Jeep Baby Traveller Portacot Instructions Manual - Important
of
20
12
To Assemble and Attach Changing Table
1
Take one of the provided metal
tubes and slide through one of
the sleeves at either end of the
changing table.
Gently press metal button inward
while guiding tube into corner
opening of U-shaped clip as
shown. Be sure that metal button
is securely locked into place.
Repeat at other end.
Position U-shaped clips of
changing table over side rail
as shown. Press down gently
ensuring that all clips are resting
securely in place.
Repeat for opposite end of
changing table.
Thread velcro webbing through
the plastic rings and fold back as
shown.
2
IMPORTANT
: Make sure
portable cot is fully assembled
with floor pad in place.
3
4
1
2
3
4