are tether strap anchors lo- cated behind each rear seatback, near to the floor. Latch anchorages (four-door models) tether strap mounting (two-door models) 88 things to know before starting your vehicle.

  • Page 91

    Latch-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage. Forward-facing child restraints and some rear-facing child restraints...

  • Page 92

    Warning! Never use the same lower anchorage to attach more than one child restraint. If you are installing latch- compatible child restraints next to each other, you must use the seat belt for the center position. You can then use either the latch anchors or the vehicle’s seat belt for installing ch...

  • Page 93

    5. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section “installing child restraints using the top tether anchorage” for direc- tions to attach a tether anchor. 6. Tighten all of the straps as you push the child restraint rearward and downward into the s...

  • Page 94

    Warning! • improper installation of a child restraint to the latch anchorages can lead to failure of the re- straint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. • child restraint anchorages ar...

  • Page 95

    Lap/shoulder belt systems for installing child restraints in this vehicle two-door models four-door models • alr = switchable automatic locking retractor • top tether anchorage symbol 2 things to know before starting your vehicle 93.

  • Page 96

    What is the weight limit (child’s weight + weight of the child re- straint) for using the tether anchor with the seat belt to attach a forward facing child restraint? Weight limit of the child restraint always use the tether anchor when using the seat belt to install a for- ward facing child restrai...

  • Page 97

    Installing a child restraint with a switchable automatic locking retractor (alr) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be moved forward and r...

  • Page 98

    Strap. See the section “installing child restraints using the top tether anchorage” for directions to attach a tether anchor. 9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the seat belt path. It should not move more than 1 inch (25.4 mm) in any ...

  • Page 99

    4. Remove slack in the tether strap according to the child restraint manufacturer’s instructions. Tether strap mounting (two-door models) tether strap mounting (four-door models) 2 things to know before starting your vehicle 97.

  • Page 100

    Warning! • an incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap. • if your vehicle is equipped with a split rear seat, make sure the tethe...

  • Page 101

    Caution! Never use non-detergent oil or straight mineral oil in the engine or damage may result. Note: a new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of diff...

  • Page 102

    Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (co), follow these safety tips: • do not run the engine in a closed garage or in confined...

  • Page 103

    Safety checks you should make inside the vehicle seat belts inspect the seat belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear s...

  • Page 104

    Warning! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury. • always make sure that floor mats are properly attached to the floor mat fasteners. • never place or install floor mats or other floor coverings in the vehicle that cannot b...

  • Page 105

    Periodic safety checks you should make outside the vehicle tires examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Ch...

  • Page 107: Contents

    Understanding the features of your vehicle contents ! Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 ▫ inside day/night mirror — if equipped . . . . .111 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . .112 ▫ automatic dimming mirror — if equipped . . .112 ▫ power mir...

  • Page 108

    ▫ delete/erase “all” uconnect® phonebook entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124 ▫ list all names in the uconnect® phonebook . . .124 ▫ phone call features . . . . . . . . . . . . . . . . . . .125 ▫ uconnect® phone features . . . . . . . . . . . . . .128 ▫ advanced phone...

  • Page 109

    ▫ replacing the rear seat — two-door models . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 ▫ 60/40 split folding rear seat — four-door models . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 ! To open and close the hood . . . . . . . . .165 ! Lights . . . . . . . . . . . . . . ...

  • Page 110

    ▫ to set a desired speed . . . . . . . . . . . . . . . . .180 ▫ to deactivate . . . . . . . . . . . . . . . . . . . . . . . .181 ▫ to resume speed . . . . . . . . . . . . . . . . . . . . .181 ▫ to vary the speed setting . . . . . . . . . . . . . . .181 ▫ to accelerate for passing . . . . . . . . . ....

  • Page 111

    ▫ front panel(s) installation with rear hard top removed . . . . . . . . . . . . . . . . . . . . . . . . . . .211 ▫ rear hard top removal . . . . . . . . . . . . . . . .212 ▫ rear hard top installation . . . . . . . . . . . . . . .215 ! Door frame. . . . . . . . . . . . . . . . . . . . . . . . .215 ...

  • Page 112

    ▫ lowering the windshield and removing side bars . . . . . . . . . . . . . . . . . . . . . . . . . . .292 ▫ raising the windshield and replacing side bars . . . . . . . . . . . . . . . . . . . . . . . . . . .296 ! Rear window features — hard top only . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 113

    Mirrors inside day/night mirror — if equipped a single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting. The mirror hea...

  • Page 114

    Outside mirrors to receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than the...

  • Page 115

    Caution! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Power mirrors — if equipped the power mirror switch is located on the center of the instrument panel, below the climate...

  • Page 116

    After selecting a mirror, move the knob in the same direction you want the mirror to move. Use the center off position to guard against accidentally moving a mirror position. Heated mirrors — if equipped these mirrors are heated to melt frost or ice. This feature can be activated whenever you turn o...

  • Page 117

    Uconnect® phone — if equipped uconnect® phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect® phone al- lows you to dial a phone number with your mobile phone using simple voice commands (e.G., “call” $ “mike” $ “work” or “dial” $ “248-555-1212”). Your mobile phone’s a...

  • Page 118

    The uconnect® phone is driven through your bluetooth® “hands-free profile” mobile phone. Uconnect® features bluetooth® technology - the global standard that enables different electronic devices to con- nect to each other without wires or a docking station, so uconnect® phone works no matter where yo...

  • Page 119

    Voice command button actual button location may vary with the ra- dio. The individual buttons are described in the “operation” section. The uconnect® phone can be used with any hands-free profile certified bluetooth® mobile phone. See the uconnect® website for supported phones. Refer to your mobile ...

  • Page 120

    Part of the command when you are asked for it. For example, you can use the compound form voice com- mand “phonebook new entry,” or you can break the compound form command into two voice commands: “phonebook” and “new entry.” please remember, the uconnect® phone works best when you talk in a normal ...

  • Page 121

    The following are general phone to uconnect® phone pairing instructions: • push the button to begin. • after the “ready” prompt and the following beep, say “setup phone pairing.” • when prompted, after the beep, say “pair a phone” and follow the audible prompts. • you will be asked to say a four-dig...

  • Page 122

    • the system will prompt you to say the number you want to call. • for example, you can say “234-567-8901.” • the uconnect® phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by saying a name • push the button to begin. • after the “ready...

  • Page 123

    • automatic download and update, if supported, begins as soon as the bluetooth® wireless phone connection is made to the uconnect® phone, for example, after you start the vehicle. • a maximum of 1,000 entries per phone will be down- loaded and updated every time a phone is connected to the uconnect®...

  • Page 124

    • when prompted, enter the number designation (e.G., “home,” “work,” “mobile,” or “other”). This will allow you to store multiple numbers for each phone- book entry, if desired. • when prompted, recite the phone number for the phonebook entry that you are adding. After you are finished adding an ent...

  • Page 125

    Note: • editing names in the phonebook is recommended when the vehicle is not in motion. • automatic downloaded phonebook entries cannot be deleted or edited. “phonebook edit” can be used to add another phone number to a name entry that already exists in the phone- book. For example, the entry john ...

  • Page 126

    Delete/erase “all” uconnect® phonebook entries • push the button to begin. • after the “ready” prompt and the following beep, say “phonebook erase all.” • the uconnect® phone will ask you to verify that you wish to delete all the entries from the phonebook. • after confirmation, the phonebook entrie...

  • Page 127

    Phone call features the following features can be accessed through the uconnect® phone if the feature(s) are available on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the uconnect® phone. Check with your mobile se...

  • Page 128

    “toggling between calls” in this section. To combine two calls, refer to “conference call” in this section. Place/retrieve a call from hold to put a call on hold, push the button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, push and hold th...

  • Page 129

    Call termination to end a call in progress, momentarily push the but- ton. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automati- cally. This ...

  • Page 130

    Uconnect® phone features language selection to change the language that the uconnect® phone is using: • push the button to begin. • after the “ready” prompt and the following beep, say the name of the language you wish to switch to english, espanol, or francais. • continue to follow the system promp...

  • Page 131

    Note: • the emergency number dialed is based on the country where the vehicle is purchased (911 for the u.S. And canada and 060 for mexico). The number dialed may not be applicable with the available mobile service and area. • if supported, this number may be programmable on some systems. To do this...

  • Page 132

    Paging to learn how to page, refer to “working with automated systems.” paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the uconnect® phone. Voice mail calling to learn how to access your voice mail, refer to “working with automate...

  • Page 133

    Send. The uconnect® phone will then send the corre- sponding phone number associated with the phone- book entry, as tones over the phone. Note: • you may not hear all of the tones due to mobile phone network configurations. This is normal. • some paging and voice mail systems have system time out se...

  • Page 134

    Dialing using the mobile phone keypad you can dial a phone number with your mobile phone keypad and still use the uconnect® phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired bluetooth® mobile...

  • Page 135

    Advanced phone connectivity transfer call to and from mobile phone the uconnect® phone allows ongoing calls to be trans- ferred from your mobile phone to the uconnect® phone without terminating the call. To transfer an ongoing call from your uconnect® phone paired mobile phone to the uconnect® phone...

  • Page 136

    • after the “ready” prompt and the following beep, say “setup select phone” and follow the prompts. • you can also push the button at any time while the list is being played, and then choose the phone that you wish to select. • the selected phone will be used for the next phone call. If the selected...

  • Page 137

    • push the button and say the “voice training,” “system training,” or “start voice training” com- mand. You can either push the uconnect® phone button to restore the factory setting or repeat the words and phrases when prompted by the uconnect® phone. For best results, the voice training session sho...

  • Page 138

    • low-to-medium vehicle speed • low road noise • smooth road surface • fully closed windows • dry weather condition note: • even though the system is designed for users speaking in north american english, french, and spanish ac- cents, the system may not always work for some. • when navigating throu...

  • Page 139

    Far end audio performance audio quality is maximized under: • low-to-medium blower setting • low-to-medium vehicle speed • low road noise • smooth road surface • fully closed windows • dry weather conditions • operation from the driver’s seat • performance, such as audio clarity, echo, and loudness ...

  • Page 140

    • after the “ready” prompt and the following beep, say “sms read” or “read messages.” • uconnect® phone will play the new text message for you. After reading a message, you can “reply” or “forward” the message using uconnect® phone. Send messages: you can send messages using uconnect® phone. To send...

  • Page 141

    10. Thanks 11. See you in 15 minutes 12. I am on my way 13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18. When can we meet? 19. Send number to call 20. Start without me turn sms incoming announcement on/off turning the sms incoming announcement ...

  • Page 142

    140 understanding the features of your vehicle.

  • Page 143

    3 understanding the features of your vehicle 141.

  • Page 144

    142 understanding the features of your vehicle.

  • Page 145

    Voice commands primary alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location voice commands primary alternate (s) all call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais 3 understanding th...

  • Page 146

    Voice commands primary alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book voice commands primary alternate (s) previous record again redial return to main menu return or main menu select phone select...

  • Page 147

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 148

    Warning! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your at- tention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. When y...

  • Page 149

    To hear the first available menu, push the voice com- mand button and say “help” or “main menu.” commands the voice command system understands two types of commands, universal commands and local commands. Universal commands are available at all times. Local commands are available if the supported ra...

  • Page 150

    Radio am to switch to the am band, say “am” or “radio am.” in this mode, you may say the following commands: • “frequency #” (to change the frequency) • “next station” (to select the next station) • “previous station” (to select the previous station) • “radio menu” (to switch to the radio menu) • “m...

  • Page 151

    Disc mode to switch to the disc mode, say “disc.” in this mode, you may say the following commands: • “track” (#) (to change the track) • “next track” (to play the next track) • “previous track” (to play the previous track) • “main menu” (to switch to the main menu) usb mode to switch to usb mode, s...

  • Page 152

    Memo mode to switch to the voice recorder mode, say “memo.” in this mode, you may say the following commands: • “new memo” (to record a new memo) — during the recording, you may push the voice command button to stop recording. You proceed by say- ing one of the following commands: – “save” (to save ...

  • Page 153

    • “tutorial” • “voice training” note: keep in mind that you have to push the voice command button first and wait for the beep before speaking the “barge in” commands. Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers the uconnect® voice “v...

  • Page 154

    Warning! (continued) • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. • be sure everyone in your vehicle is in a seat and using a seat belt properl...

  • Page 155

    Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could...

  • Page 156

    Front seatback recline lean forward before lifting the handle, then lean back to the desired position and release the handle. Lift the handle to return the seatback to an upright position. Warning! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your che...

  • Page 157

    Front passenger easy entry seat — two-door models pull upward on the recline lever (toward the rear of the vehicle) and slide the entire seat forward. To return the seat to a sitting position, rotate the seatback upright until it locks and push the seat rearward until the track locks. Easy entry lev...

  • Page 158

    Note: • the front passenger seats have a track memory, which returns the seat to just past the halfway point of the track regardless of its original position. • the recliner and easy entry levers should not be used during the automatic returning of the seat to its sitting position. Tip n’ slide™ sea...

  • Page 159

    Passenger seat in addition to easy entry, the front passenger seat is also equipped with tip n’ slide™. This feature allows for easier entry for rear passengers. Pull upward on the recline lever and slide the entire seat forward (easy entry). With the seat forward, pull the entire seat assembly towa...

  • Page 160

    Heated seats — if equipped on some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks. There are two heated seat switches that allow the driver and passenger to operate the seats independently. The controls for each seat are located on a...

  • Page 161

    Two to one, indicating the change. The low-level setting will turn off automatically after approximately 30 min- utes. Note: when a heat setting is selected, heat will be felt within two to five minutes. Warning! • persons who are unable to feel pain to the skin because of advanced age, chronic illn...

  • Page 162

    Warning! The head restraints for all occupants must be prop- erly adjusted prior to operating the vehicle or occu- pying a seat. Head restraints should never be ad- justed while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious in...

  • Page 163

    “occupant restraints” in “things to know before start- ing your vehicle” for information on child seat tether routing. Rear head restraints — 4 door model the rear seat is equipped with nonadjustable head re- straints. Refer to “occupant restraints” in “things to know before starting your vehicle” f...

  • Page 164

    3. Return the seat to the normal position. 4. Raise the rear seatback using the assist strap and firmly lock the seat into position. Removing the rear seat — two-door models warning! • it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in...

  • Page 165

    2. Press down on the release bar on each side, and pull the seat out and away from the lower bracket. 3. Remove the seat from the vehicle. Replacing the rear seat — two-door models reverse the steps for removing the seat. Warning! • to help protect against personal injury, passengers should not be s...

  • Page 166

    • be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily. Warning! • it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injur...

  • Page 167

    To raise the rear seat raise the seatback and lock it into place. If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. Note: if the rear seatback is not fully latched, the center shoulder belt will not be ab...

  • Page 168

    To push down slightly on the hood before pushing the safety latch. Insert the support rod into the slot on the hood. To close the hood, remove the support rod from the hood panel and place it in the retaining clip. Lower the hood slowly. Secure both of the hood latches. Warning! Be sure the hood is ...

  • Page 169

    Headlights and parking lights turn the end of the multifunction lever to the first detent for parking light operation. Turn to the second detent for headlight operation. Multifunction lever headlight switch 3 understanding the features of your vehicle 167.

  • Page 170

    Automatic headlights — if equipped this system automatically turns the headlights on or off according to ambient light levels. To turn the system on, turn the end of the multifunction lever to the auto position (third detent). When the system is on, the headlight time delay feature is also on. This ...

  • Page 171

    Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Note: • if either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside...

  • Page 172

    High/low beam switch push the multifunction lever away from you to switch the headlights to high beam. Pull the lever toward you, to switch the headlights back to low beam. Flash-to-pass you can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This w...

  • Page 173

    Daytime running lights — if equipped the headlights come on at a low intensity level when shifted into any position other than park (auto trans- mission) or when the vehicle begins to move (manual transmission). Note: the daytime running light on the same side of the vehicle as the active turn signa...

  • Page 174

    Courtesy/reading lights two courtesy/reading lights are located in the bottom of the rearview mirror. You can turn these lights on and off from the switches in the mirror or from the dimmer control in the multifunction lever. These lights are also controlled automatically by the illuminated entry sy...

  • Page 175

    Cargo lamp the courtesy and dome lights will turn on when the front doors are opened, by rotating the control for the dimmer switch on the multifunction lever fully upward, or if equipped, when the unlock button is pressed on the remote keyless entry (rke) transmitter. The sports bar reading lights ...

  • Page 176

    When a door is open and the interior lights are on, rotating the dimmer control to the extreme bottom posi- tion will cause all the interior lights to turn off. This is also known as the “party” mode because it allows the doors to stay open for extended periods of time without discharging the vehicl...

  • Page 177

    Windshield wiper operation rotate the end of the lever upward to the second detent past the intermittent settings for low-speed wiper opera- tion. Rotate the end of the lever upward to the third detent past the intermittent settings for high-speed wiper operation. Windshield wiper/washer lever front...

  • Page 178

    Caution! In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted. Intermittent wiper ...

  • Page 179

    Windshield washers to use the washer, pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will start and continue to operate for two or three wipe cycles after the lever is released, and then resume the intermittent interval previousl...

  • Page 180

    Tilt steering column this feature allows you to tilt the steering column upward or downward. The tilt lever is located on the steering column, below the turn signal lever. Push down on the lever to unlock the steering column. With one hand firmly on the steering wheel, move the steering column up or...

  • Page 181

    Warning! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. Electronic speed control ...

  • Page 182

    Note: in order to ensure proper operation, the elec- tronic speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the electronic speed control system can be reactivated by pushing the electronic speed control on/off but...

  • Page 183

    To deactivate a soft tap on the brake pedal, pushing the cancel button, or normal brake pressure while slowing the vehicle will deactivate the electronic speed control with- out erasing the set speed from memory. Pressing the on/off button or turning the ignition switch off erases the set speed from...

  • Page 184

    To decrease speed when the electronic speed control is set, you can de- crease speed by pushing the set (-) button. The speed decrement shown is dependant on the chosen speed unit of u.S. (mph) or metric (km/h): u.S. Speed (mph) • pressing the set (-) button once will result in a 1 mph decrease in s...

  • Page 185

    Warning! Electronic speed control can be dangerous where the system cannot maintain a constant speed. Your ve- hicle could go too fast for the conditions, and you could lose control and have an accident. Do not use electronic speed control in heavy traffic or on roads that are winding, icy, snow-cov...

  • Page 186

    A second power outlet is located inside the center console and is powered directly from the vehicle battery. Caution! • do not exceed the maximum power of 160 watts (13 amps) at 12 volts. If the 160 watt (13 amp) power rating is exceeded the fuse protecting the system will need to be replaced. • pow...

  • Page 187

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 188

    Caution! • many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.E., mobile phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • acce...

  • Page 189

    The power inverter is designed with built-in overload protection. If the power rating of 150 watts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed from the outlet the inverter should automatically reset. If the power rating exceeds approximat...

  • Page 190

    Warning! To avoid serious injury or death: • do not insert any objects into the receptacles. • do not touch with wet hands. • close the lid when not in use. • if this outlet is mishandled, it may cause an electric shock and failure. Cupholders front cupholders the front cupholders are located in the...

  • Page 191

    Rear cupholders the rear cupholders are located on the back of the center console. Storage glove compartment the lockable glove compartment is located on the pas- senger side of the lower instrument panel. Pull outward on the handle/latch to open the glove compartment. Console storage compartment to...

  • Page 192

    There is an extra storage area underneath the console lid. The console lid has an integrated paper clip feature that can hold small items. Center console center console lid storage 190 understanding the features of your vehicle.

  • Page 193

    Rear storage compartment — if equipped the rear cargo area storage compartment cover is held by a spring-loaded latch. In order to remove the rear storage compartment cover, use the following procedure: note: the rear storage compartment latch should not be used as cargo tie-down. 1. Flip up the pul...

  • Page 194

    Dual top — two-door models — if equipped if your vehicle is equipped with a dual top, you must remove one of the tops from the vehicle. If the soft top is removed, the pivot brackets must also be removed from the sport bar. The soft top was installed at the factory for shipping purposes only. The so...

  • Page 195

    4. Disconnect the knuckles from the left and right metal pivot brackets. Remove the soft top from the vehicle and store in a clean, dry location. Note: to aid in disconnecting the knuckles, you may carefully tap on the knuckles using a rubber mallet. 5. Unzip the zipper on the sport bar cover to exp...

  • Page 196

    Installing the soft top — two-door models note: the following procedures are for first time set up only. For future soft top procedures, refer to “soft top” in this section. 1. Locate and remove the following items prior to hard top removal: • right and left door frames • door frame attachment knobs...

  • Page 197

    Caution! Do not overtighten the screws. You can strip the screws if they are overtightened. 5. Remove the swing gate bar (black metal bar for bottom of rear window) and set aside. 3 understanding the features of your vehicle 195.

  • Page 198

    Note: be sure the wire harness in the left rear corner is not tangled in the soft top bows before you lift the top. 6. Unsnap and remove the black boot cover. This cover should be discarded. It was intended as a protective cover for shipping only. Note: a visual instruction sheet is enclosed in the ...

  • Page 199

    3. Ensure the tether strap is secure to the pivot bracket. Unbutton the side bow tether strap (both sides). 4. Using the plastic reinforcement as a handle, slide the tether strap up the side bow (both sides). 5. The tether strap must be hooked onto the pivot bracket prior to removal of soft top from...

  • Page 200

    6. Remove the soft top bow assembly pivot bracket bolts (two per side) from the sport bar using a 10.0 mm wrench or socket driver. 7. Lift the soft top in a upward motion to release the pivot bracket from the sport bar bracket. 8. Remove the soft top from the vehicle and store in a clean, dry locati...

  • Page 201

    9. Reinstall the hard top. Refer to “freedom top™ three- piece modular hard top — front/rear panel instal- lation” in this section. Installing the soft top — four-door models note: the following procedures are for first time set up only. For future soft top procedures, refer to “soft top” in this se...

  • Page 202

    4. Install the soft top with the pivot brackets above the sport bar brackets, lower the soft top into the sport bar bracket slots in a downward motion to lock tab on soft top. You will need to lift the top to get the brackets to line up. (another person may be needed to help with this operation.) no...

  • Page 203

    6. Install the pivot bracket bolts back into place using a 10.0 mm wrench or socket driver. Secure them until they are snug, being careful not to cross-thread the screws or overtighten. Caution! Do not overtighten the screws. You can strip the screws if they are overtightened. 7. Remove the tether s...

  • Page 204

    8. Using the plastic reinforcement as a handle remove the tether strap from the bracket hook by sliding strap up off hook and slide down the side bow (both sides). 9. Button the side bow tether strap (both sides). 10. Remove the swing gate bar (black metal bar for bottom of rear window) and set asid...

  • Page 205

    11. Unsnap and remove the black boot cover. This cover should be discarded. It was intended as a protective cover for shipping only. Note: a visual instruction sheet is enclosed in the dual top wrap. 12. Put up the soft top. Refer to “soft top — putting up the soft top” in this section. Freedom top™...

  • Page 206

    Caution! Failure to follow these cautions may cause interior water damage, stains or mildew: • it is recommended that the top be free of water prior to panel removal. Removing the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicles interior. • the ...

  • Page 207

    3. Turn the center l-shaped locks (two) from the center of the roof panel. 4. Turn the rear l-shaped lock (located above the shoul- der belt anchorage). 3 understanding the features of your vehicle 205.

  • Page 208

    5. Unlatch the header panel latch located at the top of the windshield. 6. Remove the left-hand panel. To remove the right panel, follow the steps above except for step 3. 206 understanding the features of your vehicle.

  • Page 209

    Freedom top™ storage bag vehicles equipped with a freedom top™ modular hard top, come with a freedom top™ storage bag that allows you to store your freedom top™ panels. The storage bag contains two compartments and fits behind the rear seat. Lay the freedom bag down so the loops and hooks are facing...

  • Page 210

    Insert the left-side freedom panel into the bag with the latches facing upward. Note: ensure the front freedom panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the freedom bag closed. 208 understanding the features of your vehicle.

  • Page 211

    Install the seat attachment strap (at the top of the bag) through the loops. Lift the freedom bag into the vehicle with the hooks and straps facing the back of the rear seat. Attach the clips at the bottom of the bag to the child restraint anchorages, located at the base of the rear seat. 3 understa...

  • Page 212

    Wrap the upper strap around the rear head restraints and loop the strap through the buckle. Pull on the strap to tighten the freedom bag securely against the rear seat. 210 understanding the features of your vehicle.

  • Page 213

    Front panel(s) installation note: set the panels on the windshield frame so that there is no overhang. Also, make sure that the panels are sitting flush with the body. 1. Install the right panel first, then the left panel. 2. Reinstall the panel(s) using the same steps for removal in reverse order. ...

  • Page 214

    Rear hard top removal 1. Remove both front panels. Refer to “front panel(s) removal” in this section. 2. Open both doors. 3. Remove the two torx® head screws that secure the hard top at the b-pillar (near the top of the door) using a #40 torx® head driver (four–door only). 4. Remove the six torx® he...

  • Page 215

    7. Release the red locking tab by pulling outward to the right. 8. To remove the wiring harness press the tab and pull downward to disconnect. Wire harness connector red locking tab 3 understanding the features of your vehicle 213.

  • Page 216

    9. To remove the washer hose, pinch the grips on hose connector and pull downward. 10. Close the swing gate. 11. Remove the hard top from the vehicle. Place the hard top on a soft surface to prevent damage. Press tab to disconnect pinch grip on hose 214 understanding the features of your vehicle.

  • Page 217

    Caution! The removal of the freedom top™ requires four adults located on each corner. Failure to follow this caution could damage the freedom top™. Rear hard top installation note: if the door frames are installed from soft top usage, they must be removed prior to installation of the hard top. 1. In...

  • Page 218

    Caution! (continued) • careless handling and storage of the removable door frame(s) may damage the seals, causing water to leak into the vehicle’s interior. • the door frame(s) must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle’s interior. W...

  • Page 219

    Warning! Use both hands to remove the door frames. The door frames will fold and could cause injury if both hands are not used. 2. Place one hand on the upper rear and one hand on the front of the door frame. 3. Pull the frame toward you with your rearward hand to remove the frame from the vehicle. ...

  • Page 220

    Warning! • do not drive your vehicle on public roads with the door frame(s) removed as you will lose the protec- tion that they can provide. This procedure is fur- nished for use during off-road operation only. • do not drive your vehicle on public roads with the doors removed as you will lose the p...

  • Page 221

    Door frame installation — two-door models — if equipped 1. Unfold door frame and unscrew thumbscrews. 2. Set the door frame pin into the hole on top of the body side, behind the door opening. 3. After the door frame pin has been set into the body side hole, carefully set the front of the door frame ...

  • Page 222

    5. Starting with the front knob, screw in and tighten both knobs. Repeat on the other side. Door frame installation — four-door models — if equipped 1. Install the rear door frame first. 2. Set the door frame pin into the hole on top of the body side, just behind the rear door opening. 220 understan...

  • Page 223

    3. Position the top of the door frame against the metal sport bar and press onto the side bar making sure not to pinch the material of the sports bar covers and to ensure it is properly positioned on the seal above the front of the rear door. 4. Loosely install the rear knob (long knob) to hold the ...

  • Page 224

    7. Position the rear of the front door frame to lay on top of the front of the rear door frame. Ensure the seals are installed correctly to avoid water leaks. 8. Loosely install both knobs beginning with the front knob (long knob). Then, install the middle knob (short knob) through the front and rea...

  • Page 225

    Soft top — two-door models please visit the owners manual on your dvd for instructional videos. Caution! The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunt- ing, or camping supplies, and/or luggage, etc. Also, it was not designed as a structura...

  • Page 226

    Caution! (continued) • refer to “appearance care for fabric top models” in “maintaining your vehicle” for further informa- tion. It contains important information on cleaning and caring for your vehicle’s fabric top. • do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clip...

  • Page 227

    Caution! (continued) • careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle’s interior. • the soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle’s interior. Quick steps to loweri...

  • Page 228

    2. Remove the back window. 3. Release header latches from the windshield frame. 226 understanding the features of your vehicle.

  • Page 229

    4. Release the sail panel retainers from the body side channel at the rear corners of the vehicle. Note: when releasing the sail panel retainers, it is helpful to pull down on the rear roof bow. 5. Make sure the plastic sleeves are slid rearward over the sunrider® link to lock in the link (sunrider®...

  • Page 230

    6. As you begin to lower the top, fold the sail panels so that they rest on top of the soft top. 7. Release the sunrider® latch (both sides). 228 understanding the features of your vehicle.

  • Page 231

    8. Open the swing gate and lower the top. Note: ensure fabric does not overhang the sides of the vehicle. Quick steps to raising the soft top refer to “raising the soft top” in this section for further information. 1. Open the swing gate and raise the top, engaging the sunrider® latches (another per...

  • Page 232

    2. Engage header latches. 230 understanding the features of your vehicle.

  • Page 233

    3. Install rear corner panels. 4. Install the back window. 3 understanding the features of your vehicle 231.

  • Page 234

    5. Install the side windows. 6. To install the side windows, affix the window tempo- rarily by attaching to the velcro® in the rear corner. Start the zipper but close only about 1 in (2.5 cm). 7. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated ...

  • Page 235

    8. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the vel- cro® along the top and rear of the window. Repeat this step for the opposite side. 1 ...

  • Page 236

    Lowering the soft top 1 — header bow 6 — quarter window 2 — 2–bow 7 — check strap 3 — 3–bow 8 — front retainer — quarter window 4 — sail panel 9 — bottom retainer — quarter window 5 — body side retainer 234 understanding the features of your vehicle.

  • Page 237

    1 — zipper start 2 — zipper finish 3 — swing gate bar 4 — swing gate brackets 5 — sail panels 3 understanding the features of your vehicle 235.

  • Page 238

    Note: clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers are difficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush. Cleaning products are available through your authorized dealer. 1. I...

  • Page 239

    4. Open the swing gate. 5. Before unzipping the rear window, release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the swing gate bar by pulling it straight rearward out of the swing gate brackets. • unzip the rear window starting at the right lower corner of the window. Pull ...

  • Page 240

    6. Remove the rear window retainer from the swing gate bracket on both the left and right sides. 7. Stow the windows carefully to avoid scratching. 8. Undo the velcro® that runs along the top and rear edge of the side window. 9. Beginning from the rear lower corner, completely unzip the window. 10. ...

  • Page 241

    11. Finish releasing the sail panel retainers from the body side channel at the rear corners of the vehicle. Note: when releasing the sail panel retainers, it is helpful to pull down on the rear roof bow. 12. As you begin to lower the top, fold the sail panels so that they rest on top of the soft to...

  • Page 242

    13. The swing gate brackets do not need to be removed unless the hard top is being installed. To remove the swing gate brackets, pull the front of the bracket forward while rolling the entire bracket back in toward the vehicle to disengage. 14. Completely release the latches from the loops on the wi...

  • Page 243

    15. Make sure the plastic sleeves are slid rearward over the sunrider® link to lock in the link (sunrider® models only). 16. Unlatch the side bows from both door rails (sun- rider® models only). 3 understanding the features of your vehicle 241.

  • Page 244

    17. Before lowering the top, open the swing gate to prevent possible damage to the rear center high- mounted brake light. Move to the front of the vehicle. Grasp the side bow behind the header and lift the top, folding it toward the rear of the vehicle. Note: help from another person will ease this ...

  • Page 245

    18. Tuck the fabric and the check straps between the bows and as far inward as possible. This will keep any portion of the top from flapping outside of the vehicle. 19. Close the front header latches. 20. Remove the door frames, if desired. Refer to “door frame” in this section for further informati...

  • Page 246

    4. Standing on the side of the vehicle, lift the top by the side bow and the 2–bow (middle bow) up and over the sports bar until the header rests on the top of the windshield frame. 5. Make sure the sunrider® bracket on the side bows latches to the door rails (sunrider® models only). 244 understandi...

  • Page 247

    6. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches). 7. If the swing gate brackets were removed, install them by hooking the rear edge of the bracket on the interior side of the body channel. Then, rotate it rearward and over the channel u...

  • Page 248

    8. Move to the rear of the vehicle and gently pull the sail panels over the rear roof bow. 9. Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) toward the rear window loose (on both sides). Pulling down on the rear roof bow (3–bow) will aid to reac...

  • Page 249

    10. To install the side windows, affix the window tempo- rarily by attaching to the velcro® in the rear corner. Start the zipper but close only about 1 in (2.5 cm). 11. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on ...

  • Page 250

    12. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the velcro® along the top and rear of the window. Repeat this step for the opposite side. 1 —...

  • Page 251

    13. Locate the black swing gate bar. Slide the swing gate bar over the receiver at the bottom inside of the rear window. The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed. 3 understanding the features of your vehicle 249.

  • Page 252

    14. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to prevent damage. 15. Run the zipper fully around to the right side of the window. 250 understanding the features of ...

  • Page 253

    16. Grasp the swing gate bar and position it into the swing gate brackets. 17. Insert the rear window retainer into the swing gate bracket on both the left and right sides. 3 understanding the features of your vehicle 251.

  • Page 254

    18. Apply downward pressure on the top corner of the rear soft top bow (3–bow), then complete attaching the sail panel retainers into the body side channel. 19. Close the header latches and return the sun visors to their secured position. Sunrider® (two-door models) caution! Operating the top, openi...

  • Page 255

    Opening the sunrider® 1. Unclip and move the sun visors to the side. 2. Release the header latches from the loops on the windshield frame. 3. Make sure to slide the plastic sleeves forward to unlock the sunrider® links. 3 understanding the features of your vehicle 253.

  • Page 256

    4. Grasp the header and lift the top back. Make sure the material is folded back as shown. Note: the sunrider® latch on the door rail should not be activated for sunrider® use. If activated, the soft top must be reinstalled starting from the sail panels. 5. Locate the straps to secure the side bows....

  • Page 257

    Closing the sunrider® 1. Remove the straps from the side bows. 2. Unclip and move the sun visors to the side. 3. Grasp the front header and pull it to the front of the vehicle. 4. Hook the header latches to the loops on the wind- shield frame, close latches, and return the sun visors to their origin...

  • Page 258

    Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be snapped into place. If the tempera- ture is 41°f (5°c) or below, do not attempt to put the top down or roll the rear or side curtains. Caution! • do not run a f...

  • Page 259

    Warning! • do not drive the vehicle with the rear window curtain up unless the side curtains are also open. Dangerous exhaust gases which can kill could enter the vehicle. • the fabric upper doors and fabric top are designed only for protection against the elements. Do not rely on them to contain oc...

  • Page 260

    Note: do not remove any of the three attachment knobs unless you are planning on installing the hard top. Quick steps for lowering the soft top 1. Remove the side windows. 258 understanding the features of your vehicle.

  • Page 261

    2. Remove the back window. Note: start zipper from the right side to remove back window. 3. Release header latches from the windshield frame. 3 understanding the features of your vehicle 259.

  • Page 262

    4. Release the sail panel retainers from the body side channel at the rear corners of the vehicle. Note: when releasing the sail panel retainers, it is helpful to pull down on the rear roof bow. 5. Fold the sail panels so that they rest on top of the soft top. 260 understanding the features of your ...

  • Page 263

    6. Fold header rearward, pulling the fabric to the rear. 3 understanding the features of your vehicle 261.

  • Page 264

    7. Release sunrider® latch (both sides). 8. Open the swing gate and lower the top. Note: ensure the fabric does not overhang the sides of the vehicle. 262 understanding the features of your vehicle.

  • Page 265

    Quick steps for raising the soft top 1. Open the swing gate and raise the top, engaging the sunrider® latches (another person may be needed to help with this operation). 3 understanding the features of your vehicle 263.

  • Page 266

    2. Install rear corner panels. 3. Rotate the header forward. 264 understanding the features of your vehicle.

  • Page 267

    4. Engage the header latches. 5. Install the back window. 3 understanding the features of your vehicle 265.

  • Page 268

    6. Install the side windows. 7. To install the side windows, affix the window tempo- rarily by attaching to the velcro® in the rear corner. Start the zipper but close only about 1 in (2.5 cm). 8. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated ...

  • Page 269

    Properly positioned on the door frame. Failure to do so can result in wind and water leaks or damage to the window. 9. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper com...

  • Page 270

    Folding down the soft top 1 — header bow 6 — body side retainer 2 — 2–bow 7 — quarter window 3 — 3–bow 8 — check strap 4 — 4–bow 9 — front retainer — quarter window 5 — sail panel 10 — bottom retainer — quarter window 268 understanding the features of your vehicle.

  • Page 271

    1 — zipper start 2 — zipper finish 3 — swing gate bar 4 — swing gate brackets 5 — sail panels 3 understanding the features of your vehicle 269.

  • Page 272

    Note: clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers are difficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush. Cleaning products are available through your authorized dealer. 1. I...

  • Page 273

    4. Open the swing gate. 5. Before unzipping the rear window, release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the swing gate bar by pulling it straight rearward out of the swing gate brackets. • unzip the rear window starting at the right lower corner of the window. Pull ...

  • Page 274

    6. Remove the rear window retainer from the swing gate bracket on both the left and right sides. 7. Stow the windows carefully to avoid scratching. 8. Undo the velcro® that runs along the top and rear edge of the side window. 9. Beginning from the rear lower corner, completely unzip the window. 10. ...

  • Page 275

    11. Finish releasing the sail panel retainers from the body side channel at the rear corners of the vehicle. Note: when releasing the sail panel retainers, it is helpful to pull down on the rear roof bow. 12. Fold the sail panels so that they rest on top of the soft top. 3 understanding the features...

  • Page 276

    13. The swing gate brackets do not need to be removed unless the hard top is being installed. To remove the swing gate brackets, pull the front of the bracket forward while rolling the entire bracket back in toward the vehicle to disengage. 14. Grasp the front side bow behind the header, and lift th...

  • Page 277

    15. Fold back the front section of the top, pulling the fabric rearward. Gently rest the header on top of the rear portion of the deck. 16. Fold the top so that the material forms a # w # as shown. Enter the vehicle and move the material into two folds. 3 understanding the features of your vehicle 2...

  • Page 278

    17. Release the side bows by pressing down on the latch above the front of the rear door. Push the top rearward to disengage. Repeat this step on the other side. 18. Before lowering the top, open the swing gate to prevent possible damage to the rear center high- mounted brake light. Grasp the folded...

  • Page 279

    19. Gently slide the side bows off the door frame track and lower the top down into the vehicle. Note: help from another person will ease this opera- tion. 20. Tuck the fabric and the check straps between the bows as far inside as possible. This will keep any portion of the top from flapping outside...

  • Page 280

    22. Close the front header latches. 23. Remove the door frames, if desired. Refer to “door frame” in this section for further information. Putting up the soft top note: be extremely careful when putting up the soft top to prevent the doors from getting scratched. It may be helpful to open the rear d...

  • Page 281

    4. Grasp the folded side bows and lift to the top of the rear door frames. Note: help from another person will ease this opera- tion. 5. Insert the slider feature of the knuckles into the door frame tracks and slide the top forward. 3 understanding the features of your vehicle 279.

  • Page 282

    6. Ensure that the top locks into the sunrider® locking mechanisms that are located above the front of the rear doors. 7. Unclip and move the sun visors to the side. 8. Standing on the side of the vehicle, lift the top by the side bow until it rests on the windshield frame. 280 understanding the fea...

  • Page 283

    9. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches). 10. If the swing gate brackets were removed, install them by hooking the rear edge of the bracket on the interior side of the body channel. Then, rotate it rearward and over the channel ...

  • Page 284

    11. Ensure that the straps are positioned correctly before pulling the sail panels over the rear roof bow (4– bow). Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) toward the rear window loose (on both sides). Pulling down on the rear roof bow (4...

  • Page 285

    12. To install the side windows, affix the window tem- porarily by attaching it to the velcro® in the upper rear corner. Start the zipper but close only about 1 in (2.5 cm). 13. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated and properly posit...

  • Page 286

    14. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the velcro® along the top and rear of the window. Repeat this step for the opposite side. 1 —...

  • Page 287

    15. Locate the black swing gate bar. Slide the swing gate bar over the receiver at the bottom inside of the rear window. The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed. 3 understanding the features of your vehicle 285.

  • Page 288

    16. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to prevent damage. 17. Run the first zipper fully around to the right side of the window. 18. Grasp the swing gate bar...

  • Page 289

    19. Insert the rear window retainer into the swing gate bracket on both the left and right sides. 20. Complete the installation of the sail panel by insert- ing the rest of the retainer into the body channel. 21. Close the header latches and return the sun visors to their secured position. 3 underst...

  • Page 290

    Sunrider® (four-door models) caution! Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle’s interior. Note: if you are going to be driving faster than 40 mph (64 km/h) with the sunrider® feature open, it is recom- mended that you remov...

  • Page 291

    3. Grasp the front side bow behind the header, and lift the top. 4. Fold back the front section of the top and gently rest the header on top of the rear portion of the deck. 3 understanding the features of your vehicle 289.

  • Page 292

    5. Fold the top so that the material forms a # w # as shown. Enter the vehicle and move the material into two folds. 6. Secure the top by using the two provided straps. Each strap will wrap around the side bow and velcro® to itself; use one strap on each side of the vehicle. 290 understanding the fe...

  • Page 293

    Closing the sunrider® perform the above steps in the opposite order. Note: failure to fold the fabric rearward will allow the material to sag and may block the rearview mirror. Folding windshield the fold-down windshield and removable side bars on your vehicle are structural elements that can provid...

  • Page 294

    Warning! Carefully follow these warnings to help protect against personal injury: • do not drive your vehicle on-road with the wind- shield down. • do not drive your vehicle unless the windshield is securely fastened, either up or down. • eye protection, such as goggles, should be worn at all times ...

  • Page 295

    2. Remove the two top hex bolts (13 mm), and the one side hex bolt (13 mm) visible through the trim (do not remove plastic corner trim, sun visor bolts, or sport bar covering). 3. Remove the sun visor. 4. Remove the a-pillar cap. 5. Disconnect microphone (if equipped with uconnect® phone). 6. Open t...

  • Page 296

    Caution! Do not remove the head impact foam from the side bars, as damage to the foam may result. Note: store all of the mounting bolts in their original threaded holes and tighten for safekeeping. 8. Remove the side bar assembly, and reattach the sport bar velcro® covering. 9. To safely store the s...

  • Page 297

    10. Remove the windshield wiper arms by first pulling the wiper away from the windshield and out to the “lock” position. Unsnap the wiper arm nut caps, and remove the retaining nuts. Lift the wiper arms off and store them in the center console or securely behind the rear seat. Note: it may be necess...

  • Page 298

    Raising the windshield and replacing side bars 1. Raise the windshield. 2. Loosely attach the rear of the side bar to the sport bar. Refer to step 4 of “lowering windshield and remov- ing side bars” earlier in this section. • reattach the sport bar velcro® covering. 3. Attach the front of the side b...

  • Page 299

    5. Install the lower windshield plates with the six black round-headed torx® head screws (using a #40 torx® head driver) on each side of the base of the wind- shield. 6. Reinstall the wiper arms. Rear window features — hard top only rear window wiper/washer — if equipped a rotary switch on the cente...

  • Page 300

    Rotate the switch upward to the first detent position for rear wiper operation. Rotate the switch upward past the first detent to activate the rear washer. The washer pump and the wiper will continue to operate as long as the switch is held. Upon release, the wiper will cycle two to three times befo...

  • Page 301

    Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements....

  • Page 303: Contents

    Understanding your instrument panel contents ! Instrument panel features . . . . . . . . . .304 ! Instrument cluster . . . . . . . . . . . . . . . . .305 ! Instrument cluster descriptions . . . . .306 ! Compass and trip computer — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .322 ...

  • Page 304

    ▫ advanced evic messages (customer information features). . . . . . . . . . . . . . . . . . . . . . . . . . . .337 ▫ system status . . . . . . . . . . . . . . . . . . . . . . . .337 ▫ personal settings (customer-programmable features) . . . . . . . . . . . . . . . . . . . . . . . . . . .338 ! Uconne...

  • Page 305

    ! Uconnect® 130 with satellite radio . . . . .372 ▫ operating instructions — radio mode . . . . . .372 ▫ operation instructions — cd mode for cd and mp3 audio play . . . . . . . . . . . . . . . . . . . . . .378 ▫ notes on playing mp3 files . . . . . . . . . . . . .380 ▫ list button — cd mode for mp3...

  • Page 306

    Instrument panel features 1 — air outlet 7 — climate controls 2 — instrument cluster 8 — power outlet 3 — radio 9 — lower switch bank 4 — assist handle 10 — power mirror switch — if equipped 5 — glove compartment 11 — horn 6 — power window switches 304 understanding your instrument panel.

  • Page 307

    Instrument cluster 4 understanding your instrument panel 305.

  • Page 308

    Instrument cluster descriptions 1. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. 2. Charging system light this light shows the status of the electrical charg- ing system. The light should come on when the ignition switch is first ...

  • Page 309

    7. Seat belt reminder light when the ignition switch is first turned to on/ run, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains...

  • Page 310

    If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the brake booster has been detected by the anti-lock brake system (abs) / el...

  • Page 311

    Operation of the brake warning light can be checked by turning the ignition switch from the off position to the on/run position. The light should illuminate for ap- proximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light ...

  • Page 312

    13. Air bag warning light this light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to on/run. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. R...

  • Page 313

    When the engine is running, the mil may flash to alert serious conditions that could lead to immediate loss of power or severe catalytic converter damage. The vehicle should be serviced as soon as possible if this occurs. Caution! Prolonged driving with the malfunction indicator light (mil) on could...

  • Page 314

    Note: as the coolant temperature gauge approaches # h, # this indicator will illuminate and a single chime will sound. Further overheating will cause the temperature gauge to pass # h. # in this case, a continuous chime will sound, until the engine is allowed to cool or the 4 minutes duration is exp...

  • Page 315

    Caution! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “h” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “h” and you hear cont...

  • Page 316

    24. Gear shift indicator this indicator will illuminate when a manual shift is needed either up or down. 25. Odometer / trip odometer display area the odometer display shows the total distance the ve- hicle has been driven. The trip odometer shows indi- vidual trip mileage. Refer to “odometer / trip...

  • Page 317

    Vehicle odometer messages when the appropriate conditions exist, the following odometer messages will display: eco . . . . . . . . . . . . . . . . . . . . . Fuel saver indicator door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door ajar gate . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 318

    Occur when operating the vehicle in a high torque converter slip condition, such as 4-wheel drive operation (e.G., snow plowing, off-road operation). If this “hot- oil” message turns on, stop the vehicle and run the engine at idle or faster with the transmission in neu- tral until the message turns ...

  • Page 319

    Nofuse if the vehicle diagnostic system determines that the ignition off draw (iod) fuse is improperly installed, or damaged, a “nofuse” message will display in the odom- eter display area. For further information on fuses and fuse locations refer to “fuses” in “maintaining your vehicle”. Change oil...

  • Page 320

    26. Hill decent indicator this indicator shows when the hill descent control (hdc) feature is turned on. The lamp will be on solid when hdc is armed. Hdc can only be armed when the transfer case is in the “4wd low” position and the vehicle speed is less then 30 mph (48 km/h). If these conditions are...

  • Page 321

    Maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the tpms low tire pressure telltale. Your vehicle has also been equipped with a tpms malfunction indicator to indicate when the system is not operating properly. The tpms malfunction indicato...

  • Page 322

    29. Electronic stability control (esc) activation/ malfunction indicator light — if equipped the “esc activation/malfunction indicator light” in the instrument cluster will come on when the ignition switch is turned to the on/run position. It should go out with the engine running. If the “esc activa...

  • Page 323

    31. Electronic throttle control (etc) light this light informs you of a problem with the electronic throttle control (etc) system. If a problem is detected while the engine is run- ning, the light will either stay on or flash depending on the nature of the problem. Cycle the ignition key when the ve...

  • Page 324

    Compass and trip computer — if equipped the compass/trip computer features a driver- interactive display (displays information on outside tem- perature, compass direction, and trip information). It is located on the lower left part of the cluster below the speedometer. Compass display 322 understand...

  • Page 325

    Control buttons the compass/temperature control buttons are located on the left spoke of the steering wheel. Push and release the step button on the steering wheel to access the options in the compass display. Note: the system will display the last known outside temperature when starting the vehicle...

  • Page 326

    Compass/temperature display note: if the vehicle is equipped with a chrysler uconnect® gps (navigation radio), the nav system will provide the compass direction, and the variance and calibration menus will be unavailable. The compass will perform accurately, based on gps signals instead of the earth...

  • Page 327

    To set the variance start the engine and leave the transmission gear selector lever in the park position. Press and hold the reset button on the steering wheel (for approximately ten seconds) until the current variance zone number is dis- played. To change the zone, press and release the step button...

  • Page 328

    • magnetic materials should be kept away from the top of the center of the instrument panel. This is where the compass sensor is located. Average fuel economy / distance to empty (dte) / elapsed time • average fuel economy shows the average fuel economy since the last reset. When the fuel economy is...

  • Page 329

    Trip a shows the total distance traveled for trip a since the last reset. Trip b shows the total distance traveled for trip b since the last reset. Eco (fuel saver indicator) — if equipped the eco indicator will illuminate when you are driving in a fuel efficient manner and can be used to modify dri...

  • Page 330

    This system conveniently allows the driver to select a variety of useful information by pushing the switches mounted on the steering wheel. The evic consists of the following: • compass heading (n, s, e, w, ne, nw, se, sw) • outside temperature (°f or °c) • digital speedometer • vehicle info • eco d...

  • Page 331

    The system allows the driver to select information by pushing the following buttons mounted on the steering wheel: • menu button push and release the menu button to advance the display to each of the evic main menu features or to return to the main menu from a sub-menu. Upon reaching the last item i...

  • Page 332

    • select button push and release the select button when prompted by the evic to reset main menu features with a reset capability or to change personal settings. • down button push and release the down button when prompted by the evic to step through stored system warning messages or personal setting...

  • Page 333

    • personal settings not avail. – vehicle in motion — manual transmission • door ajar (with vehicle graphic showing which door is open. A single chime sounds if the vehicle is in motion). • gate ajar (with vehicle graphic showing the liftgate/ back door open and a single chime ) • check gascap (refer...

  • Page 334

    Note: if the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Evic main menu to step to each main menu feature push and release the menu button once for each step. A step from the last item in the list will ...

  • Page 335

    After three seconds without pushing select, reset all will return to reset and only the selected feature will have been reset. Compass, outside temperature display / eco (fuel saver mode) — if equipped the compass readings indicate the direction the vehicle is facing. Push and release the compass bu...

  • Page 336

    Metallic objects) until the “cal” message displayed in the evic turns off. The compass will now function normally. Note: a good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc. Manual compas...

  • Page 337

    Note: magnetic materials should be kept away from the top of the instrument panel; this is where the compass sensor is located. To change the compass variance: 1. Turn the ignition switch run (it is not necessary to start the engine). 2. Push the menu button until personal settings (customer-program...

  • Page 338

    Average fuel economy shows the average fuel economy since the last reset. Average fuel economy can be reset by pushing and holding the select button (as prompted in the evic display). Upon reset, the history information will be erased, and the averaging will continue from the last fuel average readi...

  • Page 339

    Reset all digits will change to zeros and time will start incrementing again if the ignition switch is in run or start. Evic units selection (units in display) displays the units used for the outside temperature, average fuel economy and distance to empty features. Push and release the select button...

  • Page 340

    The down button when system warnings pres- ent is displayed will display each stored warning for each button push. Push and release the menu button to return to the main menu. Personal settings (customer-programmable features) personal settings allows the driver to set and recall features when the v...

  • Page 341

    Rke unlock when driver door 1st press is selected, only the driver’s door will unlock on the first press of the remote keyless entry (rke) transmitter unlock button. When driver door 1st press is selected, you must press the rke transmitter unlock button twice to unlock the passen- ger’s doors. When...

  • Page 342

    Headlamps with wipers (available with auto headlights only) when on is selected, and the headlight switch is in the auto position, the headlights will turn on approxi- mately 10 seconds after the wipers are turned on. If the headlights were turned on by this feature they will also turn off when the ...

  • Page 343

    Display units in the evic can be changed between english and metric units of measure. The units apply to the outside tem- perature, average fuel economy, and distance to empty. To make your selection, press and release the select button until “u.S.” or # metric # appears. Nav–turn by turn — if equip...

  • Page 344

    Uconnect® 230 – am/fm stereo radio and 6–disc cd/dvd changer (mp3/wma aux jack) operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on...

  • Page 345

    Seek buttons push and release the seek buttons to search for the next listenable station in am/fm mode. Push the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations witho...

  • Page 346

    Clock setting procedure 1. Push and hold the time button until the hours blink. 2. Adjust the hours by turning the right side tune/ scroll control knob. 3. After adjusting the hours, push the right side tune/ scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minu...

  • Page 347

    Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the rig...

  • Page 348

    Program type 16-digit character display classical classicl classic rock cls rock college college country country foreign language language information inform jazz jazz news news nostalgia nostalga oldies oldies personality persnlty public public rhythm and blues r & b religious music rel musc progra...

  • Page 349

    If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the preset station. Setup button pushing the setup button allows you to select between the following items: note: turn the tune/scroll control knob to scroll thr...

  • Page 350

    Note: • the available selections for each of the above entries varies depending upon the disc. • these selections can only be made while playing a dvd. • power — allows you to turn the power on and off (if equipped). • lock — locks out rear remote controls (if equipped). • ch1/ch2 — allows the user ...

  • Page 351

    Subtitle language — if equipped selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting # other. # enter the country code using the tune/scroll control knob to...

  • Page 352

    Set button — to set the pushbutton memory when you are receiving a station that you wish to commit to pushbutton memory, push the set button. The symbol set 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station and push and release that button. If a button...

  • Page 353

    To an authorized dealer to change the region code of the player a maximum of five times. Caution! The radio may shut down during extremely hot condi- tions. When this occurs, the radio will indicate “disc hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect th...

  • Page 354

    Push and hold the eject button for five seconds and all cds will be ejected from the radio. The disc can be ejected with the radio and ignition off. Seek button (cd mode) push the right seek button for the next selection on the cd. Push the left seek button to return to the beginning of the current ...

  • Page 355

    Supported media (disc types) the mp3/wma file recording media supported by the radio are cdda, cd-r, cd-rw, mp3,wma, dvd video, dvd-r, dvd-rw, dvd+r, dvd+rw, and cdda+mp3. Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes ...

  • Page 356

    Supported mp3/wma file formats the radio will recognize only files with the *.Mp3/wma extension as mp3/wma files. Non-mp3/wma files named with the *.Mp3/wma extension may cause play- back problems. The radio is designed to recognize the file as an invalid mp3/wma and will not play the file. When usi...

  • Page 357

    Playlist files are not supported. Mp3 pro files are not supported. Playback of mp3/wma files when a medium containing mp3/wma data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3/wma files. ...

  • Page 358

    Push the info button once more to return to # elapsed time # priority mode. Push and hold the info button for three seconds or more and radio will display song titles for each file. Push and hold the info button again for three seconds to return to # elapsed time # display. Operation instructions — ...

  • Page 359

    Time button (auxiliary mode) push the time button to change the display from elapsed playing time to time of day. The time of day will display for five seconds. Rw/ff (auxiliary mode) no function. Set button (auxiliary mode) no function. Operating instructions (voice command system) — if equipped re...

  • Page 360

    Uconnect® (satellite radio) — if equipped satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is sirius satellite radio. This service offers over 130 channels of music, sports, news, entertainme...

  • Page 361

    Sirius id number will display. The sirius id number display will time out in two minutes. Push any button on the radio to exit this screen. Selecting uconnect® (satellite) mode push the sat button until # sat # appears in the display. A cd may remain in the radio while in the satellite radio mode. S...

  • Page 362

    Seek buttons push and release the seek buttons to search for the next listenable station in am/fm mode. Push the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations witho...

  • Page 363

    Toggle the music type button again to select the music type. By pushing the seek button when the music type function is active, the radio will be tuned to the next channel with the same selected music type name. If a preset button is activated while in the music type (program type) mode, the music t...

  • Page 364

    Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the channels that you commit to pushbutton memory (12 satellite stations). Uconnect® 730n/430/430n cd/dvd/hdd/nav — if equipped refer to your uconnect® supplement manual for ...

  • Page 365

    Operating instructions — radio mode note: the ignition switch must be in the on/run or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume ...

  • Page 366

    3. After adjusting the hours, push the right side tune/ scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side tune/ scroll control knob. Push the tune/scroll con- trol knob to save time change. 5. To exit, push any button/knob, or wait fi...

  • Page 367

    Push the rotary tune/scroll control knob a fifth time and fade will display. Turn the tune/scroll control knob to the left or right to adjust the sound level between the front and rear speakers. Push the rotary tune/scroll control knob again to exit setting tone, balance, and fade. Am/fm button push...

  • Page 368

    Disc button pushing the disc button will allow you to switch from am/fm modes to disc modes. Operation instructions — cd mode for cd and mp3 audio play note: • the ignition switch must be in the on/run or acc position to operate the radio. • this radio is capable of playing compact discs (cd), recor...

  • Page 369

    Caution! (continued) • the uconnect® 130 is a single cd player. Do not attempt to insert a second cd if one is already loaded. • dual-media disc types (one side is a dvd, the other side is a cd) should not be used, and they can cause damage to the player. Eject button — ejecting a cd push the eject ...

  • Page 370

    Rw/ff push and hold the ff (fast forward) button and the cd player will begin to fast forward until ff is released, or rw or another cd button is pushed. The rw (reverse) button operates in a similar manner. Am/fm button push the button to select either am or fm mode. Set/rnd button (random play but...

  • Page 371

    The radio uses the following limits for file systems: • maximum number of folder levels: 8 • maximum number of files: 255 • maximum number of folders. (the radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file ...

  • Page 372

    Mpeg specifi- cation sampling fre- quency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title, and...

  • Page 373

    To increase the speed of disc loading, it is recommended to use cd-r media and single-session discs. To create a single-session disc, enable the “disc at once” option before writing to the disc. Operation instructions — auxiliary mode the auxiliary (aux) jack is an audio input jack, which allows the...

  • Page 374

    Uconnect® 130 with satellite radio operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn of...

  • Page 375

    Seek buttons push and release the seek buttons to search for the next listenable station in am/fm mode. Push the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations witho...

  • Page 376

    Clock setting procedure 1. Push and hold the time button until the hours blink. 2. Adjust the hours by turning the right side tune/ scroll control knob. 3. After adjusting the hours, push the right side tune/ scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minu...

  • Page 377

    Setting the tone, balance and fade push the rotary tune/scroll control knob and bass will display. Turn the tune/scroll control knob to the right or left to increase or decrease the bass tones. Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control ...

  • Page 378

    Toggle the music type button to select the following format types: program type 16-digit character display no program type or un- defined none adult hits adlt hit classical classicl classic rock cls rock college college country country foreign language language information inform jazz jazz news news...

  • Page 379

    By pushing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected music type name. The music type function only operates when in the fm mode. If a preset button is activated while in the music type (program type) mode, the ...

  • Page 380

    The set/rnd button twice and set 2 will show in the display window. Each button can be set for set 1 and set 2 in both am and fm. This allows a total of 12 am and 12 fm stations to be stored into pushbutton memory. The stations stored in set 2 memory can be selected by pushing the pushbutton twice. ...

  • Page 381

    If you insert a disc with the ignition on and the radio on, the unit will switch from radio to cd mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Caution! • this cd player will ac...

  • Page 382

    Seek button push the right seek button for the next selection on the cd. Push the left seek button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the first second of the current selection. Pushing and holding the seek but...

  • Page 383

    Supported media (disc types) the mp3 file recording media supported by the radio are cdda, cd-r, cd-rw, mp3, and cdda+mp3. Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded...

  • Page 384

    Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 files. Non-mp3 files named with the *.Mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to co...

  • Page 385

    Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading times for playback of mp3 files may be affected by the following: • med...

  • Page 386

    Info button — cd mode for mp3 play pushing the info button repeatedly will scroll through the following tag information: song title, artist, file name, and folder name (if available). Push the info button once more to return to # elapsed time # priority mode. Push and hold the info button for three ...

  • Page 387

    Sports, news, entertainment, and programming for chil- dren, directly from its satellites and broadcasting studios. Note: sirius service is not available in hawaii and has limited coverage in alaska. System activation sirius satellite radio service is pre-activated, and you may begin listening immed...

  • Page 388

    Selecting uconnect® (satellite) mode push the sat button until # sat # appears in the display. A cd may remain in the radio while in the satellite radio mode. Satellite antenna to ensure optimum reception, do not place items on the roof around the rooftop antenna location. Metal objects placed withi...

  • Page 389

    Scan button pushing the scan button causes the tuner to search for the next channel, pausing for eight seconds before con- tinuing to the next. To stop the search, push the scan button a second time. Info button pushing the info button will cycle the display informa- tion between artist, song title,...

  • Page 390

    Setup button pushing the setup button allows you to select the following items: • display sirius id number — push the audio/ select button to display the sirius id number. This number is used to activate, deactivate, or change the sirius subscription. Set button — to set the pushbutton memory when y...

  • Page 391

    Ipod®/usb/mp3 control — if equipped this feature allows an ipod® or external usb device to be plugged into the usb port, located in the center console. Ipod® control supports mini, 4g, photo, nano, 5g ipod® and iphone® devices. Some ipod® software versions may not fully support the ipod® control fea...

  • Page 392

    External usb device may take a few minutes to connect), the audio device starts charging and is ready for use by pushing radio switches, as described below. Note: if the audio device battery is completely dis- charged, it may not communicate with the ipod®/usb/ mp3 control system until a minimum cha...

  • Page 393

    Mode. In play mode, the following buttons on the radio faceplate may be used to control the ipod® or external usb device and display data: • use the tune control knob to select the next or previous track. • turning it clockwise (forward) by one click, while playing a track, skips to the next track o...

  • Page 394

    • push the scan button to use ipod®/usb/mp3 de- vice scan mode, which will play the first ten seconds of each track in the current list and then forward to the next song. To stop scan mode and start playing the desired track, when it is playing the track, push the scan button again. During scan mode...

  • Page 395

    During all list modes, the ipod® displays all lists in “wrap-around” mode. So if the track is at the bottom of the list, just turn the wheel backward (counterclockwise) to get to the track faster. In list mode, the radio preset buttons are used as shortcuts to the following lists on the ipod® or ext...

  • Page 396

    Caution! • leaving the ipod® or external usb device (or any supported device) anywhere in the vehicle in ex- treme heat or cold can alter the operation or dam- age the device. Follow the device manufacturer’s guidelines. • placing items on the ipod® or external usb device, or connections to the ipod...

  • Page 397

    Play mode when switched to btsa mode, some audio devices can start playing music over the vehicle’s audio system, but some devices require the music to be initiated on the device first, then it will get streamed to the uconnect® phone system. Seven devices can be paired to the uconnect® phone system...

  • Page 398

    Steering wheel audio controls the remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker-type switch with a push-button in the center and controls the volume and mode of the sound system. P...

  • Page 399

    Radio operation pushing the top of the switch will “seek” up for the next listenable station and pushing the bottom of the switch will “seek” down for the next listenable station. The button located in the center of the left-hand control will tune to the next preset station that you have pro- gramme...

  • Page 400

    6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may become too high. Note: if you experience difficulty in playing a particular disc, it may be damaged (e.G., scratched, reflective coat- ing removed, a hair, moisture or dew on the disc) oversized, or have pr...

  • Page 401

    The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emit- ted by wireless devices such as mobile phones. However, the use of wireless radios may be restricted in some situations or environme...

  • Page 402

    By turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • increase the separation between the equipment and receiver. • consult the dealer or an experienced radio technician for help. Climate controls the air conditioni...

  • Page 403

    Blower control rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “o” (off) position. There are seven blower speeds. Temperature control rotate this control to regulate the te...

  • Page 404

    • max a/c for maximum cooling, turn on the a/c and recirculation buttons at the same time. • economy mode if economy mode is desired, push the a/c button to turn off the indicator light and the a/c compressor. Then, move the temperature control to the desired temperature. Mode control (air direction...

  • Page 405

    Floor air is directed through the floor outlets with a small amount flowing through the defrost and side window demist outlets. Mix air is directed through the floor, defrost, and side window demist outlets. This setting works best in cold or snowy conditions that require extra heat to the windshiel...

  • Page 406

    • the use of the recirculation mode in cold or damp weather will cause windows to fog on the inside, because of moisture buildup inside the vehicle. Select the outside air position for maximum defogging. • the a/c will engage automatically to prevent fogging when the recirculation button is pushed a...

  • Page 407

    Automatic operation the automatic temperature control system automati- cally maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger. Operation of the system is quite simple. Turn the mode control knob (on the right) and the blower control knob (on...

  • Page 408

    The recommended setting for maximum comfort is 72° f (22° c) for the average person; however, this may vary. Note: • the temperature setting can be adjusted at anytime without affecting automatic operation. • pushing the air conditioning control button while in auto mode will cause the led in the co...

  • Page 409

    Blower control for full automatic operation or for automatic blower operation, turn the knob to the auto position. In manual mode, there are seven blower speeds that can be individually selected. In off position, the blower will shut off. Manual operation this system offers a full complement of manu...

  • Page 410

    408 understanding your instrument panel.

  • Page 411

    The operator can override the auto mode setting to change airflow distribution by rotating the mode control knob (on the right) to one of the following positions: • panel air is directed through the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow. Note: the center ...

  • Page 412

    • defrost air is directed through the windshield and side window demist outlets. Use this mode with maxi- mum blower and temperature settings for best wind- shield and side window defrosting. • air conditioner control push this button to turn on the air conditioning during manual operation only. Whe...

  • Page 413

    • in cold weather, use of the recirculation mode may lead to excessive window fogging. The recirculation mode is not allowed in the defrost mode in order to improve window clearing. Recirculation will be dis- abled automatically if in defrost mode. • extended use of recirculation may cause the windo...

  • Page 414

    Operating tips note: refer to the chart at the end of this section for suggested control settings for various weather conditions. Summer operation the engine cooling system must be protected with a high-quality antifreeze coolant to provide proper corro- sion protection and to protect against engine...

  • Page 415

    Side window demisters a side window demister outlet is located at each end of the instrument panel. These non-adjustable outlets direct air toward the side windows when the system is in the floor, mix, or defrost mode. The air is directed at the area of the windows through which you view the outside...

  • Page 416

    Control setting suggestions for various weather conditions 414 understanding your instrument panel.

  • Page 417: Starting And Operating

    Starting and operating contents ! Starting procedures . . . . . . . . . . . . . . . .420 ▫ manual transmission — if equipped . . . . . . .420 ▫ automatic transmission — if equipped . . . . .421 ▫ normal starting. . . . . . . . . . . . . . . . . . . . . . .421 ▫ extreme cold weather (below –20°f or −...

  • Page 418

    ! Autostick . . . . . . . . . . . . . . . . . . . . . . . . . .439 ▫ operation . . . . . . . . . . . . . . . . . . . . . . . . . . .439 ! Four–wheel drive operation (command- trac i® or rock-trac®) . . . . . . . . . . . . . .441 ▫ operating instructions/precautions . . . . . . . .441 ▫ shift positio...

  • Page 419

    ! Brake system . . . . . . . . . . . . . . . . . . . . . . .468 ! Electronic brake control system . . . .469 ▫ anti-lock brake system (abs) . . . . . . . . . . . .469 ▫ traction control system (tcs) . . . . . . . . . . . .471 ▫ brake assist system (bas) . . . . . . . . . . . . . . .471 ▫ hill start ...

  • Page 420

    ▫ tread wear indicators . . . . . . . . . . . . . . . . . .507 ▫ life of tire . . . . . . . . . . . . . . . . . . . . . . . . .508 ▫ replacement tires . . . . . . . . . . . . . . . . . . . . .509 ! Tire chains (traction devices) . . . . . . .510 ! Tire rotation recommendations . . . . .512 ! Tire pr...

  • Page 421

    ▫ trailer towing weights (maximum trailer weight ratings) . . . . . . . . . . . . . . . . . . . . . . . . . . . .538 ▫ trailer and tongue weight . . . . . . . . . . . . . .545 ▫ towing requirements . . . . . . . . . . . . . . . . . .546 ▫ towing tips . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 422

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or with access to...

  • Page 423

    The “4wd indicator light” will illuminate when the transfer case has been shifted into this mode. Automatic transmission — if equipped start the vehicle with the shift lever in the park position (vehicle can also be started in neutral). Apply the brake before shifting to any driving range. Normal st...

  • Page 424

    If engine fails to start warning! • never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • do not attempt to push or tow your vehicle to get it started. Vehicles equi...

  • Page 425

    Caution! To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key is released. If this occurs, continue cran...

  • Page 426

    After starting the idle speed is controlled automatically and it will decrease as the engine warms up. Engine block heater — if equipped the engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 volt ac electrical outlet with a groun...

  • Page 427

    Caution! Never drive with your foot resting on the clutch pedal, or attempt to hold the vehicle on a hill with the clutch pedal partially engaged, as this will cause abnormal wear on the clutch. Note: during cold weather, you may experience in- creased effort in shifting until the transmission fluid...

  • Page 428

    Recommended vehicle shift speeds to utilize your manual transmission efficiently for both fuel economy and performance, it should be upshifted as listed in recommended shift speed chart. Shift at the vehicle speeds listed for acceleration. When heavily loaded or pulling a trailer these recommended u...

  • Page 429

    Caution! • skipping gears and downshifting into lower gears at higher vehicle speeds can damage the engine and clutch systems, any attempt to shift into lower gear with clutch pedal depressed may result dam- age to the clutch system. Shifting into lower gear and releasing the clutch may result in en...

  • Page 430

    Manual transmission downshift speeds in mph (km/h) gear selection 6 to 5 5 to 4 4 to 3 3 to 2 2 to 1 maximum speed 80 (129) 70 (113) 50 (81) 30 (48) 15 (24) note: vehicle speeds shown in the chart above are for 2h and 4h only, vehicle speeds in 4l would be signifi- cantly less. Reverse shifting to s...

  • Page 431

    Automatic transmission — if equipped caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into or out of park or reverse only after the vehicle has come to a complete stop. • do not shift between park, reverse, neu- tral, or drive when the engine is ...

  • Page 432

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, turn the engine off, and r...

  • Page 433

    Key ignition park interlock this vehicle is equipped with a key ignition park inter- lock which requires the transmission to be in park before the ignition switch can be turned to the lock/ off (key removal) position. The key can only be re- moved from the ignition when the ignition is in the lock/o...

  • Page 434

    Only shift from drive to park or reverse when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. The transmission shift lever has only park, reverse, neutral, and drive shift positions. Manual shifts can be ma...

  • Page 435

    Gear ranges do not race the engine when shifting from park or neutral into another gear range. Note: • after selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. • if there is a need to restart the eng...

  • Page 436

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • your vehicle could move and injure you and others if it is not in park. Check by trying to move the shif...

  • Page 437

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, turn the engine off, and r...

  • Page 438

    Caution! • before moving the shift lever out of park, you must turn the ignition switch from the lock/off position to the on/run position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • do not race the engine when shifting from park or neutral into another gear ...

  • Page 439

    Warning! Do not coast in neutral and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. Caution! Towing the vehicle, coasting, or driving for any oth...

  • Page 440

    Transmission limp home mode transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, transmission limp home mode is activated. In this mode, the transmission remains in the current gear until the vehicle is brough...

  • Page 441

    Overdrive operation the automatic transmission includes an electronically controlled overdrive (fifth gear). The transmission will automatically shift into overdrive if the following con- ditions are present: • the shift lever is in the drive position. • vehicle speed is sufficiently high. • the dri...

  • Page 442

    Result. It will remain in the selected gear until another upshift or downshift is chosen, except as described below. • the transmission will automatically upshift when nec- essary to prevent engine over-speed. • heavily pressing the accelerator pedal will generate an automatic downshift (for improve...

  • Page 443

    Warning! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. Four–wheel drive operation (command- trac i® or rock-trac®) warning! Failure to engage a transfer case position co...

  • Page 444

    The transfer case is intended to be driven in the 2h position for normal street and highway conditions such as hard-surfaced roads. In the event that additional traction is required, the transfer case 4h and 4l positions can be used to lock the front and rear driveshafts together, forcing the front ...

  • Page 445

    When operating your vehicle in 4l, the engine speed will be approximately three times (four times for rubicon models) that of the 2h or 4h positions at a given road speed. Take care not to overspeed the engine. Proper operation of four-wheel drive vehicles depends on tires of equal size, type, and c...

  • Page 446

    4h position this range locks the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed. This range (4h) provides additional traction for loose, slippery road surfaces and should not be used on dry pavement. The “4wd indicator light” (located in the instru...

  • Page 447

    Shifting procedure 2h to 4h or 4h to 2h shifting between 2h and 4h can be made with the vehicle stopped or in motion. With the vehicle in motion, the transfer case will engage/disengage faster if you momentarily release the accelerator pedal after complet- ing the shift. Apply a constant force when ...

  • Page 448

    Trac-lok® rear axle — if equipped the trac-lok® rear axle provides a constant driving force to both rear wheels and reduces wheel spin caused by the loss of traction at one driving wheel. If traction differs between the two rear wheels, the differential automati- cally proportions the usable torque ...

  • Page 449

    This feature will only activate when the following con- ditions are met: • key in ignition, vehicle in 4l (low) range. • vehicle speed should be 10 mph (16 km/h) or less. To activate the system, press the bottom of the axle lock switch once to lock the rear axle only (the “rear axle lock indicator l...

  • Page 450

    Press the sway bar switch to activate the system. Press the switch again to deactivate the system. The “sway bar indicator light” (located in the instrument cluster) will illuminate when the bar is disconnected. The “sway bar indicator light” will flash during activation transition, or when activati...

  • Page 451

    To disconnect the stabilizer/sway bar, shift to either 4h or 4l and press the sway bar switch to obtain the off-road position. Refer to “four-wheel drive operation” in “starting and operating” for further information. The “sway bar indicator light” will flash until the stabilizer/ sway bar has been ...

  • Page 452

    An advantage of the higher ground clearance is a better view of the road, allowing you to anticipate problems. They are not designed for cornering at the same speeds as conventional two-wheel drive vehicles any more than low-slung sports cars are designed to perform satisfacto- rily in off-road cond...

  • Page 453

    2. Remove one bolt from the underside of the vehicle. 3. Remove the side step assembly. The basics of off-road driving you will encounter many types of terrain driving off- road. You should be familiar with the terrain and area before proceeding. There are many types of surface conditions: hard-pack...

  • Page 454

    Caution! Never park your vehicle over dry grass or other combustible materials. The heat from your vehicle exhaust system could cause a fire. Warning! Always wear your seat belt and firmly tie down cargo. Unsecured cargo can become projectiles in an off-road situation. When to use 4l (low) range whe...

  • Page 455

    Driving in snow, mud and sand snow in heavy snow or for additional control and traction at slower speeds, shift the transmission into a low gear and the transfer case into 4l (low) if necessary. Do not shift to a lower gear than necessary to maintain headway. Over- revving the engine can spin the wh...

  • Page 456

    Key to driving in soft sand is using the appropriate tire pressure, accelerating slowly, avoiding abrupt maneu- vers and maintaining the vehicle’s momentum. If you are going to be driving on large soft sandy areas or dunes, reduce your tire pressure to a minimum of 15 psi (103 kpa) to allow for a gr...

  • Page 457

    Using a spotter there are many times where it is hard to see the obstacle or determine the correct path. Determining the correct path can be extremely difficult when you are confronting many obstacles. In these cases have someone guide you over, through, or around the obstacle. Have the person stand...

  • Page 458

    You should now be able to drive out following the trench you just created at a 45-degree angle. Warning! There is an increased risk of rollover when crossing an obstacle, at any angle, with steep sides. Crossing logs to cross a log, approach it at a slight angle (approxi- mately 10 to 15 degrees). T...

  • Page 459

    Caution! Winching or rocking the vehicle off hard objects increases the risk of underbody damage. Hill climbing hill climbing requires good judgment and a good under- standing of your abilities and your vehicle’s limitations. Hills can cause serious problems. Some are just too steep to climb and sho...

  • Page 460

    And maintain headway by turning the steering wheel no more than a 1/4 turn quickly back and forth. This will provide a fresh # bite # into the surface and will usually provide enough traction to complete the climb. If you do not make it to the top, place the vehicle in reverse and back straight down...

  • Page 461

    Driving across an incline if at all possible, avoid driving across an incline. If it is necessary, know your vehicle’s abilities. Driving across an incline places more weight on the downhill wheels, which increases the possibilities of a downhill slide or rollover. Make sure the surface has good tra...

  • Page 462

    Driving through water extreme care should be taken crossing any type of water. Water crossings should be avoided, if possible, and only be attempted when necessary in a safe, responsible manner. You should only drive through areas which are designated and approved. You should tread lightly and avoid...

  • Page 463

    Before you cross any type of water as you approach any type of water, you need to deter- mine if you can cross it safely and responsibly. If neces- sary, get out and walk through the water or probe it with a stick. You need to be sure of its depth, approach angle, current and bottom condition. Be ca...

  • Page 464

    Crossing ditches, streams, shallow rivers or other flowing water flowing water can be extremely dangerous. Never at- tempt to cross a fast running stream or river even in shallow water. Fast moving water can easily push your vehicle downstream, sweeping it out of control. Even in very shallow water,...

  • Page 465

    • inspect the radiator for mud and debris and clean as required. • check threaded fasteners for looseness, particularly on the chassis, drivetrain components, steering, and sus- pension. Retighten them, if required, and torque to the values specified in the service manual. • check for accumulations ...

  • Page 466

    Power steering the standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible t...

  • Page 467

    Power steering fluid check checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection efforts through an aut...

  • Page 468

    Parking brake before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave an automatic transmission in park, or manual transmission in reverse or first gear. The parking brake lever is located in the center console. To apply the parking brake, pull the le...

  • Page 469

    Note: • when the parking brake is applied and the automatic transmission is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • this light only shows that ...

  • Page 470

    Warning! (continued) • do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. • be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a ...

  • Page 471

    In the event power assist is lost for any reason (for example, repeated brake applications with the engine off) the brakes will still function. The effort required to brake the vehicle will be much greater than that required with the power system operating. Electronic brake control system your vehic...

  • Page 472

    The anti-lock brake system conducts a low speed self- test at about 12 mph (20 km/h). If for any reason your foot is on the brake when the vehicle reaches 12 mph (20 km/h), this check will be delayed until 25 mph (40 km/h). The anti-lock brake system pump motor runs during the self-test, and during ...

  • Page 473

    Caution! The anti-lock brake system is subject to possible detrimental effects of electronic interference caused by improperly installed aftermarket radios or tele- phones. Note: during severe braking conditions, a pulsing sen- sation may occur and a clicking noise will be heard. This is normal, ind...

  • Page 474

    Quickly results in the best bas assistance. To receive the benefit of the system, you must apply continuous brak- ing pressure during the stopping sequence. Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released, the bas is deactivated. Warning! The ...

  • Page 475

    Warning! (continued) another vehicle or object. To avoid this, do not apply throttle while pressing the clutch pedal until you are ready to release the clutch. Always remember the driver is responsible for braking the vehicle. Hsa activation criteria the following criteria must be met in order for h...

  • Page 476

    Hsa on manual transmission vehicles the system will work in reverse, forward gears, and neutral on manual transmission equipped vehicles. The system does not recognize neutral on manual vehicles, thus it will hold the vehicle on an incline for a short period while in neutral, regardless of clutch po...

  • Page 477

    Warning! (continued) • failure to follow these warnings may cause the vehicle to roll down the incline and could collide with another vehicle, object or person, and cause serious or fatal injury. Always remember to use the parking brake while parking on a hill and that the driver is responsible for ...

  • Page 478

    7. If the sequence was completed properly, the “esc activation/malfunction indicator light” will blink several times to confirm hsa is off. Steps 1-7 must be completed within 90 seconds to turn off hsa. Repeat steps 1-7 to re-enable hsa functionality. Electronic roll mitigation (erm) this system ant...

  • Page 479

    Warning! (continued) capabilities of an erm-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others. Electronic stability control (esc) this system enhances directional control and stability of the vehicle under vari...

  • Page 480

    Warning! Electronic stability control (esc) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. Esc cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slipper...

  • Page 481

    This mode is intended to be used if the vehicle is in deep snow, sand, or gravel conditions and more wheel spin than esc would normally allow is required to gain traction. To turn esc on again, momentarily press the esc off switch. This will restore the normal “esc on” mode of operation. Note: to im...

  • Page 482

    In the # esc full off # mode, the engine torque reduction and stability features are disabled. Therefore, the en- hanced vehicle stability offered by esc is unavailable. In an emergency evasive maneuver, the esc system will not engage to assist in maintaining stability. “esc full off” mode is intend...

  • Page 483

    Warning! (continued) maneuver, the esc and erm systems will not engage to assist in maintaining stability. The % esc full off % mode is intended for off-road use only. 4l range (4wd models) esc full off this is the normal operating mode for esc in 4l range. Whenever the vehicle is started in 4l rang...

  • Page 484

    Warning! (continued) maneuver, the esc and erm systems will not engage to assist in maintaining stability. The % esc full off % mode is intended for off-road use only. 2h range (4wd models) or 2wd models esc on this is the normal operating mode for esc in 2h range and on 2wd vehicles. Esc partial of...

  • Page 485

    Warning! • when in “partial off” mode, the tcs functionality of esc, (except for the limited slip feature de- scribed in the tcs section), has been disabled and the “esc off indicator light” will be illuminated. When in “partial off” mode, the engine power reduction feature of tcs is disabled, and t...

  • Page 486

    Note: • the “esc off indicator light” and the “esc activation/malfunction indicator light” come on mo- mentarily each time the ignition switch is turned to the on/run position. • each time the ignition is cycled to the on/run position, the esc system will be on even if it was cycled off previously, ...

  • Page 487

    Warning! If tsc activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway. Hill descent control (hdc) — if equipped hdc is only intended for low speed off-road driving. Hdc maintains vehicle speed while descending hills i...

  • Page 488

    However, the driver can override hdc operation by applying the brake to slow the vehicle down below the hdc control speed. If more speed is desired during hdc control, the accelerator pedal will increase vehicle speed in the usual manner. When either the brake or the accelerator is released, hdc wil...

  • Page 489

    Tire safety information tire markings note: • p (passenger) — metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european — metric tire sizing is based on european design stand...

  • Page 490

    • temporary spare tires are designed for temporary emergency use only. Temporary high pressure com- pact spare tires have the letter “t” or “s” molded into the sidewall preceding the size designation. Example: t145/80d18 103m. • high flotation tire sizing is based on u.S. Design standards and it beg...

  • Page 491

    Example: r = construction code – # r # means radial construction, or – # d # means diagonal or bias construction 15, 16, 18 = rim diameter in inches (in) service description: 95 = load index – a numerical code associated with the maximum load a tire can carry h = speed symbol – a symbol indicating t...

  • Page 492

    Example: load identification: absence of the following load identification symbols on the sidewall of the tire indicates a standard load (sl) tire: • xl = extra load (or reinforced) tire, or • ll = light load tire or • c, d, e, f, g = load range associated with the maximum load a tire can carry at a...

  • Page 493

    Example: dot ma l9 abcd 0301 dot = department of transportation – this symbol certifies that the tire is in compliance with the u.S. Department of transportation tire safety standards and is approved for highway use ma = code representing the tire manufacturing location (two digits) l9 = code repres...

  • Page 494

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours,...

  • Page 495

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Example tire placard location (door) 5 starting and operating 493.

  • Page 496

    Tire and loading information placard this placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. Example tire placard location (b-pillar) tire and loading information placard 494 starting and operating.

  • Page 497

    3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to t...

  • Page 498

    4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “xxx” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 ...

  • Page 499

    5 starting and operating 497.

  • Page 500

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 501

    Warning! (continued) • unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Both under-inflation and over-inflation affect the stability of the v...

  • Page 502

    Tire inflation pressures the proper cold tire inflation pressure is listed on the driver’s side b-pillar or rear edge of the driver’s side door. At least once a month: • check and adjust tire pressure with a good quality pocket-type pressure gauge. Do not make a visual judgement when determining pro...

  • Page 503

    Inflation pressure should be increased by 3 psi (21 kpa), which equals 1 psi (7 kpa) for every 12°f (7°c) for this outside temperature condition. Tire pressure may increase from 2 to 6 psi (13 to 40 kpa) during operation. Do not reduce this normal pressure build up or your tire pressure will be too ...

  • Page 504

    Tire repair if your tire becomes damaged, it may be repaired if it meets the following criteria: • the tire has not been driven on when flat. • the damage is only on the tread section of your tire (sidewall damage is not repairable). • the puncture is no greater than ¼ # (6 mm). Consult an authorize...

  • Page 505

    Summer tires do not contain the all season designation or mountain/snowflake symbol on the tire sidewall. Use summer tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Warning! Do not use summer tires in snow/ice conditions. You could lose vehi...

  • Page 506

    While studded tires improve performance on ice, skid and traction capability on wet or dry surfaces may be poorer than that of non-studded tires. Some states pro- hibit studded tires; therefore, local laws should be checked before using these tire types. Run flat tires — if equipped run flat tires a...

  • Page 507

    Spare tire matching original equipped tire and wheel — if equipped your vehicle may be equipped with a spare tire and wheel equivalent in look and function to the original equipment tire and wheel found on the front or rear axle of your vehicle. This spare tire may be used in the tire rotation for y...

  • Page 508

    Warning! (continued) replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control. Full size spare — if equipped the full size spare is for temporary emergency use only. This tire may look like the originally equ...

  • Page 509

    Warning! (continued) inflated to the cold tire inflation pressures listed on your tire and loading information placard located on the driver’s side b-pillar or the rear edge of the driver’s side door. Replace (or repair) the original equipment tire at the first opportunity and reinstall it on your v...

  • Page 510

    These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16” (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer to “replacement tires” in this section for further information. Life of tire ...

  • Page 511

    Warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place with...

  • Page 512

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 513

    • install on rear tires only. • p225/75r16 or a p235/65r17 tire with the use of a traction device that meets the sae type “class s” specification is recommended. Warning! Using tires of different size and type (m+s, snow) between front and rear axles can cause unpredictable handling. You could lose ...

  • Page 514

    Caution! (continued) • observe the traction device manufacturer’s instruc- tions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer’s if it is less than 30 mph (48 km/h). • do not use traction devices on a com...

  • Page 515

    Caution! Proper operation of four-wheel drive vehicles de- pends on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Tire rotation schedule should be followed to balance tire wear. Tire pressure monitor system (tpms) the ti...

  • Page 516

    Three hours, or driven less than 1 mile (1.6 km) after a three-hour period. Refer to “tires – general informa- tion” in “starting and operating” for information on how to properly inflate the vehicle’s tires. The tire pressure will also increase as the vehicle is driven; this is normal and there sho...

  • Page 517

    Pressure is sufficiently low enough to turn on the “tire pressure monitoring telltale light.” driving the vehicle may cause the tire pressure to rise to approximately 30 psi (207 kpa), but the “tire pressure monitoring telltale light” will still be on. In this situation, the “tire pressure monitorin...

  • Page 518

    Caution! (continued) • after inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the tire pressure moni- toring sensor. Note: • the tpms is not intended to replace normal tire care and ma...

  • Page 519

    Base tpm system the tire pressure monitor system (tpms) uses wireless technology with wheel rim-mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the receiver module. Note: it is particularly impor...

  • Page 520

    The “tire pressure monitoring telltale light” will flash on and off for 75 seconds, and will remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. The “tire pressur...

  • Page 521

    Note: • if your vehicle is equipped with a matching full-size spare wheel and tire assembly, it has a tire pressure monitoring sensor, and can be monitored by the tire pressure monitoring system (tpms). In the event that the matching full-size spare tire is swapped with a low pressure road tire, the...

  • Page 522

    Premium system — if equipped the tire pressure monitor system (tpms) uses wireless technology with wheel rim-mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the receiver module. Note: it is parti...

  • Page 523

    Tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illuminate in the instrument cluster, and an au- dible chime will be activated, when one or more of the four active road tire pressures are low. In addition, the evic will display a “low tire” message for...

  • Page 524

    The pressure value(s) will stop “flashing,” and the tire pressure monitoring telltale light will extinguish once the updated tire pressure(s) have been received. Note: when filling warm tires, the tire pressure may need to be increased up to an additional 4 psi (30 kpa) above the recommended cold pl...

  • Page 525

    The evic will also display a # service tpm system # message for a minimum of five seconds when a system fault is detected possibly related to an incorrect sensor location fault. In this case, the # service tpm system # message is then followed by a graphic display, with pressure values still shown. ...

  • Page 526

    • if your vehicle is not equipped with a matching full-size spare wheel and tire assembly, it does not have a tire pressure monitoring sensor in the spare tire. The tpms will not be able to monitor the tire pressure. If you install the spare tire in place of a road tire that has a pressure below the...

  • Page 527

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept any interference received, including interference that may cause undesi...

  • Page 528

    Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the world- wide fuel charter, wwfc) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recom- mends the use of gasolines...

  • Page 529

    E-85 usage in non-flex fuel vehicles non-flex fuel vehicles (ffv) are compatible with gaso- line containing 10% ethanol (e10). Gasoline with higher ethanol content may void the new vehicle limited warranty. If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have some or all...

  • Page 530

    Therefore, you should ask your gasoline retailer whether the gasoline contains mmt. Mmt is prohibited in federal and california reformulated gasoline. Materials added to fuel all gasoline sold in the united states is required to contain effective detergent additives. Use of additional detergents or ...

  • Page 531

    Note: intentional tampering with the emissions control system can result in civil penalties being assessed against you. Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: (continued) warning! (continue...

  • Page 532

    Adding fuel fuel filler cap (gas cap) the gas cap is located on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Caution! • damage to the fuel system or emission control system could result from using an improper fu...

  • Page 533

    Warning! (continued) • never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the mil to turn on. • a fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas...

  • Page 534

    Vehicle loading certification label as required by national highway traffic safety admin- istration regulations, your vehicle has a certification label affixed to the driver’s side door or pillar. This label contains the month and year of manufacture, gross vehicle weight rating (gvwr), gross axle w...

  • Page 535

    Tire size the tire size on the vehicle certification label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Rim size this is the rim size that is appropriate for the tire size listed. Inflation pressure this is the cold tire inf...

  • Page 536

    Improper weight distributions can have an adverse effect on the way your vehicle steers and handles and the way the brakes operate. Caution! Do not load your vehicle any heavier than the gvwr or the maximum front and rear gawr. If you do, parts on your vehicle can break, or it can change the way you...

  • Page 537

    Ready for operation # condition. The recommended way to measure gtw is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale. Gross combination weight rating (gcwr) the gcwr is the total permissible weight of your vehicle and trailer whe...

  • Page 538

    Trailer sway control – if equipped the trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue. It typically provides adjustable friction associ- ated with the telescoping motion to dampen any un- wanted trailer swaying motions while traveli...

  • Page 539

    Warning! (continued) • weight distributing systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable rec- reational vehicle dealer for additional information. Trailer hitch classification the following chart provides the industry stand...

  • Page 540

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ transmission axle model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6...

  • Page 541

    Engine/ transmission axle model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l/ automatic 3.73 two–door sport model (4wd) 6,340 lbs (2 876 kg) 25 sq ft (2.32 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) 3.6l/manual 3.21 two–door sahara ...

  • Page 542

    Engine/ transmission axle model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l/ automatic 3.21 two–door sahara model (4wd) 6,383 lbs (2 895 kg) 25 sq ft (2.32 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) 3.6l/ automatic 3.73 two–door sa...

  • Page 543

    Engine/ transmission axle model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l/ automatic 3.73 two–door rubicon model (4wd) 6,473 lbs (2 936 kg) 25 sq ft (2.32 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) 3.6l/ automatic 4.10 two–door r...

  • Page 544

    Engine/ transmission axle model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l/ automatic 3.21 four–door sport model (4wd) 6,780 lbs (3 075 kg) 32 sq ft (2.97 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) 3.6l/ automatic 3.73 four–door s...

  • Page 545

    Engine/ transmission axle model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l/ automatic 3.21 four–door sahara model (4wd) 6,728 lbs (3 052 kg) 32 sq ft (2.97 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) 3.6l/ automatic 3.73 four–door ...

  • Page 546

    Engine/ transmission axle model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l/ automatic 3.73 four–door rubicon model (4wd) 8,355 lbs (3 790 kg) 32 sq ft (2.97 sq m) 3,500 lbs (1 587 kg) 350 lbs (159 kg) 3.6l/ automatic 4.10 four–d...

  • Page 547

    Note: the trailer tongue weight must be considered as part of the combined weight of occupants and cargo (ie. The gvwr), and the gvwr should never exceed the weight referenced on the tire and loading information placard. Refer to “tire safety information” in “starting and operating” for further info...

  • Page 548

    Note: remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “tire and loading information” placard for the maximum combine...

  • Page 549

    Warning! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may ...

  • Page 550

    Warning! (continued) • total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. Gvwr 2. Gtw 3. Gawr 4. Tongue weight rating for the trailer hitch uti- lized. Towing requirements — tires • proper tire inflation pressures are es...

  • Page 551

    • an electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. • trailer brakes are recommended for trailers over...

  • Page 552

    Towing requirements — trailer lights and wiring whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. The trailer tow package will include a four–pin wiring harness. Use a factory-approved trailer harness and connec...

  • Page 553

    Towing tips before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in first gear to avoid excessive clutch slippage. Automatic transmission — if equipped the dr...

  • Page 554

    • to prevent excess heat generation, avoid continuous driving at high rpm. Reduce vehicle speed as neces- sary to avoid extended driving at high rpm. Return to a higher gear or vehicle speed when grade and road conditions allow. Electronic speed control — if equipped • do not use in hilly terrain or...

  • Page 555

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheels off the ground four-wheel drive models flat tow none see instructions • automatic transmission in park • manual transmission in gear (not in neutral [n]) • transfer case in neutral (n) • t...

  • Page 556

    Recreational towing — four-wheel drive models note: the transfer case must be shifted into neutral (n), automatic transmission must be shifted into park, and manual transmission must be placed in gear (not in neutral) for recreational towing. Caution! • do not dolly tow any 4wd vehicle. Towing with ...

  • Page 557

    Shifting into neutral (n) use the following procedure to prepare your vehicle for recreational towing. Warning! You or others could be injured or killed if you leave the vehicle unattended with the transfer case in the neutral (n) position without first fully engaging the parking brake. The transfer...

  • Page 558

    8. Release the brake pedal (and clutch pedal on manual transmissions) for five seconds and ensure that there is no vehicle movement. 9. Repeat steps 7 and 8 with automatic transmission in drive or manual transmission in first gear. 10. Turn the engine off. 11. Firmly apply the parking brake. 12. Shi...

  • Page 559

    7. Shift the transfer case lever to the desired position. Note: when shifting the transfer case out of neutral (n), the engine should remain off to avoid gear clash. 8. Shift the automatic transmission into park, or place manual transmission in neutral. 9. Release the brake pedal. 10. Disconnect veh...

  • Page 561: Contents

    What to do in emergencies contents ! Hazard warning flashers . . . . . . . . . . .560 ! If your engine overheats . . . . . . . . . . . .560 ! Wheel and tire torque specifications . . . . . . . . . . . . . . . . . . . . . .561 ▫ torque specifications . . . . . . . . . . . . . . . . . . .561 ! Jacking...

  • Page 562

    Hazard warning flashers the hazard warning flasher switch is located on the instrument panel below the climate controls. Press the switch to turn on the hazard warning flasher. When the switch is activated, all direc- tional turn signals will flash on and off to warn oncoming traffic of an emergency...

  • Page 563

    Note: there are steps that you can take to slow down an impending overheat condition: • if your air conditioner (a/c) is on, turn it off. The a/c system adds heat to the engine cooling system and turning the a/c off can help remove this heat. • you can also turn the temperature control to maximum he...

  • Page 564

    Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. Wheel mounting surface torque patterns 562 what to do in emergencies.

  • Page 565

    Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. Jacking and tire changing warning! • do not attempt to change a tire on the side of the vehicle close to...

  • Page 566

    Jack location the jack and lug wrench are located in the rear storage compartment. Note: turn the black plastic wing nut counterclockwise to loosen the jack from the storage bin. Jack storage jack wing nut 564 what to do in emergencies.

  • Page 567

    Spare tire removal to remove the spare tire from the carrier, remove the tire cover, if equipped, and remove the lug nuts with the lug wrench turning them counterclockwise. Note: if you have added aftermarket accessories to the spare tire mounted carrier, it cannot exceed a gross weight of 85 lbs (3...

  • Page 568

    Jacking instructions warning! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • turn on the hazard warning flasher. • block the ...

  • Page 569

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove the spare tire, jack and tools from the stored location. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while...

  • Page 570

    5. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum sta- bility. Warning! Raising the vehicle higher than necessary can make the vehicle ...

  • Page 571

    8. Lower the vehicle by turning the jack screw to the left, and remove the jack. 9. Finish tightening the lug nuts. Push down on the wrench while tightening for increased leverage. Alter- nate nuts until each nut has been tightened twice. Refer to “torque specifications” in this section for correct ...

  • Page 572

    Each nut has been tightened twice. For the correct lug nut torque refer to “torque specifications” in this section. If in doubt about the correct tightness, have them checked with a torque wrench by your autho- rized dealer or service station. 5. After 25 miles (40 km) check the lug nut torque with ...

  • Page 573

    Preparations for jump-start the battery in your vehicle is located in the right rear of the engine compartment, behind the power distribution center. Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injur...

  • Page 574

    3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is off. Warning! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-start...

  • Page 575

    Warning! Do not connect the jumper cable to the negative (-) post of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. Only use the specific ground point, do not use any other exposed metal parts. 5. Start the engine in the...

  • Page 576

    Caution! (continued) the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. Freeing a stuck vehicle if your vehicle becomes stuck in mud, sand or snow, it can often be moved using a rocking motion. Turn the steering wheel right and left to ...

  • Page 577

    Caution! • when “rocking” a stuck vehicle by shifting be- tween drive/2nd gear and reverse, do not spin the wheels faster than 15 mph (24 km/h), or drive- train damage may result. • revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damag...

  • Page 578

    Warning! • do not use a chain for freeing a stuck vehicle. Chains may break, causing serious injury or death. • stand clear of vehicles when pulling with tow hooks. Tow straps may become disengaged, caus- ing serious injury. Caution! Tow hooks are for emergency use only, to rescue a vehicle stranded...

  • Page 579

    5. Press and maintain firm pressure on the brake pedal. 6. Insert the screwdriver or similar tool into the access port, and push and hold the override release lever down. 7. Move the shift lever to the neutral position. 8. The vehicle may then be started in neutral. 9. Reinstall the shift lever over...

  • Page 580

    Towing condition wheels off the ground 4wd models flat tow none see instructions under “recreational towing” • automatic transmission in park • manual transmission in gear ( not in neutral) • transfer case in neutral • tow in forward direction wheel lift or dolly tow front not allowed rear not allow...

  • Page 581

    Caution! • do not use sling type equipment when towing. Vehicle damage may occur. • when securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. Without the ignition key special care must be taken when the...

  • Page 582

    Caution! • front or rear wheel lifts must not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when towing. • towing this vehicle in violation of the above re- quirements can cause severe transmission and/or transfer case damage. Damage f...

  • Page 583: Maintaining Your Vehicle

    Maintaining your vehicle contents ! Engine compartment — 3.6l . . . . . . . . . .583 ! Onboard diagnostic system — obd ii . . .584 ▫ loose fuel filler cap message . . . . . . . . . . . .584 ! Emissions inspection and maintenance programs . . . . . . . . . . . . . . . . . . . . . . . . . .585 ! Repla...

  • Page 584

    ▫ automatic transmission — if equipped . . . . .619 ▫ clutch hydraulic system (manual transmission) — if equipped . . . . . . . . . . . . . . . . . . . . . . .623 ▫ manual transmission — if equipped . . . . . . .623 ▫ transfer case . . . . . . . . . . . . . . . . . . . . . . . .624 ▫ front/rear axle...

  • Page 585

    Engine compartment — 3.6l 1 — integrated power module (fuses) 7 — washer fluid reservoir 2 — battery 8 — engine coolant reservoir 3 — engine oil dipstick 9 — air cleaner filter 4 — automatic transmission dipstick (under engine cover) 10 — coolant pressure cap 5 — engine oil fill 11 — power steering ...

  • Page 586

    Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 587

    The message will appear the next time the vehicle is started. This might indicate a damaged cap. If the prob- lem is detected twice in a row, the system will turn on the mil. Resolving the problem will turn the mil off. Emissions inspection and maintenance programs in some localities, it may be a le...

  • Page 588

    3. Approximately 15 seconds later, one of two things will happen: • the mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m ...

  • Page 589

    Available which include detailed service information for your vehicle. Refer to these service manuals before attempting any procedure yourself. Note: intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. Warning! Y...

  • Page 590

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance inter- vals. Do not use chemical flushes in these compo- nents as the chemicals can damage your engine, transmission, power steering...

  • Page 591

    Change engine oil the oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “maintenance schedule” for further informa- tion. Note: under no circumstances should oil change in- tervals exceed 10,000 miles (16,000 km) or twelve mon...

  • Page 592

    Engine oil viscosity — 3.6l engine mopar® sae 5w-20 engine oil approved to chrysler material standard ms-6395 such as pennzoil®, shell helix® or equivalent is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler...

  • Page 593

    Engine oil filter the engine oil filter should be replaced with a new filter at every engine oil change. Engine oil filter selection this manufacturer’s engines have a full-flow type oil filter. Use a filter of this type for replacement. The quality of replacement filters varies considerably. Only h...

  • Page 594

    Engine air cleaner filter inspection and replacement — gasoline engine follow the recommended maintenance intervals as shown in the maintenance schedule. Engine air cleaner filter removal 1. Remove the bolts from the air cleaner intake tube. 2. Remove air hose and loosen clean air hose clamp then re...

  • Page 595

    3. Lift the air cleaner cover to access the air cleaner filter. Air cleaner filter cover 1 — spring clips 2 — air hose 3 — clean air hose clamp air cleaner air hose 1 — air filter cleaner cover 2 — air hose 3 — clean air intake tube 4 — clean air hose clamp 5 — air cleaner filter 7 maintaining your ...

  • Page 596

    4. Remove the air cleaner filter element from the housing assembly. Engine air cleaner filter installation note: inspect and clean the housing if dirt or debris is present before replacing the air filter element. 1. Install the air cleaner filter element into the housing assembly with the air cleane...

  • Page 597

    Accessory drive belt inspection warning! • do not attempt to inspect an accessory drive belt with vehicle running. • when working near the radiator cooling fan, dis- connect the fan motor lead. The fan is temperature controlled and can start at any time regardless of ignition switch position. You co...

  • Page 598

    Conditions that would require replacement: • rib chunking (one or more ribs has separated from belt body) • rib or belt wear • longitudinal belt cracking (cracks between two ribs) • belt slips • “groove jumping # (belt does not maintain correct position on pulley) • belt broken (note: identify and c...

  • Page 599

    Warning! • battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water. R...

  • Page 600

    Air conditioner maintenance for best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at thi...

  • Page 601

    Refrigerant recovery and recycling r134a — if equipped r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency and is an ozone-saving product. How- ever, the manufacturer recommends that air conditioning service be performed by autho...

  • Page 602

    3. Pivot the glove compartment downward. 4. Disengage the two retaining tabs that secure the two air filter access doors to the hvac housing. 1 — left retaining tab 2 — right retaining tab 5. Open the two air filter access doors. 6. Remove the two particulate air filters from the hvac air inlet hous...

  • Page 603

    7. Install the a/c air filter with the air filter position indicators pointing in the same direction as removal. Caution! The a/c air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more...

  • Page 604

    Operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure pro...

  • Page 605

    • foreign material • hardening or cracking • deformation or fatigue if a wiper blade or wiper arm is damaged, replace the affected wiper arm or blade with a new unit. Do not attempt to repair a wiper arm or blade that is damaged. Wiper blade removal/installation caution! Do not allow the wiper arm t...

  • Page 606

    2. To disengage the wiper blade from the wiper arm, press the release tab on the wiper blade and while holding the wiper arm with one hand, slide the wiper blade down towards the base of the wiper arm. 3. With the wiper blade disengaged, remove the wiper blade from the wiper arm. Wiper blade with re...

  • Page 607

    4. Gently lower the wiper arm onto the glass. Installing the front wipers 1. Lift the wiper arm off of the glass, until the wiper arm is in the full up position. 2. Position the wiper blade near the hook on the tip of the wiper arm. 3. Insert the hook on the tip of the arm through the opening in the...

  • Page 608

    2. Remove the wiper arm nut and gently rock the wiper arm while pulling towards you to remove wiper arm from the stud. Rear wiper assembly 1 — wiper arm pivot cap 2 — wiper arm 3 — wiper blade wiper arm with pivot cap removed 1 — wiper arm pivot cap 2 — wiper arm nut 3 — wiper arm 606 maintaining yo...

  • Page 609

    3. To remove the wiper blade from the wiper arm, grasp the wiper blade nearest to wiper arm with your right hand. With your left hand hold the wiper arm as you pull the wiper blade away from the wiper arm past its stop far enough to unsnap the wiper blade pivot pin from the receptacle on the end of ...

  • Page 610

    Installing the rear wiper 1. Insert the wiper blade pivot pin into the opening on the end of the wiper arm. Grab the bottom end of the wiper arm with one hand, and press the wiper blade flush with the wiper arm until it snaps into place. 2. Install wiper assembly back on the wiper stud at it’s origi...

  • Page 611

    Some washer fluid and apply it to a cloth or towel and wipe clean the wiper blades; this will help blade perfor- mance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating informa...

  • Page 612

    Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, refer to “safety tips/exhaust gas” in “things to know before starting your vehicle” for further...

  • Page 613

    Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. Note: intentional tampering with emissions control systems can result in c...

  • Page 614

    Engine coolant checks check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh engine coolant (anti- fre...

  • Page 615

    Selection of coolant refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Caution! • mixing of engine coolant (antifreeze) other than specified organic additive technology (oat) en- gine coolant (antifreeze), may result in engine damage and may decr...

  • Page 616

    Adding coolant your vehicle has been built with an improved engine coolant (oat coolant conforming to ms-12106) that allows extended maintenance intervals. This engine cool- ant (antifreeze) can be used up to ten years or 150,000 miles (240,000 km) before replacement. To prevent reduc- ing this exte...

  • Page 617

    Note: • some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized dealer. • mixing engine coolant (antifreeze) types is not r...

  • Page 618

    Disposal of used engine coolant used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by ani- mals or children, do not store ethylene glycol...

  • Page 619

    If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • do not overfill the coolant expansion bottle. • check the coolant freeze point in the radiator and in the coolant expansion bottle. If engine c...

  • Page 620

    Warning! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency...

  • Page 621

    Warning! (continued) • to avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lowe...

  • Page 622

    Note: no chemical flushes should be used in any transmission; only the approved lubricant should be used. Caution! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder, and will require more...

  • Page 623

    Of driving. At normal operating temperature, the fluid cannot be held comfortably between the fingertips. Use the following procedure to check the transmission fluid level properly: 1. Park the vehicle on level ground. 2. Remove the engine cover by pulling it up off the mounting studs (two in the fr...

  • Page 624

    Note: • the holes in the dipstick will be full of fluid if the actual level is at or above the hole. • if it is necessary to check the transmission below the operating temperature, the fluid level should be between the two cold (lower) holes on the dipstick with the fluid at approximately 80° f (27°...

  • Page 625

    In addition, change the fluid and filter if the fluid becomes contaminated (with water, etc.), or if the trans- mission is disassembled for any reason. Clutch hydraulic system (manual transmission) — if equipped the clutch hydraulic system is fed by a segregated volume of fluid within the brake syst...

  • Page 626

    Transfer case fluid level check the fluid level should be to the bottom edge of the fill hole (a) when the vehicle is in a level position. Adding fluid fluid should be added only at filler hole until fluid begins to run out of the hole. Drain first remove the fill plug (b), then the drain plug (c). ...

  • Page 627

    Front/rear axle fluid for normal service, periodic fluid level checks are not required. When the vehicle is serviced for other reasons the exterior surfaces of the axle assembly should be inspected. If gear oil leakage is suspected inspect the fluid level. Refer to “fluids, lubricants, and genuine p...

  • Page 628

    What causes corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • road salt, dirt and moisture accumulation. • stone and gravel impact. • insects, tree sap and tar. • salt in the air near seacoast localities. ...

  • Page 629

    Special care • if you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • it is important that the drain holes in the lower edges of the doors, rocker panels, and trunk be kept clear and open. • if you detect any stone chips or scratches...

  • Page 630

    Note: if your vehicle is equipped with dark vapor or black satin chrome wheels do not use wheel cleaners, abrasives or polishing compounds. They will perma- nently damage this finish and such damage is not cov- ered by the new vehicle limited warranty. Use only mild soap and water with a soft cloth....

  • Page 631

    Caution! When installing hanging air fresheners in your ve- hicle, read the installation instructions carefully. Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface. Glass surfaces all glass surfaces should be cleaned on a regular basis...

  • Page 632

    If the belts need cleaning, use mopar® total clean, a mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them. Dry with a soft cloth. Replace the belts if they appear frayed or worn or if the buckles do not work properly. Warning! A frayed or torn belt could rip ...

  • Page 633

    Washing – use mopar® car wash or equivalent, or mild soap suds, lukewarm water, and a brush with soft bristles. If extra cleaning is required, use mopar® convertible cloth top cleaner or equivalent, or a mild foaming cleaner on the entire top, but support the top from underneath. Rinsing – be sure t...

  • Page 634

    Care of fabric top windows caution! Your vehicle’s fabric top has pliable plastic windows which can be scratched unless special care is taken by following these directions: 1. Never use a dry cloth to remove dust. Instead, use a microfiber towel or soft cotton cloth moistened with cold or warm, clea...

  • Page 635

    The mopar® soft top zipper cleaner and lubricant or equivalent into the zipper slide. Several applications may be required before the zipper comes free. 6. Never paste stickers, gummed labels or any tape to the windows. Adhesives are hard to remove and may damage the windows. Fuses warning! • when r...

  • Page 636

    Totally integrated power module the totally integrated power module is located in the engine compartment near the battery. This center con- tains cartridge fuses, mini fuses and relays. A label that identifies each component is printed on the inside of the cover. Cavity cartridge fuse mini fuse desc...

  • Page 637

    Cavity cartridge fuse mini fuse description j5 25 amp clear – passenger door node j6 40 amp green – anti-lock brake system (abs) pump/ stability control system j7 30 amp pink – anti-lock brake system (abs) valve/ stability control system j8 – – – j9 40 amp green – pzev sec motor/flex fuel j10 30 amp...

  • Page 638

    Cavity cartridge fuse mini fuse description j18 20 amp blue – powertrain control module (pcm) trans range j19 60 amp yellow – radiator fan j20 30 amp pink – front wiper lo/hi j21 20 amp blue – front/rear washer j22 – – spare m1 – 15 amp blue center high-mounted stop light (chmsl)/ switch stop lamp f...

  • Page 639

    Cavity cartridge fuse mini fuse description m10 – 15 amp blue ignition off draw – vehicle entertainment sys- tem, satellite digital audio receiver (sdars), dvd, hands-free module, radio, antenna, universal garage door opener, vanity lamp m11 – 10 amp red (ignition off draw) climate control system, u...

  • Page 640

    Cavity cartridge fuse mini fuse description m16 – 10 amp red airbag module m17 – 15 amp blue left tail/license/park lamp m18 – 15 amp blue right tail/park/run lamp m19 – 25 amp clear auto shut down (asd #1 and #2) m20 – 15 amp blue cabin compartment node interior light, switch bank m21 – 20 amp yell...

  • Page 641

    Cavity cartridge fuse mini fuse description m29 – 10 amp red powertrain m30 – 15 amp blue wiper motor frt, j1962 diagnostic feed m31 – 20 amp yellow backup lamps m32 – 10 amp red airbag controller, tt europe m33 – 10 amp red powertrain controller m34 – 10 amp red park assist, climate control system,...

  • Page 642

    Caution! • when installing the integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the integrated power mod- ule, and possibly result in an electrical system failure. • when replacing a blown fuse, ...

  • Page 643

    Replacement bulbs interior bulbs bulb number automatic transmission indicator lamp 658 heater control lamps (2) 194 rocker switch indicator lamp (rear window defog- ger, and rear wash/wipe) ** soundbar dome lamp 912 ** bulbs only available from authorized dealer. Exterior bulbs bulb number headlamps...

  • Page 644

    Bulb number rear stop/tail/turn lamps (2) 3157 center high-mounted stop lamp l.E.D. Backup lamps (2) 3157 license lamp 194 note: numbers refer to commercial bulb types that can be purchased from your local authorized dealer. If a bulb needs to be replaced, visit your authorized dealer or refer to th...

  • Page 645

    5. Remove the four screws holding the metal retaining ring. 6. Remove the lamp from the collar. 7. Grasp the bulb and turn 1/4 turn counterclockwise. 8. Pull the bulb from the housing. 9. Push connector locking tab to the unlock position. 10. Remove connector from bulb. 11. Push connector onto new b...

  • Page 646

    Front fog lamp 1. Reach under the vehicle to access the back of the front fog lamp. 2. Disconnect the wire harness connector from the front fog lamp connector receptacle. 3. Firmly grasp the bulb by the two latch features and squeeze them together to unlock the bulb from the back of the front fog la...

  • Page 647

    2. Separate the housing from the body by pushing the lamp inboard while pulling the lamp away from the body. 3. Rotate the appropriate socket 1/4 turn counterclock- wise, then remove it from the housing. 4. Pull the bulb straight from the socket to replace. Center high-mounted stop lamp (chmsl) the ...

  • Page 648

    Fluid capacities u.S. Metric fuel (approximate) two door models 18.6 gallons 70 liters four door models 22.5 gallons 85 liters engine oil with filter 3.6l engine 6 quarts 5.6 liters cooling system * 3.6l engine (mopar® antifreeze/ engine coolant 10 year/150,000 mile formula or equivalent) 10.5 quart...

  • Page 649

    Fluids, lubricants and genuine parts engine component fluid, lubricant, or genuine part engine coolant we recommend you use mopar® antifreeze/coolant 10 year/150,000 mile formula oat (organic additive technology) or equivalent meeting the requirements of chrysler material standard ms-12106. Engine o...

  • Page 650

    Caution! • mixing of engine coolant (antifreeze) other than specified organic additive technology (oat) en- gine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic additive technology (oat) engine cool- ant is different and should not be mixed with hybri...

  • Page 651

    Chassis component fluid, lubricant, or genuine part automatic transmission – if equipped use only atf+4® automatic transmission fluid. Fail- ure to use atf+4® fluid may affect the function or performance of your transmission. We recommend mopar® atf+4® fluid. Manual transmission – if equipped we rec...

  • Page 652

    Component fluid, lubricant, or genuine part axle differential (rear) 226 rbi (model 44) – we recommend you use mopar® gear & axle lubricant (sae 80w-90) (api gl-5) or equivalent. For trailer towing, use mopar® synthetic gear & axle lubricant (sae 75w-140). Models equipped with trac-lok™ require an a...

  • Page 653: Maintenance Schedules

    Maintenance schedules contents ! Maintenance schedule . . . . . . . . . . . . .652 ▫ maintenance chart. . . . . . . . . . . . . . . . . . . . .654 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 654

    Maintenance schedule your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This...

  • Page 655

    Once a month or before a long trip: • check engine oil level • check windshield washer fluid level • check the tire inflation pressures and look for unusual wear or damage • check the fluid levels of the coolant reservoir, brake master cylinder, power steering and automatic trans- mission, and fill ...

  • Page 656

    Maintenance chart refer to the maintenance schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 1...

  • Page 657

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000...

  • Page 658

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000...

  • Page 659

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000...

  • Page 660

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000...

  • Page 661

    Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. • failure to properly inspect and m...

  • Page 663: Contents

    If you need consumer assistance contents ! Suggestions for obtaining service for your vehicle . . . . . . . . . . . . . . . . . . . . . . .663 ▫ prepare for the appointment. . . . . . . . . . . . .663 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . . .663 ▫ be reasonable with requests ....

  • Page 664

    ! Department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . .669 ▫ treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .669 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . . .669 ▫ temperature grades. . . . . . . . . . . . . . . . . . . .670 662 if...

  • Page 665

    Suggestions for obtaining service for your vehicle prepare for the appointment if you are having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager....

  • Page 666

    Facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner. This is why you should always talk to an authorized dealer service manager first. Most matters can be re- solved with this process. • if for some reason...

  • Page 667

    In mexico contact: av. Prolongacion paseo de la reforma, 1240 sante fe c.P. 05109 mexico, d. F. In mexico city: 5081-7568 outside mexico city: 1-800-505-1300 customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has insta...

  • Page 668

    The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a ser- vice contract that is not a manufacturer’s service contract, and you req...

  • Page 669

    Mopar® parts mopar® fluids, lubricants, parts, and accessories are available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle operating at its best. Reporting safety defects in the 50 united states and washington, d.C. If you believe that your vehi...

  • Page 670

    Publication order forms to order the following manuals, you may use either the website or the phone numbers listed below. Visa, mas- tercard, american express, and discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. Note: a street address is required wh...

  • Page 671

    Call toll free at: • 1–800–890–4038 (u.S.) • 1–800–387–1143 (canada) or visit us on the worldwide web at: • www.Techauthority.Com department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The...

  • Page 672

    Warning! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistan...

  • Page 673: Index

    Index 10

  • Page 674

    About your brakes . . . . . . . . . . . . . . . . . . . . . . . .468 abs (anti-lock brake system) . . . . . . . . . . . . . . . .309 adding engine coolant (antifreeze) . . . . . . . . . . . .614 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .530 additives, fuel . . . . . . . . ...

  • Page 675

    Auto down power windows . . . . . . . . . . . . . . . . . .45 automatic dimming mirror . . . . . . . . . . . . . . . . . .112 automatic door locks . . . . . . . . . . . . . . . . . . . . . .41 automatic headlights . . . . . . . . . . . . . . . . . . . . . .168 automatic oil change indicator . . . . ...

  • Page 676

    Capacities, fluid . . . . . . . . . . . . . . . . . . . . . . . . . .646 caps, filler fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .530 power steering . . . . . . . . . . . . . . . . . . . . . . . . .465 radiator (coolant pressure) . . . . . . . . . . . . . . . .615 carbon mo...

  • Page 677

    Compact disc (cd) maintenance . . . . . . . . . . . . . .397 compact spare tire . . . . . . . . . . . . . . . . . . . . . . . .505 compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322 compass calibration . . . . . . . . . . . . . . . . . . . . . . .325 compass variance. . . . . ....

  • Page 678

    Dimmer switch, headlight. . . . . . . . . . . . . . . . . . .170 dipsticks oil (engine) . . . . . . . . . . . . . . . . . . . . . . . . . . .588 power steering . . . . . . . . . . . . . . . . . . . . . . . . .465 disabled vehicle towing . . . . . . . . . . . . . . . . . . . .577 disarming, security ...

  • Page 679

    Emission control system maintenance . . . . . . . . . .585 engine air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . .591 block heater . . . . . . . . . . . . . . . . . . . . . . . . . .424 break-in recommendations . . . . . . . . . . . . . . . . .98 compartment . . . . . . . . . . . . ...

  • Page 680

    Flashers hazard warning . . . . . . . . . . . . . . . . . . . . . . . .560 turn signal . . . . . . . . . . . . . . . . . . . . . . . . . . .103 flash-to-pass . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 flooded engine starting . . . . . . . . . . . . . . . . . . . .422 fluid, brake . ....

  • Page 681

    Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .633 gas cap (fuel filler cap) . . . . . . . . . . . . . . . . . . .530 gasoline, clean air . . . . . . . . . . . . . . . . . . . . . . . .526 gasoline (fuel) . . . . . . . . . . . . . . . . . . . . . . . . . . .525 gasoline, re...

  • Page 682

    Heater, engine block . . . . . . . . . . . . . . . . . . . . . . .424 high beam indicator . . . . . . . . . . . . . . . . . . . . . . .309 hill descent control . . . . . . . . . . . . . . . . . . . . . . .485 hill descent control indicator . . . . . . . . . . . . . . . .485 hill start assist. . . . ...

  • Page 683

    Key, sentry (immobilizer) . . . . . . . . . . . . . . . . . . . .16 lane change and turn signals . . . . . . . . . . . . . . . .307 lane change assist. . . . . . . . . . . . . . . . . . . . . . . .169 lap/shoulder belts. . . . . . . . . . . . . . . . . . . . . . . . .51 latches . . . . . . . . . . ....

  • Page 684

    Low fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .306 oil pressure . . . . . . . . . . . . . . . . . . . . . . . . . . .307 passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 rear servicing . . . . . . . . . . . . . . . . . . . . . . . . .644 rear tail lamps . . ....

  • Page 685

    Automatic dimming . . . . . . . . . . . . . . . . . . . . .112 electric powered . . . . . . . . . . . . . . . . . . . . . . . .113 electric remote . . . . . . . . . . . . . . . . . . . . . . . . .113 heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 outside . . . . . . . . . . ...

  • Page 686

    Operator manual (owner’s manual) . . . . . . . . . . . . .6 outside rearview mirrors . . . . . . . . . . . . . . . . . . .112 overdrive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .439 overdrive off switch . . . . . . . . . . . . . . . . . . . . . .439 overheating, engine . . . . . . ...

  • Page 687

    Rear window features . . . . . . . . . . . . . . . . . . . . .297 rear wiper/washer. . . . . . . . . . . . . . . . . . . . . . . .297 recorder, event data . . . . . . . . . . . . . . . . . . . . . . .75 recreational towing . . . . . . . . . . . . . . . . . . . . . . .553 shifting into transfer case ...

  • Page 688

    Automatic locking retractor (alr) . . . . . . . . . . .60 beltalert® . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 disengage the automatic locking mode . . . . . . .63 energy management feature . . . . . . . . . . . . . . . .60 engage the automatic locking mode . . . . . . . . .62 lap/...

  • Page 689

    Security alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 security system . . . . . . . . . . . . . . . . . . . . . . . . . . .20 selection of coolant (antifreeze). . . . . . . . . . . . . . .647 sentry key® fcc general information . . . . . . . . . . . . . . . . . .19 sentry key (imm...

  • Page 690

    Engine block heater . . . . . . . . . . . . . . . . . . . . .424 engine fails to start . . . . . . . . . . . . . . . . . . . . .422 manual transmission . . . . . . . . . . . . . . . . . . . .420 remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 steering power . . . . . . . . . ....

  • Page 691

    Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .563 life of tires . . . . . . . . . . . . . . . . . . . . . . . . . . .508 load capacity . . . . . . . . . . . . . . . . . . . . . . . . .493 pressure monitor system (tpms) . . . . . . . . . . . .513 pressure warning light . . . . ...

  • Page 692

    Transaxle autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . . .439 transfer case . . . . . . . . . . . . . . . . . . . . . . . . . . . .624 fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .649 four-wheel-drive operation . . . . . . . . . . . . . . .441 maintenance ....

  • Page 693

    Upholstery care . . . . . . . . . . . . . . . . . . . . . . . . . .628 vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . .114 variance, compass . . . . . . . . . . . . . . . . . . . . . . . .324 vehicle identification number (vin) . . . . . . . . . . . . .8 vehicle loading . . . . ....

  • Page 694

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed prop- erly by trained personnel. The following must be obs...

  • Page 695

    Grand cherokee chrysler group llc o w n e r ’ s m a n u a l 2015 gr and cher ok ee 15wk741-126-aa first edition printed in u.S.A. 2 0 1 5.