Jeep Baby Traveller Portacot Instructions Manual - To Fold Portable Cot

15

To Fold Portable Cot

IMPORTANT

: Top rails  

cannot be unlocked first.

1

Remove bassinet, changing table

and portable cot floor pad.

Take hold of handle and turn

handle to vertical position and

pull upright to unlock floor.

Handle should be even with 

top rails.

NOTE: A sharp fast pull will release  

floor locks.

Locate centre of each top rail.

Lift and squeeze centre of top

rail to release lock.  Then push 

down on top rail while continuing 

to squeeze.

NOTE: To fold, top rail must be lifted to 

release lock.  Top rail cannot be pushed 

in until the lock joint is lifted.  If top rail 

will not unlock, pull up sharply on centre 

floor handle to make sure ALL floor rails 

are unlocked.  Handle must be even with 

top rails.

Repeat for all sides.

Pull handle to bring floor 

completely up and gather legs

together.

NOTE: To fold compactly, the centre of 

the portable cot floor must be pulled all 

the way up.

2

3

4

5

2

3

5