1. DL manuals
  2. Jeep
  3. Automobile
  4. grand cherokee 2018
  5. User Manual

Jeep grand cherokee 2018 User Manual

Other manuals for grand cherokee 2018: Manual, Owner's Manual, Quick Reference Manual

Summary of grand cherokee 2018

  • Page 1

    2018 cherokee user guide ©2017 fca us llc. All rights reserved. Jeep is a registered trademark of fca us llc. Whether it’s providing information about specific product features, taking a tour through your vehicle’s heritage, knowing what steps to take following an accident, or scheduling your next a...

  • Page 2

    Important get warranty and other information online – you can review and print or download a copy of the owner’s manual, navigation/uconnect manuals and the limited warranties provided by fca us llc for your vehicle by visiting www.Mopar.Com (u.S.) or www.Owners.Mopar.Ca (canada). Click on the appli...

  • Page 3

    Congratulations on selecting your new fca us llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality. Always drive safely and pay attention to the road. Always drive safely with your hands on the steering wheel. You have full responsibil- ity and assum...

  • Page 4

    How to use this manual essential information each time direction instructions (left/right or forwards/backwards) about the vehicle are given, these must be intended as regarding an occupant in the driver's seat. Special cases not complying with this rule will be properly specified in the text. The f...

  • Page 5

    Warnings and cautions while reading this user guide you will find a series of warnings to be followed to pre- vent incorrect use of components which could cause accidents or injuries. There are also cautions that must be fol- lowed to prevent against procedures that could result in damage to your ve...

  • Page 6

    4.

  • Page 7

    Graphical table of contents getting to know your vehicle getting to know your instrument panel safety starting and operating in case of emergency servicing and maintenance technical specifications multimedia customer assistance index.

  • Page 8

    6.

  • Page 9

    Graphical table of contents instrument panel. . . . . . . . . . .8 interior . . . . . . . . . . . . . . . . . . .9 graphical table of contents 7.

  • Page 10

    Instrument panel instrument panel 1 — air vents 2 — multifunction lever 3 — steering wheel 4 — instrument cluster 5 — windshield wiper lever 6 — glove/storage compartment graphical t able of contents 8.

  • Page 11

    Interior interior features 1 — power window switches 4 — switch bank 7 — seats 2 — ignition start/stop button 5 — climate controls 3 — uconnect radio 6 — gear selector 9.

  • Page 12

    10

  • Page 13

    Getting to know your vehicle keys . . . . . . . . . . . . . . . . . . . . .13 key fob . . . . . . . . . . . . . . . . . . . . .13 ignition switch . . . . . . . . . . . .15 ignition node module (ignm) — if equipped . . . . . . . . . . . . . . . . . .15 keyless enter-n-go — ignition . . . . . . .16 re...

  • Page 14

    Reset auto-up . . . . . . . . . . . . . . . . .45 window lockout switch . . . . . . . . . . .45 power sunroof . . . . . . . . . . .45 opening. . . . . . . . . . . . . . . . . . . . .46 closing . . . . . . . . . . . . . . . . . . . . .46 wind buffeting . . . . . . . . . . . . . . . .46 power sun shad...

  • Page 15

    Keys key fob the key fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired position. The key fob also contains an emergency key, which is stored in the rear of the key fob. Your vehicle may be equippe...

  • Page 16

    The key fob allows you to lock or unlock the doors and liftgate from distances up to ap- proximately 66 ft (20 m) using a handheld key fob. The key fob does not need to be pointed at the vehicle to activate the system. • this feature allows the driver to operate the ignition switch with the push of ...

  • Page 17

    To lock the doors and liftgate push and release the lock button on the key fob to lock all doors and liftgate. Vehicles equipped with keyless enter-n-go — passive entry if one or more doors are open, or the liftgate is open, the doors will lock. The doors will unlock again automatically if the key i...

  • Page 18

    Keyless enter-n-go — ignition this feature allows the driver to operate the ignition switch with the push of a button as long as the key fob is in the passenger com- partment. The push button ignition operating modes are off, acc, run, and start. Note: if the ignition switch does not change with the...

  • Page 19

    Warning! A vehicle equipped with keyless enter- n-go in the on/run mode. A child could operate power windows, other controls, or move the vehicle. • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. Caution! An unlocked ...

  • Page 20

    To arm the system follow these steps to arm the vehicle security alarm: 1. Make sure the vehicle’s ignition is placed in the “off” mode. • for vehicles equipped with keyless en- try, make sure the vehicle’s keyless ignition system is off. 2. Perform one of the following methods to lock the vehicle: ...

  • Page 21

    Doors keyless enter-n-go — passive entry the passive entry system is an enhancement to the vehicle’s remote keyless entry system and a feature of keyless enter-n-go — pas- sive entry. This feature allows you to lock and unlock the vehicle’s door(s) and fuel door without having to push the key fob lo...

  • Page 22

    To unlock from the passenger side with a valid passive entry key fob within 5ft (1.5m) of the passenger door handle, grab the front passenger door handle to unlock all four doors and the liftgate automatically. Note: all doors will unlock when the front passen- ger door handle is grabbed regardless ...

  • Page 23

    To lock the liftgate with a valid passive entry key fob within 5ft (1.5m) of the liftgate, push the passive entry lock button located to the right of liftgate handle release. Note: the liftgate passive entry lock button will lock all doors and the liftgate. The liftgate unlock feature is built into ...

  • Page 24

    • if passive entry is disabled using the uconnect system, the key protection de- scribed in "preventing inadvertent locking of passive entry key fob in vehicle" remains active/functional. • the passive entry system will not operate if the key fob battery is dead. The vehicle doors can also be locked...

  • Page 25

    Seats memory seat the memory seat feature allows you to save two different driver seating positions, driver's outside mirror, and radio station preset set- tings. The memory seat buttons are located on the driver's door panel. To set a memory position: 1. Place the vehicle’s ignition in the on mode....

  • Page 26

    Note: the easy entry/exit feature is not enabled when the vehicle is delivered from the fac- tory. To enable (or later disable) this feature you must select “easy exit seats” in “engine off options” through the programmable fea- tures in the uconnect system.For further de- tails refer to “uconnect s...

  • Page 27

    Driver and front passenger cooler in higher ambient temperatures. The fans operate at two speeds, hi and lo. The front ventilated seats control buttons are located within the uconnect system. You can gain access to the control buttons through the climate screen or the controls screen. • press the ve...

  • Page 28

    Warning! • a loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow re- warning! Moved head restraints in a location out- side the occupant compartment. • all the head restraints must be rein- stalled in t...

  • Page 29

    Warning! Stops. Failure to follow this warning could cause personal injury if the active head restraint is deployed. Rear adjustment the rear outboard head restraints have three positions up, mid and down. The center head restraint has only two positions, up and down. When the center seat is being o...

  • Page 30

    Warning! Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the outboard head restraints are in their upright positions when the seat is to be occupied. Note: for proper routing of a child seat tether, refer to “...

  • Page 31

    Warning! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. Heated steering wheel if yo...

  • Page 32

    Switch once and the mirrors will fold in. Pushing the switch a second time will return the mirrors to the normal driving position. Note: if the vehicle speed is greater than 10 mph (16 km/h), the folding feature will be dis- abled. If the mirrors are in the folded position, and the vehicle speed is ...

  • Page 33

    High beams push the multifunction lever toward the in- strument panel to switch the headlights to high beams. Pulling the multifunction back toward the steering wheel will turn the low beams back on, or shut the high beams off. Flash-to-pass you can signal another vehicle with your headlights by lig...

  • Page 34

    • the headlight delay time is programmable us- ing the uconnect system, refer to “uconnect settings” in “multimedia” in the owner’s manual at www.Mopar.Com/en-us/care/ owners-manual.Html (u.S. Residents) or www.Owners.Mopar.Ca (canadian resi- dents) for further information front fog lights the front...

  • Page 35

    Wiper and washers front wipers the windshield wiper/washer controls are lo- cated on the multifunction lever on the right side of the steering column. The front wipers are operated by rotating a switch, located on the end of the lever. For information on the rear wiper/washer, refer to “rear wiper” ...

  • Page 36

    • the rain sensing feature may not function properly when ice or dried salt water is present on the windshield. • use of rain-x or products containing wax or silicone may reduce rain sensing perfor- mance. • the rain sensing feature can be turned on and off using the uconnect system, refer to “uconn...

  • Page 37

    Climate controls climate controls with a touchscreen overview uconnect 3 with 5–inch display with automatic temperature controls 35.

  • Page 38

    Uconnect 3c/3c nav with 8.4–inch display with automatic temperature controls getting to know your vehicle 36.

  • Page 39

    Automatic temperature faceplate controls 37.

  • Page 40

    Climate control with a touchscreen descriptions icon description max a/c button press and release to change the current setting, the indicator illuminates when max a/c is on. Performing this function again will cause the max a/c operation to switch into manual mode and the max a/c indicator will tur...

  • Page 41

    Icon description front defrost button press and release the touchscreen button, or push and release the button on the faceplate, to change the current airflow setting to defrost mode. The indicator illuminates when this feature is on. Air comes from the windshield and side win- dow demist outlets. W...

  • Page 42

    Icon description sync button — if equipped press the sync button on the touchscreen to toggle the sync feature on/off. The sync indicator is illuminated when this feature is enabled. Sync is used to synchronize the passenger temperature setting with the driver temperature set- ting. Changing the pas...

  • Page 43

    Icon description floor mode floor mode air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister out- lets. Mix mode mix mode air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy...

  • Page 44

    Mode settings. Also, make sure to select only panel, bi-level, or floor modes. Note: • if fog or mist appears on the windshield or side glass, select defrost mode, and in- crease blower speed if needed. • if your air conditioning performance seems lower than expected, check the front of the a/c cond...

  • Page 45

    To provide you with maximum comfort in the automatic mode during cold start-ups, the blower fan will remain on low until the engine warms up. The blower will increase in speed and transition into auto mode. Manual operation override this system offers a full complement of manual override features. T...

  • Page 46

    Windows power window controls the window controls on the driver's door control all the door windows. There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window con- trols will operate only when the ignition is in the acc or on/run positio...

  • Page 47

    Reset auto-up should the auto-up feature stop working, the window probably needs to be reset. To reset auto-up: 1. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two sec- onds after the window is closed. 2. Push the window switch down fi...

  • Page 48

    Opening opening sunroof — express • push the sunroof switch rearward and re- lease it within one-half second. The sunroof will automatically open to the halfway po- sition and stop automatically. • push the sunroof switch a second time from the halfway position and the sunroof will automatically ope...

  • Page 49

    Manual open to open the shade, push and hold the switch rearward. The shade will open and stop auto- matically at the half-open position. Push and hold the shade switch rearward again and the shade will open automatically to the full-open position. Express close push the switch forward and release i...

  • Page 50

    2. Move to the outside of the vehicle and pull the safety latch release lever forward (to- ward you). The safety latch release lever is located behind the front edge of the hood, slightly off-center to the right. Closing the hood warning! Be sure the hood is fully latched before driving your vehicle...

  • Page 51

    The liftgate passive entry unlock feature is built into the electronic liftgate release. With a valid passive entry key fob within 5 ft (1.5 m) of the liftgate, push the electronic liftgate release to open with one fluid motion. Push the button on the key fob twice within five seconds to release the...

  • Page 52

    Universal garage door opener (homelink) • homelink replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems. The homelink unit is powered by your vehicles 12 volt battery. • the homelink buttons that are located ...

  • Page 53

    Identifying whether you have a rolling code or non-rolling code device before programming a device to one of your homelink buttons, you must determine whether the device has a rolling code or non-rolling code. Rolling code devices to determine if your device has a rolling code, a good indicator is i...

  • Page 54

    2. Return to the vehicle and push the pro- grammed homelink button three times (holding the button for two seconds each time). If the garage door opener motor operates, programming is complete. 3. Push the programmed homelink button to confirm that the garage door opener motor operates. If the garag...

  • Page 55

    3. Without releasing the button, proceed with step 2 in “programming homelink to a garage door opener” and follow all re- maining steps. General information the following regulatory statement applies to all radio frequency (rf) devices equipped in this vehicle: this device complies with part 15 of t...

  • Page 56

    There is also a 12 volt power outlet located in the rear cargo area of the vehicle. This power outlet has power available directly from the battery (power available at all times). Items plugged into this outlet also may discharge the battery and/or prevent the engine from starting. Note: • do not ex...

  • Page 57

    Power outlets fuse locations 1 — f75 fuse 20a yellow front power outlet/cigar lighter console bin 2 — f81 fuse 20a yellow rear power outlet (battery powered at all times) 3 — f91 fuse 20a yellow rear power outlet (powered when the ignition switch is in the on or acc position) 4 — f60 fuse 20a yellow...

  • Page 58

    Power inverter a 115 or 230 volt, 150 watt power inverter outlet is located on the rear of the center console. This outlet can power cellular phones, electronics and other low power de- vices requiring power up to 150 watts. The power inverter is designed with built-in overload protection. If the po...

  • Page 59

    Getting to know your instrument panel instrument cluster display — if equipped . . . . . . .58 instrument cluster display controls . . . .58 instrument cluster display selectable items . . . . . . . . . . . . . . . . . . . . . .59 battery saver on/battery saver mode message — electrical load reducti...

  • Page 60

    Instrument cluster display — if equipped your vehicle may be equipped with an instru- ment cluster display, which offers useful in- formation to the driver. With the ignition in the stop/off mode, opening/closing of a door will activate the display for viewing, and display the total miles, or kilome...

  • Page 61

    Instrument cluster display selectable items the instrument cluster display can be used to view the following main menu items: note: depending on the vehicles options, feature settings may vary. Speedometer stop/start vehicle info audio driver assist messages fuel economy screen setup trip note: refe...

  • Page 62

    Loss of the battery charge may indicate one or more of the following conditions: • the charging system cannot deliver enough electrical power to the vehicle system be- cause the electrical loads are larger than the capability of charging system. The charging system is still functioning prop- erly. •...

  • Page 63

    — air bag warning light this light indicates a fault with the air bag, and will turn on for four to eight seconds as a bulb check when the ignition is placed in the on/run or acc/on/run position. This light will illuminate with a single chime when a fault with the air bag has been detected, it will ...

  • Page 64

    The light also will turn on when the parking brake is applied with the ignition switch in the on/run position. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application. — vehicle security warning light — if equipped this light will flash at a fa...

  • Page 65

    — battery charge warning light this light illuminates when the battery is not charging properly. If it stays on while the engine is running, there may be a malfunc- tion with the charging system. Contact your authorized dealer as soon as possible. This indicates a possible problem with the electrica...

  • Page 66

    If the bulb does not come on when turning the ignition switch from off to on/run, have the condition checked promptly. Certain conditions, such as a loose or missing gas cap, poor quality fuel, etc., may illumi- nate the light after engine start. The vehicle should be serviced if the light stays on ...

  • Page 67

    — electronic park brake warning light this telltale will turn on to indicate the elec- tronic park brake is not functioning properly and service is required. Contact your autho- rized dealer. — tire pressure monitoring system (tpms) warning light the warning light switches on and a message is displa...

  • Page 68

    Hicle that prevent the tpms from functioning properly. Always check the tpms malfunc- tion telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the tpms to continue to function properly. Caution! The tpms has been opt...

  • Page 69

    — adaptive cruise control (acc) fault warning light — if equipped this telltale will turn on to indicate a fault in the acc system. Contact your local autho- rized dealer for service. For further informa- tion, refer to “adaptive cruise control (acc)” in “starting and operating.” serv 4wd — service ...

  • Page 70

    Refer to “four-wheel drive operation — if equipped” in “starting and operating” for further information on four-wheel drive op- eration and proper use. — neutral indicator light — if equipped this light alerts the driver that the 4wd power transfer case is in the neutral mode and the front and rear ...

  • Page 71

    Note: • a continuous chime will sound if the ve- hicle is driven more than 1 mile (1.6 km) with either turn signal on. • check for an inoperative outside light bulb if either indicator flashes at a rapid rate. White indicator lights — adaptive cruise control (acc) ready light — if equipped this ligh...

  • Page 72

    Blue indicator lights — high beam indicator light this indicator shows that the high beam headlights are on. With the low beams acti- vated, push the multifunction lever forward (toward the front of the vehicle) to turn on the high beams. Pull the multifunction lever rear- ward (toward the rear of t...

  • Page 73

    Safety safety features . . . . . . . . . . .72 anti-lock brake system (abs) . . . . . .72 electronic brake control system . . . . .73 auxiliary driving systems . .84 blind spot monitoring . . . . . . . . . . . .84 forward collision warning (fcw) . . . . .86 tire pressure monitor system (tpms) . .87 ...

  • Page 74

    Safety features anti-lock brake system (abs) the anti-lock brake system (abs) provides increased vehicle stability and brake perfor- mance under most braking conditions. The system automatically prevents wheel lock, and enhances vehicle control during braking. The abs performs a self-check cycle to ...

  • Page 75

    Required. However, the conventional brake system will continue to operate normally if the “brake system warning light” is not on. If the “anti-lock brake warning light” is on, the brake system should be serviced as soon as possible to restore the benefits of anti-lock brakes. If the “anti-lock brake...

  • Page 76

    Warning! Acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. Bas cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. The capabilities of a bas-equipped vehicle must never b...

  • Page 77

    2. Shift the transmission into park. 3. Apply the parking brake. 4. Start the engine. 5. Rotate the steering wheel slightly more than one-half turn to the left. 6. Push the “esc off” button located in the lower switch bank below the climate con- trol four times within 20 seconds. The “esc off indica...

  • Page 78

    Esc uses sensors in the vehicle to determine the vehicle path intended by the driver and compares it to the actual path of the vehicle. When the actual path does not match the intended path, esc applies the brake of the appropriate wheel to assist in counteracting the oversteer or understeer conditi...

  • Page 79

    Should be used for most driving conditions. Alternate esc modes should only be used for specific reasons as noted in the following paragraphs. Partial off the “partial off” mode is intended for times when a more spirited driving experience is desired. This mode may modify tcs and esc thresholds for ...

  • Page 80

    Warning! • with the esc switched off, the en- hanced vehicle stability offered by esc is unavailable. In an emergency evasive maneuver, the esc system will not en- gage to assist in maintaining stability. Esc “full off” mode is only intended for off-highway or off-road use. • the electronic stabilit...

  • Page 81

    Wheel lift, it then applies the appropriate brake and may also reduce engine power to lessen the chance that wheel lift will occur. Erm can only reduce the chance of wheel lift occurring during severe or evasive driving maneuvers; it cannot prevent wheel lift due to other factors, such as road condi...

  • Page 82

    Rain brake support (rbs) rain brake support may improve braking performance in wet conditions. It will periodi- cally apply a small amount of brake pressure to remove any water buildup on the front brake rotors. It functions when the wind- shield wipers are in lo or hi speed. When rain brake support...

  • Page 83

    • d = 0.6 mph (1 km/h) • 1st = 0.6 mph (1 km/h) • 2nd = 1.2 mph (2 km/h) • 3rd = 1.8 mph (3 km/h) • 4th = 2.5 mph (4 km/h) • 5th = 3.1 mph (5 km/h) • 6th = 3.7 mph (6 km/h) • 7th = 4.3 mph (7 km/h) • 8th = 5.0 mph (8 km/h) • 9th = 5.6 mph (9 km/h) – if equipped note: during hdc the +/- shifter input...

  • Page 84

    Warning! Hdc is only intended to assist the driver in controlling vehicle speed when descend- ing hills. The driver must remain attentive to the driving conditions and is respon- sible for maintaining a safe vehicle speed. Selec speed control (ssc) — if equipped ssc is intended for off road driving ...

  • Page 85

    Note: • during ssc the +/- shifter input is used for ssc target speed selection but will not affect the gear chosen by the transmission. While actively controlling ssc the transmission will shift appropriately for the driver-selected set speed and corresponding driving conditions. • ssc performance ...

  • Page 86

    Auxiliary driving systems blind spot monitoring the blind spot monitoring (bsm) system uses two radar-based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, mo- torcycles etc.) that enter the blind spot zones from the rear/front/side of the ...

  • Page 87

    Rear cross path (rcp) the rear cross path (rcp) feature is in- tended to aid the driver when backing out of parking spaces where the vision of oncoming vehicles may be blocked. Proceed slowly and cautiously out of the parking space until the rear end of the vehicle is exposed. The rcp system will th...

  • Page 88

    General information the following regulatory statement applies to all radio frequency (rf) devices equipped in this vehicle: this device complies with part 15 of the fcc rules and with industry canada license- exempt rss standard(s). Operation is sub- ject to the following two conditions: 1. This de...

  • Page 89

    More cautious drivers that do not mind fre- quent warnings may prefer this setting. Note: this setting gives you the most reaction time. Near changing the fcw status to the “near” set- ting, allows the system to warn you of a potential frontal collision when you are much closer. This setting provide...

  • Page 90

    Tire pressure to the recommended cold plac- ard pressure in order for the “tire pressure monitoring telltale light” to turn off. Note: when filling warm tires, the tire pressure may need to be increased up to an additional 4 psi (30 kpa) above the recommended cold plac- ard pressure in order to turn...

  • Page 91

    • driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. • the tpms is not a substitute for proper tire maintenance, and it is...

  • Page 92

    Sures, the system will automatically update, the pressure values in the graphic display in the instrument cluster will return to their original color, and the “tire pressure monitor- ing telltale light” will turn off. Note: when filling warm tires, the tire pressure may need to be increased up to an...

  • Page 93

    5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare or non- matching full size, the tpms will update automatically. In addition, the “tpms telltale light” will turn off and the graphic in the instrument cluster will dis- play a new press...

  • Page 94

    Occupant restraint systems some of the most important safety features in your vehicle are the restraint systems: occupant restraint systems features • seat belt systems • supplemental restraint systems (srs) air bags • child restraints some of the safety features described in this section may be sta...

  • Page 95

    Warning! • never place a rear-facing child restraint in front of an air bag. A deploying pas- senger front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear- facing child restraint. • only use a rear-facing child restraint in a vehicle with a rear ...

  • Page 96

    The outboard front passenger seat beltalert is not active when the outboard front passen- ger seat is unoccupied. Beltalert may be triggered when an animal or other items are placed on the outboard front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be res...

  • Page 97

    Warning! • two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly. Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size. Warning! • a lap belt worn too high can ...

  • Page 98

    3. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 4. Position the lap belt so that it is snug and lies low across your hips, below your ab- domen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt...

  • Page 99

    4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted. Adjustable upper shoulder belt anchorage in the driver and front passenger seats, the top of the shoulder belt can be adjusted upward or downward to position the seat belt away from you...

  • Page 100

    Warning! • only use a seat belt extender if it is physically required in order to properly fit the original seat belt system. Do not use the seat belt extender if, when worn, the distance between the front edge of the seat belt extender buckle and the center of the occupant’s body is less than 6 inc...

  • Page 101

    Energy management feature the front seat belt system is equipped with an energy management feature that may help further reduce the risk of injury in the event of a collision. The seat belt system has a retrac- tor assembly that is designed to release web- bing in a controlled manner. Switchable aut...

  • Page 102

    How to engage the automatic locking mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull down- ward until the entire seat belt is extracted. 3. Allow the seat belt to retract. As the seat belt retracts, you will hear a clicking sound. This indicates the seat b...

  • Page 103

    The orc contains a backup power supply system that may deploy the air bag system even if the battery loses power or it becomes disconnected prior to deployment. The orc turns on the air bag warning light in the instrument panel for approximately four to eight seconds for a self-check when the igniti...

  • Page 104

    Front air bags this vehicle has front air bags and lap/ shoulder belts for both the driver and front passenger. The front air bags are a supple- ment to the seat belt restraint systems. The driver front air bag is mounted in the center of the steering wheel. The passenger front air bag is mounted in...

  • Page 105

    The first stage inflator is triggered immedi- ately during an impact that requires air bag deployment. A low energy output is used in less severe collisions. A higher energy output is used for more severe collisions. This vehicle may be equipped with a driver and/or front passenger seat belt buckle ...

  • Page 106

    When the orc detects a collision requiring the front air bags, it signals the inflator units. A large quantity of non-toxic gas is generated to inflate the front air bags. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the air b...

  • Page 107

    Warning! • never place a rear-facing child restraint in front of an air bag. A deploying pas- senger front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear- facing child restraint. • only use a rear-facing child restraint in a vehicle with a rear ...

  • Page 108

    Passenger’s seated weight on the front pas- senger seat may result in a full-power deploy- ment of the passenger advanced front air bag. Examples of improper front passenger seat- ing include: • the front passenger’s weight is transferred to another part of the vehicle (like the door, arm rest or in...

  • Page 109

    Warning! • if a child restraint system, child, small teenager or adult in the front passenger seat is seated improperly, the occupant may provide an output signal to the ocs that is different from the occupant’s properly seated weight input. This may result in serious injury or death in a collision....

  • Page 110

    • at no time should any supplemental re- straint system (srs) component or srs related component or fastener be modified or replaced with any part except those which are approved by fca us llc. Warning! • unapproved modifications or service procedures to the passenger seat assem- bly, its related co...

  • Page 111

    When the sab deploys, it opens the seam on the outboard side of the seatback’s trim cover (front seats) and the seam on the outboard side of the seat cushion’s trim cover (out- board rear seats — if equipped with rear sabs). The inflating sab deploys through the seat seam into the space between the ...

  • Page 112

    Are not belted and seated properly, or if items are positioned in the area where the sabics inflate. Children are at an even greater risk of injury from a deploying air bag. The sabics may help reduce the risk of partial or complete ejection of vehicle occu- pants through side windows in certain sid...

  • Page 113

    Warning! The seats. Children must be properly restrained in a child restraint or booster seat that is appropriate for the size of the child. Warning! • side air bags need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • being too close to the side air...

  • Page 114

    If a deployment occurs the front air bags are designed to deflate immediately after deployment. Note: front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system. If you do have a collision which deploys the air bags, any or all of the ...

  • Page 115

    Engine compartment and on the ground near the engine compartment and fuel tank before resetting the system and starting the engine. Maintaining your air bag system warning! • modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag ...

  • Page 116

    To read data recorded by an edr, special equipment is required, and access to the vehicle or the edr is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the edr. Ch...

  • Page 117

    Summary of recommendations for restraining children in vehicles child size, height, weight or age recommended type of child restraint infants and toddlers children who are two years old or younger and who have not reached the height or weight lim- its of their child restraint either an infant carrie...

  • Page 118

    Older children and child restraints children who are two years old or who have outgrown their rear-facing convertible child seat can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direc- tion are for children who are over two yea...

  • Page 119

    Buckle is latched. A child’s squirming or slouching can move the belt out of position. If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle, or use a booster seat to position the seat belt on the child correctly. Warning! Never allow a child to put the s...

  • Page 120

    Lower anchors and tethers for children (latch) restraint system your vehicle is equipped with the child re- straint anchorage system called latch, which stands for lower anchors and tethers for children. The latch system has three vehicle anchor points for installing latch- equipped child seats. The...

  • Page 121

    Frequently asked questions about installing child restraints with latch what is the weight limit (child’s weight + weight of the child restraint) for using the latch anchorage system to attach the child restraint? 65 lbs (29.5 kg) use the latch anchorage system until the combined weight of the child...

  • Page 122

    Locating the latch anchorages the lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between ...

  • Page 123

    Options for installing two child seats using the latch anchorages in this vehicle: 1. Right and left outboard seating positions (1 and 3): install the child seats in the right and left outboard seating positions using lower anchorages a and b, and d and e. Do not use the center seat anchor- age, c. ...

  • Page 124

    To install a latch-compatible child re- straint if the selected seating position has a switch- able automatic locking retractor (alr) seat belt, stow the seat belt, following the instruc- tions below. See the section “installing child restraints using the vehicle seat belt” to check what type of sea...

  • Page 125

    Warning! • improper installation of a child restraint to the latch anchorages can lead to failure of the restraint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. • child restraint anchorages are ...

  • Page 126

    Frequently asked questions about installing child restraints with seat belts what is the weight limit (child’s weight + weight of the child restraint) for using the tether anchor with the seat belt to attach a forward facing child restraint? Weight limit of the child restraint always use the tether ...

  • Page 127

    1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be moved forward and rearward in the vehicle, you may wish to move it to its rear-most posi- tion to ma...

  • Page 128

    1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to an- other...

  • Page 129

    Safety tips transporting passengers never transport passengers in the cargo area. Warning! • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • it is extremely dangerous to ride in a cargo area, inside or outside of a v...

  • Page 130

    Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.E., bent retractor, torn web- bing, etc.). If there is any question regarding seat belt or retractor condition, replace the seat belt. Air bag warn...

  • Page 131

    Warning! Clutch pedal (if present) to check for interference. If your floor mat interferes with the operation of any pedal, or is not secure to the floor, remove the floor mat from the vehicle and place the floor mat in your trunk. • only use the passenger’s side floor mat on the passenger’s side fl...

  • Page 132

    130

  • Page 133

    Starting and operating starting the engine . . . . . . .133 normal starting — gasoline engine . . .133 parking brake . . . . . . . . . . . .134 electric park brake (epb) . . . . . . . . .134 automatic transmission . . .136 key ignition park interlock . . . . . . . .137 brake/transmission shift inter...

  • Page 134

    Enabling and disabling parksense active park assist . . . . . . . . . . . . .157 lanesense. . . . . . . . . . . . . . . .158 lanesense operation . . . . . . . . . . . .158 turning lanesense on or off . . . . . . .159 lanesense warning message . . . . . . .159 changing lanesense status. . . . . . . ....

  • Page 135

    Starting the engine before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. If equipped with keyless enter-n-go, always make sure the ke...

  • Page 136

    Parking brake electric park brake (epb) your vehicle is equipped with a new electric park brake system (epb) that offers greater convenience. The park brake switch is lo- cated in the center console. To apply the park brake manually, pull up on the switch momentarily. The brake telltale light in the...

  • Page 137

    Caution! If the brake system warning light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. Warning! • never use the park position as a sub- stitute for the parking brake. Always ap- ply the parki...

  • Page 138

    • the seat belt is unbuckled. • the driver door is open. Safehold can be temporarily bypassed by pushing the electric park brake switch while the driver door is open. Once manually by- passed, safehold will be enabled again once the vehicle reaches 12 mph (20 km/h) or the ignition is turned to the o...

  • Page 139

    Caution! Damage to the transmission may occur if the following precautions are not ob- served: • shift into or out of park or reverse only after the vehicle has come to a complete stop. • do not shift between park, reverse, neutral, or drive when the engine is above idle speed. • before shifting int...

  • Page 140

    The nine-speed transmission has been devel- oped to meet the needs of current and future fwd/awd vehicles. Software and calibration is refined to optimize the customer’s driving experience and fuel economy. By design, some vehicle and driveline combinations uti- lize 9th gear only in very specific d...

  • Page 141

    The front wheels begin to lose traction, power is shifted automatically to the rear wheels. The greater the front wheel traction loss, the greater the power transfer to the rear wheels. Additionally, on dry pavement under heavy throttle input (where one may have no wheel spin), torque will be sent t...

  • Page 142

    Both the front and rear wheels. 4wd low is intended for loose, slippery road surfaces only. Driving in 4wd low on dry, hard- surfaced roads may cause increased tire wear and damage to driveline components. When operating your vehicle in 4wd low, the engine speed is approximately three times that of ...

  • Page 143

    Note: if shift conditions/interlocks are not met, a message will flash from the instrument clus- ter display with instructions on how to com- plete the requested shift. Refer to “instru- ment cluster display” in “getting to know your instrument panel” for further informa- tion. Shifting out of 4x4 l...

  • Page 144

    5. Shift the transmission into neutral. 6. Using a ballpoint pen or similar object, push and hold the recessed power transfer unit neutral (n) button (located by the selector switch) for four seconds. The light behind the neutral (n) symbol will blink, indicating shift in progress. The light will st...

  • Page 145

    2. The ignition in the on mode and the engine running. 3. To disengage rear e-locker, push the rear lock button once. Note: • it may also be necessary to drive slowly steering back and forth to complete en- gagement and disengagement of the e-locker. • when engaging rear e-locker, the indica- tor li...

  • Page 146

    Tain operating conditions), the transmis- sion may use second gear (rather than first gear) during launches, to minimize wheel slippage. • sport — this mode alters the transmis- sion's automatic shift schedule for sportier driving. Upshift speeds are increased to make full use of available engine po...

  • Page 147

    Refer to the “stop/start system” in the “starting and operating” in your owner’s manual at www.Mopar.Com/en-us/care/ owners-manual.Html (u.S. Residents) or www.Owners.Mopar.Ca (canadian residents) for further information. Possible reasons the engine does not autostop prior to engine shut down, the s...

  • Page 148

    • stop/start off switch is pushed. • a stop/start system error occurs. • 4wd system is put into 4lo mode (if equipped with 4wd). Conditions that force an application of the electric park brake while in autostop mode: • the driver’s door is open and brake pedal released. • the driver’s door is open a...

  • Page 149

    Speed control the speed control switches are located on the right side of the steering wheel. Activation push the on/off button to activate the speed control, “cruise control ready” will appear on the instrument cluster display to indicate the speed control is on. Push the on/off button a second tim...

  • Page 150

    The driver's preferred units can be selected through the instrument panel settings if equipped. Refer to “getting to know your instrument panel” in the owner’s manual at www.Mopar.Com/en-us/care/owners-manual.Html (u.S. Residents) or www.Owners.Mopar.Ca (canadian residents) for more information. The...

  • Page 151

    Deactivation a soft tap on the brake pedal, pushing the canc button, or normal brake pressure while slowing the vehicle will deactivate the speed control without erasing the set speed from memory. Pushing the on/off button or turning the igni- tion switch off erases the set speed from memory. Adapti...

  • Page 152

    Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this oc- curs: • the message “driver override” will appear in the instrument cluster display. • the system will not be controlling the dis- tance between your vehicle and the v...

  • Page 153

    To decrease speed while acc is set, the set speed can be de- creased by pushing the set (-) button. The driver's preferred units can be selected through the instrument panel settings if equipped. Refer to “getting to know your instrument panel” in the owner’s manual at www.Mopar.Com/en-us/care/owner...

  • Page 154

    Acc calculates and sets the distance to the vehicle ahead. This distance setting appears in the instrument cluster display. • to increase the distance setting, push the distance setting—increase button and re- lease. Each time the button is pushed, the distance setting increases by one bar (lon- ger...

  • Page 155

    Warning! The brakes must be applied manually. An audible chime will sound when the brakes are released. You should switch off the acc system: • when driving in fog, heavy rain, heavy snow, sleet, heavy traffic, and complex driving situations (i.E., in highway con- struction zones). • when entering a...

  • Page 156

    Enabling and disabling parksense parksense can be enabled and disabled with the parksense switch, located on the switch panel below the uconnect display. When the parksense switch is pushed to dis- able the system, the instrument cluster display will show the “parksense off” message for approximatel...

  • Page 157

    • use the parksense switch to turn the parksense system off if objects such as bicycle carriers, etc. Are placed within 12 inches (30 cm) from the rear fascia/ bumper. Failure to do so can result in the system misinterpreting a close object as a sensor problem, causing the “parksense unavailable ser...

  • Page 158

    Note: if your vehicle is equipped with the parksense active park assist system, six sen- sors will be located in the rear fascia/bumper. Refer to the "parksense active park assist system" section for further information. The six parksense sensors, located in the front fascia/bumper, monitor the area...

  • Page 159

    The parksense switch led lights up also in the case of a parksense system failure. If the button is pushed with a system failure, the parksense switch led flashes for about 5 seconds, then it stays on constantly. After the parksense has been disengaged, it will stay in this condition until the follo...

  • Page 160

    Warning! • drivers must be careful when backing up even when using parksense. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue ...

  • Page 161

    Note: when operating conditions have been met, the lanesense system will monitor if the driver’s hands are on the steering wheel and provide an audible and visual warning to the driver when the driver’s hands are not de- tected on the steering wheel. The system will cancel if the driver does not ret...

  • Page 162

    • when the lanesense system senses the lane has been approached and is in a lane departure situation, the left thick lane line flashes from white to gray, the left thin line remains solid white and the lanesense telltale changes from solid yellow to flash- ing yellow. At this time torque is applied ...

  • Page 163

    Note: the lanesense system operates with the similar behavior for a right lane departure. Changing lanesense status the lanesense system has settings to adjust the intensity of the torque warning and the warning zone sensitivity (early/late) that you can configure through the uconnect system screen....

  • Page 164

    Refueling the vehicle the gas cap is located behind the fuel filler door, on the passenger side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap has been designed for use with this vehicle. Note: when removing the fuel filler cap, lay the cap tether in the hook, located...

  • Page 165

    Note: • in certain cold conditions, ice may prevent the fuel door from opening. If this occurs, lightly push on the fuel door to break the ice buildup and re-release the fuel door using the inside release button. Do not pry on the door. • when the fuel nozzle “clicks” or shuts off, the fuel tank is ...

  • Page 166

    Trailer towing trailer towing weights (maximum trailer weight ratings) engine/transmission model frontal area maximum gtw (gross trailer wt.) maximum tongue wt. (see note) 2.4l/automatic with or without trailer tow package fwd or 4wd 32 sq ft (2.97 sq m) 2,000 lbs (907 kg) 200 lbs (90 kg) 3.2l/autom...

  • Page 167

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle 4x4 models towing condition wheels off the ground front-wheel drive (fwd) models 1-speed power transfer unit 2-speed power transfer unit flat tow none not allowed not allowed see instructions: • before towing, se...

  • Page 168

    Recreational towing — front-wheel drive (fwd) models do not flat tow this vehicle. Damage to the drivetrain will result. Recreational towing (for front-wheel drive models) is allowed only if the front wheels are off the ground. This may be accom- plished using a tow dolly or vehicle trailer. If usin...

  • Page 169

    Caution! • do not dolly tow any 4x4 vehicle. Tow- ing with only one set of wheels on the ground (front or rear) will cause severe transmission and/or power transfer unit damage. Tow with all four wheels either on the ground, or off the ground (using a vehicle trailer). • tow only in a forward direct...

  • Page 170

    7. After the shift is completed and the neu- tral (n) light stays on, release the neu- tral (n) button. 8. Start the engine. 9. Release the parking brake. 10. Shift the transmission into reverse. 11. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 12. Shift the...

  • Page 171

    6. Using a ballpoint pen or similar object, push and hold the recessed power transfer unit neutral (n) button (located by the selector switch) for one second. 7. When the neutral (n) indicator light turns off, release the neutral (n) button. 8. After the neutral (n) button has been released, the pow...

  • Page 172

    170

  • Page 173

    In case of emergency hazard warning flashers . . . . . . . . . . . . . . . .172 control . . . . . . . . . . . . . . . . . . . .172 bulb replacement . . . . . . . .172 replacement bulbs . . . . . . . . . . . . .172 replacing exterior bulbs. . . . . . . . . .173 fuses . . . . . . . . . . . . . . . . ....

  • Page 174

    Hazard warning flashers control the hazard warning flasher switch is located on the switch bank just above the climate controls. Push the switch to turn on the hazard warn- ing flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an em...

  • Page 175

    Exterior bulbs bulb number low beam/high beam (bi-halogen) headlamps 9005hl + low beam/high beam (bi-xenon) headlamps d3s (serviced at an authorized dealer) front park/daytime running lamps led (serviced at an authorized dealer) front turn signal lamps wy21w front fog lamps psx24w rear tail/stop lam...

  • Page 176

    Bi-halogen headlamps 1. Remove the three hex head screws from the wheel liner. 2. Pull the exterior edge of the liner towards the tire to gain access to the headlamp bulb cap. 3. Firmly grasp the cap and rotate it counter- clockwise to unlock it. 4. Firmly grasp the bulb and connector as- sembly and...

  • Page 177

    Bodyside mounted back-up lamp 1. Open the liftgate. 2. Remove the screws that fasten the body- side mounted lamp housing to the vehicle. 3. Grasp the tail lamp and pull firmly rear- ward to disengage the lamp from the vehicle. 4. Disconnect the electrical connector. 5. Twist the socket counterclockw...

  • Page 178

    General information the fuses protect electrical systems against excessive current. When a device does not work, you must check the fuse element inside the blade fuse for a break/melt. Also, please be aware that when using power outlets for extended periods of time with the engine off may result in ...

  • Page 179

    Cavity blade fuse cartridge fuse description f13 10 amp red – voltage stability mod (vsm)/ powertrain control mod (pcm)/ engine control module (ecm) f14 10 amp red – drivetrain control module (dtcm)/ power take-off unit (ptu)/electric park brake (epb)/rdm/brake sys- tem module (bsm) – if equipped/ b...

  • Page 180

    Cavity blade fuse cartridge fuse description f25b 20 amp yellow – front washer – if equipped with stop/start engine option f26 – 30 amp pink fuel heater – diesel only f27 – – not used f28 15 amp blue – transmission control module (tcm) f29 – – not used f30 10 amp red – engine control module (ecm)/ (...

  • Page 181

    Cavity blade fuse cartridge fuse description f41 – 60 amp yellow body controller module (bcm) – feed 1 f41 – 50 amp red voltage stability module - feed 1 – if equipped with stop/start en- gine option f42 – 30 amp pink trailer tow electric brake module – if equipped f43 20 amp yellow – fuel pump moto...

  • Page 182

    Cavity blade fuse cartridge fuse description f56 15 amp blue – ignition node module (ignm)/ kin/rf hub/electric steering col- umn lock (escl) f57 20 amp yellow – trailer tow lights left – if equipped f58 10 amp red – occupant classification module/ vsm/tt mod/escl f59 – 30 amp pink drivetrain contro...

  • Page 183

    Cavity blade fuse cartridge fuse description f67 10 amp red – in vehicle temperature sensor/ humidity sensor/driver assist sys- tem module (dasm)/park assist (pam) – if not equipped with stop/start option f68 – – not used f69 10 amp red – power transfer unit switch (tsbm)/active grill shutter (ags) ...

  • Page 184

    Cavity blade fuse cartridge fuse description f78 10 amp red – diagnostic port/digital tv (japan only) f79 10 amp red – integrated center stack (ics)/ electric park brake (epb) sw/cd mod/steering control mod (sccm)/ hvac/instrument panel cluster (ipc) f80 20 amp yellow – radio / cd – if equipped f81 ...

  • Page 185

    Cavity blade fuse cartridge fuse description f94 – 30 amp pink electric park brake (epb) – right f95 10 amp red – electrochromatic mirror/rain sensor/sunroof – if equipped/ passenger window switch/power outlet console/digital tv (japan only) f96 10 amp red – occupant restraint controller (orc)/(airb...

  • Page 186

    Cavity blade fuse description f43 20 amp yellow washer pump front f48 25 amp clear fog lamp rear left/right – if equipped f49 7.5 amp brown lumbar support f50 7.5 amp brown wireless charging pad – if equipped f51 10 amp red driver window switch/power mirrors – if equipped f53 7.5 amp brown uci port ...

  • Page 187

    Jack location/spare tire stowage the jack, wheel chocks and spare tire are stowed under the load floor behind the rear seat. 1. Open the liftgate. 2. Lift the access cover using the load floor handle. 3. Remove the hook from the stowed posi- tion on the back side of the load floor and place the hook...

  • Page 188

    6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if the right front wheel is being changed, block the left rear wheel. Note: passengers should not remain in the vehicle when the vehicle is being jacked. Jacking instructions warning! Carefully follo...

  • Page 189

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indi- cated in the jacking instructions for this vehicle. 1. Remove the spare tire, jack, and wheel bolt wrench. 2. If equipped with aluminum wheels where the center cap covers the wheel bolts, use the wheel bolt w...

  • Page 190

    5. Raise the vehicle just enough to remove the flat tire. Warning! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the wheel bolts and tire. 7. Remove the alig...

  • Page 191

    Warning! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire re- paired or replaced immediately. Changing procedure 1. Mount the road tire on t...

  • Page 192

    Tire service kit components and operation using the mode select knob and hoses your tire service kit is equipped with the following symbols to indicate the air or seal- ant mode. Selecting air mode turn the mode select knob (5) to this posi- tion for air pump operation only. Use the black air pump h...

  • Page 193

    • for optimum performance, make sure the valve stem on the wheel is free of debris before connecting the tire service kit. • you can use the tire service kit air pump to inflate bicycle tires. The kit also comes with two needles, located in the accessory stor- age compartment (on the bottom of the a...

  • Page 194

    Sealing a tire with tire service kit (a) whenever you stop to use tire service kit: 1. Pull over to a safe location and turn on the vehicle’s hazard warning flashers. 2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground. This will allow the ...

  • Page 195

    Note: if the mode select knob (5) is on air mode and the pump is operating, air will dispense from the air pump hose (7) only, not the sealant hose (6). If the sealant (white fluid) does flow through the sealant hose (6): 1. Continue to operate the pump until seal- ant is no longer flowing through t...

  • Page 196

    Warning! Tire service kit is not a permanent flat tire repair. Have the tire inspected and re- paired or replaced after using tire service kit. Do not exceed 55 mph (90 km/h) until the tire is repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to yo...

  • Page 197

    5. Position the new sealant bottle (1) in the housing so that the sealant hose (6) aligns with the hose slot in the front of the housing. Push the bottle into the housing. An audible click will be heard indicating the bottle is locked into place. 6. Verify that the cap is installed on the fitting at...

  • Page 198

    Warning! • batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive. Keep open flames or sparks away from the battery. 1. Apply the parking brake, shift the auto- matic transmission into park and turn the ignition to lock. 2. Turn off...

  • Page 199

    6. Once the engine is started, remove the jumper cables in the reverse sequence: disconnecting the jumper cables 1. Disconnect the negative (-) end of the jumper cable from the engine ground of the vehicle with the discharged battery. 2. Disconnect the opposite end of the nega- tive (-) jumper cable...

  • Page 200

    Note: there are steps that you can take to slow down an impending overheat condition: • if your air conditioner (a/c) is on, turn it off. The a/c system adds heat to the engine cooling system and turning the a/c off can help remove this heat. • you can also turn the temperature control to maximum he...

  • Page 201

    Freeing a stuck vehicle if your vehicle becomes stuck in mud, sand or snow, it can often be moved using a rocking motion. Turn the steering wheel right and left to clear the area around the front wheels. Push and hold the lock button on the gear selector. Then shift back and forth between drive and ...

  • Page 202

    Towing a disabled vehicle this section describes procedures for towing a disabled vehicle using a commercial towing service. If the transmission and drivetrain are operable, disabled 4x4 vehicles may also be towed as described under “recreational tow- ing” in the “starting and operating” section. 4x...

  • Page 203

    Note: • you must ensure that the auto park brake feature is disabled before towing this ve- hicle, to avoid inadvertent electric park brake engagement. The auto park brake feature is enabled or disabled via the cus- tomer programmable features in the uconnect settings. • vehicles with a discharged b...

  • Page 204

    4x4 models with 1–speed power transfer unit the manufacturer requires towing with all four wheels off the ground. Acceptable methods are to tow the vehicle on a flatbed, or with one end of vehicle raised and the opposite end on a towing dolly. Warning! • do not tow this vehicle with any of its wheel...

  • Page 205

    Warning! Recovery straps should only be used in emergencies to rescue stranded vehicles. Only use recovery straps on vehicles that fit within the recommended gvw of your recovery strap. Only attach recovery straps to oe recommended anchor points or emergency towing anchor points. Never attach to tow...

  • Page 206

    204.

  • Page 207

    Servicing and maintenance scheduled servicing . . . . . .206 maintenance plan . . . . . . . . . . . . . .207 heavy duty use of the vehicle . . . . . .208 engine compartment . . . . .209 2.4l engine . . . . . . . . . . . . . . . . .209 3.2l engine . . . . . . . . . . . . . . . . .210 checking oil lev...

  • Page 208

    Scheduled servicing your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This ...

  • Page 209

    Maintenance plan required maintenance intervals. Refer to the “maintenance plan” in this sec- tion for the required maintenance intervals. At every oil change interval as indicated by oil change indicator system: • change oil and filter at every oil change interval as indicated by oil change indicat...

  • Page 210

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000...

  • Page 211

    Engine compartment 2.4l engine 1 — engine coolant reservoir 5 — battery 2 — oil fill cap 6 — washer fluid reservoir 3 — brake fluid reservoir 7 — engine oil dipstick 4 — power distribution center (fuses) 8 — air cleaner filter 209.

  • Page 212

    3.2l engine 1 — engine coolant reservoir 6 — washer fluid reservoir 2 — oil filter access cover 7 — engine oil dipstick 3 — brake fluid reservoir 8 — engine oil fill 4 — power distribution center (fuses) 9 — air cleaner filter 5 — battery servicing and maintenance 210

  • Page 213

    Checking oil level to assure proper engine lubrication, the en- gine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five min- utes after a fully warmed up engine is shut off. Checkin...

  • Page 214

    Warning! • battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other. • battery posts, terminals, and related ac- cessories contain l...

  • Page 215

    Engine air cleaner filter refer to the “maintenance plan” in this sec- tion for the proper maintenance intervals. Note: be sure to follow the “severe duty condi- tions” maintenance interval if applicable. Warning! The air induction system (air cleaner, hoses, etc.) can provide a measure of pro- tect...

  • Page 216

    Warning! • use only refrigerants and compressor lubricants approved by the manufac- turer for your air conditioning system. Some unapproved refrigerants are flam- mable and can explode, injuring you. Other unapproved refrigerants or lubri- cants can cause the system to fail, re- quiring costly repai...

  • Page 217

    2. Pull the console closeout cover rearward to disengage the front retaining tab and remove the cover. 3. Pull down the passenger hush panel un- der the dash panel 4. Remove the filter door by pushing down the tab on the top of the door to release the cover then rotate the door out and lift up. Cons...

  • Page 218

    5. Remove the a/c air filter by pulling it straight out of the housing. Take note of the air filter position indicators. 6. Install the a/c air filter with the air filter position indicators pointing in the same direction as removal. Caution! The cabin air filter is identified with an arrow to indic...

  • Page 219

    Front wiper blade removal/installation caution! Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged. 1. Lift the wiper arm to raise the wiper blade off of the glass, until the wiper arm is in the full up position. 2. To disengage t...

  • Page 220

    Arm with the other hand (move the wiper blade toward the right side of the vehicle to separate the wiper blade from the wiper arm). 4. Gently lower the wiper arm onto the glass. Installing the front wipers 1. Lift the wiper arm off of the glass, until the wiper arm is in the full up position. 2. Pos...

  • Page 221

    2. Lift the rear wiper arm fully off the glass. 3. To remove the wiper blade from the wiper arm, grasp the bottom end of the wiper blade nearest to wiper arm with your right hand. With your left hand hold the wiper arm as you pull the wiper blade away from the wiper arm past its stop far enough to u...

  • Page 222

    Installing the rear wiper 1. Lift the rear wiper arm pivot cap away from the glass to allow the rear wiper blade to be raised off of the glass. Note: the rear wiper arm cannot be fully raised off the glass unless the wiper arm pivot cap is unsnapped first. Attempting to fully raise the rear wiper ar...

  • Page 223

    Check the engine cooling system hoses for brittle rubber, cracking, tears, cuts, and tightness of the connection at the coolant recovery bottle and radiator. Inspect the en- tire system for leaks. Do not remove the coolant pressure cap when the cooling system is hot. Automatic transmission fluid lev...

  • Page 224

    Note: • p (passenger) — metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designation. Example: p215/65r15 95h. • european — metric tire sizing is based on european design standards. Tires designed to this standard ha...

  • Page 225

    Example: r = construction code • "r" means radial construction, or • "d" means diagonal or bias construction 15, 16, 18 = rim diameter in inches (in) service description: 95 = load index • a numerical code associated with the maximum load a tire can carry h = speed symbol • a symbol indicating the r...

  • Page 226

    Tire identification number (tin) the tin may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 227

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours,...

  • Page 228

    Tire loading and tire pressure note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver's side door. Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly and inflate to the recommended pressure...

  • Page 229

    To determine the maximum loading condi- tions of your vehicle, locate the statement “the combined weight of occupants and cargo should never exceed xxx kg or xxx lbs” on the tire and loading information placard. The combined weight of occupants, cargo/ luggage and trailer tongue weight (if appli- ca...

  • Page 230

    Servicing and maintenance 228.

  • Page 231

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stop- ping distance. Use tires of the recom- mended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pre...

  • Page 232

    Tire inflation pressures the proper cold tire inflation pressure is listed on the driver's side b-pillar or rear edge of the driver's side door. At least once a month: • check and adjust tire pressure with a good quality pocket-type pressure gauge. Do not make a visual judgement when determining pro...

  • Page 233

    Radial ply tires warning! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause a collision. Always use radial ply tires in sets of four. Never combine them with other types of tires. Tire repair if your tire become...

  • Page 234

    Tread wear indicators tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes a 1/16 of an inch (1.6 mm). When the...

  • Page 235

    It is recommended you contact your autho- rized tire dealer or original equipment dealer with any questions you may have on tire specifications or capability. Failure to use equivalent replacement tires may adversely affect the safety, handling, and ride of your vehicle. Warning! • do not use a tire...

  • Page 236

    Snow tires some areas of the country require the use of snow tires during the winter. Snow tires can be identified by a “mountain/snowflake” symbol on the tire sidewall. If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of f...

  • Page 237

    Since this tire has limited tread life, the original equipment tire should be repaired (or replaced) and reinstalled on your vehicle at the first opportunity. Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for...

  • Page 238

    Your wheels are susceptible to deterioration caused by salt, sodium chloride, magnesium chloride, calcium chloride, etc., and other road chemicals used to melt ice or control dust on dirt roads. Use a soft cloth or sponge and mild soap to wipe away promptly. Do not use harsh chemicals or a stiff bru...

  • Page 239

    • due to limited clearance, the following traction devices are recommended: front wheel drive (fwd) models • original equipment 225/60r17 and 225/ 55r18 tire sizes are not chainable. • the use of 7 mm snow chains is permitted with the use of 215/60r17 tires on size 17 x 7.0 et41 wheels. Four wheel d...

  • Page 240

    Caution! • do not use traction devices on a com- pact spare tire. Tire rotation recommendations the tires on the front and rear of your vehicle operate at different loads and perform differ- ent steering, handling, and braking func- tions. For these reasons, they wear at unequal rates. These effects...

  • Page 241

    Department of transportation uniform tire quality grades the following tire grading categories were established by the national high- way traffic safety administration. The specific grade rating assigned by the tire's manufacturer in each category is shown on the sidewall of the tires on your vehicl...

  • Page 242

    Sent higher levels of performance on the laboratory test wheel, than the minimum required by law. Warning! The temperature grade for this tire is established for a tire that is prop- erly inflated and not overloaded. Ex- cessive speed, under-inflation, or excessive loading, either separately or in c...

  • Page 243

    Bodywork preserving the bodywork washing • wash your vehicle regularly. Always wash your vehicle in the shade using mopar car wash, or a mild car wash soap, and rinse the panels completely with clear water. • if insects, tar, or other similar deposits have accumulated on your vehicle, use mopar supe...

  • Page 244

    Seat belt maintenance do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the belts from the vehicle to wash them. ...

  • Page 245

    Note: if equipped with light colored leather, it tends to show any foreign material, dirt, and fabric dye transfer more so than darker colors. The leather is designed for easy cleaning, and fca recommends mopar total care leather cleaner applied on a cloth to clean the leather seats as needed. Cauti...

  • Page 246

    244.

  • Page 247

    Technical specifications vehicle identification number . . . . . . . . . . . . . . . . . .246 wheel and tire torque specifications. . . . . . . . . . . .247 torque specifications . . . . . . . . . . .247 fuel requirements . . . . . . .247 2.4l and 3.2l engines . . . . . . . . . .247 do not use e-85 ...

  • Page 248

    Vehicle identification number the vehicle identification number (vin) is found on the left front corner of the instru- ment panel. The vin is visible from outside of the vehicle through the windshield. The vin number also is stamped into the right front body, on the right front seat cross member. Wi...

  • Page 249

    Wheel and tire torque specifications proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been re- moved and reinstalled on the vehicle, the lug nuts/bolts should be torqued using a properly calibrated torque wrench using a hi...

  • Page 250

    While operating on gasoline with an octane number of 87, hearing a light knocking sound from the engine is not a cause for concern. However, if the engine is heard making a heavy knocking sound, see your dealer imme- diately. Use of gasoline with an octane num- ber lower than 87 can cause engine fai...

  • Page 251

    Fluid capacities u.S. Metric fuel (approximate) 2.4l and 3.2l engines 15.8 gallons 60 liters engine oil with filter 2.4 liter engine (sae 0w-20, api certified) 5.5 quarts 5.2 liters 3.2 liter engine (sae 5w-20, api certified) 6 quarts 5.6 liters cooling system* 2.4 liter engine (mopar antifreeze/eng...

  • Page 252

    Component fluid, lubricant, or genuine part engine oil – 3.2l engine we recommend you use api certified sae 5w-20 engine oil, meeting the requirements of fca material standard ms-6395 such as mopar, penn- zoil, and shell helix. Refer to your engine oil filler cap for correct sae grade. Engine oil fi...

  • Page 253

    Chassis component fluid, lubricant, or genuine part automatic transmission use only mopar zf 8&9 speed atf automatic transmission fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Brake master cylinder we recommend you use mopar dot 3...

  • Page 254

    • wheel locks • locking gas cap • spare tire kit • license plate frames • side window air deflectors • camping tent • valve stem caps • vehicle cover interior: • premium floor mats • emergency roadside kit • molded cargo tray • security cover • bright pedal kit • katzkin leather interiors • all-weat...

  • Page 255

    Multimedia cybersecurity . . . . . . . . . . .255 tips controls and general information . . . . . . . . . . . . .256 steering wheel audio controls . . . . . .256 reception conditions . . . . . . . . . . . .256 care and maintenance . . . . . . . . . . .256 anti-theft protection . . . . . . . . . . . ...

  • Page 256

    Pairing (wirelessly connecting) your mobile phone to the uconnect system . . . . . . . . . . . . . . . . . . . .289 common phone commands (examples) . . . . . . . . . . . . . . . . . .292 mute (or unmute) microphone during call . . . . . . . . . . . . . . . . . .292 transfer ongoing call between han...

  • Page 257

    Cybersecurity your vehicle may be a connected vehicle and may be equipped with both wired and wire- less networks. These networks allow your ve- hicle to send and receive information. This information allows systems and features in your vehicle to function properly. Your vehicle may be equipped with...

  • Page 258

    Tips controls and general information steering wheel audio controls the steering wheel audio controls are located on the rear surface of the steering wheel. Right switch • push the switch up or down to increase or decrease the volume. • push the button in the center to change modes am/fm/cd/sxm. Lef...

  • Page 259

    If the check has a positive outcome, the system will start to operate, whereas if the comparison codes are not the same or if the electronic control unit (body computer) is replaced, the system will ask the user to enter the secret code. See an authorized dealer for further information. Uconnect acc...

  • Page 260

    Before you drive, familiarize yourself with the easy-to-use uconnect access services. 1. The assist and 9-1-1 buttons are lo- cated on your rearview mirror. The assist button is used for contacting roadside assistance, vehicle care and uconnect access care. The 9-1-1 button connects you to emergency...

  • Page 261

    2. Press the “uconnect care” button on the touchscreen. 3. A helpful uconnect care agent will regis- ter your vehicle and handle all of the details. Signing up is easy! Simply follow the steps above. Or, press the “apps ” button on the touchscreen, then select the uconnect registration app to “regis...

  • Page 262

    • press the “location” button on the bottom menu bar of the app to bring up a map to locate your vehicle or send a location to your uconnect navigation using vehicle finder and send ‘n go , if equipped. • press the “settings” side menu in the up- per left corner of the app to bring up app settings. ...

  • Page 263

    To send a navigation route to your vehicle: 1. Press the “location” tab on the uconnect mobile app bottom bar. 2. Either type in the destination you would like to navigate to, or search through one of the categories provided. 3. Select the destination you want to route to from the list that appears....

  • Page 264

    Getting started with apps applications (apps for short) in your uconnect access system are designed to de- liver the features and services that you want. The types of apps you can use with uconnect access are: • built-in features — use the 1x (voice/data) or 3g (data) network on your uconnect 3c or ...

  • Page 265

    Built-in features warning! Always drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the uconnect features and applications in this vehicle. Only use uconnect when it is safe to do so. Failure to do so may result in an accident involvin...

  • Page 266

    Assist call (3c/3c nav) the rearview mirror contains an assist push button, and the touchscreen contains a uconnect app, which will automatically con- nect the vehicle occupants to one of these predefined destinations for immediate sup- port: • roadside assistance call — if you get a flat tire, or n...

  • Page 267

    Uconnect care or vehicle care, whether such conversations are initiated through the uconnect services in your vehicle, your de- vice or via a landline device, and may share information obtained through such recording and monitoring in accordance with regulatory requirements. You acknowledge, agree a...

  • Page 268

    Warning! Never use the 3g wi-fi hotspot when you are driving the vehicle. As the driver, you should only use the 3g wi-fi hotspot when the vehicle is parked in a safe loca- tion. Failure to do so may result in an accident involving serious injury or death. Vehicle health report/alert your vehicle wi...

  • Page 269

    Remote door lock/unlock this feature provides the ability to lock or unlock the door on your vehicle, without the keys and from virtually any distance. You can send a request to your vehicle in one of three ways: 1. Using the uconnect app from a compat- ible device. 2. From the mopar owner connect w...

  • Page 270

    To send a text message 1. Push the uconnect phone button on the steering wheel. 2. Wait for the beep. 3. Say “text.” 4. Uconnect will prompt you “say the phone number, or full name and phone type of the contact you want to send a message to.” 5. Wait for the beep and say a contact that is in your ph...

  • Page 271

    Uconnect 3 with 5-inch display controls on the front panel uconnect 3 with 5-inch display radio 1 — radio button 2 — compass button 3 — climate button 4 — more functions button 5 — uconnect phone button 6 — media button 269.

  • Page 272

    Clock setting to start the clock setting procedure: 1. Push the more button on the faceplate. Next press the “settings” button on the touchscreen and then press the “clock and date” button on the touchscreen. 2. Press the “set time” button on the touchscreen. 3. Press the “up” or “down” arrows to ad...

  • Page 273

    Radio mode uconnect 3 with 5–inch display radio 1 — radio station presets 2 — show all presets 3 — seek up 4 — audio settings 5 — station info 6 — direct tune 7 — radio band 8 — seek down 271.

  • Page 274

    Seek previous/next buttons seek up press and release the “seek up” button on the touchscreen to tune the radio to the next listenable station or channel. During a seek up function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the s...

  • Page 275

    Media mode is entered by pushing the me- dia button located on the faceplate. Once in media mode, press the “source” button on the touchscreen and the desired mode button on the touchscreen. Disc (if equipped), usb, aux, and bluetooth (if equipped), are the media sources available. When available, y...

  • Page 276

    Usb/ipod mode usb/ipod mode is entered by either inserting a usb jump drive or ipod cable into the usb port, or by pushing the media button located on the faceplate. Once in media mode, press the “source” button on the touchscreen and select “usb/ipod.” inserting usb/ipod device gently insert the us...

  • Page 277

    Fast seek down press and hold the “left arrow” button on the touchscreen and the desired mode will begin to rewind through the current track until the button on the touchscreen is re- leased. Info press the “info” button on the touchscreen to display the current track information. Press the “x” butt...

  • Page 278

    4. Search for available devices on your bluetooth enabled device. • select bluetooth and ensure it is en- abled. Once enabled, the device will begin to search for bluetooth connections. 5. If no is selected, and you still would like to pair a device, press the “settings” button from the uconnect pho...

  • Page 279

    Uconnect 3c/3c nav uconnect 3c/3c nav at a glance uconnect 3c nav radio screen 277.

  • Page 280

    Warning! Always drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the uconnect features and applications in this vehicle. Only use uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury o...

  • Page 281

    • press the “+” or “–” buttons on the touch- screen, or press and drag over the level bar for each of the equalizer bands. The level value, which spans between plus or minus nine, is displayed at the bottom of each of the bands. Speed adjusted volume press the “speed adjusted volume” button on the t...

  • Page 282

    Warning! Always drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the uconnect features and applications in this vehicle. Only use uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury o...

  • Page 283

    Media mode the controls are accessed by pressing the desired button on the touchscreen and choosing between disc, aux, usb, bluetooth or sd card. Note: uconnect will automatically switch to the appropriate mode when something is first connected or inserted into the system. Uconnect settings the ucon...

  • Page 284

    Ipod/usb/sd card/media player control there are many ways to play music from mp3 players, usb devices, or sd cards through your vehicle's sound system. Press your media button on the touchscreen to begin. Audio jack (aux) • the aux allows a device to be plugged into the radio and utilize the vehicle...

  • Page 285

    Sd card • play songs stored on an sd card inserted into the sd card slot. • song playback can be controlled using the radio or steering wheel audio controls to play, skip to the next or previous track, browse, and list the contents. Bluetooth streaming audio if using a bluetooth equipped device you ...

  • Page 286

    Finding points of interest • from the main navigation menu, press the “where to?” button on the touchscreen, then press the “points of interest” button on the touchscreen. • select a category and then a subcategory, if necessary. • select your destination and press the “yes” button on the touchscree...

  • Page 287

    Your route is marked with a blue line on the map. If you depart from the original route, your route is recalculated. A speed limit icon could appear as you travel on major roadways. Adding a stop • to add a stop you must be navigating a route. • press the “menu” button on the touch- screen to return...

  • Page 288

    Uconnect phone operation note: the browse phone book button contains 9-1-1 uconnect 3 phone menu 1 — call/redial/hold 2 — mobile phone signal strength 3 — currently paired mobile phone 4 — mobile phone battery life 5 — mute microphone 6 — transfer to/from uconnect system 7 — uconnect phone settings ...

  • Page 289

    Uconnect 3c/3c nav phone menu 1 — favorite contacts 2 — mobile phone battery life 3 — currently paired mobile phone 4 — mobile phone signal strength 5 — mute microphone 6 — transfer to/from uconnect system 7 — conference call* 8 — manage paired mobile phones 9 — text messaging** 10 — direct dial pad...

  • Page 290

    Note: the browse phone book entries button con- tains 9-1-1. Uconnect phone features the uconnect phone feature enables you to place and receive hands-free mobile phone calls. Drivers can also place mobile phone calls using their voice or by using the buttons on the touchscreen (see voice command se...

  • Page 291

    Pairing (wirelessly connecting) your mobile phone to the uconnect system mobile phone pairing is the process of estab- lishing a wireless connection between a cel- lular phone and the uconnect system. Note: • to use the uconnect phone feature, you first must determine if your mobile phone and softwa...

  • Page 292

    Pair your iphone to search for available devices on your bluetooth enabled iphone: 1. Press the settings button. 2. Select bluetooth. • ensure the bluetooth feature is en- abled. Once enabled, the mobile phone will begin to search for bluetooth connections. 3. When your mobile phone finds the uconne...

  • Page 293

    Pair your android device to search for available devices on your bluetooth enabled android device: 1. Push the menu button. 2. Select settings. 3. Select connections. 4. Turn bluetooth setting to “on.” • ensure the bluetooth feature is en- abled. Once enabled, the mobile phone will begin to search f...

  • Page 294

    Select the android mobile phone's priority level when the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite mobile phone. Selecting “yes” will make this mobile phone the highest priority. This mo- bile phone will take precedence ove...

  • Page 295

    Changing the volume • start a dialogue by pushing the phone but- ton , then say a command for example - "help". • use the radio volume/mute rotary knob to adjust the volume to a comfortable level while the uconnect system is speaking. Note: the volume setting for uconnect is different than the audio...

  • Page 296

    3. Select located under devices next to uconnect. 4. Turn “show notifications” to on. Android devices 1. Push the menu button on the mobile phone. 2. Select settings. 3. Select connections. 4. Turn “show notifications” to on. • a pop up will appear asking you to accept a request for permission to co...

  • Page 297

    Here’s how 1. Push the uconnect phone button and wait for the beep, then say “reply.” uconnect will give the following prompt: “please say the message you would like to send.” 2. Wait for the beep and say one of the pre-defined messages. (if you are not sure, you can say “help”). Uconnect will then ...

  • Page 298

    Mobile phone won’t pair to system: • perform a hard reset in the mobile phone by removing the battery (if removable — see your mobile phone’s owner manual). • delete pairing history in mobile phone and uconnect system; usually found in phone’s bluetooth connection settings. • verify you are selectin...

  • Page 299

    Uconnect voice recognition quick tips introducing uconnect start using uconnect voice recognition with these helpful quick tips. It provides the key voice commands and tips you need to know to control your uconnect 3 or 3c/3c nav system. Uconnect 3 uconnect 3 297.

  • Page 300

    Uconnect 3c/3c nav if you see the icon on your touchscreen, you have the uconnect 3c nav system. If not, you have a uconnect 3c system. Uconnect 3c nav mul timedia 298.

  • Page 301

    Warning! Always drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the uconnect features and applications in this vehicle. Only use uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury o...

  • Page 302

    Notice the visual cues that inform you of your voice recognition system’s status. Cues ap- pear on the touchscreen. Radio use your voice to quickly get to the am, fm or siriusxm satellite radio stations you would like to hear. (subscription or included siriusxm satellite radio trial required.) push ...

  • Page 303

    Push the vr button . After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist. • change source to bluetooth • change source to ipod • change source to usb • play artist beethoven; play album greatest hits; play song moonlight sonata; pl...

  • Page 304

    Voice text reply uconnect will announce incoming text mes- sages. Push the phone button and say listen. (must have compatible device paired to uconnect system.) 1. Once an incoming text message is read to you, push the phone button . After the beep, say: reply. 2. Listen to the uconnect prompts. Aft...

  • Page 305

    1. Select “settings.” 2. Select “bluetooth.” 3. Select the (i) for the paired vehicle. 4. Turn on “show notifications.” tip: voice text reply is not compatible with iphone, but if your vehicle is equipped with siri eyes free, you can use your voice to send a text message. Climate (3c/3c nav) too hot...

  • Page 306

    Note: your vehicle may be transmitting data as authorized by the subscriber. An included trial and/or subscription is re- quired to take advantage of the uconnect access services in the next section of this guide. To register with uconnect access, press the “apps” button on the 8.4-inch touchscreen ...

  • Page 307

    2. Press the “uconnect care” button on the touchscreen. 3. A helpful uconnect care agent will regis- ter your vehicle and handle all of the details. Signing up is easy! Simply follow the steps above. Or, press the “apps ” button on the touchscreen, then select the uconnect registration app to “regis...

  • Page 308

    Sage again. After the beep, tell uconnect what you’d like to do. For instance, if you’re happy with your message, after the beep, say “send.” you must be registered with uconnect access and have a compatible map – enabled device to use your voice to send a personalized text message. For details abou...

  • Page 309

    Push the vr button . After the beep, say one of the following commands: • show fuel prices • show 5 - day weather forecast • show extended weather tip: traffic alerts are not accessible with voice command. Siri eyes free — if equipped siri lets you use your voice to send text messages, select media,...

  • Page 310

    2. Push and hold, then release the uconnect voice recognition (vr) button on the steering wheel. After you hear the familiar siri "double beep," say a command. Note: a push and release of the button will start normal embedded vr functions. The push and hold, then release of the button will start sir...

  • Page 311

    Automatic reply messages can be: • “i am driving right now, i will get back to you shortly.” • create a custom auto reply message up to 160 characters. Note: only the first 25 characters can be seen on the touchscreen while typing a custom message. While in do not disturb, conference call can be sel...

  • Page 312

    310

  • Page 313

    Customer assistance suggestions for obtaining service for your vehicle . .312 prepare for the appointment . . . . . . .312 prepare a list . . . . . . . . . . . . . . . .312 be reasonable with requests . . . . . .312 if you need assistance . . . .312 fca us llc customer center . . . . . .312 fca cana...

  • Page 314

    Suggestions for obtaining service for your vehicle prepare for the appointment if you are having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss ad- ditional charges with the service manage...

  • Page 315

    Fca canada inc. Customer center p.O. Box 1621 windsor, ontario n9a 4h6 phone: (800) 465-2001 english / (800) 387-9983 french in mexico contact av. Prolongacion paseo de la reforma, 1240 sante fe c.P. 05109 mexico, d. F. In mexico city: 5081-7568 outside mexico city: 1-800-505-1300 puerto rico and u....

  • Page 316

    The ownership experience. You will be pleased with their sincere efforts to resolve any warranty issues or related concerns. Warning! Engine exhaust (internal combustion en- gines only), some of its constituents, and certain vehicle components contain, or emit, chemicals known to the state of califo...

  • Page 317

    In canada if you believe that your vehicle has a safety defect, you should contact the customer service department imme- diately. Canadian customers who wish to report a safety defect to the cana- dian government should contact transport canada, motor vehicle de- fect investigations and recalls at 1...

  • Page 318

    316.

  • Page 319

    Access uconnect . . . . . . . . . .257, 258, 262 accessories . . . . . . . . . . . . . . . . . .251 mopar . . . . . . . . . . . . . . . . . . .251 adaptive cruise control (acc) off . . . . . . . . . . . . . . . . .149, 151 on . . . . . . . . . . . . . . . . . .149, 151 adaptive cruise control (acc) ...

  • Page 320

    Carbon monoxide warning . . . . . . . . .127 car washes . . . . . . . . . . . . . . . . . .241 changing a flat tire . . . . . . . . .184, 221 chart, tire sizing . . . . . . . . . . . . . .222 checking your vehicle for safety . . . .127 checks, safety . . . . . . . . . . . . . . . .127 child restrain...

  • Page 321

    Exhaust gas caution . . . . . . . . . . . .127 exhaust system . . . . . . . . . . . . . . .127 exterior lights . . . . . . . . . . . . . . . .129 filters air cleaner . . . . . . . . . . . . . . . .213 air conditioning . . . . . . . . . .43, 214 engine oil . . . . . . . . . . . . . . . .212 flashers ...

  • Page 322

    Lane change assist . . . . . . . . . . . . . .32 lanesense . . . . . . . . . . . . . . . . . .158 lap/shoulder belts . . . . . . . . . . . . . .94 latches . . . . . . . . . . . . . . . . . . . .129 hood . . . . . . . . . . . . . . . . . . . .47 leaks, fluid . . . . . . . . . . . . . . . . .129 life ...

  • Page 323

    Operating precautions . . . . . . . . . . . .70 outlet power . . . . . . . . . . . . . . . . . . .53 overheating, engine . . . . . . . . . . . .197 owner's manual (operator manual) . . .315 parking brake . . . . . . . . . . . . . . . .134 parksense active park assist . . . . . . .157 parksense syste...

  • Page 324

    Seat belt adjustable upper shoulder belt anchorage . . . . . . . . . . . . . . . . .97 automatic locking retractor (alr) . .99 energy management feature . . . . . .99 lap/shoulder belt operation . . . . . .95 lap/shoulder belts . . . . . . . . . . . .94 lap/shoulder belt untwisting . . . . .96 pregn...

  • Page 325

    Opening . . . . . . . . . . . . . . . . . . .46 venting . . . . . . . . . . . . . . . . . . .46 sun roof . . . . . . . . . . . . . . . . . . . .45 supplemental restraint system - air bag . . . . . . . . . . . . . . . . . . . . .102 sway control, trailer . . . . . . . . . . . . .79 system, remote sta...

  • Page 326

    Untwisting procedure, seat belt . . . . . .96 usb port . . . . . . . . . . . . . . . . . . .282 using access uconnect . . . . . . . . . . . . . . . . .262 vehicle loading . . . . . . . . . . . . . . .226 vehicle security alarm (security alarm) . . . . . . . . . . . . . .17 vehicle storage . . . . . ...

  • Page 327

    325.

  • Page 328

    326.

  • Page 329

    327.

  • Page 330

    328.

  • Page 331

    Important get warranty and other information online – you can review and print or download a copy of the owner’s manual, navigation/uconnect manuals and the limited warranties provided by fca us llc for your vehicle by visiting www.Mopar.Com (u.S.) or www.Owners.Mopar.Ca (canada). Click on the appli...

  • Page 332

    2018 cherokee user guide ©2017 fca us llc. All rights reserved. Jeep is a registered trademark of fca us llc. Whether it’s providing information about specific product features, taking a tour through your vehicle’s heritage, knowing what steps to take following an accident, or scheduling your next a...